Pull tracing updates from Steven Rostedt:

 - Remove unused ftrace_direct_funcs variables

 - Fix a possible NULL pointer dereference race in eventfs

 - Update do_div() usage in trace event benchmark test

 - Speedup direct function registration with asynchronous RCU callback.

   The synchronization was done in the registration code and this caused
   delays when registering direct callbacks. Move the freeing to a
   call_rcu() that will prevent delaying of the registering.

 - Replace simple_strtoul() usage with kstrtoul()

* tag 'trace-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Fix a possible null pointer dereference in eventfs_find_events()
  ftrace: Fix possible use-after-free issue in ftrace_location()
  ftrace: Remove unused global 'ftrace_direct_func_count'
  ftrace: Remove unused list 'ftrace_direct_funcs'
  tracing: Improve benchmark test performance by using do_div()
  ftrace: Use asynchronous grace period for register_ftrace_direct()
  ftrace: Replaces simple_strtoul in ftrace

Pull probes updates from Masami Hiramatsu:

 - tracing/probes: Add new pseudo-types %pd and %pD support for dumping
   dentry name from 'struct dentry *' and file name from 'struct file *'

 - uprobes performance optimizations:
    - Speed up the BPF uprobe event by delaying the fetching of the
      uprobe event arguments that are not used in BPF
    - Avoid locking by speculatively checking whether uprobe event is
      valid
    - Reduce lock contention by using read/write_lock instead of
      spinlock for uprobe list operation. This improved BPF uprobe
      benchmark result 43% on average

 - rethook: Remove non-fatal warning messages when tracing stack from
   BPF and skip rcu_is_watching() validation in rethook if possible

 - objpool: Optimize objpool (which is used by kretprobes and fprobe as
   rethook backend storage) by inlining functions and avoid caching
   nr_cpu_ids because it is a const value

 - fprobe: Add entry/exit callbacks types (code cleanup)

 - kprobes: Check ftrace was killed in kprobes if it uses ftrace

* tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobe/ftrace: bail out if ftrace was killed
  selftests/ftrace: Fix required features for VFS type test case
  objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids
  objpool: enable inlining objpool_push() and objpool_pop() operations
  rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get()
  ftrace: make extra rcu_is_watching() validation check optional
  uprobes: reduce contention on uprobes_tree access
  rethook: Remove warning messages printed for finding return address of a frame.
  fprobe: Add entry/exit callbacks types
  selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"
  selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"
  Documentation: tracing: add new type '%pd' and '%pD' for kprobe
  tracing/probes: support '%pD' type for print struct file's name
  tracing/probes: support '%pd' type for print struct dentry's name
  uprobes: add speculative lockless system-wide uprobe filter check
  uprobes: prepare uprobe args buffer lazily
  uprobes: encapsulate preparation of uprobe args buffer

Pull bootconfig updates from Masami Hiramatsu:

 - Do not put unneeded quotes on the extra command line items which was
   inserted from the bootconfig.

 - Remove redundant spaces from the extra command line.

* tag 'bootconfig-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  init/main.c: Minor cleanup for the setup_command_line() function
  init/main.c: Remove redundant space from saved_command_line
  bootconfig: do not put quotes on cmdline items unless necessary

Pull sysctl updates from Joel Granados:

 - Remove sentinel elements from ctl_table structs in kernel/*

   Removing sentinels in ctl_table arrays reduces the build time size
   and runtime memory consumed by ~64 bytes per array. Removals for
   net/, io_uring/, mm/, ipc/ and security/ are set to go into mainline
   through their respective subsystems making the next release the most
   likely place where the final series that removes the check for
   proc_name == NULL will land.

   This adds to removals already in arch/, drivers/ and fs/.

 - Adjust ctl_table definitions and references to allow constification
     - Remove unused ctl_table function arguments
     - Move non-const elements from ctl_table to ctl_table_header
     - Make ctl_table pointers const in ctl_table_root structure

   Making the static ctl_table structs const will increase safety by
   keeping the pointers to proc_handler functions in .rodata. Though no
   ctl_tables where made const in this PR, the ground work for making
   that possible has started with these changes sent by Thomas
   Weißschuh.

* tag 'sysctl-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
  sysctl: drop now unnecessary out-of-bounds check
  sysctl: move sysctl type to ctl_table_header
  sysctl: drop sysctl_is_perm_empty_ctl_table
  sysctl: treewide: constify argument ctl_table_root::permissions(table)
  sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)
  bpf: Remove the now superfluous sentinel elements from ctl_table array
  delayacct: Remove the now superfluous sentinel elements from ctl_table array
  kprobes: Remove the now superfluous sentinel elements from ctl_table array
  printk: Remove the now superfluous sentinel elements from ctl_table array
  scheduler: Remove the now superfluous sentinel elements from ctl_table array
  seccomp: Remove the now superfluous sentinel elements from ctl_table array
  timekeeping: Remove the now superfluous sentinel elements from ctl_table array
  ftrace: Remove the now superfluous sentinel elements from ctl_table array
  umh: Remove the now superfluous sentinel elements from ctl_table array
  kernel misc: Remove the now superfluous sentinel elements from ctl_table array

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings
     to schemas

   - Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0
     irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3
     linflexuart, and Mediatek MT7988 XHCI

   - Add 'reg' constraints on DSI and SPI display panels

   - More dropping of unnecessary quotes in schemas

   - Use full paths rather than relative paths in schema $refs

   - Drop redundant storing of phandle for reserved memory

  DT Core:

   - Use scope based cleanups for kfree() and of_node_put()

   - Track interrupt-map and power-supplies for fw_devlink

   - Add buffer overflow check in of_modalias()

   - Add and use __of_prop_free() helper for freeing struct property"

* tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
  of: property: Add fw_devlink support for interrupt-map property
  dt-bindings: display: panel: constrain 'reg' in DSI panels
  dt-bindings: display: panel: constrain 'reg' in SPI panels
  dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
  dt-bindings: Use full path to other schemas
  dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema
  of: module: add buffer overflow check in of_modalias()
  dt-bindings: PCI: microchip: increase number of items in ranges property
  dt-bindings: Drop unnecessary quotes on keys
  dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
  of: property: Use scope based cleanup on port_node
  of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
  of: property: fw_devlink: Add support for "power-supplies" binding
  dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
  dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller
  dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support
  dt-bindings: timer: renesas,tmu: Add R-Car V4M support
  dt-bindings: timer: renesas,cmt: Add R-Car V4M support
  of: Use scope based of_node_put() cleanups
  of: Use scope based kfree() cleanups
  ...

Pull parisc updates from Helge Deller:

 -  define sigset_t in parisc uapi header to fix build of util-linux

 -  define HAVE_ARCH_HUGETLB_UNMAPPED_AREA to avoid compiler warning

 -  drop unused 'exc_reg' struct in math-emu code

* tag 'parisc-for-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
  parisc/math-emu: Remove unused struct 'exc_reg'
  parisc: Define sigset_t in parisc uapi header

Pull powerpc updates from Michael Ellerman:

 - Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.

