Skip to content

L
linux
Switch branch/tag
  1. 07 Apr, 2021 13 commits
  3. 05 Apr, 2021 3 commits
  5. 02 Apr, 2021 8 commits
  7. 01 Apr, 2021 16 commits
    • Arnd Bergmann's avatar
      Merge tag 'v5.12-next-dts64' of... · 7d534c3a
      Arnd Bergmann authored 
      Merge tag 'v5.12-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

- add trivial bindings for MT8195
- fix dtbs_check warnings
- add pinmux for build-in Wifi on MT7622 evaluation borad

MT8183:
- fix USB wakeup register
- add regulator for EVB board
- add registers to mailbox consumers
- add thermal zone and trip points for CPU cooling
- Add new boards:
  * ASUS Chromebook Flip CM3
  * ASUS Chromebook Detachable CM3
  * Acer Chromebook Spin 311
  * Lenovo 10e Chromebook Tablet

MT8173:
- fix PHY property in DSI
- fix power-domain for PMIC wrapper

Pumkin:
- add MT8516 based board
- add MT8183 based board
- fix reset pin for MT8167 and MT8516 based boards

* tag 'v5.12-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (29 commits)
  arm64: dts: mediatek: fix reset GPIO level on pumpkin
  arm64: dts: mt8183: add mt8183 pumpkin board
  dt-bindings: arm64: dts: mediatek: Add mt8183-pumpkin board
  arm64: dts: mt8183: Add kukui kodama board
  arm64: dts: mt8183: Add kukui kakadu board
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-kodama
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-kakadu
  dt-bindings: arm64: dts: mediatek: Add mt8516-pumpkin board
  arm64: dts: mt7622: add ePA/eLNA pinmux for built-in WiFi
  dt-bindings: nvmem: mediatek: add support for MediaTek mt8192 SoC
  arm64: dts: mt8173: fix wrong power-domain phandle of pmic
  arm64: dts: mt8183: Configure CPU cooling
  arm64: dts: mt8183: add thermal zone node
  arm64: dts: mt8183: Add gce client reg for display subcomponents
  arm64: dts: mediatek: mt8183: fix dtbs_check warning
  arm64: dts: mediatek: mt7622: harmonize node names and compatibles
  arm64: dts: mediatek: mt8516: harmonize node names and compatibles
  arm64: dts: mediatek: mt2712: harmonize node names
  arm64: dts: mediatek: mt8173: fix dtbs_check warning
  arm64: dts: mt8173: fix property typo of 'phys' in dsi node
  ...

Link: https://lore.kernel.org/r/d1121630-5778-0955-fac7-f921174defe7@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      7d534c3a
    • Arnd Bergmann's avatar
      Merge tag 'v5.12-next-dts32' of... · 8028548b
      Arnd Bergmann authored 
      Merge tag 'v5.12-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

- fix dtbs_check warnings
- enable SMP for mt6589

* tag 'v5.12-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm: mediatek: dts: activate SMP for mt6589
  arm: dts: mt2701: harmonize node names and compatibles
  arm: dts: mt7623: harmonize node names and compatibles
  arm: dts: mt7629: harmonize node names and compatibles

Link: https://lore.kernel.org/r/be262120-6cd9-87a7-ccc3-f5c403cff66b@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      8028548b
    • Arnd Bergmann's avatar
      Merge tag 'tegra-for-5.13-arm64-dt' of... · 520f30fe
      Arnd Bergmann authored 
      Merge tag 'tegra-for-5.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree fixes for v5.12-rc6

This contains a couple of device tree fixes for the v5.12 release cycle.
These are needed for proper audio support on Jetson AGX Xavier, to boot
the Jetson Xavier NX from an SD card and to be able to suspend/resume
the Jetson TX2.

