- 16 Feb, 2016 3 commits
-
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Carlos Palminha <palminha@synopsys.com> [danvet: Squash in 2nd exynos patch.] Link: http://patchwork.freedesktop.org/patch/msgid/3768b670931572de51fca1102efa18d20dd770ee.1455540137.git.palminha@synopsys.com Link: http://patchwork.freedesktop.org/patch/msgid/4906a9925eebbe55489b1005c449b426a61c09bd.1455540137.git.palminha@synopsys.comSigned-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
- 15 Feb, 2016 2 commits
-
-
Maarten Lankhorst authored
add_all_connectors doesn't checks whether reallocation is needed, but add_one does. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Maarten Lankhorst authored
The fb helper iterates over connectors, using fb_helper->num_connectors makes it more clear what size the allocations are. Signed-off-by:
-
- 14 Feb, 2016 1 commit
-
-
Rafael Antognolli authored
So far, the i915 driver and some other drivers set it to the drm_device, which doesn't allow one to know which DP a given aux channel is related to. Changing this to be the drm_connector provides proper nesting, still allowing one to get the drm_device from it. Some drivers already set it to the drm_connector. This also removes the need to add a sysfs link for the i2c device under the connector, as it will already be there. v9: - As a side effect, drm_dp_aux_unregister() must be called before intel_connector_unregister(), as both the aux.dev and the i2c adapter dev are children of the drm_connector device now. Calling drm_dp_aux_unregister() before prevents them from being destroyed twice. v10: - move aux_fini() to connector_unregister(), instead of moving drm_dp_aux_unregister() outside of connector_register(). Signed-off-by:
Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
- 12 Feb, 2016 3 commits
-
-
Daniel Vetter authored
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be used like following: - mmap dma-buf fd - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write to mmap area 3. SYNC_END ioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device) - munmap once you don't need the buffer any more v2 (Tiago): Fix header file type names (u64 -> __u64) v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end dma-buf functions. Check for overflows in start/length. v4 (Tiago): use 2d regions for sync. v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and remove range information from struct dma_buf_sync. v6 (Tiago): use __u64 structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls. v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage. v9 (Tiago): remove useless is_dma_buf_file check. Fix sync.flags conditionals and its mask order check. Add <linux/types.h> include in dma-buf.h. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by:Stéphane Marchesin <marcheu@chromium.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Tiago Vignatti <tiago.vignatti@intel.com> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Rafael Antognolli authored
This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Rafael Antognolli authored
The module_init and module_exit functions will start here, and call the subsequent init's and exit's. v10: - Keep __init on drm_fb_helper init function. - Move MODULE_* macros to the common file. Signed-off-by:
-
- 11 Feb, 2016 6 commits
-
-
Arnd Bergmann authored
After the drm_device_is_unplugged() was removed, the 'dev' variable is now unused, and we get a warning for that: drivers/gpu/drm/msm/msm_fbdev.c: In function 'msm_fbdev_mmap': drivers/gpu/drm/msm/msm_fbdev.c:65:21: error: unused variable 'dev' [-Werror=unused-variable] This removes the variable as well. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: e9f8250f ("drm/msm: remove the drm_device_is_unplugged check") Signed-off-by:
-
Carlos Palminha authored
Other bridge drivers don't implement this optional function. Removed dummy code from dw-hdmi brigde driver. Signed-off-by:
-
Carlos Palminha authored
Removed dummy mode_fixup. Signed-off-by:
-
Carlos Palminha authored
Removed dummy mode_fixup. Signed-off-by:
-
Lukas Wunner authored
The DRM drivers i915, nouveau and radeon may be compiled with CONFIG_ACPI not set, in which case acpi_dev_present() is undefined. Add a no-op stub for apple_gmux_present() which is used if CONFIG_APPLE_GMUX is not enabled to avoid build breakage. (CONFIG_APPLE_GMUX depends on CONFIG_ACPI.) Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Carlos Palminha authored
Avoids null crash when encoders don't implement mode_fixup. Signed-off-by:
-
- 10 Feb, 2016 2 commits
-
-
Carlos Palminha authored
Avoid i2c slave encoder drivers to copy/paste code to implement functions that will only return true. Signed-off-by:
-
Rasmus Villemoes authored