 - Allow per-process DEXCR (Dynamic Execution Control Register) settings
   via prctl, notably NPHIE which controls hashst/hashchk for ROP
   protection.

 - Install powerpc selftests in sub-directories. Note this changes the
   way run_kselftest.sh needs to be invoked for powerpc selftests.

 - Change fadump (Firmware Assisted Dump) to better handle memory
   add/remove.

 - Add support for passing additional parameters to the fadump kernel.

 - Add support for updating the kdump image on CPU/memory add/remove
   events.

 - Other small features, cleanups and fixes.

Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.

* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
  powerpc/fadump: Fix section mismatch warning
  powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
  powerpc/fadump: update documentation about bootargs_append
  powerpc/fadump: pass additional parameters when fadump is active
  powerpc/fadump: setup additional parameters for dump capture kernel
  powerpc/pseries/fadump: add support for multiple boot memory regions
  selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
  KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
  KVM: PPC: Fix documentation for ppc mmu caps
  KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
  KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
  powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
  powerpc/code-patching: Use dedicated memory routines for patching
  powerpc/code-patching: Test patch_instructions() during boot
  powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
  powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
  powerpc: Fix typos
  powerpc/eeh: Fix spelling of the word "auxillary" and update comment
  macintosh/ams: Fix unused variable warning
  powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
  ...

Pull ARM updates from Russell King:

 - Updates to AMBA bus subsystem to drop .owner struct device_driver
   initialisations, moving that to code instead.

 - Add LPAE privileged-access-never support

 - Add support for Clang CFI

 - clkdev: report over-sized device or connection strings

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: (36 commits)
  ARM: 9398/1: Fix userspace enter on LPAE with CC_OPTIMIZE_FOR_SIZE=y
  clkdev: report over-sized strings when creating clkdev entries
  ARM: 9393/1: mm: Use conditionals for CFI branches
  ARM: 9392/2: Support CLANG CFI
  ARM: 9391/2: hw_breakpoint: Handle CFI breakpoints
  ARM: 9390/2: lib: Annotate loop delay instructions for CFI
  ARM: 9389/2: mm: Define prototypes for all per-processor calls
  ARM: 9388/2: mm: Type-annotate all per-processor assembly routines
  ARM: 9387/2: mm: Rewrite cacheflush vtables in CFI safe C
  ARM: 9386/2: mm: Use symbol alias for cache functions
  ARM: 9385/2: mm: Type-annotate all cache assembly routines
  ARM: 9384/2: mm: Make tlbflush routines CFI safe
  ARM: 9382/1: ftrace: Define ftrace_stub_graph
  ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement
  ARM: 9357/2: Reduce the number of #ifdef CONFIG_CPU_SW_DOMAIN_PAN
  ARM: 9356/2: Move asm statements accessing TTBCR into C functions
  ARM: 9355/2: Add TTBCR_* definitions to pgtable-3level-hwdef.h
  ARM: 9379/1: coresight: tpda: drop owner assignment
  ARM: 9378/1: coresight: etm4x: drop owner assignment
  ARM: 9377/1: hwrng: nomadik: drop owner assignment
  ...

Merge tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:

 - New drivers/platform/arm64 directory for arm64 embedded-controller
   drivers

 - New drivers:
    - Acer Aspire 1 embedded controllers (for arm64 models)
    - ACPI quickstart PNP0C32 buttons
    - Dell All-In-One backlight support (dell-uart-backlight)
    - Lenovo WMI camera buttons
    - Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
    - MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
    - MSI WMI sensors (fan speed sensors only for now)

 - Asus WMI:
    - 2024 ROG Mini-LED support
    - MCU powersave support
    - Vivobook GPU MUX support
    - Misc. other improvements

 - Ideapad laptop:
    - Export FnLock LED as LED class device
    - Switch platform profiles using thermal management key

 - Intel drivers:
    - IFS: various improvements
    - PMC: Lunar Lake support
    - SDSI: various improvements
    - TPMI/ISST: various improvements
    - tools: intel-speed-select: various improvements

 - MS Surface drivers:
    - Fan profile switching support
    - Surface Pro thermal sensors support

 - ThinkPad ACPI:
    - Reworked hotkey support to use sparse keymaps
    - Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys

 - WMI core:
    - New WMI driver development guide

 - x86 Android tablets:
    - Lenovo Yoga Tablet 2 Pro 1380F/L support
    - Xiaomi MiPad 2 status LED and bezel touch buttons backlight
      support

 - Miscellaneous cleanups / fixes / improvements

* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
  platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
  devm-helpers: Fix a misspelled cancellation in the comments
  tools arch x86: Add dell-uart-backlight-emulator
  platform/x86: Add new Dell UART backlight driver
  platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
  platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
  platform/x86: x86-android-tablets: Pass struct device to init()
  platform/x86/amd: pmc: Add new ACPI ID AMDI000B
  platform/x86/amd: pmf: Add new ACPI ID AMDI0105
  platform/x86: p2sb: Don't init until unassigned resources have been assigned
  platform/surface: aggregator: Log critical errors during SAM probing
  platform/x86: ISST: Support SST-BF and SST-TF per level
  platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
  tools/power/x86/intel-speed-select: v1.19 release
  tools/power/x86/intel-speed-select: Display CPU as None for -1
  tools/power/x86/intel-speed-select: SST BF/TF support per level
  tools/power/x86/intel-speed-select: Increase number of CPUs displayed
  tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
  tools/power/x86/intel-speed-select: Fix display for unsupported levels
  tools/power/x86/intel-speed-select: Support multiple dies
  ...

Pull MTD updates from Miquel Raynal:
 "MTD:

   - Simon Glass wanted to support binman's output properties in order
     to check their validity using the binding checks and proposed
     changes with the missing properties as well as a binman compatible.

   - Krzysztof Kozlowski on his side shared a new yaml for describing
     Samsung's OneNAND interface.

   - The interface with NVMEM has also been slightly improved/fixed,
     especially now that OTP are also supported in the NAND subsystem.

   - Along with these changes, small cleanups have also been contributed
     around ID tables, structure sizes, arithmetic checks and comments.

  Raw NAND subsystem:

   - Two small fixes, one in the Hynix vendor code for properly
     returning an error which might have been ignored and another in the
     Davinci driver to properly synchronize the controller with the gpio
     domain.