* tag 'tegra-for-5.13-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Move clocks from RT5658 endpoint to device node
  arm64: tegra: Fix mmc0 alias for Jetson Xavier NX
  arm64: tegra: Set fw_devlink=on for Jetson TX2
  arm64: tegra: Add unit-address for ACONNECT on Tegra186

Link: https://lore.kernel.org/r/20210401172622.3352990-5-thierry.reding@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      520f30fe
    • Arnd Bergmann's avatar
      Merge tag 'tegra-for-5.13-arm-dt' of... · 815bacb5
      Arnd Bergmann authored 
      Merge tag 'tegra-for-5.13-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Device tree changes for v5.13-rc1

This contains a couple of improvements and fixes for various 32-bit
Tegra-based boards.

* tag 'tegra-for-5.13-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: acer-a500: Add atmel,wakeup-method property
  ARM: tegra: Specify tps65911 as wakeup source
  ARM: tegra: Specify memory suspend OPP in device-tree
  ARM: tegra: Specify CPU suspend OPP in device-tree
  ARM: tegra: ouya: Specify all CPU cores as cooling devices
  ARM: tegra: nexus7: Specify all CPU cores as cooling devices
  ARM: tegra: acer-a500: Rename avdd to vdda of touchscreen node
  ARM: tegra: acer-a500: Specify all CPU cores as cooling devices
  ARM: tegra: acer-a500: Reduce thermal throttling hysteresis to 0.2C
  ARM: tegra: acer-a500: Enable core voltage scaling
  ARM: tegra: paz00: Enable full voltage scaling ranges for CPU and Core domains
  ARM: tegra: cardhu: Support CPU thermal throttling
  ARM: tegra: cardhu: Support CPU frequency and voltage scaling on all board variants
  ARM: tegra: ventana: Support CPU thermal throttling
  ARM: tegra: ventana: Support CPU and Core voltage scaling

Link: https://lore.kernel.org/r/20210401172622.3352990-4-thierry.reding@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      815bacb5
    • Arnd Bergmann's avatar
      Merge tag 'tegra-for-5.13-dt-bindings' of... · ece61ed9
      Arnd Bergmann authored 
      Merge tag 'tegra-for-5.13-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v5.13-rc1

One single changes that adds the nvidia,pmc property to the XUSB pad
controller binding, which will subsequently be used to implement USB
sleepwalk functionality.

* tag 'tegra-for-5.13-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: phy: tegra-xusb: Add nvidia,pmc prop

Link: https://lore.kernel.org/r/20210401172622.3352990-1-thierry.reding@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      ece61ed9
    • Arnd Bergmann's avatar
      Merge tag 'stm32-dt-for-v5.13-1' of... · 24eab779
      Arnd Bergmann authored 
      Merge tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.13, round 1

Highlights:
----------

MCU part:

 -Add stm32h750 SoC support. It is based on stm32h743 and embeds
  crypto IPs and 2 ADC.
 -Add new art-pi board based on stm32h750. This board embeds:
  -8MB QSPI flash.
  -16MB SPI flash.
  -32MB SDRAM.
  -AP6212 combo (wifi/bt/fm).

MPU part:
 -Use dedicated PTP clock for Ethernet controller on stm32mp151.
 -Enable i2c analog filter on stm32mp151.

 -DH:
  -Update GPIO names.
  -Enable crc1 & crryp1 on DHSOM.

 -Engicam: add new boards support:
  -MicroGEA SOM which embeds STM32MP157aac, 512 MB Nand Flash
   I2S.
  -MicroGEA STM32MP1 Microdev 2.0 which embeds MicroGEA SOM,
   Ethernet up to 100 Mbps, USB typeA, microSD, UMTS LTE, Wifi/BT
   LVDS panel connector.
  -MicroGEA STM32MP1 MicroDev 2.0 7" which embeds a MicroGEA STM32MP1
   MicroDev 2.0 plus 7" Open Frame panel solution (7" AUO B101AW03 LVDS panel
   and EDT DT5526 Touch)
  -i.Core STM32MP1 EDIMM SoM based on STM32MP157A.
  -C.TOUCH 2.0 n EDIMM compliant general purpose Carrier board with capacitive
   touch interface support based on i.Core STM32MP1 EDIMM SoM.
   It embeds ETH 10/100, wifi/bt, CAN, USB TypeA/OTG, LVDS pannel connector.
  -EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
   Board based on i.Core STM32MP1 EDIMM SoM. IT embeds LCD 7" C.Touch,
   wifi/bt,2*LVDS FHD, 3*USB2, 1*USB3 ...

* tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits)
  ARM: dts: stm32: Add PTP clock to Ethernet controller
  ARM: dts: stm32: Enable crc1 and cryp1 where applicable on DHSOM
  ARM: dts: stm32: Update GPIO line names on PicoITX
  ARM: dts: stm32: Update GPIO line names on DRC02
  ARM: dts: stm32: Fill GPIO line names on AV96
  ARM: dts: stm32: Fill GPIO line names on DHCOM SoM
  dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties'
  ARM: stm32: Add a new SoC - STM32H750
  ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
  ARM: dts: stm32: fix i2c node typo in stm32h743
  ARM: dts: stm32: add new instances for stm32h743 MCU
  ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
  dt-bindings: arm: stm32: Add compatible strings for ART-PI board
  Documentation: arm: stm32: Add stm32h750 value line doc
  ARM: dts: stm32: enable the analog filter for all I2C nodes in stm32mp151
  ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
  dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
  ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
  ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM
  dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
  ...

Link: https://lore.kernel.org/r/48784f53-943b-0baf-d4a0-fcb7d3849b00@foss.st.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      24eab779
    • Arnd Bergmann's avatar
      Merge tag 'ux500-dts-v5.13' of... · 03a807f4
      Arnd Bergmann authored 
      Merge tag 'ux500-dts-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

Ux500 DTS changes for the v5.13 kernel cycle:

- Fix up the WLAN on Janice
- Fix the touchscreen on TVK R2
- Push down definitions to the UIBs instead of
  trying to share too much.
- Bump the AUX1 voltage on the AB8500 so the
  touchscreen will work.
- Define the CTTYSP touchscreen on the TVK R3.

* tag 'ux500-dts-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: ux500: Add Cypress CTTYSP touch to TVK UIB
  ARM: dts: ux500: Bump AUX1 voltage
  ARM: dts: ux500: Clarify UIB version per board
  ARM: dts: ux500: Totally separate TVK R2 and R3
  ARM: dts: ux500: Push TC35893 defines to each UIB
  ARM: dts: ux500: Fix up TVK R3 sensors
  ARM: dts: ux500: Push sensors to TVK R2 board
  ARM: dts: ux500: Move Synaptics to right include
  ARM: dts: ux500: Fix touchscreen on TVK R2
  ARM: dts: ux500: Fix BT+WLAN on Janice

Link: https://lore.kernel.org/r/CACRpkdanRQ6A85d=7vgpzbg-m3-yFcpQ4fuzrxZu3RJ0DrA2bQ@mail.gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      03a807f4
    • Arnd Bergmann's avatar
      Merge tag 'juno-updates-5.13' of... · 45f174d8
      Arnd Bergmann authored 
      Merge tag 'juno-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt

ARMv8 Juno updates for v5.13

Couple of changes to describe PCI dma-ranges correctly which was
previously removed and to enable the PCIe and DMA SMMU.

* tag 'juno-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: Enable more SMMUs
  arm64: dts: juno: Describe PCI dma-ranges

Link: https://lore.kernel.org/r/20210331100410.cenuhvpqoumvsk52@bogusSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      45f174d8
    • Arnd Bergmann's avatar
      Merge tag 'imx-dt64-5.13' of... · d2adc561
      Arnd Bergmann authored 
      Merge tag 'imx-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.13:

- A series from Dong Aisheng to update i.MX8Q device trees for adopting
  SS (SubSystems) based bindings.
- New board support:  Kontron pitx-imx8m, Engicam i.Core MX8M Mini.
- A series from Adrien Grassein to add various peripheral support for
  imx8mm-nitrogen-r2 board.
- A series from Guido Günther to update librem5-devkit device tree.
- A number of patches from Michael Walle to add Root Complex Event
  Collector interrupt, update MTD partitions and add rtc0 alias for
  ls1028a-kontron-sl28 board.
- Add EQOS MAC support for phyBOARD-Pollux-i.MX8MP.
- Add 2x2 SFP+ cage support for clearfog-itx boards.
- Small and random update for various boards.

