- 10 Jun, 2020 6 commits
-
-
Jakub Kicinski authored
Sphinx appears to get upset at extra spaces at the end of a literal: Documentation/networking/ethtool-netlink.rst:1032: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1034: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1036: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1089: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1091: WARNING: Inline literal start-string without end-string. Documentation/networking/ethtool-netlink.rst:1093: WARNING: Inline literal start-string without end-string. Fixes: f2bc8ad3 ("net: ethtool: Allow PHY cable test TDR data to configured") Fixes: a331172b ("net: ethtool: Add attributes for cable test TDR data") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Corentin Labbe authored
When the PHY is not working, the macb driver crash on a second try to setup it. [ 78.545994] macb e000b000.ethernet eth0: Could not attach PHY (-19) ifconfig: SIOCSIFFLAGS: No such device [ 78.655457] ------------[ cut here ]------------ [ 78.656014] kernel BUG at /linux-next/include/linux/netdevice.h:521! [ 78.656504] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 78.657079] Modules linked in: [ 78.657795] CPU: 0 PID: 122 Comm: ifconfig Not tainted 5.7.0-next-20200609 #1 [ 78.658202] Hardware name: Xilinx Zynq Platform [ 78.659632] PC is at macb_open+0x220/0x294 [ 78.660160] LR is at 0x0 [ 78.660373] pc : [<c0b0a634>] lr : [<00000000>] psr: 60000013 [ 78.660716] sp : c89ffd70 ip : c8a28800 fp : c199bac0 [ 78.661040] r10: 00000000 r9 : c8838540 r8 : c8838568 [ 78.661362] r7 : 00000001 r6 : c8838000 r5 : c883c000 r4 : 00000000 [ 78.661724] r3 : 00000010 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 78.662187] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 78.662635] Control: 10c5387d Table: 08b64059 DAC: 00000051 [ 78.663035] Process ifconfig (pid: 122, stack limit = 0x(ptrval)) [ 78.663476] Stack: (0xc89ffd70 to 0xc8a00000) [ 78.664121] fd60: 00000000 c89fe000 c8838000 c89fe000 [ 78.664866] fd80: 00000000 c11ff9ac c8838028 00000000 00000000 c0de6f2c 00000001 c1804eec [ 78.665579] fda0: c19b8178 c8838000 00000000 ca760866 c8838000 00000001 00001043 c89fe000 [ 78.666355] fdc0: 00001002 c0de72f4 c89fe000 c0de8dc0 00008914 c89fe000 c199bac0 ca760866 [ 78.667111] fde0: c89ffddc c8838000 00001002 00000000 c8838138 c881010c 00008914 c0de7364 [ 78.667862] fe00: 00000000 c89ffe70 c89fe000 ffffffff c881010c c0e8bd48 00000003 00000000 [ 78.668601] fe20: c8838000 c8810100 39c1118f 00039c11 c89a0960 00001043 00000000 000a26d0 [ 78.669343] fe40: b6f43000 ca760866 c89a0960 00000051 befe6c50 00008914 c8b2a3c0 befe6c50 [ 78.670086] fe60: 00000003 ee610500 00000000 c0e8ef58 30687465 00000000 00000000 00000000 [ 78.670865] fe80: 00001043 00000000 000a26d0 b6f43000 c89a0600 ee40ae7c c8870d00 c0ddabf4 [ 78.671593] fea0: c89ffeec c0ddabf4 c89ffeec c199bac0 00008913 c0ddac48 c89ffeec c89fe000 [ 78.672324] fec0: befe6c50 ca760866 befe6c50 00008914 c89fe000 befe6c50 c8b2a3c0 c0dc00e4 [ 78.673088] fee0: c89a0480 00000201 00000cc0 30687465 00000000 00000000 00000000 00001002 [ 78.673822] ff00: 00000000 000a26d0 b6f43000 ca760866 00008914 c8b2a3c0 000a0ec4 c8b2a3c0 [ 78.674576] ff20: befe6c50 c04b21bc 000d5004 00000817 c89a0480 c0315f94 00000000 00000003 [ 78.675415] ff40: c19a2bc8 c8a3cc00 c89fe000 00000255 00000000 00000000 00000000 000d5000 [ 78.676182] ff60: 000f6000 c180b2a0 00000817 c0315e64 000d5004 c89fffb0 b6ec0c30 ca760866 [ 78.676928] ff80: 00000000 000b609b befe6c50 000a0ec4 00000036 c03002c4 c89fe000 00000036 [ 78.677673] ffa0: 00000000 c03000c0 000b609b befe6c50 00000003 00008914 befe6c50 000b609b [ 78.678415] ffc0: 000b609b befe6c50 000a0ec4 00000036 befe6e0c befe6f1a 000d5150 00000000 [ 78.679154] ffe0: 000d41e4 befe6bf4 00019648 b6e4509c 20000010 00000003 00000000 00000000 [ 78.681059] [<c0b0a634>] (macb_open) from [<c0de6f2c>] (__dev_open+0xd0/0x154) [ 78.681571] [<c0de6f2c>] (__dev_open) from [<c0de72f4>] (__dev_change_flags+0x16c/0x1c4) [ 78.682015] [<c0de72f4>] (__dev_change_flags) from [<c0de7364>] (dev_change_flags+0x18/0x48) [ 78.682493] [<c0de7364>] (dev_change_flags) from [<c0e8bd48>] (devinet_ioctl+0x5e4/0x75c) [ 78.682945] [<c0e8bd48>] (devinet_ioctl) from [<c0e8ef58>] (inet_ioctl+0x1f0/0x3b4) [ 78.683381] [<c0e8ef58>] (inet_ioctl) from [<c0dc00e4>] (sock_ioctl+0x39c/0x664) [ 78.683818] [<c0dc00e4>] (sock_ioctl) from [<c04b21bc>] (ksys_ioctl+0x2d8/0x9c0) [ 78.684343] [<c04b21bc>] (ksys_ioctl) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) [ 78.684789] Exception stack(0xc89fffa8 to 0xc89ffff0) [ 78.685346] ffa0: 000b609b befe6c50 00000003 00008914 befe6c50 000b609b [ 78.686106] ffc0: 000b609b befe6c50 000a0ec4 00000036 befe6e0c befe6f1a 000d5150 00000000 [ 78.686710] ffe0: 000d41e4 befe6bf4 00019648 b6e4509c [ 78.687582] Code: 9a000003 e5983078 e3130001 1affffef (e7f001f2) [ 78.688788] ---[ end trace e3f2f6ab69754eae ]--- This is due to NAPI left enabled if macb_phylink_connect() fail. Fixes: 7897b071 ("net: macb: convert to phylink") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