  SPI NOR subsystem:

   - SPI NOR now uses div_u64() instead of div64_u64() in places where
     the divisor is 32 bits. Many 32 bit architectures can optimize this
     variant better than a full 64 bit divide"

* tag 'mtd/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: spi-nor: replace unnecessary div64_u64() with div_u64()
  mtd: mchp23k256: drop unneeded MODULE_ALIAS
  dt-bindings: mtd: fixed-partition: Add binman compatibles
  dt-bindings: mtd: fixed-partitions: Add alignment properties
  mtd: maps: sa1100-flash: Prefer struct_size over open coded arithmetic
  mtd: core: Align comment with an action in mtd_otp_nvmem_add()
  mtd: rawnand: hynix: fixed typo
  mtd: rawnand: davinci: Add dummy read after sending command
  mtd: partitions: redboot: Added conversion of operands to a larger type
  dt-bindings: mtd: Add Samsung S5Pv210 OneNAND
  mtd: core: Don't fail mtd_otp_nvmem_add() if OTP is unsupported
  mtd: core: Report error if first mtd_otp_size() call fails in mtd_otp_nvmem_add()

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Increase the timeout period of the ACMD41 command
   - Add card entry for quirks to debugfs
   - Add mmc_gpiod_set_cd_config() function
   - Store owner from SDIO modules with sdio_register_driver()

  MMC host:
   - atmel-mci: Some cleanups and a switch to use dev_err_probe()
   - renesas_sdhi:
      - Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
      - Set the SDBUF after reset
   - sdhci: Add support for "Tuning Error" interrupts
   - sdhci-acpi:
      - Add quirk to enable pull-up on the card-detect GPIO on Asus
        T100TA
      - Disable write protect detection on Toshiba WT10-A
      - Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
   - sdhci_am654:
      - Re-work and fix the tuning support for multiple speed-modes
      - Add tuning algorithm for delay chain
   - sdhci-esdhc-imx: Add NXP S32G3 support
   - sdhci-of-dwcmshc:
      - Add tuning support for Sophgo CV1800B and SG200X
      - Implement SDHCI CQE support
   - sdhci-pci-gli: Use the proper pci_set_power_state() instead of
     PMCSR writes"

  MEMSTICK:
   - Convert a couple of drivers to use the ->remove_new() callback"

* tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
  dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
  dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
  mmc: renesas_sdhi: Set the SDBUF after reset
  mmc: core: Increase the timeout period of the ACMD41 command
  mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too
  mmc: atmel-mci: Switch to use dev_err_probe()
  mmc: atmel-mci: Incapsulate used to be a platform data into host structure
  mmc: atmel-mci: Replace platform device pointer by generic one
  mmc: atmel-mci: Use temporary variable for struct device
  mmc: atmel-mci: Get rid of platform data leftovers
  mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
  mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning
  mmc: sdhci-s3c: Choose sdhci_ops based on variant
  mmc: sdhci_am654: Constify struct sdhci_ops
  mmc: sdhci-sprd: Constify struct sdhci_ops
  mmc: sdhci-omap: Constify struct sdhci_ops
  mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops
  mmc: slot-gpio: Use irq_handler_t type
  mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
  ...

Pull pmdomain updates from Ulf Hansson:
 "pmdomain core:
   - Don't clear suspended_count at genpd_prepare()
   - Update the rejected/usage counters at system suspend too

  pmdomain providers:
   - ti-sci: Fix duplicate PD referrals
   - mediatek: Add MT8188 buck isolation setting
   - renesas: Add R-Car M3-W power-off delay quirk
   - renesas: Split R-Car M3-W and M3-W+ sub-drivers

  cpuidle-psci:
   - Update MAINTAINERS to set a git for DT IDLE PM DOMAIN/ARM PSCI PM
     DOMAIN
   - Update init level to core_initcall()
   - Drop superfluous wrappers psci_dt_attach|detach_cpu()"

* tag 'pmdomain-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: ti-sci: Fix duplicate PD referrals
  pmdomain: core: Don't clear suspended_count at genpd_prepare()
  pmdomain: core: Update the rejected/usage counters at system suspend too
  pmdomain: renesas: rcar-sysc: Add R-Car M3-W power-off delay quirk
  pmdomain: renesas: rcar-sysc: Remove rcar_sysc_nullify() helper
  pmdomain: renesas: rcar-sysc: Split R-Car M3-W and M3-W+ sub-drivers
  pmdomain: renesas: rcar-sysc: Absorb rcar_sysc_ch into rcar_sysc_pd
  MAINTAINERS: Add a git for the DT IDLE PM DOMAIN
  MAINTAINERS: Add a git for the ARM PSCI PM DOMAIN
  cpuidle: psci: Update init level to core_initcall()
  cpuidle: psci: Drop superfluous wrappers psci_dt_attach|detach_cpu()
  pmdomain: mediatek: Add MT8188 buck isolation setting
  pmdomain: mediatek: scpsys: drop driver owner assignment

Pull media updates from Mauro Carvalho Chehab:

 - New V4L2 ioctl VIDIOC_REMOVE_BUFS

 - experimental support for using generic metaformats on V4L2 core

 - New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x

 - More cleanups at atomisp driver

 - Usual bunch of driver cleanups, improvements and fixes

* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
  media: bcm2835-unicam: Depend on COMMON_CLK
  Revert "media: v4l2-ctrls: show all owned controls in log_status"
  media: ov2740: Ensure proper reset sequence on probe()
  media: intel/ipu6: Don't print user-triggerable errors to kernel log
  media: bcm2835-unicam: Fix driver path in MAINTAINERS
  media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
  media: bcm2835-unicam: Do not print error when irq not found
  media: bcm2835-unicam: Do not replace IRQ retcode during probe
  media: bcm2835-unicam: Convert to platform remove callback returning void
  media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
  media: intel/ipu6: explicitly include vmalloc.h
  media: cec.h: Fix kerneldoc
  media: uvcvideo: Refactor iterators
  media: v4l: async: refactor v4l2_async_create_ancillary_links
  media: intel/ipu6: Don't re-allocate memory for firmware
  media: dvb-frontends: tda10048: Fix integer overflow
  media: tc358746: Use the correct div_ function
  media: i2c: st-mipid02: Use the correct div function
  media: tegra-vde: Refactor timeout handling
  media: stk1160: Use min macro
  ...

Pull drm fix from Dave Airlie:

 - fix breakage in buddy allocator

* tag 'drm-next-2024-05-16' of https://gitlab.freedesktop.org/drm/kernel:
  drm/tests: Add a unit test for range bias allocation
  drm/buddy: Fix the range bias clear memory allocation issue

With some compilers/configs fadump_setup_param_area() isn't inlined into
its caller (which is __init), leading to a section mismatch warning:

  WARNING: modpost: vmlinux: section mismatch in reference:
  fadump_setup_param_area+0x200 (section: .text.fadump_setup_param_area)
  -> memblock_phys_alloc_range (section: .init.text)

Fix it by adding an __init annotation.

