Since the expires of the DST_NOCACHE rt can be set during
the ip6_rt_update_pmtu(), we also need to consider the expires
value when doing ip6_dst_check().

This patches creates __rt6_check_expired() to only
check the expire value (if one exists) of the current rt.

In rt6_dst_from_check(), it adds __rt6_check_expired() as
one of the condition check.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The original bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=1272571

The setup has a IPv4 GRE tunnel running in a IPSec.  The bug
happens when ndisc starts sending router solicitation at the gre
interface.  The simplified oops stack is like:

__lock_acquire+0x1b2/0x1c30
lock_acquire+0xb9/0x140
_raw_write_lock_bh+0x3f/0x50
__ip6_ins_rt+0x2e/0x60
ip6_ins_rt+0x49/0x50
~~~~~~~~
__ip6_rt_update_pmtu.part.54+0x145/0x250
ip6_rt_update_pmtu+0x2e/0x40
~~~~~~~~
ip_tunnel_xmit+0x1f1/0xf40
__gre_xmit+0x7a/0x90
ipgre_xmit+0x15a/0x220
dev_hard_start_xmit+0x2bd/0x480
__dev_queue_xmit+0x696/0x730
dev_queue_xmit+0x10/0x20
neigh_direct_output+0x11/0x20
ip6_finish_output2+0x21f/0x770
ip6_finish_output+0xa7/0x1d0
ip6_output+0x56/0x190
~~~~~~~~
ndisc_send_skb+0x1d9/0x400
ndisc_send_rs+0x88/0xc0
~~~~~~~~

The rt passed to ip6_rt_update_pmtu() is created by
icmp6_dst_alloc() and it is not managed by the fib6 tree,
so its rt6i_table == NULL.  When __ip6_rt_update_pmtu() creates
a RTF_CACHE clone, the newly created clone also has rt6i_table == NULL
and it causes the ip6_ins_rt() oops.

During pmtu update, we only want to create a RTF_CACHE clone
from a rt which is currently managed (or owned) by the
fib6 tree.  It means either rt->rt6i_node != NULL or
rt is a RTF_PCPU clone.

It is worth to note that rt6i_table may not be NULL even it is
not (yet) managed by the fib6 tree (e.g. addrconf_dst_alloc()).
Hence, rt6i_node is a better check instead of rt6i_table.

Fixes: 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reported-by: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu>
Cc: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

minor change, indenting is one tab out.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During splicing an af-unix socket to a pipe we have to drop all
af-unix socket locks. While doing so we allow another reader to enter
unix_stream_read_generic which can read, copy and finally free another
skb. If exactly this skb is just in process of being spliced we get a
use-after-free report by kasan.

First, we must make sure to not have a free while the skb is used during
the splice operation. We simply increment its use counter before unlocking
the reader lock.

Stream sockets have the nice characteristic that we don't care about
zero length writes and they never reach the peer socket's queue. That
said, we can take the UNIXCB.consumed field as the indicator if the
skb was already freed from the socket's receive queue. If the skb was
fully consumed after we locked the reader side again we know it has been
dropped by a second reader. We indicate a short read to user space and
abort the current splice operation.

This bug has been found with syzkaller
(http://github.com/google/syzkaller) by Dmitry Vyukov.

Fixes: 2b514574 ("net: af_unix: implement splice for stream af_unix sockets")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Building dwmac-ipq806x on a 64-bit architecture produces a harmless
warning from gcc:

stmmac/dwmac-ipq806x.c: In function 'ipq806x_gmac_probe':
include/linux/bitops.h:6:19: warning: overflow in implicit constant conversion [-Woverflow]
  val = QSGMII_PHY_CDR_EN |
stmmac/dwmac-ipq806x.c:333:8: note: in expansion of macro 'QSGMII_PHY_CDR_EN'
 #define QSGMII_PHY_CDR_EN   BIT(0)
 #define BIT(nr)   (1UL << (nr))

This is a result of the type conversion rules in C, when we take the
logical OR of multiple different types. In particular, we have
and unsigned long

	QSGMII_PHY_CDR_EN == BIT(0) == (1ul << 0) == 0x0000000000000001ul

and a signed int

	0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET == 0xc0000000

which together gives a signed long value

	0xffffffffc0000001l

and when this is passed into a function that takes an unsigned int type,
gcc warns about the signed overflow and the loss of the upper 32-bits that
are all ones.

This patch adds 'ul' type modifiers to the literal numbers passed in
here, so now the expression remains an 'unsigned long' with the upper
bits all zero, and that avoids the signed overflow and the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: b1c17215 ("stmmac: add ipq806x glue layer")
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree. This
large batch that includes fixes for ipset, netfilter ingress, nf_tables
dynamic set instantiation and a longstanding Kconfig dependency problem.
More specifically, they are:

1) Add missing check for empty hook list at the ingress hook, from
   Florian Westphal.