If a listening MPTCP socket has unaccepted sockets at close time, the related msks are freed via mptcp_sock_destruct(), which in turn does not invoke the proto->destroy() method nor the mptcp_token_destroy() function. Due to the above, the child msk socket is not removed from the token container, leading to later UaF. Address the issue explicitly removing the token even in the above error path. Fixes: 79c0949e ("mptcp: Add key generation and token tree") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
The msk sk_shutdown flag is set by a workqueue, possibly introducing some delay in user-space notification. If the last subflow carries some data with the fin packet, the user space can wake-up before RCV_SHUTDOWN is set. If it executes unblocking recvmsg(), it may return with an error instead of eof. Address the issue explicitly checking for eof in recvmsg(), when no data is found. Fixes: 59832e24 ("mptcp: subflow: check parent mptcp socket on subflow state change") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
vxlan driver should be using helpers to access nexthop struct internals. Remove open check if whether nexthop is multipath in favor of the existing nexthop_is_multipath helper. Add a new helper, nexthop_has_v4, to cover the need to check has_v4 in a group. Fixes: 1274e1cc ("vxlan: ecmp support for mac fdb entries") Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
fdb nexthops are marked with a flag. For standalone nexthops, a flag was added to the nh_info struct. For groups that flag was added to struct nexthop when it should have been added to the group information. Fix by removing the flag from the nexthop struct and adding a flag to nh_group that mirrors nh_info and is really only a caching of the individual types. Add a helper, nexthop_is_fdb, for use by the vxlan code and fixup the internal code to use the flag from either nh_info or nh_group. v2 - propagate fdb_nh in remove_nh_grp_entry Fixes: 38428d68 ("nexthop: support for fdb ecmp nexthops") Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Jun, 2020 13 commits
-
-
Pablo Neira Ayuso authored
Remove function declarations that are not available in the tree anymore. Fixes: 709ffbe1 ("net: remove indirect block netdev event registration") Reported-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
tannerlove authored
getopt_long requires the last element to be filled with zeros. Otherwise, passing an unrecognized option can cause a segfault. Fixes: 16e78122 ("selftests/net: Add a test to validate behavior of rx timestamps") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
Disable frames injection in mvneta_xdp_xmit routine during hw re-configuration in order to avoid hardware hangs Fixes: b0a43db9 ("net: mvneta: add XDP_TX support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wang Hai authored
There are some memory leaks in dccp_init() and dccp_fini(). In dccp_fini() and the error handling path in dccp_init(), free lhash2 is missing. Add inet_hashinfo2_free_mod() to do it. If inet_hashinfo2_init_mod() failed in dccp_init(), percpu_counter_destroy() should be called to destroy dccp_orphan_count. It need to goto out_free_percpu when inet_hashinfo2_init_mod() failed. Fixes: c92c81df ("net: dccp: fix kernel crash on module load") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
The netif_running() test looks at __LINK_STATE_START which gets set before ndo_open() is called, there is a window of time between that and when the queues are actually ready to be run. If ionic_check_link_status() notices that the link is up very soon after netif_running() becomes true, it might try to run the queues before they are ready, causing all manner of potential issues. Since the netdev->flags IFF_UP isn't set until after ndo_open() returns, we can wait for that before we allow ionic_check_link_status() to start the queues. On the way back to close, __LINK_STATE_START is cleared before calling ndo_stop(), and IFF_UP is cleared after. Both of these need to be true in order to safely stop the queues from ionic_check_link_status(). Fixes: 49d3b493 ("ionic: disable the queues on link down") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Valentin Longchamp authored
Since the quiesce/activate rework, __netdev_watchdog_up() is directly called in the ucc_geth driver. Unfortunately, this function is not available for modules and thus ucc_geth cannot be built as a module anymore. Fix it by exporting __netdev_watchdog_up(). Since the commit introducing the regression was backported to stable branches, this one should ideally be as well. Fixes: 79dde73c ("net/ethernet/freescale: rework quiesce/activate for ucc_geth") Signed-off-by: Valentin Longchamp <valentin@longchamp.me> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