Fixes: 683eab94 ("powerpc/fadump: setup additional parameters for dump capture kernel")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240515163708.3380c4d1@canb.auug.org.au/Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202405140922.oucLOx4Y-lkp@intel.com/Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240516132631.347956-1-mpe@ellerman.id.au

Raw NAND:

Two small fixes, one in the Hynix vendor code for properly returning an
error which might have been ignored and another in the Davinci driver to
properly synchronize the controller with the gpio domain.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

SPI NOR now uses div_u64() instead of div64_u64() in places where the
divisor is 32 bits. Many 32 bit architectures can optimize this variant
better than a full 64 bit divide.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Allocate cleared blocks in the bias range when the DRM
buddy's clear avail is zero. This will validate the bias
range allocation in scenarios like system boot when no
cleared blocks are available and exercise the fallback
path too. The resulting blocks should always be dirty.

v1:(Matthew)
  - move the size to the variable declaration section.
  - move the mm.clear_avail init to allocator init.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-2-Arunpravin.PaneerSelvam@amd.com

Problem statement: During the system boot time, an application request
for the bulk volume of cleared range bias memory when the clear_avail
is zero, we dont fallback into normal allocation method as we had an
unnecessary clear_avail check which prevents the fallback method leads
to fb allocation failure following system goes into unresponsive state.

Solution: Remove the unnecessary clear_avail check in the range bias
allocation function.

v2: add a kunit for this corner case (Daniel Vetter)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Fixes: 96950929 ("drm/buddy: Implement tracking clear page feature")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-1-Arunpravin.PaneerSelvam@amd.com

Pull workqueue updates from Tejun Heo:

 - Work items can now be disabled and enabled, and cancel_work_sync()
   and disable_work() can be called form atomic contexts for BH work
   items.

   This closes feature gap with tasklet and should allow converting all
   existing tasklet users to BH workqueues.

 - Improve pool sharing for unbound workqueues with strict affinity.

 - Misc changes including doc updates, improved debug annotations and
   cleanups.

* tag 'wq-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Use "@..." in function comment to describe variable length argument
  workqueue: Add destroy_work_on_stack() in workqueue_softirq_dead()
  workqueue: remove unnecessary import and function in wq_monitor.py
  workqueue: Introduce enable_and_queue_work() convenience function
  workqueue: add function in event of workqueue_activate_work
  workqueue: Cleanup subsys attribute registration
  workqueue: Use list_last_entry() to get the last idle worker
  workqueue: Move attrs->cpumask out of worker_pool's properties when attrs->affn_strict
  workqueue: Use INIT_WORK_ONSTACK in workqueue_softirq_dead()
  workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items
  workqueue: Remember whether a work item was on a BH workqueue
  workqueue: Remove WORK_OFFQ_CANCELING
  workqueue: Implement disable/enable for (delayed) work items
  workqueue: Preserve OFFQ bits in cancel[_sync] paths

Pull cgroup updates from Tejun Heo:

 - The locking around cpuset hotplug processing has always been a bit of
   mess which was worked around by making hotplug processing
   asynchronous. The asynchronity isn't great and led to other issues.

   We tried to make the behavior synchronous a while ago but that led to
   lockdep splats. Waiman took another stab at cleaning up and making it
   synchronous. The patch has been in -next for well over a month and
   there haven't been any complaints, so fingers crossed.

 - Tracepoints added to help understanding rstat lock contentions.

 - A bunch of minor changes - doc updates, code cleanups and selftests.

* tag 'cgroup-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
  cgroup/rstat: add cgroup_rstat_cpu_lock helpers and tracepoints
  selftests/cgroup: Drop define _GNU_SOURCE
  docs: cgroup-v1: Update page cache removal functions
  selftests/cgroup: fix uninitialized variables in test_zswap.c
  selftests/cgroup: cpu_hogger init: use {} instead of {NULL}
  selftests/cgroup: fix clang warnings: uninitialized fd variable
  selftests/cgroup: fix clang build failures for abs() calls
  cgroup/cpuset: Remove outdated comment in sched_partition_write()
  cgroup/cpuset: Fix incorrect top_cpuset flags
  cgroup/cpuset: Avoid clearing CS_SCHED_LOAD_BALANCE twice
  cgroup/cpuset: Statically initialize more members of top_cpuset
  cgroup: Avoid unnecessary looping in cgroup_no_v1()
  cgroup, legacy_freezer: update comment for freezer_css_offline()
  docs, cgroup: add entries for pids to cgroup-v2.rst
  cgroup: don't call cgroup1_pidlist_destroy_all() for v2
  cgroup_freezer: update comment for freezer_css_online()
  cgroup/rstat: desc member cgrp in cgroup_rstat_flush_release
  cgroup/rstat: add cgroup_rstat_lock helpers and tracepoints
  cgroup/pids: Remove superfluous zeroing
  docs: cgroup-v1: Fix description for css_online
  ...

If an error happens in ftrace, ftrace_kill() will prevent disarming
kprobes. Eventually, the ftrace_ops associated with the kprobes will be
freed, yet the kprobes will still be active, and when triggered, they
will use the freed memory, likely resulting in a page fault and panic.

This behavior can be reproduced quite easily, by creating a kprobe and
then triggering a ftrace_kill(). For simplicity, we can simulate an
ftrace error with a kernel module like [1]:

[1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer

  sudo perf probe --add commit_creds
  sudo perf trace -e probe:commit_creds
  # In another terminal
  make
  sudo insmod ftrace_killer.ko  # calls ftrace_kill(), simulating bug
  # Back to perf terminal
  # ctrl-c
  sudo perf probe --del commit_creds

After a short period, a page fault and panic would occur as the kprobe
continues to execute and uses the freed ftrace_ops. While ftrace_kill()
is supposed to be used only in extreme circumstances, it is invoked in
FTRACE_WARN_ON() and so there are many places where an unexpected bug
could be triggered, yet the system may continue operating, possibly
without the administrator noticing. If ftrace_kill() does not panic the
system, then we should do everything we can to continue operating,
rather than leave a ticking time bomb.

Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull KVM updates from Paolo Bonzini:
 "ARM:

   - Move a lot of state that was previously stored on a per vcpu basis
     into a per-CPU area, because it is only pertinent to the host while
     the vcpu is loaded. This results in better state tracking, and a
     smaller vcpu structure.

   - Add full handling of the ERET/ERETAA/ERETAB instructions in nested
     virtualisation. The last two instructions also require emulating
     part of the pointer authentication extension. As a result, the trap
     handling of pointer authentication has been greatly simplified.

   - Turn the global (and not very scalable) LPI translation cache into
     a per-ITS, scalable cache, making non directly injected LPIs much
     cheaper to make visible to the vcpu.

   - A batch of pKVM patches, mostly fixes and cleanups, as the
     upstreaming process seems to be resuming. Fingers crossed!

   - Allocate PPIs and SGIs outside of the vcpu structure, allowing for
     smaller EL2 mapping and some flexibility in implementing more or
     less than 32 private IRQs.

   - Purge stale mpidr_data if a vcpu is created after the MPIDR map has
     been created.

   - Preserve vcpu-specific ID registers across a vcpu reset.

