- 28 Mar, 2018 40 commits
-
-
Hans de Goede authored
commit 62ac3f73 upstream. There have been reports of the Crucial M500 480GB model not working with LPM set to min_power / med_power_with_dipm level. It has not been tested with medium_power, but that typically has no measurable power-savings. Note the reporters Crucial_CT480M500SSD3 has a firmware version of MU03 and there is a MU05 update available, but that update does not mention any LPM fixes in its changelog, so the quirk matches all firmware versions. In my experience the LPM problems with (older) Crucial SSDs seem to be limited to higher capacity versions of the SSDs (different firmware?), so this commit adds a NOLPM quirk for the 480 and 960GB versions of the M500, to avoid LPM causing issues with these SSDs. Cc: stable@vger.kernel.org Reported-and-tested-by:
Martin Steigerwald <martin@lichtvoll.de> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ju Hyung Park authored
commit ca6bfcb2 upstream. Samsung explicitly states that queued TRIM is supported for Linux with 860 PRO and 860 EVO. Make the previous blacklist to cover only 840 and 850 series. Signed-off-by:
Park Ju Hyung <qkrwngud825@gmail.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Kai-Heng Feng authored
commit b17e5729 upstream. After Laptop Mode Tools starts to use min_power for LPM, a user found out Crucial BX100 SSD can't get mounted. Crucial BX100 SSD 500GB drive don't work well with min_power. This also happens to med_power_with_dipm. So let's disable LPM for Crucial BX100 SSD 500GB drive. BugLink: https://bugs.launchpad.net/bugs/1726930Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Hans de Goede authored
commit 9c7be59f upstream. Various people have reported the Crucial MX100 512GB model not working with LPM set to min_power. I've now received a report that it also does not work with the new med_power_with_dipm level. It does work with medium_power, but that has no measurable power-savings and given the amount of people being bitten by the other levels not working, this commit just disables LPM altogether. Note all reporters of this have either the 512GB model (max capacity), or are not specifying their SSD's size. So for now this quirk assumes this is a problem with the 512GB model only. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=89261 Buglink: https://github.com/linrunner/TLP/issues/84 Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
commit 2c1ec6fd upstream. syzkaller hit a WARN() in ata_bmdma_qc_issue() when writing to /dev/sg0. This happened because it issued an ATA pass-through command (ATA_16) where the protocol field indicated that NCQ should be used -- but the device did not support NCQ. We could just remove the WARN() from libata-sff.c, but the real problem seems to be that the SCSI -> ATA translation code passes through NCQ commands without verifying that the device actually supports NCQ. Fix this by adding the appropriate check to ata_scsi_pass_thru(). Here's reproducer that works in QEMU when /dev/sg0 refers to a disk of the default type ("82371SB PIIX3 IDE"): #include <fcntl.h> #include <unistd.h> int main() { char buf[53] = { 0 }; buf[36] = 0x85; /* ATA_16 */ buf[37] = (12 << 1); /* FPDMA */ buf[38] = 0x1; /* Has data */ buf[51] = 0xC8; /* ATA_CMD_READ */ write(open("/dev/sg0", O_RDWR), buf, sizeof(buf)); } Fixes: ee7fb331 ("libata: add support for NCQ commands for SG interface") Reported-by: syzbot+2f69ca28df61bdfc77cd36af2e789850355a221e@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
commit 9173e5e8 upstream. syzkaller hit a WARN() in ata_qc_issue() when writing to /dev/sg0. This happened because it issued a READ_6 command with no data buffer. Just remove the WARN(), as it doesn't appear indicate a kernel bug. The expected behavior is to fail the command, which the code does. Here's a reproducer that works in QEMU when /dev/sg0 refers to a disk of the default type ("82371SB PIIX3 IDE"): #include <fcntl.h> #include <unistd.h> int main() { char buf[42] = { [36] = 0x8 /* READ_6 */ }; write(open("/dev/sg0", O_RDWR), buf, sizeof(buf)); } Fixes: f92a2636 ("libata: change ATA_QCFLAG_DMAMAP semantics") Reported-by: syzbot+f7b556d1766502a69d85071d2ff08bd87be53d0f@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # v2.6.25+ Signed-off-by:
-
Eric Biggers authored
commit 058f58e2 upstream. syzkaller reported a crash in ata_bmdma_fill_sg() when writing to /dev/sg1. The immediate cause was that the ATA command's scatterlist was not DMA-mapped, which causes 'pi - 1' to underflow, resulting in a write to 'qc->ap->bmdma_prd[0xffffffff]'. Strangely though, the flag ATA_QCFLAG_DMAMAP was set in qc->flags. The root cause is that when __ata_scsi_queuecmd() is preparing to relay a SCSI command to an ATAPI device, it doesn't correctly validate the CDB length before copying it into the 16-byte buffer 'cdb' in 'struct ata_queued_cmd'. Namely, it validates the fixed CDB length expected based on the SCSI opcode but not the actual CDB length, which can be larger due to the use of the SG_NEXT_CMD_LEN ioctl. Since 'flags' is the next member in ata_queued_cmd, a buffer overflow corrupts it. Fix it by requiring that the actual CDB length be <= 16 (ATAPI_CDB_LEN). [Really it seems the length should be required to be <= dev->cdb_len, but the current behavior seems to have been intentionally introduced by commit 607126c2 ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") to work around a userspace bug in mplayer. Probably the workaround is no longer needed (mplayer was fixed in 2007), but continuing to allow lengths to up 16 appears harmless for now.] Here's a reproducer that works in QEMU when /dev/sg1 refers to the CD-ROM drive that qemu-system-x86_64 creates by default: #include <fcntl.h> #include <sys/ioctl.h> #include <unistd.h> #define SG_NEXT_CMD_LEN 0x2283 int main() { char buf[53] = { [36] = 0x7e, [52] = 0x02 }; int fd = open("/dev/sg1", O_RDWR); ioctl(fd, SG_NEXT_CMD_LEN, &(int){ 17 }); write(fd, buf, sizeof(buf)); } The crash was: BUG: unable to handle kernel paging request at ffff8cb97db37ffc IP: ata_bmdma_fill_sg drivers/ata/libata-sff.c:2623 [inline] IP: ata_bmdma_qc_prep+0xa4/0xc0 drivers/ata/libata-sff.c:2727 PGD fb6c067 P4D fb6c067 PUD 0 Oops: 0002 [#1] SMP CPU: 1 PID: 150 Comm: syz_ata_bmdma_q Not tainted 4.15.0-next-20180202 #99 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [...] Call Trace: ata_qc_issue+0x100/0x1d0 drivers/ata/libata-core.c:5421 ata_scsi_translate+0xc9/0x1a0 drivers/ata/libata-scsi.c:2024 __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4326 [inline] ata_scsi_queuecmd+0x8c/0x210 drivers/ata/libata-scsi.c:4375 scsi_dispatch_cmd+0xa2/0xe0 drivers/scsi/scsi_lib.c:1727 scsi_request_fn+0x24c/0x530 drivers/scsi/scsi_lib.c:1865 __blk_run_queue_uncond block/blk-core.c:412 [inline] __blk_run_queue+0x3a/0x60 block/blk-core.c:432 blk_execute_rq_nowait+0x93/0xc0 block/blk-exec.c:78 sg_common_write.isra.7+0x272/0x5a0 drivers/scsi/sg.c:806 sg_write+0x1ef/0x340 drivers/scsi/sg.c:677 __vfs_write+0x31/0x160 fs/read_write.c:480 vfs_write+0xa7/0x160 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0x4d/0xc0 fs/read_write.c:581 do_syscall_64+0x5e/0x110 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x21/0x86 Fixes: 607126c2 ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") Reported-by: syzbot+1ff6f9fcc3c35f1c72a95e26528c8e7e3276e4da@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # v2.6.24+ Signed-off-by:
-
Takashi Iwai authored
commit f44cb4b1 upstream. The Atheros 1525/QCA6174 BT doesn't seem working properly on the recent kernels, as it tries to load a wrong firmware ar3k/AthrBT_0x00000200.dfu and it fails. This seems to have been a problem for some time, and the known workaround is to apply BTUSB_QCA_ROM quirk instead of BTUSB_ATH3012. The device in question is: T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=3004 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1082504Reported-by:
Ivan Levshin <ivan.levshin@microfocus.com> Tested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Kai-Heng Feng authored