The dynamic key update for addr_list_lock still causes troubles, for example the following race condition still exists: CPU 0: CPU 1: (RCU read lock) (RTNL lock) dev_mc_seq_show() netdev_update_lockdep_key() -> lockdep_unregister_key() -> netif_addr_lock_bh() because lockdep doesn't provide an API to update it atomically. Therefore, we have to move it back to static keys and use subclass for nest locking like before. In commit 1a33e10e ("net: partially revert dynamic lockdep key changes"), I already reverted most parts of commit ab92d68f ("net: core: add generic lockdep keys"). This patch reverts the rest and also part of commit f3b0a18b ("net: remove unnecessary variables and callback"). After this patch, addr_list_lock changes back to using static keys and subclasses to satisfy lockdep. Thanks to dev->lower_level, we do not have to change back to ->ndo_get_lock_subclass(). And hopefully this reduces some syzbot lockdep noises too. Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com Cc: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
tannerlove authored
If user passed an interface option longer than 15 characters, then device.ifr_name and hwtstamp.ifr_name became non-null-terminated strings. The compiler warned about this: timestamping.c:353:2: warning: ‘strncpy’ specified bound 16 equals \ destination size [-Wstringop-truncation] 353 | strncpy(device.ifr_name, interface, sizeof(device.ifr_name)); Fixes: cb9eff09 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by: Tanner Love <tannerlove@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Fix hang due to missing notification Here's a fix for AF_RXRPC. Occasionally calls hang because there are circumstances in which rxrpc generate a notification when a call is completed - primarily because initial packet transmission failed and the call was killed off and an error returned. But the AFS filesystem driver doesn't check this under all circumstances, expecting failure to be delivered by asynchronous notification. There are two patches: the first moves the problematic bits out-of-line and the second contains the fix. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geliang Tang authored
In MPTCPOPT_RM_ADDR option parsing, the pointer "ptr" pointed to the "Subtype" octet, the pointer "ptr+1" pointed to the "Address ID" octet: +-------+-------+---------------+ |Subtype|(resvd)| Address ID | +-------+-------+---------------+ | | ptr ptr+1 We should set mp_opt->rm_id to the value of "ptr+1", not "ptr". This patch will fix this bug. Fixes: 3df523ab ("mptcp: Add ADD_ADDR handling") Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arjun Roy authored
Use vm_insert_pages() for tcp receive zerocopy. Spin lock cycles (as reported by perf) drop from a couple of percentage points to a fraction of a percent. This results in a roughly 6% increase in efficiency, measured roughly as zerocopy receive count divided by CPU utilization. The intention of this patchset is to reduce atomic ops for tcp zerocopy receives, which normally hits the same spinlock multiple times consecutively. [akpm@linux-foundation.org: suppress gcc-7.2.0 warning] Link: http://lkml.kernel.org/r/20200128025958.43490-3-arjunroy.kdev@gmail.comSigned-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Cc: David Miller <davem@davemloft.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pooja Trivedi authored
This selftest tests for cases where sendfile's 'count' parameter is provided with a size greater than the intended file size. Motivation: When sendfile is provided with 'count' parameter value that is greater than the size of the file, kTLS example fails to send the file correctly. Last chunk of the file is not sent, and the data integrity is compromised. The reason is that the last chunk has MSG_MORE flag set because of which it gets added to pending records, but is not pushed. Note that if user space were to send SSL_shutdown control message, pending records would get flushed and the issue would not happen. So a shutdown control message following sendfile can mask the issue. Signed-off-by: Pooja Trivedi <pooja.trivedi@stackpath.com> Signed-off-by: Mallesham Jatharkonda <mallesham.jatharkonda@oneconvergence.com> Signed-off-by: Josh Tway <josh.tway@stackpath.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2020-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a small update: * fix the deadlock on rfkill/wireless removal that a few people reported * fix an uninitialized variable * update wiki URLs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Jun, 2020 7 commits
-
-
Flavio Suligoi authored
In the files: - net/mac80211/rx.c - net/wireless/Kconfig the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Link: https://lore.kernel.org/r/20200605154112.16277-10-f.suligoi@asem.itSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Flavio Suligoi authored
The wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Link: https://lore.kernel.org/r/20200605154112.16277-9-f.suligoi@asem.itSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Flavio Suligoi authored
In the files: - regulatory.rst - mac80211-injection.rst the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Link: https://lore.kernel.org/r/20200605154112.16277-2-f.suligoi@asem.itSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: - Fix the build with certain Kconfig combinations for the Chelsio inline TLS device, from Rohit Maheshwar and Vinay Kumar Yadavi. - Fix leak in genetlink, from Cong Lang. - Fix out of bounds packet header accesses in seg6, from Ahmed Abdelsalam. - Two XDP fixes in the ENA driver, from Sameeh Jubran - Use rwsem in device rename instead of a seqcount because this code can sleep, from Ahmed S. Darwish. - Fix WoL regressions in r8169, from Heiner Kallweit. - Fix qed crashes in kdump mode, from Alok Prasad. - Fix the callbacks used for certain thermal zones in mlxsw, from Vadim Pasternak. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) net: dsa: lantiq_gswip: fix and improve the unsupported interface error mlxsw: core: Use different get_trend() callbacks for different thermal zones net: dp83869: Reset return variable if PHY strap is read rhashtable: Drop raw RCU deref in nested_table_free cxgb4: Use kfree() instead kvfree() where appropriate net: qed: fixes crash while running driver in kdump kernel vsock/vmci: make vmci_vsock_transport_cb() static net: ethtool: Fix comment mentioning typo in IS_ENABLED() net: phy: mscc: fix Serdes configuration in vsc8584_config_init net: mscc: Fix OF_MDIO config check net: marvell: Fix OF_MDIO config check net: dp83867: Fix OF_MDIO config check net: dp83869: Fix OF_MDIO config check net: ethernet: mvneta: fix MVNETA_SKB_HEADROOM alignment ethtool: linkinfo: remove an unnecessary NULL check net/xdp: use shift instead of 64 bit division crypto/chtls:Fix compile error when CONFIG_IPV6 is disabled inet_connection_sock: clear inet_num out of destroy helper yam: fix possible memory leak in yam_init_driver lan743x: Use correct MAC_CR configuration for 1 GBit speed ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-nextLinus Torvalds authored
Pull sparc updates from David Miller: - Rework the sparc32 page tables so that READ_ONCE(*pmd), as done by generic code, operates on a word sized element. From Will Deacon. - Some scnprintf() conversions, from Chen Zhou. - A pin_user_pages() conversion from John Hubbard. - Several 32-bit ptrace register handling fixes and such from Al Viro. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()" sparc32: mm: Only call ctor()/dtor() functions for first and last user sparc32: mm: Disable SPLIT_PTLOCK_CPUS sparc32: mm: Don't try to free page-table pages if ctor() fails sparc32: register memory occupied by kernel as memblock.memory sparc: remove unused header file nfs_fs.h sparc32: fix register window handling in genregs32_[gs]et() sparc64: fix misuses of access_process_vm() in genregs32_[sg]et() oradax: convert get_user_pages() --> pin_user_pages() sparc: use scnprintf() in show_pciobppath_attr() in vio.c sparc: use scnprintf() in show_pciobppath_attr() in pci.c tty: vcc: Fix error return code in vcc_probe() sparc32: mm: Reduce allocation size for PMD and PTE tables sparc32: mm: Change pgtable_t type to pte_t * instead of struct page * sparc32: mm: Restructure sparc32 MMU page-table layout sparc32: mm: Fix argument checking in __srmmu_get_nocache() sparc64: Replace zero-length array with flexible-array sparc: mm: return true,false in kern_addr_valid()
-
-
Martin Blumenstingl authored
While trying to use the lantiq_gswip driver on one of my boards I made a mistake when specifying the phy-mode (because the out-of-tree driver wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the following error is printed multiple times: Unsupported interface: 3 While it gives at least a hint at what may be wrong it is not very user friendly. Print the human readable phy-mode and also which port is configured incorrectly (this hardware supports ports 0..6) to improve the cases where someone made a mistake. Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Jun, 2020 14 commits
-
-
Vadim Pasternak authored