   - Various minor cleanups and improvements.

  LoongArch:

   - Add ParaVirt IPI support

   - Add software breakpoint support

   - Add mmio trace events support

  RISC-V:

   - Support guest breakpoints using ebreak

   - Introduce per-VCPU mp_state_lock and reset_cntx_lock

   - Virtualize SBI PMU snapshot and counter overflow interrupts

   - New selftests for SBI PMU and Guest ebreak

   - Some preparatory work for both TDX and SNP page fault handling.

     This also cleans up the page fault path, so that the priorities of
     various kinds of fauls (private page, no memory, write to read-only
     slot, etc.) are easier to follow.

  x86:

   - Minimize amount of time that shadow PTEs remain in the special
     REMOVED_SPTE state.

     This is a state where the mmu_lock is held for reading but
     concurrent accesses to the PTE have to spin; shortening its use
     allows other vCPUs to repopulate the zapped region while the zapper
     finishes tearing down the old, defunct page tables.

   - Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
     field, which is defined by hardware but left for software use.

     This lets KVM communicate its inability to map GPAs that set bits
     51:48 on hosts without 5-level nested page tables. Guest firmware
     is expected to use the information when mapping BARs; this avoids
     that they end up at a legal, but unmappable, GPA.

   - Fixed a bug where KVM would not reject accesses to MSR that aren't
     supposed to exist given the vCPU model and/or KVM configuration.

   - As usual, a bunch of code cleanups.

  x86 (AMD):

   - Implement a new and improved API to initialize SEV and SEV-ES VMs,
     which will also be extendable to SEV-SNP.

     The new API specifies the desired encryption in KVM_CREATE_VM and
     then separately initializes the VM. The new API also allows
     customizing the desired set of VMSA features; the features affect
     the measurement of the VM's initial state, and therefore enabling
     them cannot be done tout court by the hypervisor.

     While at it, the new API includes two bugfixes that couldn't be
     applied to the old one without a flag day in userspace or without
     affecting the initial measurement. When a SEV-ES VM is created with
     the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
     once the VMSA has been encrypted. Also, the FPU and AVX state will
     be synchronized and encrypted too.

   - Support for GHCB version 2 as applicable to SEV-ES guests.

     This, once more, is only accessible when using the new
     KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.

  x86 (Intel):

   - An initial bunch of prerequisite patches for Intel TDX were merged.

     They generally don't do anything interesting. The only somewhat
     user visible change is a new debugging mode that checks that KVM's
     MMU never triggers a #VE virtualization exception in the guest.

   - Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
     VM-Exit to L1, as per the SDM.

  Generic:

   - Use vfree() instead of kvfree() for allocations that always use
     vcalloc() or __vcalloc().

   - Remove .change_pte() MMU notifier - the changes to non-KVM code are
     small and Andrew Morton asked that I also take those through the
     KVM tree.

     The callback was only ever implemented by KVM (which was also the
     original user of MMU notifiers) but it had been nonfunctional ever
     since calls to set_pte_at_notify were wrapped with
     invalidate_range_start and invalidate_range_end... in 2012.

  Selftests:

   - Enhance the demand paging test to allow for better reporting and
     stressing of UFFD performance.

   - Convert the steal time test to generate TAP-friendly output.

   - Fix a flaky false positive in the xen_shinfo_test due to comparing
     elapsed time across two different clock domains.

   - Skip the MONITOR/MWAIT test if the host doesn't actually support
     MWAIT.

   - Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
     shell script, to play nice with running in a minimal userspace
     environment.

   - Allow skipping the RSEQ test's sanity check that the vCPU was able
     to complete a reasonable number of KVM_RUNs, as the assert can fail
     on a completely valid setup.

     If the test is run on a large-ish system that is otherwise idle,
     and the test isn't affined to a low-ish number of CPUs, the vCPU
     task can be repeatedly migrated to CPUs that are in deep sleep
     states, which results in the vCPU having very little net runtime
     before the next migration due to high wakeup latencies.

   - Define _GNU_SOURCE for all selftests to fix a warning that was
     introduced by a change to kselftest_harness.h late in the 6.9
     cycle, and because forcing every test to #define _GNU_SOURCE is
     painful.

   - Provide a global pseudo-RNG instance for all tests, so that library
     code can generate random, but determinstic numbers.

   - Use the global pRNG to randomly force emulation of select writes
     from guest code on x86, e.g. to help validate KVM's emulation of
     locked accesses.

   - Allocate and initialize x86's GDT, IDT, TSS, segments, and default
     exception handlers at VM creation, instead of forcing tests to
     manually trigger the related setup.

  Documentation:

   - Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
  selftests/kvm: remove dead file
  KVM: selftests: arm64: Test vCPU-scoped feature ID registers
  KVM: selftests: arm64: Test that feature ID regs survive a reset
  KVM: selftests: arm64: Store expected register value in set_id_regs
  KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
  KVM: arm64: Only reset vCPU-scoped feature ID regs once
  KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
  KVM: arm64: Rename is_id_reg() to imply VM scope
  KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
  KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
  KVM: arm64: Fix hvhe/nvhe early alias parsing
  KVM: SEV: Allow per-guest configuration of GHCB protocol version
  KVM: SEV: Add GHCB handling for termination requests
  KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
  KVM: SEV: Add support to handle AP reset MSR protocol
  KVM: x86: Explicitly zero kvm_caps during vendor module load
  KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
  KVM: x86: Fully re-initialize supported_vm_types on vendor module load
  KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
  KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
  ...

Pull CXL updates from Dave Jiang:

 - Three CXL mailbox passthrough commands are added to support the
   populating and clearing of vendor debug logs:
     - Get Log Capabilities
     - Get Supported Log Sub-List Commands
     - Clear Log

 - Add support of Device Phyiscal Address (DPA) to Host Physical Address
   (HPA) translation for CXL events of cxl_dram and cxl_general media.

   This allows user space to figure out which CXL region the event
   occured via trace event.

 - Connect CXL to CPER reporting.

   If a device is configured for firmware first, CXL event records are
   not sent directly to the host. Those records are reported through EFI
   Common Platform Error Records (CPER). Add support to route the CPER
   records through the CXL sub-system in order to provide DPA to HPA
   translation and also event decoding and tracing. This is useful for
   users to determine which system issues may correspond to specific
   hardware events.