commit 0c6e5266 upstream. The issue can be reproduced before commit fd865802 ("Bluetooth: btusb: fix QCA Rome suspend/resume") gets introduced, so the reset resume quirk is still needed for this system. T: Bus=01 Lev=01 Prnt=01 Port=13 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e007 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Cc: stable@vger.kernel.org Cc: Brian Norris <briannorris@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit f0e8c611 upstream. Commit 1fdb9269 ("Bluetooth: btusb: Use DMI matching for QCA reset_resume quirking"), added the Lenovo Yoga 920 to the btusb_needs_reset_resume_table. Testing has shown that this is a false positive and the problems where caused by issues with the initial fix: commit fd865802 ("Bluetooth: btusb: fix QCA Rome suspend/resume"), which has already been reverted. So the QCA Rome BT in the Yoga 920 does not need a reset-resume quirk at all and this commit removes it from the btusb_needs_reset_resume_table. Note that after this commit the btusb_needs_reset_resume_table is now empty. It is kept around on purpose, since this whole series of commits started for a reason and there are actually broken platforms around, which need to be added to it. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 1fdb9269 ("Bluetooth: btusb: Use DMI matching for QCA ...") Cc: stable@vger.kernel.org Cc: Brian Norris <briannorris@chromium.org> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by:
Kevin Fenzi <kevin@scrye.com> Suggested-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 93b0beae upstream. Driver uses alias from Device Tree as an index of pin controller data array. In case of a wrong DTB or an out-of-tree DTB, the alias could be outside of this data array leading to out-of-bounds access. Depending on binary and memory layout, this could be handled properly (showing error like "samsung-pinctrl 3860000.pinctrl: driver data not available") or could lead to exceptions. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Fixes: 30574f0d ("pinctrl: add samsung pinctrl and gpiolib driver") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Michael Kelley authored
commit 655296c8 upstream. Fix bugs in signaling the Hyper-V host when freeing space in the host->guest ring buffer: 1. The interrupt_mask must not be used to determine whether to signal on the host->guest ring buffer 2. The ring buffer write_index must be read (via hv_get_bytes_to_write) *after* pending_send_sz is read in order to avoid a race condition 3. Comparisons with pending_send_sz must treat the "equals" case as not-enough-space 4. Don't signal if the pending_send_sz feature is not present. Older versions of Hyper-V that don't implement this feature will poll. Fixes: 03bad714 ("vmbus: more host signalling avoidance") Cc: Stable <stable@vger.kernel.org> # 4.14 and above Signed-off-by:
Michael Kelley <mhkelley@outlook.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Leon Romanovsky authored
commit f3f134f5 upstream. The failure in rereg_mr flow caused to set garbage value (error value) into mr->umem pointer. This pointer is accessed at the release stage and it causes to the following crash. There is not enough to simply change umem to point to NULL, because the MR struct is needed to be accessed during MR deregistration phase, so delay kfree too. [ 6.237617] BUG: unable to handle kernel NULL pointer dereference a 0000000000000228 [ 6.238756] IP: ib_dereg_mr+0xd/0x30 [ 6.239264] PGD 80000000167eb067 P4D 80000000167eb067 PUD 167f9067 PMD 0 [ 6.240320] Oops: 0000 [#1] SMP PTI [ 6.240782] CPU: 0 PID: 367 Comm: dereg Not tainted 4.16.0-rc1-00029-gc198fafe0453 #183 [ 6.242120] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 6.244504] RIP: 0010:ib_dereg_mr+0xd/0x30 [ 6.245253] RSP: 0018:ffffaf5d001d7d68 EFLAGS: 00010246 [ 6.246100] RAX: 0000000000000000 RBX: ffff95d4172daf00 RCX: 0000000000000000 [ 6.247414] RDX: 00000000ffffffff RSI: 0000000000000001 RDI: ffff95d41a317600 [ 6.248591] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [ 6.249810] R10: ffff95d417033c10 R11: 0000000000000000 R12: ffff95d4172c3a80 [ 6.251121] R13: ffff95d4172c3720 R14: ffff95d4172c3a98 R15: 00000000ffffffff [ 6.252437] FS: 0000000000000000(0000) GS:ffff95d41fc00000(0000) knlGS:0000000000000000 [ 6.253887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.254814] CR2: 0000000000000228 CR3: 00000000172b4000 CR4: 00000000000006b0 [ 6.255943] Call Trace: [ 