The driver registers three different types of thermal zones: For the ASIC itself, for port modules and for gearboxes. Currently, all three types use the same get_trend() callback which does not work correctly for the ASIC thermal zone. The callback assumes that the device data is of type 'struct mlxsw_thermal_module', whereas for the ASIC thermal zone 'struct mlxsw_thermal' is passed as device data. Fix this by using one get_trend() callback for the ASIC thermal zone and another for the other two types. Fixes: 6f73862f ("mlxsw: core: Add the hottest thermal zone detection") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.8 kernel cycle. It's just really boring this time. Zero core changes. Just linear development, cleanups and misc noncritical fixes. Some new drivers for very new Qualcomm and Intel chips. New drivers: - Intel Jasper Lake support. - NXP Freescale i.MX8DXL support. - Qualcomm SM8250 support. - Renesas R8A7742 SH-PFC support. Driver improvements: - Severe cleanup and modernization of the MCP23s08 driver. - Mediatek driver modularized. - Setting config supported in the Meson driver. - Wakeup support for the Broadcom BCM7211" * tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: sprd: Fix the incorrect pull-up definition pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()' pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()' pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe() pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()' pinctrl: bcm2835: Add support for wake-up interrupts pinctrl: bcm2835: Match BCM7211 compatible string dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt dt-bindings: pinctrl: stm32: Add missing interrupts property pinctrl: at91-pio4: Add COMPILE_TEST support pinctrl: Fix return value about devm_platform_ioremap_resource() MAINTAINERS: Renesas Pin Controllers are supported dt-bindings: pinctrl: ocelot: Add Sparx5 SoC support pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2 pinctrl: ocelot: Remove instance number from pin functions pinctrl: ocelot: Always register GPIO driver dt-bindings: pinctrl: rockchip: update example pinctrl: amd: Add ACPI dependency ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Not much this cycle apart from the ingenic rtc driver rework. The fixes are mainly minor issues reported by coccinelle rather than real world issues. Subsystem: - new VL flag for backup switch over Drivers: - ingenic: only support device tree - pcf2127: report battery switch over, handle nowayout" * tag 'rtc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits) rtc: pcf2127: watchdog: handle nowayout feature rtc: fsl-ftm-alarm: fix freeze(s2idle) failed to wake rtc: abx80x: Provide debug feedback for invalid dt properties rtc: abx80x: Add Device Tree matching table rtc: rv3028: Add missed check for devm_regmap_init_i2c() rtc: mpc5121: Use correct return value for mpc5121_rtc_probe() rtc: goldfish: Use correct return value for goldfish_rtc_probe() rtc: snvs: Add necessary clock operations for RTC APIs rtc: snvs: Make SNVS clock always prepared rtc: ingenic: Reset regulator register in probe rtc: ingenic: Fix masking of error code rtc: ingenic: Remove unused fields from private structure rtc: ingenic: Set wakeup params in probe rtc: ingenic: Enable clock in probe rtc: ingenic: Use local 'dev' variable in probe rtc: ingenic: Only support probing from devicetree rtc: mc13xxx: fix a double-unlock issue rtc: stmp3xxx: update contact email rtc: max77686: Use single-byte writes on MAX77620 rtc: pcf2127: report battery switch over ...
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "Intel Icelake NTB support, Intel driver bug fixes, and lots of bug fixes for ntb tests" * tag 'ntb-5.8' of git://github.com/jonmason/ntb: NTB: ntb_test: Fix bug when counting remote files NTB: perf: Fix race condition when run with ntb_test NTB: perf: Fix support for hardware that doesn't have port numbers NTB: perf: Don't require one more memory window than number of peers NTB: ntb_pingpong: Choose doorbells based on port number NTB: Fix the default port and peer numbers for legacy drivers NTB: Revert the change to use the NTB device dev for DMA allocations NTB: ntb_tool: reading the link file should not end in a NULL byte ntb_perf: avoid false dma unmap of destination address ntb_perf: increase sleep time from one milli sec to one sec ntb_tool: pass correct struct device to dma_alloc_coherent ntb_perf: pass correct struct device to dma_alloc_coherent ntb: hw: remove the code that sets the DMA mask NTB: correct ntb_peer_spad_addr and ntb_peer_spad_read comment typos ntb: intel: fix static declaration ntb: intel: add hw workaround for NTB BAR alignment ntb: intel: Add Icelake (gen4) support for Intel NTB NTB: Fix static check warning in perf_clear_test include/ntb: Fix typo in ntb_unregister_device description
-
Linus Torvalds authored