* tag 'imx-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (55 commits)
  arm64: dts: fsl-ls1028a-kontron-sl28: add rtc0 alias
  arm64: dts: ls1028a: move rtc alias to individual boards
  arm64: dts: fsl-ls1028a-kontron-sl28: combine unused partitions
  arm64: dts: fsl-ls1028a-kontron-sl28: move MTD partitions
  arm64: dts: imx8mp-evk: Improve the Ethernet PHY description
  arm64: dts: imx8mq-librem5-r3: Mark buck3 as always on
  arm64: dts: imx8mq-librem5: Hog the correct gpio
  arm64: dts: lx2160a-clearfog-itx: add SFP support
  arm64: dts: imx8mp-phyboard-pollux-rdk: Change debug UART
  arm64: dts: imx8mn: Reorder flexspi clock-names entry
  arm64: dts: imx8mm: Reorder flexspi clock-names entry
  arm64: dts: ls1028a: set up the real link speed for ENETC port 2
  arm64: dts: imx8mm-nitrogen-r2: add ecspi2 support
  arm64: dts: imx: add imx8qm mek support
  arm64: dts: imx: add imx8qm common dts file
  arm64: dts: imx8qm: add dma ss support
  arm64: dts: imx8: split adma ss into dma and audio ss
  arm64: dts: imx8qm: add conn ss support
  arm64: dts: imx8qm: add lsio ss support
  arm64: dts: imx8: switch to new lpcg clock binding
  ...

Link: https://lore.kernel.org/r/20210331041019.31345-5-shawnguo@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      d2adc561
    • Arnd Bergmann's avatar
      Merge tag 'imx-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt · 4f662ba2
      Arnd Bergmann authored 
      i.MX device tree change for 5.13:

- New board support: i.MX7D based reMarkable2.
- Clean up imx6ql-pfla02 hog group by moving pins into corresponded
  client groups.
- Add Netronix embedded controller for imx50-kobo-aura.
- A series from Sebastian Reichel to improve GE Bx50v3 device trees.
- Support I2C bus recovery for imx6qdl-wandboard by adding SCL/SDA
  GPIOs.
- Remove unnecessary #address-cells/#size-cells from imx6qdl-gw boards.
- Various small and random device tree update.

* tag 'imx-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (21 commits)
  ARM: dts: imx6: pbab01: Set USB OTG port to peripheral
  ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing
  ARM: imx7d-remarkable2: Initial device tree for reMarkable2
  ARM: dts: imx7d-mba7: Remove unsupported PCI properties
  ARM: dts: imx6qdl-gw*: Remove unnecessary #address-cells/#size-cells
  ARM: dts: imx6dl-plybas: Fix gpio-keys W=1 warnings
  ARM: dts: imx: bx50v3: Define GPIO line names
  ARM: dts: imx: bx50v3: i2c GPIOs are open drain
  ARM: dts: imx6q-ba16: improve PHY information
  ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO
  ARM: dts: ls1021a: mark crypto engine dma coherent
  ARM: dts: colibri-imx6ull: Change drive strength for usdhc2
  ARM: dts: imx6ql-pfla02: Move "hog" pins into corresponded pin groups
  ARM: dts: imx6qdl-phytec-pbab01: Select synchronous mode for AUDMUX
  ARM: dts: imx6qdl-ts7970: Drop redundant "fsl,mode" option
  ARM: dts: imx53-qsb: Describe the esdhc1 card detect pin
  ARM: dts: ls1021a: Harmonize DWC USB3 DT nodes name
  ARM: dts: imx6qdl-wandboard: add scl/sda gpios definitions for i2c bus recovery
  ARM: dts: imx: Mark IIM as syscon on i.MX51/i.MX53
  ARM: dts: imx6sl-tolino-shine2hd: Add Netronix embedded controller
  ...