2) Input and output interface are swapped at the ingress hook,
   reported by Patrick McHardy.

3) Resolve ipset extension alignment issues on ARM, patch from Jozsef
   Kadlecsik.

4) Fix bit check on bitmap in ipset hash type, also from Jozsef.

5) Release buckets when all entries have expired in ipset hash type,
   again from Jozsef.

6) Oneliner to initialize conntrack tuple object in the PPTP helper,
   otherwise the conntrack lookup may fail due to random bits in the
   structure holes, patch from Anthony Lineham.

7) Silence a bogus gcc warning in nfnetlink_log, from Arnd Bergmann.

8) Fix Kconfig dependency problems with TPROXY, socket and dup, also
   from Arnd.

9) Add __netdev_alloc_pcpu_stats() to allow creating percpu counters
   from atomic context, this is required by the follow up fix for
   nf_tables.

10) Fix crash from the dynamic set expression, we have to add new clone
    operation that should be defined when a simple memcpy is not enough.
    This resolves a crash when using per-cpu counters with new Patrick
    McHardy's flow table nft support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: d7d2d89d ("r8169: Add software counter for multicast packages")
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge final patch-bomb from Andrew Morton:
 "Various leftovers, mainly Christoph's pci_dma_supported() removals"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  pci: remove pci_dma_supported
  usbnet: remove ifdefed out call to dma_supported
  kaweth: remove ifdefed out call to dma_supported
  sfc: don't call dma_supported
  nouveau: don't call pci_dma_supported
  netup_unidvb: use pci_set_dma_mask insted of pci_dma_supported
  cx23885: use pci_set_dma_mask insted of pci_dma_supported
  cx25821: use pci_set_dma_mask insted of pci_dma_supported
  cx88: use pci_set_dma_mask insted of pci_dma_supported
  saa7134: use pci_set_dma_mask insted of pci_dma_supported
  saa7164: use pci_set_dma_mask insted of pci_dma_supported
  tw68-core: use pci_set_dma_mask insted of pci_dma_supported
  pcnet32: use pci_set_dma_mask insted of pci_dma_supported
  lib/string.c: add ULL suffix to the constant definition
  hugetlb: trivial comment fix
  selftests/mlock2: add ULL suffix to 64-bit constants
  selftests/mlock2: add missing #define _GNU_SOURCE

Pull misc kbuild updates from Michal Marek:
 "This is the non-critical part of kbuild:

   - several coccinelle updates
   - make deb-pkg creates an armhf package if CONFIG_VFP=y
   - make tags understands some more powerpc macros"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  coccinelle: Improve checking for missing NULL terminators
  coccinelle: ifnullfree: handle various destroy functions
  coccinelle: ifnullfree: various cleanups
  cocinelle: iterators: semantic patch to delete unneeded of_node_put
  deb-pkg: Add automatic support for armhf architecture
  scripts/coccinelle: fix typos
  coccinelle: misc: remove "complex return code" warnings
  Coccinelle: fix incorrect -include option transformation
  coccinelle: tests: improve odd_ptr_err.cocci
  coccinelle: misc: move constants to the right
  scripts/tags.sh: Teach tags about some powerpc macros

Pull kconfig updates from Michal Marek:

 - 'make xconfig' ported to Qt5, dropping support for Qt3

 - merge_config.sh supports a single-input-file mode and also respects
   $KCONFIG_CONFIG

 - Fix for incorrect display of >= and > in dependency expressions

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (44 commits)
  Add current selection check.
  Use pkg-config to find Qt 4 and 5 instead of direct qmake
  kconfig: Fix copy&paste error
  kconfig/merge_config.sh: Accept a single file
  kconfig/merge_config.sh: Support KCONFIG_CONFIG
  Update the buildsystem for KConfig finding Qt
  Port xconfig to Qt5 - Update copyright.
  Port xconfig to Qt5 - Fix goParent issue.
  Port xconfig to Qt5 - on Back clicked, deselect old item.
  Port xconfig to Qt5 - Add(back) one click checkbox toggle.
  Port xconfig to Qt5 - Add(back) lineedit editing.
  Port xconfig to Qt5 - Remove some commented code.
  Port xconfig to Qt5 - Source format.
  Port xconfig to Qt5 - Add horizontal scrollbar, and scroll per pixel.
  Port xconfig to Qt5 - Change ConfigItem constructor parent type.
  Port xconfig to Qt5 - Disable ConfigList soring
  Port xconfig to Qt5 - Remove ConfigList::updateMenuList template.
  Port xconfig to Qt5 - Add ConfigList::mode to initializer list.
  Port xconfig to Qt5 - Add ConfigItem::nextItem to initializer list.
  Port xconfig to Qt5 - Tree widget set column titles.
  ...