6.256368] remove_commit_idr_uobject+0x1b/0x80 [ 6.257118] uverbs_cleanup_ucontext+0xe4/0x190 [ 6.257855] ib_uverbs_cleanup_ucontext.constprop.14+0x19/0x40 [ 6.258857] ib_uverbs_close+0x2a/0x100 [ 6.259494] __fput+0xca/0x1c0 [ 6.259938] task_work_run+0x84/0xa0 [ 6.260519] do_exit+0x312/0xb40 [ 6.261023] ? __do_page_fault+0x24d/0x490 [ 6.261707] do_group_exit+0x3a/0xa0 [ 6.262267] SyS_exit_group+0x10/0x10 [ 6.262802] do_syscall_64+0x75/0x180 [ 6.263391] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 6.264253] RIP: 0033:0x7f1b39c49488 [ 6.264827] RSP: 002b:00007ffe2de05b68 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 6.266049] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1b39c49488 [ 6.267187] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 6.268377] RBP: 00007f1b39f258e0 R08: 00000000000000e7 R09: ffffffffffffff98 [ 6.269640] R10: 00007f1b3a147260 R11: 0000000000000246 R12: 00007f1b39f258e0 [ 6.270783] R13: 00007f1b39f2ac20 R14: 0000000000000000 R15: 0000000000000000 [ 6.271943] Code: 74 07 31 d2 e9 25 d8 6c 00 b8 da ff ff ff c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 07 53 48 8b 5f 08 <48> 8b 80 28 02 00 00 e8 f7 d7 6c 00 85 c0 75 04 3e ff 4b 18 5b [ 6.274927] RIP: ib_dereg_mr+0xd/0x30 RSP: ffffaf5d001d7d68 [ 6.275760] CR2: 0000000000000228 [ 6.276200] ---[ end trace a35641f1c474bd20 ]--- Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> Reported-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Chen-Yu Tsai authored
commit 5682e268 upstream. When support for the A31/A31s CCU was first added, the clock ops for the CLK_OUT_* clocks was set to the wrong type. The clocks are MP-type, but the ops was set for div (M) clocks. This went unnoticed until now. This was because while they are different clocks, their data structures aligned in a way that ccu_div_ops would access the second ccu_div_internal and ccu_mux_internal structures, which were valid, if not incorrect. Furthermore, the use of these CLK_OUT_* was for feeding a precise 32.768 kHz clock signal to the WiFi chip. This was achievable by using the parent with the same clock rate and no divider. So the incorrect divider setting did not affect this usage. Commit 946797aa ("clk: sunxi-ng: Support fixed post-dividers on MP style clocks") added a new field to the ccu_mp structure, which broke the aforementioned alignment. Now the system crashes as div_ops tries to look up a nonexistent table. Reported-by:
Philipp Rossak <embed3d@gmail.com> Tested-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Boris Brezillon authored
commit 7997f3b2 upstream. CM_PLLx and A2W_XOSC_CTRL registers are accessed by different clock handlers and must be accessed with ->regs_lock held. Update the sections where this protection is missing. Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Boris Brezillon authored
commit 49012d1b upstream. ana->maskX values are already '~'-ed in bcm2835_pll_set_rate(). Remove the '~' in the definition to fix ANA setup. Note that this commit fixes a long standing bug preventing one from using an HDMI display if it's plugged after the FW has booted Linux. This is because PLLH is used by the HDMI encoder to generate the pixel clock. Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Tetsuo Handa authored
commit 2e517d68 upstream. Dave Jones reported fs_reclaim lockdep warnings. ============================================ WARNING: possible recursive locking detected 4.15.0-rc9-backup-debug+ #1 Not tainted -------------------------------------------- sshd/24800 is trying to acquire lock: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 but task is already holding lock: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(fs_reclaim); lock(fs_reclaim); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by sshd/24800: #0: (sk_lock-AF_INET6){+.+.