Merge tag 'apparmor-pr-2020-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor updates from John Johansen: "Features: - Replace zero-length array with flexible-array - add a valid state flags check - add consistency check between state and dfa diff encode flags - add apparmor subdir to proc attr interface - fail unpack if profile mode is unknown - add outofband transition and use it in xattr match - ensure that dfa state tables have entries Cleanups: - Use true and false for bool variable - Remove semicolon - Clean code by removing redundant instructions - Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint() - remove duplicate check of xattrs on profile attachment - remove useless aafs_create_symlink Bug fixes: - Fix memory leak of profile proxy - fix introspection of of task mode for unconfined tasks - fix nnp subset test for unconfined - check/put label on apparmor_sk_clone_security()" * tag 'apparmor-pr-2020-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: Fix memory leak of profile proxy apparmor: fix introspection of of task mode for unconfined tasks apparmor: check/put label on apparmor_sk_clone_security() apparmor: Use true and false for bool variable security/apparmor/label.c: Clean code by removing redundant instructions apparmor: Replace zero-length array with flexible-array apparmor: ensure that dfa state tables have entries apparmor: remove duplicate check of xattrs on profile attachment. apparmor: add outofband transition and use it in xattr match apparmor: fail unpack if profile mode is unknown apparmor: fix nnp subset test for unconfined apparmor: remove useless aafs_create_symlink apparmor: add proc subdir to attrs apparmor: add consistency check between state and dfa diff encode flags apparmor: add a valid state flags check AppArmor: Remove semicolon apparmor: Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
-
Roberto Sassu authored
Commit 6cc7c266 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()") added a call to ima_calc_boot_aggregate() so that the digest can be recalculated for the boot_aggregate measurement entry if the 'd' template field has been requested. For the 'd' field, only SHA1 and MD5 digests are accepted. Given that ima_eventdigest_init() does not have the __init annotation, all functions called should not have it. This patch removes __init from ima_pcrread(). Cc: stable@vger.kernel.org Fixes: 6cc7c266 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
John Johansen authored
When the proxy isn't replaced and the profile is removed, the proxy is being leaked resulting in a kmemleak check message of unreferenced object 0xffff888077a3a490 (size 16): comm "apparmor_parser", pid 128041, jiffies 4322684109 (age 1097.028s) hex dump (first 16 bytes): 03 00 00 00 00 00 00 00 b0 92 fd 4b 81 88 ff ff ...........K.... backtrace: [<0000000084d5daf2>] aa_alloc_proxy+0x58/0xe0 [<00000000ecc0e21a>] aa_alloc_profile+0x159/0x1a0 [<000000004cc9ce15>] unpack_profile+0x275/0x1c40 [<000000007332b3ca>] aa_unpack+0x1e7/0x7e0 [<00000000e25e31bd>] aa_replace_profiles+0x18a/0x1d10 [<00000000350d9415>] policy_update+0x237/0x650 [<000000003fbf934e>] profile_load+0x122/0x160 [<0000000047f7b781>] vfs_write+0x139/0x290 [<000000008ad12358>] ksys_write+0xcd/0x170 [<000000001a9daa7b>] do_syscall_64+0x70/0x310 [<00000000b9efb0cf>] entry_SYSCALL_64_after_hwframe+0x49/0xb3 Make sure to cleanup the profile's embedded label which will result on the proxy being properly freed. Fixes: 637f688d ("apparmor: switch from profiles to using labels on contexts") Signed-off-by: John Johansen <john.johansen@canonical.com>
-
John Johansen authored
Fix two issues with introspecting the task mode. 1. If a task is attached to a unconfined profile that is not the ns->unconfined profile then. Mode the mode is always reported as - $ ps -Z LABEL PID TTY TIME CMD unconfined 1287 pts/0 00:00:01 bash test (-) 1892 pts/0 00:00:00 ps instead of the correct value of (unconfined) as shown below $ ps -Z LABEL PID TTY TIME CMD unconfined 2483 pts/0 00:00:01 bash test (unconfined) 3591 pts/0 00:00:00 ps 2. if a task is confined by a stack of profiles that are unconfined the output of label mode is again the incorrect value of (-) like above, instead of (unconfined). This is because the visibile profile count increment is skipped by the special casing of unconfined. Fixes: f1bd9041 ("apparmor: add the base fns() for domain labels") Signed-off-by: John Johansen <john.johansen@canonical.com>
-
Mauricio Faria de Oliveira authored
Currently apparmor_sk_clone_security() does not check for existing label/peer in the 'new' struct sock; it just overwrites it, if any (with another reference to the label of the source sock.) static void apparmor_sk_clone_security(const struct sock *sk, struct sock *newsk) { struct aa_sk_ctx *ctx = SK_CTX(sk); struct aa_sk_ctx *new = SK_CTX(newsk); new->label = aa_get_label(ctx->label); new->peer = aa_get_label(ctx->peer); } This might leak label references, which might overflow under load. Thus, check for and put labels, to prevent such errors. Note this is similarly done on: static int apparmor_socket_post_create(struct socket *sock, ...) ... if (sock->sk) { struct aa_sk_ctx *ctx = SK_CTX(sock->sk); aa_put_label(ctx->label); ctx->label = aa_get_label(label); } ... Context: ------- The label reference count leak is observed if apparmor_sock_graft() is called previously: this sets the 'ctx->label' field by getting a reference to the current label (later overwritten, without put.) static void apparmor_sock_graft(struct sock *sk, ...) { struct aa_sk_ctx *ctx = SK_CTX(sk); if (!ctx->label) ctx->label = aa_get_current_label(); } And