The current code fails to call i2c_del_adapter on dev_prev->gmbus[0].adapter, and if the for loop above failed already at i==0, all hell breaks loose when we do the loop body for i = -1,-2,... Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-2-git-send-email-linux@rasmusvillemoes.dkReviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
- 09 Feb, 2016 23 commits
-
-
Ville Syrjälä authored
Add a few helpers to get the dimensions of the chroma plane(s). v2: Add kernel-doc (Daniel) v3: Fix kerneldoc "Returns:" style (Daniel) Uninline the functions and check for num_planes (Daniel) v4: Add the required EXPORT_SYMBOL()s Cc: dri-devel@lists.freedesktop.org Signed-off-by: -
Haixia Shi authored
This flag is only used for drm/udl. Signed-off-by:
Haixia Shi <hshi@chromium.org> Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
LABBE Corentin authored
The warning message in drm_mode_parse_command_line_for_connector miss the [drm] at beginning. This patch add it and take the opportunity to convert printk(KERN_WARNING to pr_warn() Signed-off-by:
LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by:
-
Insu Yun authored
Since drm_property_create_range can be failed in memory pressure, it needs to be checked and return -ENOMEM. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Signed-off-by:
-
Lukas Wunner authored
gmux is a microcontroller built into dual GPU MacBook Pros. On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux to temporarily switch DDC so that we can probe the panel's EDID. The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary because if either of them is disabled but gmux is present, the driver would never load, even if we're the active GPU. (vga_default_device() would evaluate to NULL and vga_switcheroo_handler_flags() would evaluate to 0.) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Signed-off-by:
-
Lukas Wunner authored
gmux is a microcontroller built into dual GPU MacBook Pros. On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux to temporarily switch DDC so that we can probe the panel's EDID. The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary because if either of them is disabled but gmux is present, the driver would never load, even if we're the active GPU. (vga_default_device() would evaluate to NULL and vga_switcheroo_handler_flags() would evaluate to 0.) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by:
-
Lukas Wunner authored
gmux is a microcontroller built into dual GPU MacBook Pros. On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux to temporarily switch DDC so that we can probe the panel's EDID. The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary because if either of them is disabled but gmux is present, the driver would never load, even if we're the active GPU. (vga_default_device() would evaluate to NULL and vga_switcheroo_handler_flags() would evaluate to 0.) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by:
-
Lukas Wunner authored
Centralize gmux' ACPI HID in a header file and add apple_gmux_present(). This can be used by other drivers to activate quirks specific to dual GPU MacBook Pros & Mac Pros. The alternative would be to hardcode DMI or PCI IDs and amend them whenever Apple introduces a new machine. Tested-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Lukas Wunner authored
The pre-retina MacBook Pro uses an LVDS panel and a gmux controller to switch the panel between its two GPUs. The panel mode in VBIOS is notoriously bogus on these machines. Use drm_get_edid_switcheroo() in lieu of drm_get_edid() on LVDS if the vga_switcheroo handler is capable of temporarily switching the panel's DDC lines to the discrete GPU. This allows us to retrieve the EDID if the panel is currently muxed to the integrated GPU. This only enables EDID probing on the pre-retina MBP (2008 - 2013). The retina MBP (2012 - present) uses eDP and gmux is not capable of switching AUX separately from the main link on these models. This will be addressed in later patches. List of pre-retina MBPs with dual GPUs, one of them AMD: [MBP 8,2 2011 intel SNB + amd turks pre-retina 15"] [MBP 8,3 2011 intel SNB + amd turks pre-retina 17"] v3: Commit newly added due to introduction of drm_get_edid_switcheroo() wrapper which drivers need to opt-in to. v5: Rebase on "vga_switcheroo: Add handler flags infrastructure", i.e. call drm_get_edid_switcheroo() only if the handler indicates that DDC is switchable. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Signed-off-by: -
Lukas Wunner authored