}, at: [<000000001a069652>] tcp_sendmsg+0x19/0x40 #1: (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30 stack backtrace: CPU: 3 PID: 24800 Comm: sshd Not tainted 4.15.0-rc9-backup-debug+ #1 Call Trace: dump_stack+0xbc/0x13f __lock_acquire+0xa09/0x2040 lock_acquire+0x12e/0x350 fs_reclaim_acquire.part.102+0x29/0x30 kmem_cache_alloc+0x3d/0x2c0 alloc_extent_state+0xa7/0x410 __clear_extent_bit+0x3ea/0x570 try_release_extent_mapping+0x21a/0x260 __btrfs_releasepage+0xb0/0x1c0 btrfs_releasepage+0x161/0x170 try_to_release_page+0x162/0x1c0 shrink_page_list+0x1d5a/0x2fb0 shrink_inactive_list+0x451/0x940 shrink_node_memcg.constprop.88+0x4c9/0x5e0 shrink_node+0x12d/0x260 try_to_free_pages+0x418/0xaf0 __alloc_pages_slowpath+0x976/0x1790 __alloc_pages_nodemask+0x52c/0x5c0 new_slab+0x374/0x3f0 ___slab_alloc.constprop.81+0x47e/0x5a0 __slab_alloc.constprop.80+0x32/0x60 __kmalloc_track_caller+0x267/0x310 __kmalloc_reserve.isra.40+0x29/0x80 __alloc_skb+0xee/0x390 sk_stream_alloc_skb+0xb8/0x340 tcp_sendmsg_locked+0x8e6/0x1d30 tcp_sendmsg+0x27/0x40 inet_sendmsg+0xd0/0x310 sock_write_iter+0x17a/0x240 __vfs_write+0x2ab/0x380 vfs_write+0xfb/0x260 SyS_write+0xb6/0x140 do_syscall_64+0x1e5/0xc05 entry_SYSCALL64_slow_path+0x25/0x25 This warning is caused by commit d92a8cfc ("locking/lockdep: Rework FS_RECLAIM annotation") which replaced the use of lockdep_{set,clear}_current_reclaim_state() in __perform_reclaim() and lockdep_trace_alloc() in slab_pre_alloc_hook() with fs_reclaim_acquire()/ fs_reclaim_release(). Since __kmalloc_reserve() from __alloc_skb() adds __GFP_NOMEMALLOC | __GFP_NOWARN to gfp_mask, and all reclaim path simply propagates __GFP_NOMEMALLOC, fs_reclaim_acquire() in slab_pre_alloc_hook() is trying to grab the 'fake' lock again when __perform_reclaim() already grabbed the 'fake' lock. The /* this guy won't enter reclaim */ if ((current->flags & PF_MEMALLOC) && !(gfp_mask & __GFP_NOMEMALLOC)) return false; test which causes slab_pre_alloc_hook() to try to grab the 'fake' lock was added by commit cf40bd16 ("lockdep: annotate reclaim context (__GFP_NOFS)"). But that test is outdated because PF_MEMALLOC thread won't enter reclaim regardless of __GFP_NOMEMALLOC after commit 341ce06f ("page allocator: calculate the alloc_flags for allocation only once") added the PF_MEMALLOC safeguard ( /* Avoid recursion of direct reclaim */ if (p->flags & PF_MEMALLOC) goto nopage; in __alloc_pages_slowpath()). Thus, let's fix outdated test by removing __GFP_NOMEMALLOC test and allow __need_fs_reclaim() to return false. Link: http://lkml.kernel.org/r/201802280650.FJC73911.FOSOMLJVFFQtHO@I-love.SAKURA.ne.jp Fixes: d92a8cfc ("locking/lockdep: Rework FS_RECLAIM annotation") Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
Dave Jones <davej@codemonkey.org.uk> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hans de Goede authored
commit 28b2182d upstream. Like the Highpoint Rocketraid 642L and cards using a Marvel 88SE9235 controller in general, this RAID card also supports AHCI mode and short of a custom driver, this is the only way to make it work under Linux. Note that even though the card is called to 644L, it has a product-id of 0x0645. Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Hans de Goede authored
commit 1903be82 upstream. The Highpoint RocketRAID 644L uses a Marvel 88SE9235 controller, as with other Marvel controllers this needs a function 1 DMA alias quirk. Note the RocketRAID 642L uses the same Marvel 88SE9235 controller and already is listed with a function 1 DMA alias quirk. Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106Signed-off-by:
-
Evgeniy Didin authored
commit 47b7de2f upstream. It was found that in IDMAC mode after soft-reset driver switches to PIO mode. That's what happens in case of DTO timeout overflow calculation failure: 1. soft-reset is called 2. driver restarts dma 3. descriptors states are checked, one of descriptor is owned by the IDMAC. 4. driver can't use DMA and then switches to PIO mode. Failure was already fixed in: https://www.spinics.net/lists/linux-mmc/msg48125.html. Behaviour while soft-reset is not something we except or even want to happen. So we switch from dw_mci_idmac_reset to dw_mci_idmac_init, so descriptors are cleaned before starting dma. And while at it explicitly zero des0 which otherwise might contain garbage as being allocated by dmam_alloc_coherent(). Signed-off-by:
Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Jaehoon Chung authored
