Clear PXE mode AQ call (opcode 0x0110) is now supported in FW. So
remove the direct register write to GLLAN_RCTL_0.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix a checkpatch "LINE_SPACING: Please don't use multiple blank lines"
issue that has snuck in to the code.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The strncpy() function is being deprecated. Replace it by the safer
strscpy() and fix the following Coverity warning:

"Calling strncpy with a maximum size argument of 16 bytes on destination
array ifrr.ifr_ifrn.ifrn_name of size 16 bytes might leave the destination
string unterminated."

Notice that, unlike strncpy(), strscpy() always null-terminates the
destination string.

Addresses-Coverity-ID: 1445537 ("Buffer not null terminated")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2019-05-28

This series contains updates to e1000e, igb and igc.

Feng adds additional information on a warning message when a read of a
hardware register fails.

Gustavo A. R. Silva fixes up two "fall through" code comments so that
the checkers can actually determine that we did comment that the case
statement is falling through to the next case.

Sasha does some cleanup on the igc driver by removing duplicate
white space and removed a unneeded workaround for igc.  Adds support for
flow control to the igc driver.

Konstantin Khlebnikov reverts a previous fix which was causing a false
positive for a hardware hang.  Provides a fix so that when link is lost
the packets in the transmit queue are flushed and wakes the transmit
queue when the NIC is ready to send packets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: API and initial implementation for nexthop objects

This set contains the API and initial implementation for nexthops as
standalone objects.

Patch 1 contains the UAPI and updates to selinux struct.

Patch 2 contains the barebones code for nexthop commands, rbtree
maintenance and notifications.

Patch 3 then adds support for IPv4 gateways along with handling of
netdev events.

Patch 4 adds support for IPv6 gateways.

Patch 5 has the implementation of the encap attributes.

Patch 6 adds support for nexthop groups.

At the end of this set, nexthop objects can be created and deleted and
userspace can monitor nexthop events, but ipv4 and ipv6 routes can not
use them yet. Once the nexthop struct is defined, follow on sets add it
to fib{6}_info and handle it within the respective code before routes
can be inserted using them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow the creation of nexthop groups which reference other nexthop
objects to create multipath routes:

                      +--------------+
   +------------+   +--------------+ |
   | nh  nh_grp --->| nh_grp_entry |-+
   +------------+   +---------|----+
     ^                |       |    +------------+
     +----------------+       +--->| nh, weight |
        nh_parent                  +------------+

A group entry points to a nexthop with a weight for that hop within the
group. The nexthop has a list_head, grp_list, for tracking which groups
it is a member of and the group entry has a reference back to the parent.
The grp_list is used when a nexthop is deleted - to efficiently remove
it from groups using it.

If a nexthop group spec is given, no other attributes can be set. Each
nexthop id in a group spec must already exist.

Similar to single nexthops, the specification of a nexthop group can be
updated so that data is managed with rcu locking.

Add path selection function to account for multiple paths and add
ipv{4,6}_good_nh helpers to know that if a neighbor entry exists it is
in a good state.

Update NETDEV event handling to rebalance multipath nexthop groups if
a nexthop is deleted due to a link event (down or unregister).

When a nexthop is removed any groups using it are updated. Groups using a
nexthop a tracked via a grp_list.

Nexthop dumps can be limited to groups only by adding NHA_GROUPS to the
request.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for NHA_ENCAP and NHA_ENCAP_TYPE. Leverages the existing code
for lwtunnel within fib_nh_common, so the only change needed is handling
the attributes in the nexthop code.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Handle IPv6 gateway in a nexthop spec. If nh_family is set to AF_INET6,
NHA_GATEWAY is expected to be an IPv6 address. Add ipv6 option to gw in
nh_config to hold the address, add fib6_nh to nh_info to leverage the
ipv6 initialization and cleanup code. Update nh_fill_node to dump the v6
address.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for IPv4 nexthops. If nh_family is set to AF_INET, then
NHA_GATEWAY is expected to be an IPv4 address.

Register for netdev events to be notified of admin up/down changes as
well as deletes. A hash table is used to track nexthop per devices to
quickly convert device events to the affected nexthops.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Barebones start point for nexthops. Implementation for RTM commands,
notifications, management of rbtree for holding nexthops by id, and
kernel side data structures for nexthops and nexthop config.

Nexthops are maintained in an rbtree sorted by id. Similar to routes,
nexthops are configured per namespace using netns_nexthop struct added
to struct net.