that is the case on crypto/af_alg.c:af_alg_accept(): int af_alg_accept(struct sock *sk, struct socket *newsock, ...) ... struct sock *sk2; ... sk2 = sk_alloc(...); ... security_sock_graft(sk2, newsock); security_sk_clone(sk, sk2); ... Apparently both calls are done on their own right, especially for other LSMs, being introduced in 2010/2014, before apparmor socket mediation in 2017 (see commits [1,2,3,4]). So, it looks OK there! Let's fix the reference leak in apparmor. Test-case: --------- Exercise that code path enough to overflow label reference count. $ cat aa-refcnt-af_alg.c #include <stdio.h> #include <string.h> #include <unistd.h> #include <sys/socket.h> #include <linux/if_alg.h> int main() { int sockfd; struct sockaddr_alg sa; /* Setup the crypto API socket */ sockfd = socket(AF_ALG, SOCK_SEQPACKET, 0); if (sockfd < 0) { perror("socket"); return 1; } memset(&sa, 0, sizeof(sa)); sa.salg_family = AF_ALG; strcpy((char *) sa.salg_type, "rng"); strcpy((char *) sa.salg_name, "stdrng"); if (bind(sockfd, (struct sockaddr *) &sa, sizeof(sa)) < 0) { perror("bind"); return 1; } /* Accept a "connection" and close it; repeat. */ while (!close(accept(sockfd, NULL, 0))); return 0; } $ gcc -o aa-refcnt-af_alg aa-refcnt-af_alg.c $ ./aa-refcnt-af_alg <a few hours later> [ 9928.475953] refcount_t overflow at apparmor_sk_clone_security+0x37/0x70 in aa-refcnt-af_alg[1322], uid/euid: 1000/1000 ... [ 9928.507443] RIP: 0010:apparmor_sk_clone_security+0x37/0x70 ... [ 9928.514286] security_sk_clone+0x33/0x50 [ 9928.514807] af_alg_accept+0x81/0x1c0 [af_alg] [ 9928.516091] alg_accept+0x15/0x20 [af_alg] [ 9928.516682] SYSC_accept4+0xff/0x210 [ 9928.519609] SyS_accept+0x10/0x20 [ 9928.520190] do_syscall_64+0x73/0x130 [ 9928.520808] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Note that other messages may be seen, not just overflow, depending on the value being incremented by kref_get(); on another run: [ 7273.182666] refcount_t: saturated; leaking memory. ... [ 7273.185789] refcount_t: underflow; use-after-free. Kprobes: ------- Using kprobe events to monitor sk -> sk_security -> label -> count (kref): Original v5.7 (one reference leak every iteration) ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd2 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd3 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd5 ... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4 ... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd6 Patched v5.7 (zero reference leak per iteration) ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 ... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593 ... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594 Commits: ------- [1] commit 507cad35 ("crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets") [2] commit 4c63f83c ("crypto: af_alg - properly label AF_ALG socket") [3] commit 2acce6aa ("Networking") a.k.a ("crypto: af_alg - Avoid sock_graft call warning) [4] commit 56974a6f ("apparmor: add base infastructure for socket mediation") Fixes: 56974a6f ("apparmor: add base infastructure for socket mediation") Reported-by: Brian Moyles <bmoyles@netflix.com> Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by: John Johansen <john.johansen@canonical.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc driver patches for 5.8-rc1 Included in here are: - habanalabs driver updates, loads - mhi bus driver updates - extcon driver updates - clk driver updates (approved by the clock maintainer) - firmware driver updates - fpga driver updates - gnss driver updates - coresight driver updates - interconnect driver updates - parport driver updates (it's still alive!) - nvmem driver updates - soundwire driver updates - visorbus driver updates - w1 driver updates - various misc driver updates In short, loads of different driver subsystem updates along with the drivers as well. All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits) habanalabs: correctly cast u64 to void* habanalabs: initialize variable to default value extcon: arizona: Fix runtime PM imbalance on error extcon: max14577: Add proper dt-compatible strings extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()' extcon: remove redundant assignment to variable idx w1: omap-hdq: print dev_err if irq flags are not cleared w1: omap-hdq: fix interrupt handling which did show spurious timeouts w1: omap-hdq: fix return value to be -1 if there is a timeout w1: omap-hdq: cleanup to add missing newline for some dev_dbg /dev/mem: Revoke mappings when a driver claims the region misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages() misc: xilinx-sdfec: cleanup return value in xsdfec_table_write() misc: xilinx-sdfec: improve get_user_pages_fast() error handling nvmem: qfprom: remove incorrect write support habanalabs: handle MMU cache invalidation timeout habanalabs: don't allow hard reset with open processes habanalabs: GAUDI does not