 - A number of misc cleanups and fixes:
     - Fix for compile warning of cxl_security_ops
     - Add debug message for invalid interleave granularity
     - Enhancement to cxl-test event testing
     - Add dev_warn() on unsupported mixed mode decoder
     - Fix use of phys_to_target_node() for x86
     - Use helper function for decoder enum instead of open coding
     - Include missing headers for cxl-event
     - Fix MAINTAINERS file entry
     - Fix cxlr_pmem memory leak
     - Cleanup __cxl_parse_cfmws via scope-based resource menagement
     - Convert cxl_pmem_region_alloc() to scope-based resource management

* tag 'cxl-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
  cxl/cper: Remove duplicated GUID defines
  cxl/cper: Fix non-ACPI-APEI-GHES build
  cxl/pci: Process CPER events
  acpi/ghes: Process CXL Component Events
  cxl/region: Convert cxl_pmem_region_alloc to scope-based resource management
  cxl/acpi: Cleanup __cxl_parse_cfmws()
  cxl/region: Fix cxlr_pmem leaks
  cxl/core: Add region info to cxl_general_media and cxl_dram events
  cxl/region: Move cxl_trace_hpa() work to the region driver
  cxl/region: Move cxl_dpa_to_region() work to the region driver
  cxl/trace: Correct DPA field masks for general_media & dram events
  MAINTAINERS: repair file entry in COMPUTE EXPRESS LINK
  cxl/cxl-event: include missing <linux/types.h> and <linux/uuid.h>
  cxl/hdm: Debug, use decoder name function
  cxl: Fix use of phys_to_target_node() for x86
  cxl/hdm: dev_warn() on unsupported mixed mode decoder
  cxl/test: Enhance event testing
  cxl/hdm: Add debug message for invalid interleave granularity
  cxl: Fix compile warning for cxl_security_ops extern
  cxl/mbox: Add Clear Log mailbox command
  ...

Pull nvdimm updates from Ira Weiny:
 "The changes include removing duplicate code and updating the nvdimm
  tree to the current kernel interfaces such as using const for struct
  device_type and changing the platform remove callback signature"

* tag 'libnvdimm-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: remove redundant assignment to variable rc
  ndtest: Convert to platform remove callback returning void
  nvdimm/btt: always set max_integrity_segments
  nvdimm: remove nd_integrity_init
  dax: constify the struct device_type usage
  powerpc/papr_scm: Move duplicate definitions to common header files

Pull modules updates from Luis Chamberlain:
 "Finally something fun. Mike Rapoport does some cleanup to allow us to
  take out module_alloc() out of modules into a new paint shedded
  execmem_alloc() and execmem_free() so to make emphasis these helpers
  are actually used outside of modules.

  It starts with a non-functional changes API rename / placeholders to
  then allow architectures to define their requirements into a new shiny
  struct execmem_info with ranges, and requirements for those ranges.

  Archs now can intitialize this execmem_info as the last part of
  mm_core_init() if they have to diverge from the norm. Each range is a
  known type clearly articulated and spelled out in enum execmem_type.

  Although a lot of this is major cleanup and prep work for future
  enhancements an immediate clear gain is we get to enable KPROBES
  without MODULES now. That is ultimately what motiviated to pick this
  work up again, now with smaller goal as concrete stepping stone"

* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
  kprobes: remove dependency on CONFIG_MODULES
  powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
  x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
  arch: make execmem setup available regardless of CONFIG_MODULES
  powerpc: extend execmem_params for kprobes allocations
  arm64: extend execmem_info for generated code allocations
  riscv: extend execmem_params for generated code allocations
  mm/execmem, arch: convert remaining overrides of module_alloc to execmem
  mm/execmem, arch: convert simple overrides of module_alloc to execmem
  mm: introduce execmem_alloc() and execmem_free()
  module: make module_memory_{alloc,free} more self-contained
  sparc: simplify module_alloc()
  nios2: define virtual address space for modules
  mips: module: rename MODULE_START to MODULES_VADDR
  arm64: module: remove unneeded call to kasan_alloc_module_shadow()
  kallsyms: replace deprecated strncpy with strscpy
  module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.

Booting an LPAE-enabled kernel built with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
fails when starting userspace:

    Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
    CPU: 1 PID: 1 Comm: init Tainted: G        W        N 6.9.0-rc1-koelsch-00004-g7af5b901 #1930
    Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
    Call trace:
     unwind_backtrace from show_stack+0x10/0x14
     show_stack from dump_stack_lvl+0x78/0xa8
     dump_stack_lvl from panic+0x118/0x398
     panic from do_exit+0x1ec/0x938
     do_exit from sys_exit_group+0x0/0x10
    ---[ end Kernel panic - not syncing: Attempted to kill init!  exitcode=0x00000004 ]---

Add the missing memory clobber to cpu_set_ttbcr(), as suggested by
Russell King.

Force inlining of uaccess_save_and_enable(), as suggested by Ard
Biesheuvel.

The latter fixes booting on Koelsch.

Closes: https://lore.kernel.org/r/CAMuHMdWTAJcZ9BReWNhpmsgkOzQxLNb5OhNYxzxv6D5TSh2fwQ@mail.gmail.com/

Fixes: 7af5b901 ("ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Merge tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching update from Petr Mladek:

 - Use more informative names for the livepatch transition states

* tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Rename KLP_* to KLP_TRANSITION_*

Pull printk updates from Petr Mladek:

 - Use no_printk() instead of "if (0) printk()" constructs to avoid
   generating printk index for messages disabled at compile time

 - Remove deprecated strncpy/strcpy from printk.c

 - Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL

* tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: cleanup deprecated uses of strncpy/strcpy
  printk: Remove redundant CONFIG_BASE_FULL
  printk: Change type of CONFIG_BASE_SMALL to bool
  printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  ceph: Use no_printk() helper
  dyndbg: Use *no_printk() helpers
  dev_printk: Add and use dev_no_printk()
  printk: Let no_printk() use _printk()

Pull smb client updates from Steve French:

 - three important fixes to recent netfs conversion to fix various
   xfstest failures, and rmmod oops

 - cleanup patch to fix various GCC-14 warnings

* tag '6.10-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix perf regression with cached writes with netfs conversion
  cifs: Fix locking in cifs_strict_readv()
  cifs: Change from mempool_destroy to mempool_exit for request pools
  smb: smb2pdu.h: Avoid -Wflex-array-member-not-at-end warnings

This file was supposed to be removed in commit 2b7deea3 ("Revert
"kvm: selftests: move base kvm_util.h declarations to kvm_util_base.h""),
but it survived.  Remove it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull sound updates from Takashi Iwai:
 "This one became bigger than usual, not in the total size but rather
  containing lots of small changes all over the places.

  The majority of changes are about ASoC, especially SOF / Intel stuff,
  and we see an interesting work for ASoC DAPM graph visualization,
  while there are many other code cleanup and refactoring, too.