Nexthop notifications are sent when a nexthop is added or deleted,
but NOT if the delete is due to a device event or network namespace
teardown (which also involves device events). Applications are
expected to use the device down event to flush nexthops and any
routes used by the nexthops.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

New UAPI for nexthops as standalone objects:
- defines netlink ancillary header, struct nhmsg
- RTM commands for nexthop objects, RTM_*NEXTHOP,
- RTNLGRP for nexthop notifications, RTNLGRP_NEXTHOP,
- Attributes for creating nexthops, NHA_*
- Attribute for route specs to specify a nexthop by id, RTA_NH_ID.

The nexthop attributes and semantics follow the route and RTA ones for
device, gateway and lwt encap. Unique to nexthop objects are a blackhole
and a group which contains references to other nexthop objects. With the
exception of blackhole and group, nexthop objects MUST contain a device.
Gateway and encap are optional. Nexthop groups can only reference other
pre-existing nexthops by id. If the NHA_ID attribute is present that id
is used for the nexthop. If not specified, one is auto assigned.

Dump requests can include attributes:
- NHA_GROUPS to return only nexthop groups,
- NHA_MASTER to limit dumps to nexthops with devices enslaved to the
  given master (e.g., VRF)
- NHA_OIF to limit dumps to nexthops using given device

nlmsg_route_perms in selinux code is updated for the new RTM comands.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Huazhong Tan says:

====================
code optimizations & bugfixes for HNS3 driver

This patch-set includes code optimizations and bugfixes for the HNS3
ethernet controller driver.

[patch 1/12] fixes a compile warning reported by kbuild test robot.

[patch 2/12] fixes HNS3_RXD_GRO_SIZE_M macro definition error.

[patch 3/12] adds a debugfs command to dump firmware information.

[patch 4/12 - 10/12] adds some code optimizaions and cleanups for
reset and driver unloading.

[patch 11/12 - 12/12] adds two bugfixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When hclge_bind_ring_with_vector() fails,
hclge_map_unmap_ring_to_vf_vector() returns the error
directly, so nobody will free the memory allocated by
hclge_get_ring_chain_from_mbx().

So hclge_free_vector_ring_chain() should be called no matter
hclge_bind_ring_with_vector() fails or not.

Fixes: 84e095d6 ("net: hns3: Change PF to add ring-vect binding & resetQ to mailbox")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hns3_uninit_phy() should be called before checking
HNS3_NIC_STATE_INITED flags, otherwise when this checking fails,
there is nobody to call hns3_uninit_phy().

Fixes: c8a8045b ("net: hns3: Fix NULL deref when unloading driver")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When unloading driver, the reset task should not be scheduled
anymore. If disable IRQ before cancel ongoing reset task,
the IRQ may be re-enabled by the reset task.

This patch uses HCLGE_STATE_REMOVING/HCLGEVF_STATE_REMOVING
flag to indicate that the driver is unloading, and we should
stop new coming reset service to be scheduled, otherwise,
reset service will access some resource which has been freed
by unloading.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When reset happens, the hardware reset should begin after the
driver has finished its preparatory work, otherwise it may cause
some hardware error.

Before Hardware's reset, it will wait for the driver to write
bit HCLGE_NIC_CMQ_ENABLE of register HCLGE_NIC_CSQ_DEPTH_REG
to 1, while the driver finishes its preparatory work will do that.
BTW, since some cases this register will be cleared, so it needs
some sync time before driver's writing.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hclgevf_init_client_instance() is a little bloated and there is
some duplicated code. This patch adds some cleanup for it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hclge_init_client_instance() is a little bloated and there is
some duplicated code. This patch adds some cleanup for it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When VF NIC client's init_instance() succeeds, it means this client
has been registered successfully, so we use HCLGEVF_STATE_NIC_REGISTERED
to indicate that. And before calling VF NIC client's uninit_instance(),
we clear this state.

So any operation of VF NIC client from HCLGEVF is not allowed if this
state is not set.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When PF ROCE client's init_instance() succeeds, it means this client
has been registered successfully, so we use HCLGE_STATE_ROCE_REGISTERED
to indicate that. And before calling PF ROCE client's uninit_instance(),
we clear this state.

So any operation of the ROCE client from HCLGE is not allowed if this
state is not set.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When PF NIC client's init_instance() succeeds, it means this client
has been registered successfully, so we use HCLGE_STATE_NIC_REGISTERED
to indicate that. And before calling PF NIC client's uninit_instance(),
we clear this state.

