- 19 Apr, 2012 3 commits
-
-
Kuninori Morimoto authored
Current alsa_sound_last_init() was called as __initcall(). So, on current ALSA, only devices that had been properly registered at this point were shown. So, it will show "No soundcards found" if driver requests probe deferment. it's often misleading. This patch delays the timing of alsa_sound_last_init() as workaround. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviwed-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
While refactoring the mute-LED handling for HP laptops, I messed up the polarity check in a wrong way. The red (or the mute-LED if any) should appear in the muted state, corresponding to GPIO on. Reported-by:
Mikko Vinni <mmvinni@yahoo.com> Signed-off-by:
-
Takashi Iwai authored
Through the transition to the auto-parser, the support for Quanta/Gericom KN1 got broken. There are two problems behind it: - This machine doesn't like the default COEF setup for ALC260 we take now as default - BIOS doesn't set the pins correctly at all; especially the machine uses only the pin 0x0f for both headphone and speaker This patch adds the fixup as a workaround for these issues. Reported-and-tested-by:
Uros Vampl <mobile.leecher@gmail.com> Signed-off-by:
-
- 18 Apr, 2012 1 commit
-
-
Randy Dunlap authored
Fix kernel-doc warning in sound/core/vmaster.c: Warning(sound/core/vmaster.c:429): No description found for parameter 'private_data' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
- 13 Apr, 2012 1 commit
-
-
Jesper Juhl authored
In sound/pci/hda/patch_realtek.c::alc_auto_fill_dac_nids(), in the 'for (;;)' loop, if the 'badness' value returned from fill_and_eval_dacs() is negative, then we'll return from the function without freeing the memory we allocated for 'best_cfg', thus leaking. Fix the leak by kfree()'ing the memory when badness is negative. While I was there I also noticed some trailing whitespace in the function that I removed (along with all other trailing whitespace in the file) - it didn't seem worth-while to do that as two patches, so I hope it's OK that I just did it all as one patch. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
- 12 Apr, 2012 3 commits
-
-
Josh Boyer authored
A user reported that setting model=imac24 used to allow sound to work on their Mac Pro 5,1 machine. Commit 5671087f "Move ALC885 macpro and imac24 models to auto-parser" removed this model option. All Mac machines are now explicitly handled with a quirk and the auto-parser. This adds a quirk for the device found on the Mac Pro 5,1 machines. This (partially) fixes https://bugzilla.redhat.com/show_bug.cgi?id=808559 [sorted the new entry in the ID number order by tiwai] Reported-by:
Gabriel Somlo <somlo@cmu.edu> Signed-off-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Takashi Iwai authored
It's compatible with 8930G. Using the same fixup gives the proper 5.1 sound back. Reported-and-tested-by:
Dany Martineau <dany.luc.martineau@gmail.com> Cc: <stable@kernel.org> [v3.3+] Signed-off-by:
-
Takashi Iwai authored
Add GPIO1 setup explicitly for Acer Aspire 493x & co. This could be set by alc_auto_init_amp(), but it's safer to set it more explicitly in the fixup table. Signed-off-by:
-
- 11 Apr, 2012 1 commit
-
-
Takashi Iwai authored
Since there are still many Acer models that might not be covered by the current fixup table, let's add back a few typical model names so that user can test the fixup without recompiling. Signed-off-by:
-
- 10 Apr, 2012 3 commits
-
-
Fengguang Wu authored
Also remove two warnings when CONFIG_SND_DEBUG is not set: sound/pci/hda/patch_hdmi.c: In function ‘hdmi_intrinsic_event’: sound/pci/hda/patch_hdmi.c:761:6: warning: unused variable ‘eldv’ [-Wunused-variable] sound/pci/hda/patch_hdmi.c:760:6: warning: unused variable ‘pd’ [-Wunused-variable] Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Julia Lawall authored
At the point of this error-handling code, both regions and the dma have been allocated, so free it as done in previous and subsequent error-handling code. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
At the point of this error-handling code, HAVE_DSPCODEH may be undefined, so free INITCODE and PERMCODE as done elsewhere. A jump and label are introduced to avoid code duplication. Signed-off-by:
-
- 07 Apr, 2012 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/soundTakashi Iwai authored
ASoC: fixes for 3.4 A bunch of driver-specific fixes and one generic fix for the new support for platform DAPM contexts - we were picking the wrong default for the idle_bias_off setting which was meaning we weren't actually achieving any useful runtime PM on platform devices.