Link: https://lore.kernel.org/r/20210331041019.31345-4-shawnguo@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      4f662ba2
    • Arnd Bergmann's avatar
      Merge tag 'imx-bindgins-5.13' of... · 2771bc0d
      Arnd Bergmann authored 
      Merge tag 'imx-bindgins-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX bindings update for 5.13:

- Add vendor prefix for reMarkable.
- Add compatible for reMarkable 2 e-Ink tablet, Kontron pITX-imx8m
  board, Engicam i.Core MX8M Mini devices.
- Add compatbile 'fsl,imx8qm-mu' for i.MX mailbox bindings.
- One correction on example clock-names in imx8qxp-lpcg bindings.

* tag 'imx-bindgins-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: Add the reMarkable 2 e-Ink tablet
  dt-bindings: Add vendor prefix for reMarkable
  dt-bindings: mailbox: mu: add imx8qm support
  dt-bindings: arm: fsl: add imx8qm boards compatible string
  dt-bindings: arm: fsl: add Kontron pITX-imx8m board
  dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
  dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
  dt-bindings: clock: imx8qxp-lpcg: correct the example clock-names

Link: https://lore.kernel.org/r/20210331041019.31345-3-shawnguo@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      2771bc0d
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-5.13/devicetre-arm64' of https://github.com/Broadcom/stblinux into arm/dt · 3b73ea6c
      Arnd Bergmann authored 
      This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.13, please pull the following:

- Rafal continues to add support for the 4908 SoCs and describes the USB
  PHY, firmware flash partitions and Ethernet switch and Ethernet
  controller. He also adds support for the TP-Link Archer C2300 V1
  router and upates the Netgear R8000P and Asus GT-AC5300 routers network
  ports description.

* tag 'arm-soc/for-5.13/devicetre-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: bcm4908: add Ethernet MAC addr
  arm64: dts: broadcom: bcm4908: add Ethernet TX irq
  arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode
  arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
  dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
  arm64: dts: broadcom: bcm4908: fix switch parent node name
  arm64: dts: broadcom: bcm4908: describe firmware partitions
  arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs
  arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
  arm64: dts: broadcom: bcm4908: describe Ethernet controller
  arm64: dts: broadcom: bcm4908: describe USB PHY

Link: https://lore.kernel.org/r/20210330184006.1451315-2-f.fainelli@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      3b73ea6c
    • Arnd Bergmann's avatar
      Merge tag 'arm-soc/for-5.13/devicetree' of https://github.com/Broadcom/stblinux into arm/dt · 498adc86
      Arnd Bergmann authored 
      This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.13, please pull the following:

- Rafal fixes YAML warnings for the memory nodes of BCM5301X nodes and
  adds support for the NVMEM NVRAM node on Linksys and Luxul WLAN
  routers. He also fixes up the partitions for the Linksys EA9400 to
  use the newly introduced parser compatible and sets the power LED to
  its default state.

* tag 'arm-soc/for-5.13/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: BCM5301X: Set Linksys EA9500 power LED
  ARM: dts: BCM5301X: Fix Linksys EA9500 partitions
  ARM: dts: BCM5301X: Describe NVMEM NVRAM on Linksys & Luxul routers
  ARM: dts: BCM5301X: fix "reg" formatting in /memory node

Link: https://lore.kernel.org/r/20210330184006.1451315-1-f.fainelli@gmail.comSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      498adc86
    • Arnd Bergmann's avatar
      Merge tag 'socfpga_dts_update_for_v5.13' of... · 61de0971
      Arnd Bergmann authored 
      Merge tag 'socfpga_dts_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.13
- Patches from Krzysztof Kozlowski that fixes dtc warnings
  and dtbs_check warnings
- Adjust the "cnds,read-delay" value for the Agilex devkit to 2

