- 04 Jun, 2013 40 commits
-
-
Laurent Pinchart authored
All r8a7740 platforms now use the pinctrl API to control the FSI pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Laurent Pinchart authored
All r8a7740 platforms now use the pinctrl API to control the CEU pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by:
-
Laurent Pinchart authored
All r8a7740 platforms now use the pinctrl API to control the GETHER pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by:
-
Laurent Pinchart authored
All r8a7740 platforms now use the pinctrl API to control the BSC pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by:
-
Laurent Pinchart authored
All r8a7740 platforms now use the pinctrl API to control the INTC pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by:
-
Laurent Pinchart authored
All r8a7740 platforms now use the pinctrl API to control the SCIF pins, the corresponding function GPIOS are unused. Remove them. Signed-off-by:
-
Laurent Pinchart authored
LCDC routing is configured automatically in the PFC driver, don't configure it manually in board code. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based BSC pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based INTC pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based SCIF pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
The core devices array is empty, passing it to platform_add_devices() is a no-op. Remove it. Signed-off-by:
-
Laurent Pinchart authored
The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by:
-
Laurent Pinchart authored
LCDC routing is configured automatically in the PFC driver, don't configure it manually in board code. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based HDMI pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based CEU0 pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based GETHER pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based INTC pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
The r8a7740 has two LCDC units and two sets of LCDC output signals. By default LCDC0 is routed to the LCD0 signals, and LCDC1 to the LCD1 signals. However, LCDC1 can be routed to the LCD0 signals by setting bit MSEL6 in MSEL3CR (the LCD0 signals are further pinmuxed the usual way). This could be configured by duplicating the LCD0 pin groups for LCDC1. However, this would unnecessarily complicate the LCD pin groups, as no r8a7740 board supported in mainline use such a configuration. Hardcode the MSEL3CR MSEL6 bit to 0 for now. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
When adding the INTC pin groups the INTC function hasn't been added to the functions list. Fix it. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Function GPIOs are not used anymore, and all code use the GPIO numbers directly. Remove the GPIOs enumeration. Signed-off-by:
-
Laurent Pinchart authored
No sh7372 platform use the function GPIOs API. Remove it. Signed-off-by:
-
Laurent Pinchart authored
The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based USBHS pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based TSC2007 pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
The pen state is retrieved by reading the state of a pin used as an IRQ. There's no need to reconfigure the pin as a pure GPIO, as the IRQ pin state can be read. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based SMSC911x pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based SCIF pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based LCD pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based KEYSC pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based HDMI pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping. Signed-off-by:
-
Laurent Pinchart authored
Replace the GPIO-based CEU pinmux configuration by a pinctrl mapping. Signed-off-by:
-