-
Michael Karcher authored
name pins consistently (MIC1/LINE1/HP-OUT/CD) on all controls affecting those pins. remove duplicate SET_AMP_GAIN_MUTE to 0x17/index 0 and 0x17/index 1 really select MIC1, not Mixer out for recording "Mixer out" for recording is not a "pin", adjust comment Signed-off-by:
Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by:
-
Michael Karcher authored
CX20549 (ctx5045) doesn't accept data on index 1 for output pins, as shown in the following hda-var transaction: $ hda-verb /dev/snd/hwC0D0 0x10 set_amp_gain 0xb126 nid = 0x10, verb = 0x300, param = 0xb126 value = 0x0 $ hda-verb /dev/snd/hwC0D0 0x10 get_amp_gain 0x8001 nid = 0x10, verb = 0xb00, param = 0x8001 value = 0x0 Signed-off-by:
-
Michael Karcher authored
The ID used for detection of the BenQ R55E actually identifies the Quanta TW3 ODM design, which is also used for the Gigabyte W551 laptop series. Schematics on the internet clearly indicate that the "Port C" (analog input connected to record source #4 and mixer input #4) is unconnected. Playing an audio CD through analog playback (using cdplay from cdtools) produces no sound, even with the mixer input labelled "CD" enabled, and the volume control in the CD drive set to maximum. This indicates the connection is really not present. Signed-off-by:
-
Michael Karcher authored
The "input converter" widget of the CX20459 has only one input amplifier, expose that one as "Capture Volume/Capture Switch". The actual record source selection is already exposed through the separately installed input mux. Signed-off-by:
-
Michael Karcher authored
This includes renaming "Line In" to line, also in the mixer settings. Signed-off-by:
-
Michael Karcher authored
The CX20549 has only one single input amp on it's input converter widget. Fix printing of values in the codec file in /proc/asound. Signed-off-by:
-
- 06 Apr, 2012 1 commit
-
-
Stephen Warren authored
Commit d4a2eca7 "ASoC: Tegra I2S: Remove dependency on pdev->id" changed the prototype of tegra_i2s_debug_add, but didn't update the dummy inline used when !CONFIG_DEBUG_FS. Fix that. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
- 05 Apr, 2012 4 commits
-
-
Stephen Warren authored
The ASoC core currently defaults to using STANDBY rather than OFF for idle ASoC platform devices, which causes a permanent pm_runtime_get() on them. This keeps the device active unnecessarily. This can be especially problematic when the ASoC platform device and DAI device are the same device. The distinction between OFF and STANDBY is likely not relevant for ASoC platform drivers, since they aren't analog devices. So, solve this issue by hard-coding idle_bias_off = 1 for all ASoC platform devices. If this turns out to be a problem, this value could be sourced from the snd_soc_platform_driver, similarly to soc_probe_codec(). Note: Prior to this change, this caused a large (10) runtime_active count for the Tegra I2S controller even when not in use, and a leak in that value as streams were started and stopped. This change probably hides a bug. Signed-off-by:
-
Fabio Estevam authored
Check for NULL pointer before accessing it. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Fabio Estevam authored
Doing a 'cat /sys/kernel/debug/audmux/ssi7' causes the following oops to be printed by the kernel: Uhandled fault: external abort on non-linefetch (0x008) at 0xf53b003c Internal error: : 8 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.3.0-00033-gecc726e-dirty #307) PC is at audmux_read_file+0x68/0x2f4 LR is at clk_enable+0x3c/0x48 pc : [<c001b8c8>] lr : [<c00190a0>] psr: a0000013 sp : c3ad3f38 ip : c30a4000 fp : 00000003 r10: 00001000 r9 : be83fb00 r8 : c3ad3f80 r7 : c3ad3f80 r6 : 00000007 r5 : 00031010 r4 : c30a5000 r3 : f53b0000 r2 : 0000003c r1 : 380fa100 r0 : c068dda0 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 83034000 DAC: 00000015 Process cat (pid: 1042, stack limit = 0xc3ad2270) Stack: (0xc3ad3f38 to 0xc3ad4000) 3f20: c3139180 00000000 3f40: c3bc6500 00001000 be83fb00 c3ad3f80 00001000 c3ad2000 00000000 c0095f3c 3f60: 00000003 c3bc6508 c3bc6500 be83fb00 00000000 00000000 00001000 c0096010 3f80: 00000000 00000000 b6fe2050 00000000 00001000 be83fb00 00000003 00000003 3fa0: c000eb88 c000e9e0 00001000 be83fb00 00000003 be83fb00 00001000 00000000 3fc0: 00001000 be83fb00 00000003 00000003 00000001 00000001 00000000 00000003 3fe0: 000bec8c be83fae0 0000f808 b6ea8d5c 60000010 00000003 7dff7ede 749bedf1 [<c001b8c8>] (audmux_read_file+0x68/0x2f4) from [<c0095f3c>] (vfs_read+0xb0/0x144) [<c0095f3c>] (vfs_read+0xb0/0x144) from [<c0096010>] (sys_read+0x40/0x70) [<c0096010>] (sys_read+0x40/0x70) from [<c000e9e0>] (ret_fast_syscall+0x0/0x2c) Code: e1a02186 e2822004 e3500000 e7935186 (e7937002) ---[ end trace 4d046e31309023de ]--- Fix the ssi port numbers in sysfs to fix this problem. Reported-by:
Joan Carles <joancarles@fqingenieria.es> Signed-off-by:
-
Kuninori Morimoto authored
ak4642 out_tlv is +12.0dB to -115.0 dB, and it supports mute. But current settings didn't care +1 step for mute. This patch adds it Signed-off-by:
-
- 04 Apr, 2012 1 commit
-
-
Mark Brown authored
Rather than listing every single person who works on the drivers include the mailing list where they can all be found. Leave myself as a human contact. Signed-off-by:
-
- 03 Apr, 2012 1 commit
-
-
Jarkko Nikula authored
Peter Ujfalusi has been co-maintaining sound/soc/omap/ for years but was missing from this MAINTAINERS entry. Signed-off-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by:
Liam Girdwood <lrg@ti.com> Signed-off-by:
-
- 02 Apr, 2012 3 commits
-
-
Martin Jansa authored
* fixes sound/soc/pxa/pxa2xx-i2s.c:86:2: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration] sound/soc/pxa/pxa2xx-i2s.c:86:2: error: initializer element is not constant after 23019a73 removed IOMEM definition from arch/arm/mach-pxa/include/mach/hardware.h Signed-off-by:
Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by:
-
Stephen Warren authored
Debugfs files could be accessed any time, so explicitly enable clocks when reading registers to generate debugfs file content. Signed-off-by:
-
Zeng Zhaoming authored
As manual described, VAG is an internal voltage reference of DAC/ADC, So enabled it before DAC/ADC up. One more thing should care about is VAG fully ramped down requires 400ms, wait it to avoid pop. Signed-off-by:
Zeng Zhaoming <zengzm.kernel@gmail.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
- 31 Mar, 2012 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-consoleLinus Torvalds authored
Pull virtio S3 support patches from Amit Shah: "Turns out S3 is not different from S4 for virtio devices: the device is assumed to be reset, so the host and guest state are to be assumed to be out of sync upon resume. We handle the S4 case with exactly the same scenario, so just point the suspend/resume routines to the freeze/restore ones. Once that is done, we also use the PM API's macro to initialise the sleep functions. A couple of cleanups are included: there's no need for special thaw processing in the balloon driver, so that's addressed in patches 1 and 2. Testing: both S3 and S4 support have been tested using these patches using a similar method used earlier during S4 patch development: a guest is started with virtio-blk as the only disk, a virtio network card, a virtio-serial port and a virtio balloon device. Ping from guest to host, dd /dev/zero to a file on the disk, and IO from the host on the virtio-serial port, all at once, while exercising S4 and S3 (separately) were tested. They all continue to work fine after resume. virtio balloon values too were tested by inflating and deflating the balloon." Pulling from Amit, since Rusty is off getting married (and presumably shaving people). * 's3-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console: virtio-pci: switch to PM ops macro to initialise PM functions virtio-pci: S3 support virtio-pci: drop restore_common() virtio: drop thaw PM operation virtio: balloon: Allow stats update after restore from S4
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull second try at vfs part d#2 from Al Viro: "Miklos' first series (with do_lookup() rewrite split into edible chunks) + assorted bits and pieces. The 'untangling of do_lookup()' series is is a splitup of what used to be a monolithic patch from Miklos, so this series is basically "how do I convince myself that his patch is correct (or find a hole in it)". No holes found and I like the resulting cleanup, so in it went..." Changes from try 1: Fix a boot problem with selinux, and commit messages prettied up a bit. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits) vfs: fix out-of-date dentry_unhash() comment vfs: split __lookup_hash untangling do_lookup() - take __lookup_hash()-calling case out of line. untangling do_lookup() - switch to calling __lookup_hash() untangling do_lookup() - merge d_alloc_and_lookup() callers untangling do_lookup() - merge failure exits in !dentry case untangling do_lookup() - massage !dentry case towards __lookup_hash() untangling do_lookup() - get rid of need_reval in !dentry case untangling do_lookup() - eliminate a loop. untangling do_lookup() - expand the area under ->i_mutex untangling do_lookup() - isolate !dentry stuff from the rest of it. vfs: move MAY_EXEC check from __lookup_hash() vfs: don't revalidate just looked up dentry vfs: fix d_need_lookup/d_revalidate order in do_lookup ext3: move headers to fs/ext3/ migrate ext2_fs.h guts to fs/ext2/ext2.h new helper: ext2_image_size() get rid of pointless includes of ext2_fs.h ext2: No longer export ext2_fs.h to user space mtdchar: kill persistently held vfsmount ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix incorrect usage of for_each_cpu_mask() in select_fallback_rq() sched: Fix __schedule_bug() output when called from an interrupt sched/arch: Introduce the finish_arch_post_lock_switch() scheduler callback
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates and fixes from Ingo Molnar: "It's mostly fixes, but there's also two late items: - preliminary GTK GUI support for perf report - PMU raw event format descriptors in sysfs, to be parsed by tooling The raw event format in sysfs is a new ABI. For example for the 'CPU' PMU we have: aldebaran:~> ll /sys/bus/event_source/devices/cpu/format/* -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/any -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/cmask -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/edge -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/event -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/inv -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/offcore_rsp -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/pc -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/umask those lists of fields contain a specific format: aldebaran:~> cat /sys/bus/event_source/devices/cpu/format/offcore_rsp config1:0-63 So, those who wish to specify raw events can now use the following event format: -e cpu/cmask=1,event=2,umask=3 Most people will not want to specify any events (let alone raw events), they'll just use whatever default event the tools use. But for more obscure PMU events that have no cross-architecture generic events the above syntax is more usable and a bit more structured than specifying hex numbers." * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) perf tools: Remove auto-generated bison/flex files perf annotate: Fix off by one symbol hist size allocation and hit accounting perf tools: Add missing ref-cycles event back to event parser perf annotate: addr2line wants addresses in same format as objdump perf probe: Finder fails to resolve function name to address tracing: Fix ent_size in trace output perf symbols: Handle NULL dso in dso__name_len perf symbols: Do not include libgen.h perf tools: Fix bug in raw sample parsing perf tools: Fix display of first level of callchains perf tools: Switch module.h into export.h perf: Move mmap page data_head offset assertion out of header perf: Fix mmap_page capabilities and docs perf diff: Fix to work with new hists design perf tools: Fix modifier to be applied on correct events perf tools: Fix various casting issues for 32 bits perf tools: Simplify event_read_id exit path tracing: Fix ftrace stack trace entries tracing: Move the tracing_on/off() declarations into CONFIG_TRACING perf report: Add a simple GTK2-based 'perf report' browser ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6Linus Torvalds authored
Pull PARISC misc updates from James Bottomley: "This is a couple of minor updates (fixing lws futex locking and removing some obsolete cpu_*_map calls)." * tag 'parisc-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] remove references to cpu_*_map. [PARISC] futex: Use same lock set as lws calls
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ...
-
J. Bruce Fields authored
64252c75 "vfs: remove dget() from dentry_unhash()" changed the implementation but not the comment. Cc: Sage Weil <sage@newdream.net> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Miklos Szeredi authored
Split __lookup_hash into two component functions: lookup_dcache - tries cached lookup, returns whether real lookup is needed lookup_real - calls i_op->lookup This eliminates code duplication between d_alloc_and_lookup() and d_inode_lookup(). Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Al Viro authored
Signed-off-by: -
Al Viro authored
now we have __lookup_hash() open-coded if !dentry case; just call the damn thing instead... Signed-off-by:
-