The pre-retina MacBook Pro uses an LVDS panel and a gmux controller to switch the panel between its two GPUs. The panel mode in VBIOS is notoriously bogus on these machines. Use drm_get_edid_switcheroo() in lieu of drm_get_edid() on LVDS if the vga_switcheroo handler is capable of temporarily switching the panel's DDC lines to the discrete GPU. This allows us to retrieve the EDID if the panel is currently muxed to the integrated GPU. Likewise, ask vga_switcheroo to switch DDC before probing LVDS connectors. This only enables EDID probing on the pre-retina MBP (2008 - 2013). The retina MBP (2012 - present) uses eDP and gmux is not capable of switching AUX separately from the main link on these models. This will be addressed in later patches. List of pre-retina MBPs with dual GPUs, either or both Nvidia: [MBP 5,1 2008 nvidia MCP79 + G96 pre-retina 15"] [MBP 5,2 2009 nvidia MCP79 + G96 pre-retina 17"] [MBP 5,3 2009 nvidia MCP79 + G96 pre-retina 15"] [MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina 15"] [MBP 6,1 2010 intel ILK + nvidia GT216 pre-retina 17"] [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] v3: Commit newly added due to introduction of drm_get_edid_switcheroo() wrapper which drivers need to opt-in to. v5: Rebase on "vga_switcheroo: Add handler flags infrastructure", i.e. call drm_get_edid_switcheroo() only if the handler indicates that DDC is switchable. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: -
Lukas Wunner authored
The pre-retina MacBook Pro uses an LVDS panel and a gmux controller to switch the panel between its two GPUs. The panel mode in VBIOS is notoriously bogus on these machines and some models have no VBIOS at all. Use drm_get_edid_switcheroo() in lieu of drm_get_edid() on LVDS if the vga_switcheroo handler is capable of temporarily switching the panel's DDC lines to the integrated GPU. This allows us to retrieve the EDID if the panel is currently muxed to the discrete GPU. This only enables EDID probing on the pre-retina MBP (2008 - 2013). The retina MBP (2012 - present) uses eDP and gmux is not capable of switching AUX separately from the main link on these models. This will be addressed in later patches. List of pre-retina MBPs with dual GPUs, one of them Intel: [MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina 15"] [MBP 6,1 2010 intel ILK + nvidia GT216 pre-retina 17"] [MBP 8,2 2011 intel SNB + amd turks pre-retina 15"] [MBP 8,3 2011 intel SNB + amd turks pre-retina 17"] [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] v3: Commit newly added due to introduction of drm_get_edid_switcheroo() wrapper which drivers need to opt-in to. v5: Rebase on "vga_switcheroo: Add handler flags infrastructure", i.e. call drm_get_edid_switcheroo() only if the handler indicates that DDC is switchable. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: -
Lukas Wunner authored
Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: Some dual graphics machines support muxing the DDC separately from the display, so make use of this functionality when reading the EDID on the inactive GPU. Also serialize drm_get_edid() with a mutex to avoid races on the DDC mux state. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-09: v3: Move vga_switcheroo calls to a wrapper around drm_get_edid() which drivers can call on muxed machines. This avoids other drivers having to go through the vga_switcheroo motions even though they are never used on a muxed platform (Thierry Reding, Daniel Vetter, Alex Deucher) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by:Pierre Moreau <pierre.morrow@free.fr> [MBP 5,3 2009 nvidia MCP79 + G96 pre-retina 15"] Tested-by:
William Brown <william@blackhats.net.au> [MBP 8,2 2011 intel SNB + amd turks pre-retina 15"] Tested-by:
-
Lukas Wunner authored
Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: The gmux allows muxing the DDC independently from the display, so support this functionality. This will allow reading the EDID for the inactive GPU, fixing issues with machines that either don't have a VBT or have invalid mode data in the VBT. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-12: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() in vga_switcheroo but this fails if the inactive client registers before the active client. v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v4: Advertise ->switch_ddc handler callback only on the pre-retina Macbook Pro. The retina uses eDP instead of LVDS and gmux no longer does the muxing itself but merely controls an external mux. That mux is incapable of switching the AUX channel separately from the main link. It's an NXP CBTL06142 (alternate parts: TI HD3SS212, Pericom PI3VDP12412, see datasheets below). v5: Rebase on "apple-gmux: Track switch state". Rebase on "vga_switcheroo: Add handler flags infrastructure". Rebase on 5d170139 ("Constify vga_switcheroo_handler"), requires 2 structs, 1x with ->switchto for pre-retinas, 1x without for retinas). Add error message if handler registration with vga_switcheroo fails. Teardowns identifying the mux: http://www.electronicproducts.com/-whatsinside_text-145.aspx http://slideshare.net/jjwu6266/apple-2012-wwdc-apple-macbook-pro-with-retina-display http://www.techrepublic.com/blog/cracking-open/teardown-shows-retina-macbook-pro-is-nearly-impossible-to-upgrade-difficult-to-work-on/ Mux Datasheets: http://www.nxp.com/documents/data_sheet/CBTL06141.pdf http://www.ti.com/lit/ds/symlink/hd3ss212.pdf https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: -