So any operation of PF NIC client from HCLGE is not allowed if this
state is not set.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch prints firmware statistics information.

debugfs command:
echo dump m7 info > cmd

estuary:/dbg/hns3/0000:7d:00.0$ echo dump m7 info > cmd
[  172.577240] hns3 0000:7d:00.0: 0x00000000  0x00000000  0x00000000
[  172.583471] hns3 0000:7d:00.0: 0x00000000  0x00000000  0x00000000
[  172.589552] hns3 0000:7d:00.0: 0x00000030  0x00000000  0x00000000
[  172.595632] hns3 0000:7d:00.0: 0x00000000  0x00000000  0x00000000
estuary:/dbg/hns3/0000:7d:00.0$
Signed-off-by: Zhongzhu Liu <liuzhongzhu@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to hardware user menual, the GRO_SIZE is 14 bits width,
the HNS3_RXD_GRO_SIZE_M is 10 bits width now, which may cause
hardware GRO received packet error problem.

Fixes: a6d53b97 ("net: hns3: Adds GRO params to SKB for the stack")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ifdef condition of function hclge_add_fd_entry_by_arfs() is
unnecessary. It may cause compile warning when CONFIG_RFS_ACCEL
is not chosen. This patch fixes it by removing the ifdef condition.

Fixes: d93ed94f ("net: hns3: add aRFS support for PF")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

in set_rx_mode, __dev_mc_sync and netdev_for_each_mc_addr will
repeatedly set the multicast mac address. so we delete this loop.
Signed-off-by: Xue Chaojing <xuechaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
inet: frags: followup to 'inet-frags-avoid-possible-races-at-netns-dismantle'

Latest patch series ('inet-frags-avoid-possible-races-at-netns-dismantle')
brought another syzbot report shown in the third patch changelog.

While fixing the issue, I had to call inet_frags_fini() later
in IPv6 and ilowpan.

Also I believe a completion is needed to ensure proper dismantle
at module removal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

As caught by syzbot [1], the rcu grace period that is respected
before fqdir_rwork_fn() proceeds and frees fqdir is not enough
to prevent inet_frag_destroy_rcu() being run after the freeing.

We need a proper rcu_barrier() synchronization to replace
the one we had in inet_frags_fini()

We also have to fix a potential problem at module removal :
inet_frags_fini() needs to make sure that all queued work queues
(fqdir_rwork_fn) have completed, otherwise we might
call kmem_cache_destroy() too soon and get another use-after-free.

[1]
BUG: KASAN: use-after-free in inet_frag_destroy_rcu+0xd9/0xe0 net/ipv4/inet_fragment.c:201
Read of size 8 at addr ffff88806ed47a18 by task swapper/1/0

CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.2.0-rc1+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 kasan_report+0x12/0x20 mm/kasan/common.c:614
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
 inet_frag_destroy_rcu+0xd9/0xe0 net/ipv4/inet_fragment.c:201
 __rcu_reclaim kernel/rcu/rcu.h:222 [inline]
 rcu_do_batch kernel/rcu/tree.c:2092 [inline]
 invoke_rcu_callbacks kernel/rcu/tree.c:2310 [inline]
 rcu_core+0xba5/0x1500 kernel/rcu/tree.c:2291
 __do_softirq+0x25c/0x94c kernel/softirq.c:293
 invoke_softirq kernel/softirq.c:374 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:414
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806
 </IRQ>
RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61
Code: ff ff 48 89 df e8 f2 95 8c fa eb 82 e9 07 00 00 00 0f 00 2d e4 45 4b 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d d4 45 4b 00 fb f4 <c3> 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 8e 18 42 fa e8 99
RSP: 0018:ffff8880a98e7d78 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
RAX: 1ffffffff1164e11 RBX: ffff8880a98d4340 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffff8880a98d4bbc
RBP: ffff8880a98e7da8 R08: ffff8880a98d4340 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
R13: ffffffff88b27078 R14: 0000000000000001 R15: 0000000000000000
 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:571
 default_idle_call+0x36/0x90 kernel/sched/idle.c:94
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x377/0x560 kernel/sched/idle.c:263
 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:354
 start_secondary+0x34e/0x4c0 arch/x86/kernel/smpboot.c:267
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243

