Add mXT224S touchscreen
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://lore.kernel.org/r/20240131-expressatt_mxt224s_touchscreen-v2-2-4463ae0414b5@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Copy gsbi3 node from qcom-apq8064.dtsi and set appropriate properties
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://lore.kernel.org/r/20240131-expressatt_mxt224s_touchscreen-v2-1-4463ae0414b5@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add CPU and SAW/ACC nodes to enable SMP on MSM8226.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
[luca: update some nodes to fix dtbs_check errors, reorder, cleanup]
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240210-msm8226-cpu-v2-3-5d9cb4c35204@z3ntu.xyzSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Quite a few nodes haven't been sorted correctly by reg, so let's do this
now so that future nodes can be added at the correct place.

Also at the same time, move the status property last.

No functional change intended.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
[luca: add more text to commit message]
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240210-msm8226-cpu-v2-2-5d9cb4c35204@z3ntu.xyzSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The qfprom actually is bigger than 0x1000, so adjust the reg.

Note that the non-ECC-corrected qfprom can be found at 0xfc4b8000
(-0x4000). The current reg points to the ECC-corrected qfprom block
which should have equivalent values at all offsets compared to the
non-corrected version.

[luca@z3ntu.xyz: extract to standalone patch and adjust for review
comments]

Fixes: c59ffb51 ("arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes")
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240210-msm8974-qfprom-v3-1-26c424160334@z3ntu.xyzSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Three remaining Qualcomm platforms have special handling of the
TEXT_OFFSET to reserve the memory at the beginnig of the system RAM, see
the commit 9e775ad1 ("ARM: 7012/1: Set proper TEXT_OFFSET for newer
MSMs"). This is required for older platforms like IPQ40xx, MSM8x60,
MSM8960 and APQ8064 and is compatible with other 32-bit Qualcomm
platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231216162700.863456-4-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Historically we had several subtypes of 32-bit Qualcomm platforms.
Nowadays they became just useless symbols in Kconfig. Drop them and pull
corresponding clocksource entries towards top-level ARCH_QCOM entry.

Note, I've left ARCH_IPQ40XX, ARCH_MSM8x60 and ARCH_MSM8960 in place,
since they have special TEXT_OFFSET handling, which can be sorted out
separately.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231216162700.863456-3-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

In preparation of dropping most of ARCH_QCOM subtypes, stop limiting the
driver just to those machines. Allow it to be built for any 32-bit
Qualcomm platform (ARCH_QCOM).
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231216162700.863456-2-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

This device has a vibrator attached to the CAMSS_GP0_CLK, use clk-pwm
and pwm-vibrator to make the vibrator work.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240121-lenok-vibrator-v1-1-d4703ff92021@z3ntu.xyzSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Adds volume up, volume down, and home keys to expressatt
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://lore.kernel.org/r/20240120-expressatt-gpio-keys-v1-1-4da7e37440b1@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The driver reads only one clock frequency, and the schema does not
allow more than one frequency here.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230812183811.375671-1-david@ixit.czSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Rename the SPI-NOR node to flash@0, remove #address-cells and #size-cells
as they should be under the partitions subnode and use the generic
jedec,spi-nor compatible.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811210142.403160-2-robimarko@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

All of the nodes under soc already have existing labels so use those
instead.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811210142.403160-1-robimarko@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the rmtfs-mem node which was part of one of the "unknown" memory
reservation. Split that one, make sure the reserved-memory in total
still covers the same space.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240121-memul-rmtfs-v1-1-e9da29b1f856@z3ntu.xyzSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Replace hard-coded interrupt parts (GIC, flags) with standard defines
for readability.  No changes in resulting DTBs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231205153317.346109-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add touch keys which are handled in touchscreen driver.
Use KEY_APPSELECT for the left button because other devices use that
even though downstream kernel uses KEY_RECENT.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231204094649.10094-1-matti.lehtimaki@gmail.com
[bjorn: Wrapped each cell in <>, as requested by Luca]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Align the order of clocks in Qualcomm DWC3 USB controller to match
bindings.  Linux driver does not care about the order.  This fixes
dtbs_check warning:

  qcom-ipq4018-ap120c-ac.dtb: usb@60f8800: clock-names:0: 'core' was expected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231112080136.12518-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Align the order of clocks in Qualcomm DWC3 USB controller to match
bindings.  Linux driver does not care about the order.  This fixes
dtbs_check warning:

  qcom-sdx65-mtp.dtb: usb@a6f8800: clock-names:3: 'sleep' was expected
  qcom-sdx65-mtp.dtb: usb@a6f8800: clock-names:4: 'mock_utmi' was expected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231112080136.12518-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The Qualcomm DWC3 USB controller bindings do not allow "reset-names" and
Linux driver does no use it.  This fixes dtbs_check warning:

  qcom-ipq8064-ap148.dtb: usb@100f8800: 'reset-names' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231112080136.12518-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs_format.h has gotten too big; let's do some organizing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>