Lukas Wunner authored
gmux has 3 switch registers: * GMUX_PORT_SWITCH_DISPLAY switches the panel * GMUX_PORT_SWITCH_DDC switches the panel's DDC lines (only on pre-retinas; on retinas this is a no-op) * GMUX_PORT_SWITCH_EXTERNAL switches the external DP port(s) (only on models without Thunderbolt, i.e. introduced before 2011; those with Thunderbolt switch only HPD/AUX, not the main link) Currently we switch all 3 registers in unison. gmux does not preserve the switch state during suspend, so we currently read GMUX_PORT_SWITCH_DISPLAY before suspend and restore all 3 registers to this value on resume. With the upcoming ->switch_ddc callback, GMUX_PORT_SWITCH_DDC may temporarily contain a different value than the other 2 registers. If we happen to suspend at this moment, we'll write an incorrect value to GMUX_PORT_SWITCH_DDC on resume. Also, on models with Thunderbolt the integrated GPU is unable to drive the external DP port(s), so we want to keep GMUX_PORT_SWITCH_EXTERNAL permanently switched to the discrete GPU on those machines. Consequently we can no longer assume that GMUX_PORT_SWITCH_DISPLAY represents the correct value for all 3 registers on suspend. Track the state of all 3 registers: Add gmux_read_switch_state() and gmux_write_switch_state(). Instead of reading the switch state on every suspend, read it once on driver initialization so that we know the current switch state all the time. (This allows us to use some optimizations and shortcuts, e.g. we can skip switching DDC if we know that it's already switched to the requested GPU.) Change the ->switchto callback to use gmux_write_switch_state(). Tested-by:
-
Lukas Wunner authored
Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: -
Lukas Wunner authored
Allow handlers to declare their capabilities and allow clients to obtain that information. So far we have these use cases: * If the handler is able to switch DDC separately, clients need to probe EDID with drm_get_edid_switcheroo(). We should allow them to detect a capable handler to ensure this function only gets called when needed. * Likewise if the handler is unable to switch AUX separately, the active client needs to communicate link training parameters to the inactive client, which may then skip the AUX handshake and set up its output with these pre-calibrated values (DisplayPort specification v1.1a, section 2.5.3.3). Clients need a way to recognize such a situation. The flags for the radeon_atpx_handler and amdgpu_atpx_handler are initially set to 0, this can later on be amended with handler_flags |= VGA_SWITCHEROO_CAN_SWITCH_DDC; when a ->switch_ddc callback is added. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by:
-
Maarten Lankhorst authored
This allows iteration over encoders without requiring connection_mutex. Changes since v1: - Add a set_best_encoder helper function and update encoder_mask inside it. Changes since v2: - Relax the WARN_ON(!crtc), with explanation. - Call set_best_encoder when connector is moved between crtc's. - Add some paranoia to steal_encoder to prevent accidentally setting best_encoder to NULL. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Maarten Lankhorst authored
While we steal the encoder away from the connector the connector may be updated to use a different encoder. Without this change if 2 connectors swap encoders one of them will end up without a crtc. Signed-off-by:
-
Maarten Lankhorst authored
This should only be touched by drm_atomic_helper. Signed-off-by:
-
Maarten Lankhorst authored
This is similar to the other drm_for_each_*_mask functions. Changes since v1: - Use for_each_if Signed-off-by:
-
Maarten Lankhorst authored
This is useful for adding encoder_mask in crtc_state. Signed-off-by:
-
Tiago Vignatti authored
Userspace is the one in charge of flush CPU by wrapping mmap with begin{,end}_cpu_access. v2: Remove LLC check cause we have dma-buf sync providers now. Also, fix return before transferring ownership when mmap fails. v3: Fix return values. v4: !obj->base.filp is user triggerable, so removed the WARN_ON. Reviewed-by:Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Tiago Vignatti authored
This function is meant to be used with dma-buf mmap, when finishing the CPU access of the mapped pointer. The error case should be rare to happen though, requiring the buffer become active during the sync period and for the end_cpu_access to be interrupted. So we use a uninterruptible mutex_lock to spit out when it ever happens. v2: disable interruption to make sure errors are reported. v3: update to the new end_cpu_access API. v7: use .write = false cause it doesn't need to know whether it's write. Reviewed-by:
-