Pull kbuild update from Michal Marek:
 "The kbuild branch for v4.4-rc1 only has one commit: A new make
  kselftest-clean target cleans tools/testing/selftests"

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kselftest: add kselftest-clean rule

Merge tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This 12 patch update for 4.4-rc1 consists of a new pstore test and
  fixes to existing tests"

* tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: breakpoint: Actually build it
  selftests: vm: Try harder to allocate huge pages
  selftests: Make scripts executable
  selftests: kprobe: Choose an always-defined function to probe
  selftests: memfd: Stop unnecessary rebuilds
  selftests: Add missing #include directives
  selftests/seccomp: Be more precise with syscall arguments.
  selftests/seccomp: build and pass on arm64
  selftests: memfd_test: Revised STACK_SIZE to make it 16-byte aligned
  selftests/pstore: add pstore test scripts going with reboot
  selftests/pstore: add pstore test script for pre-reboot
  selftests: add .gitignore for efivarfs

Pull drm fixes from Dave Airlie:
 "Two build fixes, one for VC4, one for nouveau where the ARM only code
  is doing something a bit strange.  While people are discussing that,
  just workaround it and fix the build for now.  The code in question
  will never get used on anything non-ARM anyways.

  Also one fix for AST that SuSE had been hiding in their kernel, that
  allows all fbdev apps to work on that driver"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: fix build failures on all non ARM.
  drm/ast: Initialized data needed to map fbdev memory
  drm/vc4: Add dependency on HAVE_DMA_ATTRS, and select DRM_GEM_CMA_HELPER

gk20a is an ARM only GPU, so we can just do the correct thing on
ARM but fail on other architectures. The other option was to use
SWIOTLB as the define, which means phys_to_page exists, but
this seems clearer.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Due to a missing initialization there was no way to map fbdev memory.
Thus for example using the Xserver with the fbdev driver failed.
This fix adds initialization for fix.smem_start and fix.smem_len
in the fb_info structure, which fixes this problem.
Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@vger.kernel.org
Signed-off-by: Egbert Eich <eich@suse.de>
[pulled from SuSE tree by me - airlied]
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull networking fixes from David Miller:

 1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet.

 2) Several spots need to get to the original listner for SYN-ACK
    packets, most spots got this ok but some were not.  Whilst covering
    the remaining cases, create a helper to do this.  From Eric Dumazet.

 3) Missiing check of return value from alloc_netdev() in CAIF SPI code,
    from Rasmus Villemoes.

 4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich.

 5) Use after free in mvneta driver, from Justin Maggard.

 6) Fix race on dst->flags access in dst_release(), from Eric Dumazet.

 7) Add missing ZLIB_INFLATE dependency for new qed driver.  From Arnd
    Bergmann.

 8) Fix multicast getsockopt deadlock, from WANG Cong.

 9) Fix deadlock in btusb, from Kuba Pawlak.

10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6
    counter state.  From Sabrina Dubroca.

11) Fix packet_bind() race, which can cause lost notifications, from
    Francesco Ruggeri.

12) Fix MAC restoration in qlcnic driver during bonding mode changes,
    from Jarod Wilson.

13) Revert bridging forward delay change which broke libvirt and other
    userspace things, from Vlad Yasevich.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
  Revert "bridge: Allow forward delay to be cfgd when STP enabled"
  bpf_trace: Make dependent on PERF_EVENTS
  qed: select ZLIB_INFLATE
  net: fix a race in dst_release()
  net: mvneta: Fix memory use after free.
  net: Documentation: Fix default value tcp_limit_output_bytes
  macvtap: Resolve possible __might_sleep warning in macvtap_do_read()
  mvneta: add FIXED_PHY dependency
  net: caif: check return value of alloc_netdev
  net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA
  drivers: net: xgene: fix RGMII 10/100Mb mode
  netfilter: nft_meta: use skb_to_full_sk() helper
  net_sched: em_meta: use skb_to_full_sk() helper
  sched: cls_flow: use skb_to_full_sk() helper
  netfilter: xt_owner: use skb_to_full_sk() helper
  smack: use skb_to_full_sk() helper
  net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid()
  bpf: doc: correct arch list for supported eBPF JIT
  dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put"
  bonding: fix panic on non-ARPHRD_ETHER enslave failure
  ...

Pull block IO poll support from Jens Axboe:
 "Various groups have been doing experimentation around IO polling for
  (really) fast devices.  The code has been reviewed and has been
  sitting on the side for a few releases, but this is now good enough
  for coordinated benchmarking and further experimentation.