* tag 'socfpga_dts_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: intel: adjust qpsi read-delay property
  arm64: dts: intel: socfpga_agilex_socdk_nand: align LED node names with dtschema
  arm64: dts: intel: socfpga_agilex: align node names with dtschema
  arm64: dts: intel: socfpga_agilex: use defined for GIC interrupts
  arm64: dts: intel: socfpga_agilex: move usbphy out of soc node
  arm64: dts: intel: socfpga_agilex: remove default status=okay
  arm64: dts: intel: socfpga_agilex: move timer out of soc node
  arm64: dts: intel: socfpga_agilex: move clocks out of soc node
  arm64: dts: intel: socfpga: override clocks by label

Link: https://lore.kernel.org/r/20210330110430.558182-2-dinguyen@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      61de0971
    • Arnd Bergmann's avatar
      Merge tag 'omap-for-v5.13/dts-genpd-signed' of... · e49936d2
      Arnd Bergmann authored 
      Merge tag 'omap-for-v5.13/dts-genpd-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omaps for genpd support for v5.13

In order to move omap4/5 and dra7 to probe with devicetree data and genpd,
we need to add the missing interconnect target module configuration for
the drivers that do not still have it. This is similar to what we have
already done earlier for am3 and 4 earlier.

These patches are very much similar for all the three SoCs here. The dra7
changes were already available for v5.12 merge window, but were considered
too late to add for v5.12. The patches for omap4 and 5 follow the same
pattern, except for PCIe that is available only on dra7.

We do the changes one driver at a time, and still keep the legacy property
for "ti,hwmods" mostly around, except for cases when already not needed.
We will be dropping the custom property and related legacy data in a
follow-up series.

* tag 'omap-for-v5.13/dts-genpd-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (53 commits)
  ARM: dts: Configure simple-pm-bus for omap5 l3
  ARM: dts: Configure simple-pm-bus for omap5 l4_cfg
  ARM: dts: Configure simple-pm-bus for omap5 l4_per
  ARM: dts: Configure simple-pm-bus for omap5 l4_wkup
  ARM: dts: Move omap5 l3-noc to a separate node
  ARM: dts: Move omap5 mmio-sram out of l3 interconnect
  ARM: dts: Configure interconnect target module for omap5 sata
  ARM: dts: Configure interconnect target module for omap5 gpmc
  ARM: dts: Configure interconnect target module for omap5 mpu
  ARM: dts: Configure interconnect target module for omap5 emif
  ARM: dts: Configure interconnect target module for omap5 dmm
  ARM: dts: Prepare for simple-pm-bus for omap4 l3
  ARM: dts: Configure simple-pm-bus for omap4 l4_cfg
  ARM: dts: Configure simple-pm-bus for omap4 l4_per
  ARM: dts: Configure simple-pm-bus for omap4 l4_wkup
  ARM: dts: Move omap4 l3-noc to a separate node
  ARM: dts: Move omap4 mmio-sram out of l3 interconnect
  ARM: dts: Configure interconnect target module for omap4 mpu
  ARM: dts: Configure interconnect target module for omap4 debugss
  ARM: dts: Configure interconnect target module for omap4 emif
  ...

Link: https://lore.kernel.org/r/pull-1617004205-537424@atomide.com-2Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      e49936d2
    • Pratyush Yadav's avatar
      arm64: dts: ti: k3-am64-main: Fix ospi compatible · 112e5934
      Pratyush Yadav authored 
      The TI specific compatible should be followed by the generic
"cdns,qspi-nor" compatible.
Signed-off-by: default avatarPratyush Yadav <p.yadav@ti.com>
Reviewed-by: default avatarVignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: default avatarNishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210326130034.15231-4-p.yadav@ti.com
      112e5934
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7