commit e22842dd upstream. Before enabling the clock, dwmmc exynos driver is trying to access the register. Then the kernel panic can be occurred. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Tested-by:
-
Evgeniy Didin authored
commit c7151602 upstream. The commit 9d9491a7 ("mmc: dw_mmc: Fix the DTO timeout calculation") and commit 4c2357f5 ("mmc: dw_mmc: Fix the CTO timeout calculation") made changes, which cause multiply overflow for 32-bit systems. The broken timeout calculations leads to unexpected ETIMEDOUT errors and causes stacktrace splat (such as below) during normal data exchange with SD-card. | Running : 4M-check-reassembly-tcp-cmykw2-rotatew2.out -v0 -w1 | - Info: Finished target initialization. | mmcblk0: error -110 transferring data, sector 320544, nr 2048, cmd | response 0x900, card status 0x0 DIV_ROUND_UP_ULL helps to escape usage of __udivdi3() from libgcc and so code gets compiled on all 32-bit platforms as opposed to usage of DIV_ROUND_UP when we may only compile stuff on a very few arches. Lets cast this multiply to u64 type to prevent the overflow. Fixes: 9d9491a7 ("mmc: dw_mmc: Fix the DTO timeout calculation") Fixes: 4c2357f5 ("mmc: dw_mmc: Fix the CTO timeout calculation") Tested-by:
Vineet Gupta <Vineet.Gupta1@synopsys.com> Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com> # ARC STAR 9001306872 HSDK, sdio: board crashes when copying big files Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by:
-
Bastian Stender authored
commit e74ef219 upstream. PARTITION_CONFIG is cached in mmc_card->ext_csd.part_config and the currently active partition in mmc_blk_data->part_curr. These caches do not always reflect changes if the ioctl call modifies the PARTITION_CONFIG registers, e.g. by changing BOOT_PARTITION_ENABLE. Write the PARTITION_CONFIG value extracted from the ioctl call to the cache and update the currently active partition accordingly. This ensures that the user space cannot change the values behind the kernel's back. The next call to mmc_blk_part_switch() will operate on the data set by the ioctl and reflect the changes appropriately. Signed-off-by:
Bastian Stender <bst@pengutronix.de> Signed-off-by:
Jan Luebbe <jlu@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Dirk Behme authored
commit dbe7dc6b upstream. Certain Micron eMMC v4.5 cards might get broken when HPI feature is used and hence this patch disables the HPI feature for such buggy cards. In U-Boot, these cards are reported as Manufacturer: Micron (ID: 0xFE) OEM: 0x4E Name: MMC32G Revision: 19 (0x13) Serial: 959241022 Manufact. date: 8/2015 (0x82) CRC: 0x00 Tran Speed: 52000000 Rd Block Len: 512 MMC version 4.5 High Capacity: Yes Capacity: 29.1 GiB Boot Partition Size: 16 MiB Bus Width: 8-bit According to JEDEC JEP106 manufacturer 0xFE is Numonyx, which was bought by Micron. Signed-off-by:
Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by:
Mark Craske <Mark_Craske@mentor.com> Cc: <stable@vger.kernel.org> # 4.8+ Signed-off-by:
-
Adrian Hunter authored
commit c658dc58 upstream. Swap the positions of blk_addr and blksz in the tracepoint print arguments so that they match the print format. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: d2f82254 ("mmc: core: Add members to mmc_request and mmc_data for CQE's") Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by:
-
Takashi Iwai authored
commit e40bdb03 upstream. Some HP laptops have a mute mute LED controlled by a pin VREF. The Realtek codec driver updates the VREF via vmaster hook by calling snd_hda_set_pin_ctl_cache(). This works fine as long as the driver is running in a normal mode. However, when the VREF change happens during the codec being in runtime PM suspend, the regmap access will skip and postpone the actual register change. This ends up with the unchanged LED status until the next runtime PM resume even if you change the Master mute switch. (Interestingly, the machine keeps the LED status even after the codec goes into D3 -- but it's another story.) For improving this usability, let the driver temporarily powering up / down only during the pin VREF change. This can be achieved easily by wrapping the call with snd_hda_power_up_pm() / *_down_pm(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199073 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kailang Yang authored