  Core:
   - A deadlock fix at device disconnection
   - A new tool dapm-graph for visualising the DAPM state

  ASoC:
   - Large updates throughout the Intel audio drivers
   - Fixes and clarifications for the DAPM documentation
   - Cleanups of accessors for driver data, module labelling, and for
     constification
   - Modernsation and cleanup work in the Mediatek drivers
   - Several fixes and features for the DaVinci I2S driver
   - New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
     Rockchip RK3308 and Texas Instruments PCM6240

  HD-audio:
   - Cleanup for CONFIG_PM dependencies
   - Cirrus HD-audio codec fixes and quirks

  Others:
   - Series of tree-wide fixes in Makefiles to use *-y
   - Additions of missing module descriptions
   - Scarlett2 USB mixer enhancements
   - A series of legacy emu10k1 fixes and improvements"

* tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (603 commits)
  ALSA: hda/realtek: Drop doubly quirk entry for 103c:8a2e
  ALSA: hda/realtek - fixed headset Mic not show
  ASoC: SOF: amd: Fix build error with built-in config
  ALSA: scarlett2: Increase mixer range to +12dB
  ALSA: scarlett2: Add S/PDIF source selection controls
  ALSA: core: Remove superfluous CONFIG_PM
  ALSA: Fix deadlocks with kctl removals at disconnection
  ASoC: audio-graph-card2: call of_node_get() before of_get_next_child()
  ASoC: SOF: amd: Correct spaces in Makefile
  ASoC: rt715-sdca-sdw: Fix wrong complete waiting in rt715_dev_resume()
  ASoC: Intel: sof_sdw_rt_amp: use dai parameter
  ASoC: Intel: sof_sdw: add dai parameter to rtd_init callback
  ASoC: Intel: sof_sdw: use .controls/.widgets to add controls/widgets
  ASoC: Intel: sof_sdw: add controls and dapm widgets in codec_info
  ASoC: Intel: sof_sdw: use generic name for controls/widgets
  ASoC: Intel: sof_sdw_cs_amp: rename Speakers to Speaker
  ASoC: Intel: maxim-common: change max98373 data to static
  ASoC: Intel: sof_sdw: add max98373 dapm routes
  ASoC: Intel: sof_rt5682: use max_98373_dai_link function
  ASoC: Intel: sof_nau8825: use max_98373_dai_link function
  ...

Pull fbdev updates from Helge Deller:
 "Code cleanups for offb, shmobile, sisfb, savage, au1200fb, uvesafb,
  omap2 and sh7760fb, as well as the addition of some HAS_IOPORT
  dependencies and adjustment of generated logo file to make build
  reproducible"

* tag 'fbdev-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: offb: replace of_node_put with __free(device_node)
  fbdev: savage: Handle err return when savagefb_check_var failed
  video: hdmi: prefer length specifier in format over string copying
  fbdev: uvesafb: replace deprecated strncpy with strscpy_pad
  fbdev: au1200fb: replace deprecated strncpy with strscpy
  fbdev: fsl-diu-fb: replace deprecated strncpy with strscpy_pad
  video: logo: Drop full path of the input filename in generated file
  fbdev: add HAS_IOPORT dependencies
  fbdev: sh7760fb: allow modular build
  fbdev: sisfb: hide unused variables
  fbdev: shmobile: fix snprintf truncation
  fbdev: omap2: replace of_graph_get_next_endpoint()

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm subsystems for 6.10.

  In drivers the main thing is a new driver for ARM Mali firmware based
  GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
  scattered changes to everything else.

  In the core a bunch of headers and Kconfig was refactored, along with
  the addition of a new panic handler which is meant to provide a user
  friendly message when a panic happens and graphical display is
  enabled.

  New drivers:
   - panthor: ARM Mali/Immortalis CSF-based GPU driver

  Core:
   - add a CONFIG_DRM_WERROR option
   - make more headers self-contained
   - grab resv lock in pin/unpin
   - fix vmap resv locking
   - EDID/eDP panel matching
   - Kconfig cleanups
   - DT sound bindings
   - Add SIZE_HINTS property for cursor planes
   - Add struct drm_edid_product_id and helpers.
   - Use drm device based logging in more drm functions.
   - drop seq_file.h from a bunch of places
   - use drm_edid driver conversions

  dp:
   - DP Tunnel documentation
   - MST read sideband cap
   - Adaptive sync SDP prep work

  ttm:
   - improve placement for TTM BOs in idle/busy handling

  panic:
   - Fixes for drm-panic, and option to test it.
   - Add drm panic to simpledrm, mgag200, imx, ast

  bridge:
   - improve init ordering
   - adv7511: allow GPIO pin sharing
   - tc358775: add tc358675 support

  panel:
   - AUO B120XAN01.0
   - Samsung s6e3fa7
   - BOE NT116WHM-N44
   - CMN N116BCA-EA1,
   - CrystalClear CMT430B19N00
   - Startek KD050HDFIA020-C020A
   - powertip PH128800T006-ZHC01
   - Innolux G121X1-L03
   - LG sw43408
   - Khadas TS050 V2
   - EDO RM69380 OLED
   - CSOT MNB601LS1-1

  amdgpu:
   - HDCP/ODM/RAS fixes
   - Devcoredump improvements
   - Expose VCN activity via sysfs
   - SMY 13.0.x updates
   - Enable fast updates on DCN 3.1.4
   - Add dclk and vclk reporting on additional devices
   - Add ACA RAS infrastructure
   - Implement TLB flush fence
   - EEPROM handling fixes
   - SMUIO 14.0.2 support
   - SMU 14.0.1 Updates
   - SMU 14.0.2 support
   - Sync page table freeing with TLB flushes
   - DML2 refactor
   - DC debug improvements
   - DCN 3.5.x Updates
   - GPU reset fixes
   - HDP fix for second GFX pipe on GC 10.x
   - Enable secondary GFX pipe on GC 10.3
   - Refactor and clean up BACO/BOCO/BAMACO handling
   - Remove invalid TTM resource start check
   - UAF fix in VA IOCTL
   - GPUVM page fault redirection to secondary IH rings for IH 6.x
   - Initial support for mapping kernel queues via MES
   - Fix VRAM memory accounting

  amdkfd:
   - MQD handling cleanup
   - Preemption handling fixes for XCDs
   - TLB flush fix for GC 9.4.2
   - Properly clean up workqueue during module unload
   - Fix memory leak process create failure
   - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
   - Fix eviction fence handling
   - Fix leak in GPU memory allocation failure case
   - DMABuf import handling fix
   - Enable SQ watchpoint for gfx10

  i915:
   - Adding new DG2 PCI ID
   - add context hints for GT frequency
   - enable only one CCS for compute workloads
   - new workarounds
   - Fix UAF on destroy against retire race and remove two earlier partial fixes
   - Limit the reserved VM space to only the platforms that need it
   - Fix gt reset with GuC submission is disable
   - Add and use gt_to_guc() wrapper

  i915/xe display:
   - Lunar Lake display enabling, including cdclk and other refactors
   - BIOS/VBT/opregion related refactor
   - Digital port related refactor/clean-up
   - Fix 2s boot time regression on DP panel replay init
   - Remove duplication on audio enable/disable on SDVO and g4x+ DP
   - Disable AuxCCS framebuffers if built for Xe
   - Make crtc disable more atomic
   - Increase DP idle pattern wait timeout to 2ms
   - Start using container_of_const() for some extra const safety
   - Fix Jasper Lake boot freeze
   - Enable MST mode for 128b/132b single-stream sideband
   - Enable Adaptive Sync SDP Support for DP
   - Fix MTL supported DP rates - removal of UHBR13.5
   - PLL refactoring
   - Limit eDP MSO pipe only for display version 20
   - More display refactor towards independence from i915 dev_priv
   - Convert i915/xe fbdev to DRM client
   - More initial work to make display code more independent from i915

