- 22 Aug, 2021 34 commits
-
-
Heiner Kallweit authored
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to simplify the code. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Use pci_vpd_alloc() to dynamically allocate a properly sized buffer and read the full VPD data into it. This simplifies the code, and we no longer have to make assumptions about VPD size. Signed-off-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Heiner Kallweit authored
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to simplify the code. str_id_reg and str_id_cap hold the same string and are used in the same comparison. This doesn't make sense, use one string str_id instead. Signed-off-by:
-
Heiner Kallweit authored
Use pci_vpd_alloc() to dynamically allocate a properly sized buffer and read the full VPD data into it. This simplifies the code, and we no longer have to make assumptions about VPD size. Signed-off-by:
-
Heiner Kallweit authored
Use swab32s() instead of open-coding it. Signed-off-by:
-
Heiner Kallweit authored
Use pci_vpd_find_ro_info_keyword() to search for keywords in VPD to simplify the code. Signed-off-by:
-
Heiner Kallweit authored
This is the same as 37838aa4 "sfc: Search VPD with pci_vpd_find_ro_info_keyword()", just for the falcon chip version. Signed-off-by:
-
Heiner Kallweit authored
This is the same as 5119e20f "sfc: Read VPD with pci_vpd_alloc()", just for the falcon chip version. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Refactor parsing configuration The Spectrum ASIC has a configurable limit on how deep into the packet it parses. By default, the limit is 96 bytes. There are several cases where this parsing depth is not enough and there is a need to increase it: Decapsulation of VxLAN packets and timestamping of PTP packets. Currently, parsing depth API is maintained as part of VxLAN module, because the MPRS register which configures parsing depth also configures UDP destination port number used for VxLAN encapsulation and decapsulation. However, in addition to two above mentioned users of this API, the multipath hash code also needs to invoke it in order to correctly hash based on inner fields of IPv6-in-IPv6 packets. Upcoming support for IPv6-in-IPv6 tunneling will add another user, as without increasing the parsing depth such packets cannot be properly decapsulated. Therefore, this patchset refactors the parsing configuration API and moves it out of the VxLAN module to the main driver code. Tested using existing selftests. Patch set overview: Patch #1 adds the new parsing configuration infrastructure. Patch #2 converts existing users to the new infrastructure. Patch #3 deletes the old infrastructure. Patch #4 calls the new infrastructure from the multipath hash code. ==================== Signed-off-by: -
Amit Cohen authored
Commit 01848e05 ("mlxsw: spectrum_router: Add support for inner layer 3 multipath hash policy") and commit daeabf89 ("mlxsw: spectrum_router: Add support for custom multipath hash policy") added support for multipath hash policies where the hash is calculated based on inner packet fields. For IPv6-in-IPv6 packets, the default parsing depth (96 bytes) is not enough when these policies are used. Therefore, for such cases, call the new API to increase / decrease the parsing depth as necessary. Care is taken to ensure the API is not called multiple times. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Amit Cohen authored
The previous patches added new API to handle parsing depth and converted the existing code to use it. Remove the old infrastructure which is not needed anymore. Signed-off-by:
-
Amit Cohen authored
Convert VxLAN and PTP modules to increase parsing depth using new API that was added in the previous patch. Separate MPRS register's configuration to VxLAN related configuration and parsing depth configuration. Handle each one using the appropriate API. Signed-off-by:
-
Amit Cohen authored
Spectrum ASICs have a configurable limit on how deep into the packet they parse. By default, the limit is 96 bytes. There are several cases where this parsing depth is not enough and there is a need to increase it. Currently, increasing parsing depth is maintained as part of VxLAN module, because the MPRS register which configures parsing depth also configures UDP destination port number used for VxLAN encapsulation and decapsulation. Add an API for increasing parsing depth as part of spectrum.c code, so that it will be possible to use it from other modules. In addition, add an API for setting UDP destination port and protect it using a dedicated lock for saving parsing configurations. The lock is needed as not all the callers hold RTNL lock. Maintain a counter for increased parsing depth consumers. For first consumer subscription, increase the parsing depth and for last consumer unsubscription, set parsing depth to default value. Signed-off-by:
-
David S. Miller authored
Sunil Goutham says: ==================== octeontx2: Miscellaneous fixes This patch series contains a bunch of miscellaneous fixes for various issues like - Free unallocated memory during driver unload - HW reading transmit descriptor from wrong address - VF VLAN strip offload MCAM entry installation failure - Pkts not being distributed across queues in RSS context - Wrong interface backpressure configuration for NIX1 block on 98xx - etc ==================== Signed-off-by: -