Allocated by task 8877:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_kmalloc mm/kasan/common.c:489 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
 kmem_cache_alloc_trace+0x151/0x750 mm/slab.c:3555
 kmalloc include/linux/slab.h:547 [inline]
 kzalloc include/linux/slab.h:742 [inline]
 fqdir_init include/net/inet_frag.h:115 [inline]
 ipv6_frags_init_net+0x48/0x460 net/ipv6/reassembly.c:513
 ops_init+0xb3/0x410 net/core/net_namespace.c:130
 setup_net+0x2d3/0x740 net/core/net_namespace.c:316
 copy_net_ns+0x1df/0x340 net/core/net_namespace.c:439
 create_new_namespaces+0x400/0x7b0 kernel/nsproxy.c:107
 unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:206
 ksys_unshare+0x440/0x980 kernel/fork.c:2692
 __do_sys_unshare kernel/fork.c:2760 [inline]
 __se_sys_unshare kernel/fork.c:2758 [inline]
 __x64_sys_unshare+0x31/0x40 kernel/fork.c:2758
 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 17:
 save_stack+0x23/0x90 mm/kasan/common.c:71
 set_track mm/kasan/common.c:79 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
 __cache_free mm/slab.c:3432 [inline]
 kfree+0xcf/0x220 mm/slab.c:3755
 fqdir_rwork_fn+0x33/0x40 net/ipv4/inet_fragment.c:154
 process_one_work+0x989/0x1790 kernel/workqueue.c:2269
 worker_thread+0x98/0xe40 kernel/workqueue.c:2415
 kthread+0x354/0x420 kernel/kthread.c:255
 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352

The buggy address belongs to the object at ffff88806ed47a00
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 24 bytes inside of
 512-byte region [ffff88806ed47a00, ffff88806ed47c00)
The buggy address belongs to the page:
page:ffffea0001bb51c0 refcount:1 mapcount:0 mapping:ffff8880aa400940 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea000282a788 ffffea0001bb53c8 ffff8880aa400940
raw: 0000000000000000 ffff88806ed47000 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88806ed47900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88806ed47980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88806ed47a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                            ^
 ffff88806ed47a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88806ed47b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 3c8fc878 ("inet: frags: rework rhashtable dismantle")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both IPv6 and 6lowpan are calling inet_frags_fini() too soon.

inet_frags_fini() is dismantling a kmem_cache, that might be needed
later when unregister_pernet_subsys() eventually has to remove
frags queues from hash tables and free them.

This fixes potential use-after-free, and is a prereq for the following patch.

Fixes: d4ad4d22 ("inet: frags: use kmem_cache for inet_frag_queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fqdir_init() is not fast path and is getting bigger.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Test the IPv6 flowlabel control and datapath interfaces:

Acquire and release the right to use flowlabels with socket option
IPV6_FLOWLABEL_MGR.

Then configure flowlabels on send and read them on recv with cmsg
IPV6_FLOWINFO. Also verify auto-flowlabel if not explicitly set.

This helped identify the issue fixed in commit 95c16925 ("ipv6:
invert flowlabel sharing check in process and user mode")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support to configure multiple prioritized TX traffic
classes with mqprio.

Configure one BD ring per TC for the moment, one netdev
queue per TC.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neil Armstrong says:

====================
net: stmmac: dwmac-meson: update with SPDX Licence identifier

Update the SPDX Licence identifier for the Amlogic Meson6 and Meson8 dwmac
glue drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The default flow control settings for the i225 device is both
'rx' and 'tx' pause frames. There is no depend on the NVM value.
This patch comes to fix this and clean up the driver code.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This change adds flow control settings. This is required to
enable the legacy flow control support.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Driver does not want to keep packets in Tx queue when link is lost.
But present code only reset NIC to flush them, but does not prevent
queuing new packets. Moreover reset sequence itself could generate
new packets via netconsole and NIC falls into endless reset loop.

This patch wakes Tx queue only when NIC is ready to send packets.

This is proper fix for problem addressed by commit 0f9e980b
("e1000e: fix cyclic resets at link up with active tx").
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This reverts commit 0f9e980b.

That change cased false-positive warning about hardware hang:

e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
e1000e 0000:00:1f.6 eth0: Detected Hardware Unit Hang:
   TDH                  <0>
   TDT                  <1>
   next_to_use          <1>
   next_to_clean        <0>
buffer_info[next_to_clean]:
   time_stamp           <fffba7a7>
   next_to_watch        <0>
   jiffies              <fffbb140>
   next_to_watch.status <0>
MAC Status             <40080080>
PHY Status             <7949>
PHY 1000BASE-T Status  <0>
PHY Extended Status    <3000>
PCI Status             <10>
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

Besides warning everything works fine.
Original issue will be fixed property in following patch.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Joseph Yasi <joe.yasi@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203175Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Enables a resend request after the completion timeout workaround is not
relevant for i225 device. This patch is clean code relevant this
workaround.
Minor cosmetic fixes, replace the 'spaces' with 'tabs'
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Few function pointers from phy_operations structure were unused.
This patch cleans those.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>