- 04 Feb, 2021 1 commit
-
-
Colin Ian King authored
There is a spelling mistake in a drm_dbg message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210203110803.17894-1-colin.king@canonical.com
-
- 02 Feb, 2021 5 commits
-
-
Jani Nikula authored
Merge tag 'topic/drm-device-pdev-2021-02-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next Driver Changes: - drm/i915: Remove references to struct drm_device.pdev Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. v6: * also remove assignment in selftests/ in a later patch (Chris) v5: * remove assignment in later patch (Chris) v3: * rebased v2: * move gt/ and gvt/ changes into separate patches Signed-off-by:
-
Jani Nikula authored
Merge tag 'topic/adl-s-enabling-2021-02-01-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next Driver Changes: - Add basic support for Alder Lake S, to be shared between drm-intel-next and drm-intel-gt-next Signed-off-by:
-
- 01 Feb, 2021 10 commits
-
-
Aditya Swarup authored
- Extend Wa_1606931601 and Wa_1409804808 to ADL-S. - Extend Wa_14010919138 and Wa_14010229206 to ADL-S (Madhumitha) - Extend Wa_22010271021 to ADLS (cyokoyam) v2: - Extend Wa_1409804808 and remove unnecessary branching/redundant adls workaround placeholder functions. - Split WAs properly based on previous platforms and applicable ADLS WA. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Signed-off-by:
Aditya Swarup <aditya.swarup@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-9-aditya.swarup@intel.com
-
Aditya Swarup authored
- Extend permanent driver WA Wa_1409767108, Wa_14010685332 and Wa_14011294188 to adl-s. - Extend permanent driver WA Wa_1606054188 to adl-s. - Add Wa_14011765242 for adl-s A0 stepping. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Tejas Upadhyay authored
Just like RKL, the ADL_S platform also has different memory characteristics from past platforms. Update the values used by our memory bandwidth calculations accordingly. v2: Fix minor nitpick for shifting ADLS case above RKL(based on platform order).(mdroper) Bspec: 64631 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Load DMC on ADL_S v2.01. This is the first offcial release of DMC for ADL_S. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
-
José Roberto de Souza authored
- As RKL and ADL-S only have 5 planes, primary and 4 sprites and the cursor plane, let's group the handling together under HAS_D12_PLANE_MINIMIZATION. - Also use macro to select pipe irq fault error mask. BSpec: 49251 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matt Roper authored
ADL-S, like RKL, uses the same internal device ID for the GuC and HuC as TGL did, making them all firmware-compatible. Let's re-use TGL's firmware for ADL-S. Bspec: 50668 Cc: John Harrison <John.C.Harrison@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Lucas De Marchi authored
TGL power wells can be re-used for ADL-S with the exception of the fake power well for TC_COLD, just like DG-1. BSpec: 53597 Bspec: 49231 Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Matt Roper authored
ADL-S switches up which PHYs are considered a master to other PHYs; PHY-C is no longer a master, but PHY-D is now. Bspec: 49291 Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Jani Nikula authored
Make the child device details easier to read by turning this: [drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] VBT HDMI level shift for port B: 8 [drm:parse_ddi_port [i915]] VBT DP max link rate for port B: 810000 [drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] VBT HDMI level shift for port C: 8 [drm:parse_ddi_port [i915]] VBT (e)DP boost level for port C: 3 [drm:parse_ddi_port [i915]] VBT HDMI boost level for port C: 1 [drm:parse_ddi_port [i915]] VBT DP max link rate for port C: 810000 into this: [drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] Port B VBT HDMI level shift: 8 [drm:parse_ddi_port [i915]] Port B VBT DP max link rate: 810000 [drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] Port C VBT HDMI level shift: 8 [drm:parse_ddi_port [i915]] Port C VBT (e)DP boost level: 3 [drm:parse_ddi_port [i915]] Port C VBT HDMI boost level: 1 [drm:parse_ddi_port [i915]] Port C VBT DP max link rate: 810000 Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Juston Li authored
Like the patch to disable QSES for HDCP 1.4 over MST https://patchwork.freedesktop.org/patch/415297/ the HDCP2.2 spec doesn't require QSES as well and we've seen QSES not supported on a couple HDCP2.2 docks so far (Dell WD19 and Lenovo LDC-G2) Remove it for now until we get a better idea of how widely supported QSES is and how to support it optionally. Signed-off-by:
Juston Li <juston.li@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
-
- 29 Jan, 2021 14 commits
-
-
Ville Syrjälä authored
We shouldn't really trust tc_mode on non-TC PHYs since we never initialize it explicitly. So let's check for the PHY type first. Fortunately TC_PORT_TBT_ALT happens to be zero so I don't think there's an actual bug here, just a possibility for a future one if someone rearranges the enum values. Signed-off-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
The documented programming sequence indicates the correct point for the vswing programming is just before we enable the DDI. Make it so. Signed-off-by:
-
Ville Syrjälä authored