commit f0ba9d69 upstream. This platform was hardware fixed type for CTIA type for headset port. Assigned 0x19 verb will fix can't record issue. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kailang Yang authored
commit 88d42b2b upstream. It will have a chance speaker no sound after system resume. To toggle NID 0x53 index 0x2 bit 15 will solve this issue. This usage will also suitable with ALC256. Fixes: 4a219ef8 ("ALSA: hda/realtek - Add ALC256 HP depop function") Signed-off-by:
-
Takashi Iwai authored
commit a8d7bde2 upstream. We've observed too long probe time with Coffee Lake (CFL) machines, and the likely cause is some communication problem between the HD-audio controller and the codec chips. While the controller expects an IRQ wakeup for each codec response, it seems sometimes missing, and it takes one second for the controller driver to time out and read the response in the polling mode. Although we aren't sure about the real culprit yet, in this patch, we put a workaround by forcing the polling mode as default for CFL machines; the polling mode itself isn't too heavy, and much better than other workarounds initially suggested (e.g. disabling power-save), at least. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199007 Fixes: e79b0006 ("ALSA: hda - Add Coffelake PCI ID") Reported-and-tested-by:
Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 8e6b1a72 upstream. In loopback_open() and loopback_close(), we assign and release the substream object to the corresponding cable in a racy way. It's neither locked nor done in the right position. The open callback assigns the substream before its preparation finishes, hence the other side of the cable may pick it up, which may lead to the invalid memory access. This patch addresses these: move the assignment to the end of the open callback, and wrap with cable->lock for avoiding concurrent accesses. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 67a01afa upstream. The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources. A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running. The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger). For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kirill Marinushkin authored
commit a6618f4a upstream. Currently, the offsets in the UAC2 processing unit descriptor are calculated incorrectly. It causes an issue when connecting the device which provides such a feature: ~~~~ [84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18) ~~~~ After this patch is applied, the UAC2 processing unit inits w/o this error. Fixes: 23caaf19 ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by:
Kirill Marinushkin <k.marinushkin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 3c3e4b3a upstream. The meson_sar_adc_lock() function is not supposed to hold the "indio_dev->mlock" on the error path. Fixes: 3adbf342 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Michael Nosthoff authored
commit 8b438686 upstream. Commit 7383d44b added a pointer pdata which get set to the default platform_data when non was defined in the device. But it did not pass this pointer to the st_sensors_init_sensor call but still used the maybe uninitialized platform_data from dev. This breaks initialization when no platform_data is given and the optional st,drdy-int-pin devicetree option is not set. This commit fixes this. Cc: stable@vger.kernel.org Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly") Signed-off-by:
Michael Nosthoff <committed@heine.so> Signed-off-by:
-
Richard Lai authored