support soft-reset habanalabs: add print for soft reset due to event habanalabs: improve MMU cache invalidation code ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core updates from Greg KH: "Here is the set of driver core patches for 5.8-rc1. Not all that huge this release, just a number of small fixes and updates: - software node fixes - kobject now sends KOBJ_REMOVE when it is removed from sysfs, not when it is removed from memory (which could come much later) - device link additions and fixes based on testing on more devices - firmware core cleanups - other minor changes, full details in the shortlog All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits) driver core: Update device link status correctly for SYNC_STATE_ONLY links firmware_loader: change enum fw_opt to u32 software node: implement software_node_unregister() kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs driver core: Remove unnecessary is_fwnode_dev variable in device_add() drivers property: When no children in primary, try secondary driver core: platform: Fix spelling errors in platform.c driver core: Remove check in driver_deferred_probe_force_trigger() of: platform: Batch fwnode parsing when adding all top level devices driver core: fw_devlink: Add support for batching fwnode parsing driver core: Look for waiting consumers only for a fwnode's primary device driver core: Move code to the right part of the file Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default"" drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish firmware_loader: move fw_fallback_config to a private kernel symbol namespace driver core: Add missing '\n' in log messages driver/base/soc: Use kobj_to_dev() API Add documentation on meaning of -EPROBE_DEFER driver core: platform: remove redundant assignment to variable ret debugfs: Use the correct style for SPDX License Identifier ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver changes for 5.8-rc1 Nothing major, but a lot of new IIO drivers are included in here, along with other core iio cleanups and changes. On the staging driver front, again, nothing noticable. No new deletions or additions, just a ton of tiny cleanups all over the tree done by a lot of different people. Most coding style, but many actual real fixes and cleanups that are nice to see. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits) staging: rtl8723bs: Use common packet header constants staging: sm750fb: Add names to proc_setBLANK args staging: most: usb: init return value in default path of switch/case expression staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason staging: vchiq: move vchiq_release_message() into vchiq staging: vchi: Get rid of C++ guards staging: vchi: Get rid of not implemented function declarations staging: vchi: Get rid of vchiq_status_to_vchi() staging: vchi: Get rid of vchi_service_set_option() staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message() staging: vchiq: Move copy callback handling into vchiq staging: vchi: Get rid of vchi_queue_user_message() staging: vchi: Get rid of vchi_service_destroy() staging: most: usb: use function sysfs_streq staging: most: usb: add missing put_device calls staging: most: usb: use correct error codes staging: most: usb: replace code to calculate array index staging: most: usb: don't use error path to exit function on success staging: most: usb: move allocation of URB out of critical section staging: most: usb: return 0 instead of variable ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver updates from Greg KH: "Here is the tty and serial driver updates for 5.8-rc1 Nothing huge at all, just a lot of little serial driver fixes, updates for new devices and features, and other small things. Full details are in the shortlog. All of these have been in linux-next with no issues for a while" * tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits) tty: serial: qcom_geni_serial: Add 51.2MHz frequency support tty: serial: imx: clear Ageing Timer Interrupt in handler serial: 8250_fintek: Add F81966 Support sc16is7xx: Add flag to activate IrDA mode dt-bindings: sc16is7xx: Add flag to activate IrDA mode serial: 8250: Support rs485 bus termination GPIO serial: 8520_port: Fix function param documentation dt-bindings: serial: Add binding for rs485 bus termination GPIO vt: keyboard: avoid signed integer overflow in k_ascii serial: 8250: Enable 16550A variants by default on non-x86 tty: hvc_console, fix crashes on parallel open/close serial: imx: Initialize lock for non-registered console sc16is7xx: Read the LSR register for basic device presence check sc16is7xx: Allow sharing the IRQ line sc16is7xx: Use threaded IRQ sc16is7xx: Always use falling edge IRQ tty: n_gsm: Fix bogus i++ in gsm_data_kick tty: n_gsm: Remove unnecessary test in gsm_print_packet() serial: stm32: add no_console_suspend support tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP ...
-