  xe:
   - improved error capture
   - clean up some uAPI leftovers
   - devcoredump update
   - Add BMG mocs table
   - Handle GSCCS ER interrupt
   - Implement xe2- and GuC workarounds
   - struct xe_device cleanup
   - Hwmon updates
   - Add LRC parsing for more GPU instruction
   - Increase VM_BIND number of per-ioctl Ops
   - drm/xe: Add XE_BO_GGTT_INVALIDATE flag
   - Initial development for SR-IOV support
   - Add new PCI IDs to DG2 platform
   - Move userptr over to start using hmm_range_fault

  msm:
   - Switched to generating register header files during build process
     instead of shipping pre-generated headers
   - Merged DPU and MDP4 format databases.
   - DP:
     - Stop using compat string to distinguish DP and eDP cases
     - Added support for X Elite platform (X1E80100)
     - Reworked DP aux/audio support
     - Added SM6350 DP to the bindings
   - GPU:
     - a7xx perfcntr reg fixes
     - MAINTAINERS updates
     - a750 devcoredump support

  radeon:
   - Silence UBSAN warnings related to flexible arrays

  nouveau:
   - move some uAPI objects to uapi headers

  omapdrm:
   - console fix

  ast:
   - add i2c polling

  qaic:
   - add debugfs entries

  exynos:
   - fix platform_driver .owner
   - drop cleanup code

  mediatek:
   - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
   - Add GAMMA 12-bit LUT support for MT8188
   - Rename mtk_drm_* to mtk_*
   - Drop driver owner initialization
   - Correct calculation formula of PHY Timing"

* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
  drm/xe/ads: Use flexible-array
  drm/xe: Use ordered WQ for G2H handler
  drm/msm/gen_header: allow skipping the validation
  drm/msm/a6xx: Cleanup indexed regs const'ness
  drm/msm: Add devcoredump support for a750
  drm/msm: Adjust a7xx GBIF debugbus dumping
  drm/msm: Update a6xx registers XML
  drm/msm: Fix imported a750 snapshot header for upstream
  drm/msm: Import a750 snapshot registers from kgsl
  MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
  MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
  drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
  drm/msm/adreno: fix CP cycles stat retrieval on a7xx
  drm/msm/a7xx: allow writing to CP_BV counter selection registers
  drm: zynqmp_dpsub: Always register bridge
  Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
  drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
  drm/fbdev-generic: Do not set physical framebuffer address
  drm/panthor: Fix the FW reset logic
  drm/panthor: Make sure we handle 'unknown group state' case properly
  ...

Merge tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull asymmetric keys update from Jarkko Sakkinen:
 "Add a self-test testing PCKS#7 signed data against ECDSA key and
  couple of bug fixes for missing deps"

* tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  certs: Add ECDSA signature verification self-test
  certs: Move RSA self-test data to separate file
  KEYS: asymmetric: Add missing dependencies of FIPS_SIGNATURE_SELFTEST
  KEYS: asymmetric: Add missing dependency on CRYPTO_SIG

Pull integrity updates from Mimi Zohar:
 "Two IMA changes, one EVM change, a use after free bug fix, and a code
  cleanup to address "-Wflex-array-member-not-at-end" warnings:

   - The existing IMA {ascii, binary}_runtime_measurements lists include
     a hard coded SHA1 hash. To address this limitation, define per TPM
     enabled hash algorithm {ascii, binary}_runtime_measurements lists

   - Close an IMA integrity init_module syscall measurement gap by
     defining a new critical-data record

   - Enable (partial) EVM support on stacked filesystems (overlayfs).
     Only EVM portable & immutable file signatures are copied up, since
     they do not contain filesystem specific metadata"

* tag 'integrity-v6.10' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: add crypto agility support for template-hash algorithm
  evm: Rename is_unsupported_fs to is_unsupported_hmac_fs
  fs: Rename SB_I_EVM_UNSUPPORTED to SB_I_EVM_HMAC_UNSUPPORTED
  evm: Enforce signatures on unsupported filesystem for EVM_INIT_X509
  ima: re-evaluate file integrity on file metadata change
  evm: Store and detect metadata inode attributes changes
  ima: Move file-change detection variables into new structure
  evm: Use the metadata inode to calculate metadata hash
  evm: Implement per signature type decision in security_inode_copy_up_xattr
  security: allow finer granularity in permitting copy-up of security xattrs
  ima: Rename backing_inode to real_inode
  integrity: Avoid -Wflex-array-member-not-at-end warnings
  ima: define an init_module critical data record
  ima: Fix use-after-free on a dentry's dname.name

Pull selinux updates from Paul Moore:

 - Attempt to pre-allocate the SELinux status page so it doesn't appear
   to userspace that we are skipping SELinux policy sequence numbers

 - Reject invalid SELinux policy bitmaps with an error at policy load
   time

 - Consistently use the same type, u32, for ebitmap offsets

 - Improve the "symhash" hash function for better distribution on common
   policies

 - Correct a number of printk format specifiers in the ebitmap code

 - Improved error checking in sel_write_load()

 - Ensure we have a proper return code in the
   filename_trans_read_helper_compat() function

 - Make better use of the current_sid() helper function

 - Allow for more hash table statistics when debugging is enabled

 - Migrate from printk_ratelimit() to pr_warn_ratelimited()

 - Miscellaneous cleanups and tweaks to selinux_lsm_getattr()

 - More consitification work in the conditional policy space

* tag 'selinux-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: constify source policy in cond_policydb_dup()
  selinux: avoid printk_ratelimit()
  selinux: pre-allocate the status page
  selinux: clarify return code in filename_trans_read_helper_compat()
  selinux: use u32 as bit position type in ebitmap code
  selinux: improve symtab string hashing
  selinux: dump statistics for more hash tables
  selinux: make more use of current_sid()
  selinux: update numeric format specifiers for ebitmaps
  selinux: improve error checking in sel_write_load()
  selinux: cleanup selinux_lsm_getattr()
  selinux: reject invalid ebitmaps

Pull lsm updates from Paul Moore:

 - The security/* portion of the effort to remove the empty sentinel
   elements at the end of the ctl_table arrays

 - Update the file list associated with the LSM / "SECURITY SUBSYSTEM"
   entry in the MAINTAINERS file (and then fix a typo in then update)

* tag 'lsm-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  MAINTAINERS: repair file entry in SECURITY SUBSYSTEM
  MAINTAINERS: update the LSM file list
  lsm: remove the now superfluous sentinel element from ctl_table array