commit b91e146c upstream. CCS811 has different I2C register maps in boot and application mode. When CCS811 is in boot mode, register APP_START (0xF4) is used to transit the firmware state from boot to application mode. However, APP_START is not a valid register location when CCS811 is in application mode (refer to "CCS811 Bootloader Register Map" and "CCS811 Application Register Map" in CCS811 datasheet). The driver should not attempt to perform a write to APP_START while CCS811 is in application mode, as this is not a valid or documented register location. When prob function is being called, the driver assumes the CCS811 sensor is in boot mode, and attempts to perform a write to APP_START. Although CCS811 powers-up in boot mode, it may have already been transited to application mode by previous instances, e.g. unload and reload device driver by the system, or explicitly by user. Depending on the system design, CCS811 sensor may be permanently connected to system power source rather than power controlled by GPIO, hence it is possible that the sensor is never power reset, thus the firmware could be in either boot or application mode at any given time when driver prob function is being called. This patch checks the STATUS register before attempting to send a write to APP_START. Only if the firmware is not in application mode and has valid firmware application loaded, then it will continue to start transiting the firmware boot to application mode. Signed-off-by:
Richard Lai <richard@richardman.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Mathias Kresin authored
commit a821328c upstream. Enable syscon to use it for the RCU MFD on Amazon SE as well. The Amazon SE also has similar reset controller system as Danube and XWAY and use their drivers mostly. As these drivers now need syscon also activate the syscon subsystem for for Amazon SE. Fixes: 2b6639d4 ("MIPS: lantiq: Enable MFD_SYSCON to be able to use it for the RCU MFD") Signed-off-by:
Mathias Kresin <dev@kresin.me> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.14+ Patchwork: https://patchwork.linux-mips.org/patch/18817/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Mathias Kresin authored
commit 3223a5a7 upstream. On Danube and AR9 the USB core is connected though a AHB bus to the main system cross bar, hence we need to enable the gating clock of the AHB Bus as well to make the USB controller work. Fixes: dea54fba ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module") Signed-off-by:
-
Mathias Kresin authored
commit 214cbc14 upstream. On Danube the USB0 controller registers are at 1e101000 and the USB0 PHY register is at 1f203018 similar to all other lantiq SoCs. Activate the USB controller gating clock thorough the USB controller driver and not the PHY. This fixes a problem introduced in a previous commit. Fixes: dea54fba ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module") Signed-off-by:
-
NeilBrown authored
commit a63d706e upstream. Since commit 3af5a67c ("MIPS: Fix early CM probing") the MT7621 has not been able to boot. This commit caused mips_cm_probe() to be called before mt7621.c::proc_soc_init(). prom_soc_init() has a comment explaining that mips_cm_probe() "wipes out the bootloader config" and means that configuration registers are no longer available. It has some code to re-enable this config. Before this re-enable code is run, the sysc register cannot be read, so when SYSC_REG_CHIP_NAME0 is read, a garbage value is returned and panic() is called. If we move the config-repair code to the top of prom_soc_init(), the registers can be read and boot can proceed. Very occasionally, the first register read after the reconfiguration returns garbage, so add a call to __sync(). Fixes: 3af5a67c ("MIPS: Fix early CM probing") Signed-off-by:
NeilBrown <neil@brown.name> Reviewed-by:
Matt Redfearn <matt.redfearn@mips.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.5+ Patchwork: https://patchwork.linux-mips.org/patch/18859/Signed-off-by:
-
NeilBrown authored
commit 891731f6 upstream. ralink_halt() does nothing that machine_halt() doesn't already do, so it adds no value. It actually causes incorrect behaviour due to the "unreachable()" at the end. This tells the compiler that the end of the function will never be reached, which isn't true. The compiler responds by not adding a 'return' instruction, so control simply moves on to whatever bytes come afterwards in memory. In my tested, that was the ralink_restart() function. This means that an attempt to 'halt' the machine would actually cause a reboot. So remove ralink_halt() so that a 'halt' really does halt. Fixes: c06e836a ("MIPS: ralink: adds reset code") Signed-off-by:
-