Geetha sowjanya authored
RVU SMMU widget stores the final translated PA at RVU_AF_SMMU_TLN_FLIT0<57:18> instead of FLIT1 register. This patch fixes the address translation logic to use the correct register. Fixes: 893ae972 ("octeontx2-af: cn10k: Support configurable LMTST regions") Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
-
Sunil Goutham authored
Otherthan setting action as RSS in NPC MCAM entry, RSS flowkey algorithm index also needs to be set. Otherwise whatever algorithm is defined at flowkey index '0' will be considered by HW and pkt flows will be distributed as such. Fix this by saving the flowkey index sent by admin function while initializing RSS and then use it when framing MCAM rules. Fixes: 81a43620 ("octeontx2-pf: Add RSS multi group support") Signed-off-by:
-
Sunil Goutham authored
Whenever user changes interface MAC address both default DMAC based MCAM rule and VLAN offload (for strip) rules are updated with new MAC address. To update or install VLAN offload rule PF driver needs interface's receive channel info, which is retrieved from admin function at the time of NIXLF initialization. If user changes MAC address before interface is UP, VLAN offload rule installation will fail and throw error as receive channel is not valid. To avoid this, skip VLAN offload rule installation if netdev is not UP. This rule will anyway be reinslatted as part of open() call. Fixes: fd9d7859 ("octeontx2-pf: Implement ingress/egress VLAN offload") Signed-off-by:
-
Geetha sowjanya authored
Bandwidth profiles (ipolicer structure)is implemented only on CN10K platform. But current code try to free the ipolicer memory without checking the capibility flag leading to driver crash on OCTEONTX2 platform. This patch fixes the issue by add capability flag check. Fixes: e8e095b3 ("octeontx2-af: cn10k: Bandwidth profiles config support") Signed-off-by:
-
Geetha sowjanya authored
CN10K platform requires physically contiguous memory for LMTST operations which goes beyond a single page. Not having physically contiguous memory will result in HW fetching transmit descriptors from a wrong memory location. Hence use DMA_ATTR_FORCE_CONTIGUOUS attribute while allocating LMTST regions. Signed-off-by:
-
Naveen Mamindlapalli authored
This patch corrects the erroneous vlan priority mask field that was send to npc_install_flow_req. Fixes: 1d4d9e42 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic") Signed-off-by:
Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by:
-
Hariprasad Kelam authored
Supported link modes are updated by firmware in shared structure per interface. Kernel uses this value to display supported link modes via ethtool. Currently there is extra validation that firmware updated modes are validated against internal list of supported modes. As intenal list of supported modes are not updated frequently new modes supported by firmware are not updated to ethtool. Hence remove extra validation and report all firmware updated modes. Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
-
Geetha sowjanya authored
Print debug message if any of the RVU hardware blocks reset fails. Signed-off-by:
-
Subbaraya Sundeep authored
As per hardware the base channel number configured for programmable channels of a block must be multiple of number of channels of that block. This condition is not met for SDP base channel currently. Hence this patch ensures all the base channel numbers of all blocks are multiple of number of channels present in the blocks. Also instead of hardcoding SDP number of channels the same is read from the NIX_AF_CONST1 register. Fixes: 242da439 ("octeontx2-af: cn10k: Add support for programmable") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
Subbaraya Sundeep authored
'bp_ena' in Aura context is NIX block index, setting it zero will always backpressure NIX0 block, even if NIXLF belongs to NIX1. Hence fix this by setting it appropriately based on NIX block address. Signed-off-by:
-
Rafał Miłecki authored
This helps validating DTS files. Introduced example binding changes: 1. Fixed reg formatting 2. Swapped #address-cells and #size-cells incorrect values 3. Renamed node: s/phy/ethernet-phy/ Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== DSA documentation updates for v5.15 There were some documentation-visible changes made to DSA in the net-next tree for v5.15. There may be more, but these are the ones I am aware of. ==================== Signed-off-by: -
Vladimir Oltean authored
Two new methods have been introduced, add some verbiage about what they do. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
This function has disappeared in commit edac6f63 ("Revert "net: dsa: Allow drivers to filter packets they can decode source port from""). Also, since commit 4e500251 ("net: dsa: generalize overhead for taggers that use both headers and trailers"), the next paragraph is no longer true (it is still discouraged to do that, but it is now supported, so no point in mentioning it). Delete. Signed-off-by:
-
Vladimir Oltean authored
Remove the paragraphs that talk about the various modes of traffic support, bridging with foreign interfaces, etc etc. There is nothing that the user needs to know now, it should all work out of the box as expected. Signed-off-by:
-
Vladimir Oltean authored