Currently we only explicitly power up the combo PHY lanes for DP. The spec says we should do it for HDMI as well. Cc: stable@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
Reduce the copypasta by pulling the combo PHY lane power up stuff into a helper. We'll have a third user soon. Cc: stable@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
In thunderbolt mode the PHY is owned by the thunderbolt controller. We are not supposed to touch it. So skip the vswing programming as well (we already skipped the other steps not applicable to TBT). Touching this stuff could supposedly interfere with the PHY programming done by the thunderbolt controller. Cc: stable@vger.kernel.org Signed-off-by:
-
Imre Deak authored
Atm, the driver programs explicitly the default transparent link training mode (0x55) to DP_PHY_REPEATER_MODE even if no LTTPRs are detected. This conforms to the spec (3.6.6.1): "DP upstream devices that do not enable the Non-transparent mode of LTTPRs shall program the PHY_REPEATER_MODE register (DPCD Address F0003h) to 55h (default) prior to link training" however writing the default value to this DPCD register seems to cause occasional link training errors at least for a DELL WD19TB TBT dock, when no LTTPRs are detected. Writing to DP_PHY_REPEATER_MODE will also cause an unnecessary timeout on systems without any LTTPR. To fix the above two issues let's assume that setting the default mode is redundant when no LTTPRs are detected. Keep the existing behavior and program the default mode if more than 8 LTTPRs are detected or in case the read from DP_PHY_REPEATER_CNT returns an invalid value. References: https://gitlab.freedesktop.org/drm/intel/-/issues/2801Signed-off-by:
Khaled Almahallawy <khaled.almahallawy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210118183143.1145707-1-imre.deak@intel.com
-
Ville Syrjälä authored
Add support for async flips on vlv/chv. Unlike all the other platforms vlv/chv do not use the async flip bit in DSPCNTR and instead we select between async vs. sync flips based on the surface address register. The normal DSPSURF generates sync flips DSPADDR_VLV generates async flips. And as usual the interrupt bits are different from the other platforms. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
Karthik B S <karthik.b.s@intel.com>
-
Ville Syrjälä authored
Add support for async flips on ivb/hsw. Again no need for any workarounds and just have to deal with the interrupt bits being shuffled around a bit. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Add support for async flips on ivb/hsw. Unlike bdw+ we don't need any workarounds to disable async flips. Apart from that the only real difference from the bdw implementation is the location of the flip_done interrupt bits. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Implement async flip support for BDW. The implementation is similar to the skl+ code. And just like skl/bxt/glk bdw also needs the disable w/a, thus we need to plumb the desired state of the async flip all the way down to i9xx_plane_ctl_crtc(). According to the spec we do need to bump the surface alignment to 256KiB for this. Async flips require an X-tiled buffer so we don't have to worry about linear. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Limit pre-skl plane stride to below 4k or 8k pixels (depending on the platform). We do this in order guarantee that TILEOFF/OFFSET.x does not get too big. Currently this is not a problem as we align SURF to 4k, and so TILEOFF/OFFSET only have to deal with a single tile's worth of pixels. But for async flips we're going to have to bump SURF alignment to 256k, and thus we can no longer guarantee TILEOFF/OFFSET.x will stay within acceptable bounds. We can avoid this by borrowing a trick from the skl+ code and limit the max plane stride to whatever value we can fit into TILEOFF/OFFSET.x. The slight downside is that we may end up doing GTT remapping in a few more cases where previously we did not have to. But since that will only happen with huge buffers I'm not really concerned about it. Signed-off-by:
-
José Roberto de Souza authored
As it now it is always required for GEN12+ the is_16gb_dimm name do not make sense for GEN12+. v2: - Updated comment on top of "dram_info->wm_lv_0_adjust_needed = !IS_GEN9_LP(i915);" Reviewed-by:
-
José Roberto de Souza authored
Up to now we were reading some DRAM information from MCHBAR register and from pcode what is already not good but some GEN12(TGL-H and ADL-S) platforms have MCHBAR DRAM information in different offsets. This was notified to HW team that decided that the best alternative is always apply the 16gb_dimm watermark adjustment for GEN12+ platforms and read the remaning DRAM information needed to other display programming from pcode. So here moving the DRAM pcode function to intel_dram.c, removing the duplicated fields from intel_qgv_info, setting and using information from dram_info. v2: - bring back num_points to intel_qgv_info as num_qgv_point can be overwritten in icl_get_qgv_points() - add gen12_get_dram_info() and simplify gen11_get_dram_info() Reviewed-by:
-
José Roberto de Souza authored
Valid, ranks and bandwidth_kbps are set into dram_info but are not used anywhere else so nuking it. Reviewed-by:
-
- 28 Jan, 2021 3 commits
-
-
Imre Deak authored
Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit) value for MST streams if the link parameters (link rate or lane count) are limited in a way independent of the sink capabilities (reported by DPCD). One example of such a limitation is when a MUX between the sink and source connects only a limited number of lanes to the display and connects the rest of the lanes to other peripherals (USB). Another issue is that atm MST core calculates the divider based on the backwards compatible DPCD (at address 0x0000) vs. the extended capability info (at address 0x2200). This can result in leaving some part of the MST BW unused (For instance in case of the WD19TB dock). Fix the above two issues by calculating the PBN divider value based on the rate and lane count link parameters that the driver uses for all other computation. Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977 Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Ville Syrjala <ville.syrjala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com
-
Imre Deak authored
This function will be needed by the next patch where the driver calculates the BW based on driver specific parameters, so export it. At the same time sanitize the function params, passing the more natural link rate instead of the encoding of the same rate. v2: - Fix function documentation. (Lyude) Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-1-imre.deak@intel.com
-
Sean Paul authored
The HDCP 1.4 spec does not require the QUERY_STREAM_ENCRYPTION_STATUS check, it was always a nice-to-have. After deploying this across various devices, we've determined that some MST bridge chips do not properly support this call for HDCP 1.4 (namely Synaptics and Realtek). I had considered creating a quirk for this, but I think it's more prudent to just disable the check entirely since I don't have an idea how widespread support is. Changes in v2: -Rebased on -tip Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
- 27 Jan, 2021 3 commits
-
-
Andres Calderon Jaramillo authored
Prevent the ICL HDR plane pipeline from performing YUV color range correction twice when the input is in limited range. This is done by removing the limited-range code from icl_program_input_csc(). Before this patch the following could happen: user space gives us a YUV buffer in limited range; per the pipeline in [1], the plane would first go through a "YUV Range correct" stage that expands the range; the plane would then go through the "Input CSC" stage which would also expand the range because icl_program_input_csc() would use a matrix and an offset that assume limited-range input; this would ultimately cause dark and light colors to appear darker and lighter than they should respectively. This is an issue because if a buffer switches between being scanned out and being composited with the GPU, the user will see a color difference. If this switching happens quickly and frequently, the user will perceive this as a flickering. [1] https://01.org/sites/default/files/documentation/intel-gfx-prm-osrc-icllp-vol12-displayengine_0.pdf#page=281 Cc: stable@vger.kernel.org Signed-off-by:
Andres Calderon Jaramillo <andrescj@chromium.org> Signed-off-by:
-
Ville Syrjälä authored
Inform us if we're buggy and are about to exceed the size of the bitfields in the plane TILEOFF/OFFSET registers. Signed-off-by:
-
Manasi Navare authored
DSI transcoder does not support VRR and hence skip the HW state readout if its a DSI transcoder. Fixes: c7f0f437 ("drm/i915/display: Add HW state readout for VRR") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
- 26 Jan, 2021 4 commits
-
-
Matt Roper authored
ADL-S switches up which PHYs are considered a master to other PHYs; PHY-C is no longer a master, but PHY-D is now. Bspec: 49291 Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Aditya Swarup authored
- ADL-S driver internal mapping uses PORT D, E, F, G for Combo phy B, C, D and E. - Add ADLS specific port mappings for vbt port dvo settings. - Select appropriate AUX CH specific to ADLS based on port mapping. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Aditya Swarup authored
ADL-S requires TC pins to set up ddc for Combo PHY B, C, D and E. Combo PHY A still uses the old ddc pin mapping. From VBT, ddc pin info suggests the following mapping: VBT DRIVER DDI B->ddc_pin=2 should translate to PORT_D->0x9 DDI C->ddc_pin=3 should translate to PORT_E->0xa DDI D->ddc_pin=4 should translate to PORT_F->0xb DDI E->ddc_pin=5 should translate to PORT_G->0xc Adding pin map to facilitate this translation as we cannot use existing icl ddc pin map due to conflict with DDI B and DDI C info. Bspec:20124 v2: Replace IS_ALDERLAKE_S() with HAS_PCH_ADP() as the pin map pairing depends on the PCH being used rather than the platform.(mdroper) v3: - Modify adls_port_to_ddc_pin() to make PHY_A the special case for check, else return pin mapping based on correct arithmetic with phy offset. Remove redundant platform checks and use HAS_PCH_ADP() instead of IS_ALDERLAKE_S() in intel_hdmi_ddc_pin().(mdroper) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Aditya Swarup authored
Initialize display outputs for ADL-S. ADL-S has 5 display outputs -> 1 eDP, 2 HDMI and 2 DP++ outputs. v2: - Use PORT_TCx instead of PORT_D,E.. to stay consistent with other platforms.(mdroper) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