The sja1105 driver has removed its devlink params, so there is nothing to see here. Signed-off-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: enable automatic suspend At long last, the first patch in this series enables automatic suspend managed by the power management core. The remaining two just rename things to be "power" oriented rather than "clock" oriented. ==================== Signed-off-by: -
Alex Elder authored
Finally, rename "ipa_clock.c" to be "ipa_power.c" and "ipa_clock.h" to be "ipa_power.h". Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Rename a number of functions to clarify that there is no longer a notion of an "IPA clock," but rather that the functions are more generally related to IPA power management. ipa_clock_enable() -> ipa_power_enable() ipa_clock_disable() -> ipa_power_disable() ipa_clock_rate() -> ipa_core_clock_rate() ipa_clock_init() -> ipa_power_init() ipa_clock_exit() -> ipa_power_exit() Rename the ipa_clock structure to be ipa_power. Rename all variables and fields using that structure type "power" rather than "clock". Rename the ipa_clock_data structure to be ipa_power_data, and more broadly, just substitute "power" for "clock" in places that previously represented things related to the "IPA clock". Update comments throughout. Signed-off-by:
-
Alex Elder authored
Use runtime power management autosuspend. Up until this point, we only suspended the IPA hardware for system suspend; now we'll suspend it aggressively using runtime power management, setting the initial autosuspend delay to half a second of inactivity. Replace pm_runtime_put() calls with pm_runtime_put_autosuspend(), call pm_runtime_mark_last_busy() before each of those. In places where we're shutting things down, or decrementing power references for errors, use pm_runtime_put_noidle() instead. Finally, remove ipa_runtime_idle(), so the ->runtime_suspend callback will occur if idle. Signed-off-by:
-
- 20 Aug, 2021 6 commits
-
-
Jakub Kicinski authored
Merge tag 'mac80211-next-for-net-next-2021-08-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Minor updates: * BSS coloring support * MEI commands for Intel platforms * various fixes/cleanups * tag 'mac80211-next-for-net-next-2021-08-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: cfg80211: fix BSS color notify trace enum confusion mac80211: Fix insufficient headroom issue for AMSDU mac80211: add support for BSS color change nl80211: add support for BSS coloring mac80211: Use flex-array for radiotap header bitmap mac80211: radiotap: Use BIT() instead of shifts mac80211: Remove unnecessary variable and label mac80211: include <linux/rbtree.h> mac80211: Fix monitor MTU limit so that A-MSDUs get through mac80211: remove unnecessary NULL check in ieee80211_register_hw() mac80211: Reject zero MAC address in sta_info_insert_check() nl80211: vendor-cmd: add Intel vendor commands for iwlmei usage ==================== Link: https://lore.kernel.org/r/20210820105329.48674-1-johannes@sipsolutions.netSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: mcast: add support for port/vlan router control This small set adds control over port/vlan mcast router config. Initially I had added host vlan entry router control via vlan's global options but that is really unnecessary and we can use a single per-vlan option to control it both for port/vlan and host/vlan entries. Since it's all still in net-next we can convert BRIDGE_VLANDB_GOPTS_MCAST_ROUTER to BRIDGE_VLANDB_ENTRY_MCAST_ROUTER and use it for both. That makes much more sense and is easier for user-space. Patch 01 prepares the port router function to be used with port mcast context instead of port and then patch 02 converts the global vlan mcast router option to per-vlan mcast router option which directly gives us both host/vlan and port/vlan mcast router control without any additional changes. This way we get the following coherent syntax: [ port/vlan mcast router] $ bridge vlan set vid 100 dev ens20 mcast_router 2 [ bridge/vlan mcast router ] $ bridge vlan set vid 100 dev bridge mcast_router 2 instead of: $ bridge vlan set vid 100 dev bridge mcast_router 1 global The mcast_router should not be regarded as a global option, it controls the port/vlan and bridge/vlan mcast router behaviour. This is the last set needed for the initial per-vlan mcast support. Next patch-sets: - iproute2 support - selftests ==================== Signed-off-by: -
Nikolay Aleksandrov authored
The per-vlan router option controls the port/vlan and host vlan entries' mcast router config. The global option controlled only the host vlan config, but that is unnecessary and incosistent as it's not really a global vlan option, but rather bridge option to control host router config, so convert BRIDGE_VLANDB_GOPTS_MCAST_ROUTER to BRIDGE_VLANDB_ENTRY_MCAST_ROUTER which can be used to control both host vlan and port vlan mcast router config. Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Change br_multicast_set_port_router to take port multicast context as its first argument so we can later use it to control port/vlan mcast router option. Signed-off-by:
-
Sunil Goutham authored
This patch ensures that mcam flows are allocated before adding or destroying the flows. Signed-off-by:
-
jing yangyang authored
This silences the following coccinelle warning: "WARNING: sum of probable bitmasks, consider |" Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
jing yangyang <jing.yangyang@zte.com.cn> Signed-off-by:
-