  Currently O_DIRECT sync read/write are supported.  A framework is in
  the works that allows scalable stats tracking so we can auto-tune
  this.  And we'll add libaio support as well soon.  Fow now, it's an
  opt-in feature for test purposes"

* 'for-4.4/io-poll' of git://git.kernel.dk/linux-block:
  direct-io: be sure to assign dio->bio_bdev for both paths
  directio: add block polling support
  NVMe: add blk polling support
  block: add block polling support
  blk-mq: return tag/queue combo in the make_request_fn handlers
  block: change ->make_request_fn() and users to return a queue cookie

Pull UBI/UBIFS updates from Richard Weinberger:

 - access time support for UBIFS by Dongsheng Yang

 - random cleanups and bug fixes all over the place

* tag 'upstream-4.4-rc1' of git://git.infradead.org/linux-ubifs:
  ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs
  ubifs: make ubifs_[get|set]xattr atomic
  UBIFS: Delete unnecessary checks before the function call "iput"
  UBI: Remove in vain semicolon
  UBI: Fastmap: Fix PEB array type
  UBIFS: Fix possible memory leak in ubifs_readdir()
  fs/ubifs: remove unnecessary new_valid_dev check
  ubi: fastmap: Implement produce_free_peb()
  UBIFS: print verbose message when rescanning a corrupted node
  UBIFS: call dbg_is_power_cut() instead of reading c->dbg->pc_happened
  UBI: drop null test before destroy functions
  UBI: Update comments to reflect UBI_METAONLY flag
  UBI: Fix debug message
  UBI: Fix typo in comment
  UBI: Fastmap: Simplify expression
  UBIFS: fix a typo in comment of ubifs_budget_req
  UBIFS: use kmemdup rather than duplicating its implementation

Pull UML updates from Richard Weinberger:

 - a new hrtimer based clocksource by Anton Ivanov

 - ptrace() enhancments by Richard Weinberger

 - random cleanups and bug fixes all over the place

* 'for-linus-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Switch clocksource to hrtimers
  um: net: replace GFP_KERNEL with GFP_ATOMIC when spinlock is held
  um: Report host OOM more nicely
  um: Simplify STUB_DATA loading
  um: Remove dead symbol from i386 syscall stub
  um: Remove dead code from x86_64 syscall stub
  um: Get rid of open coded NR_SYSCALLS
  um: Store syscall number after syscall_trace_enter()
  um: Define PTRACE_OLDSETOPTIONS

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma_set_mask already checks for a supported DMA mask before updating it,
the call to dma_supported is redundant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Shradha Shah <sshah@solarflare.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Just try to set a 64-bit DMA mask first and retry with the smaller dma_mask
if dma_set_mask failed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Sergey Kozlov <serjk@netup.ru>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All drivers should be using dma_set_mask / pci_set_dma_mask to try to
set the dma mask instead of just querying it.  Without that some iommu
implementations may not work.

pci_dma_supported is removed entirely, but dma_supported stays for
dma_ops implementations for now.

This patch (of 15):

This ensures the dma mask that is supported by the driver is recorded
in the device structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Don Fry <pcnet32@frontier.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Helge Deller <deller@gmx.de>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sergey Kozlov <serjk@netup.ru>
Cc: Shradha Shah <sshah@solarflare.com>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Steven Toth <stoth@kernellabs.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8-byte constant is too big for long and compiler complains about this.

  lib/string.c:907:20: warning: constant 0x0101010101010101 is so big it is long

Append ULL suffix to explicitly show its type.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Recently alloc_buddy_huge_page() was renamed to __alloc_buddy_huge_page(),
so let's sync comments.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On 32-bit (e.g. m68k):

    mlock2-tests.c: In function 'lock_check':
    mlock2-tests.c:293: warning: integer constant is too large for 'long' type
    mlock2-tests.c:294: warning: integer constant is too large for 'long' type
    mlock2-tests.c:299: warning: integer constant is too large for 'long' type
    ...
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Eric B Munson <emunson@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On glibc 2.3.6:

    mlock2-tests.c: In function 'seek_to_smaps_entry':
    mlock2-tests.c:158: warning: implicit declaration of function 'getline'

According to the manpage of getline(), it needs _GNU_SOURCE before glibc
2.10.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Eric B Munson <emunson@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull metag arch updates from James Hogan:
 "A fix for 4KiB stacks with SMP, and a change of maintenance status to
  'Odd Fixes'"

* tag 'metag-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  MAINTAINERS: Change Meta arch port status to Odd Fixes
  metag: Turn irq_ctx_* macros into static inlines
  metag: SMP: Fix 4KiB stack setup on secondary CPUs

Pull ARM SoC defconfig updates from Olof Johansson:
 "Defconfig updates are kept separate from other branches mostly to
  avoid conflicts between the different categories (driver branch
  enabling something that has context conflict with SoC options, etc).

  A lot of this again is scattered across the various hardware
  platforms.  multi_v7_defconfig, our "generic" config for most 32-bit
  platforms has been gone through by Marvell Berlin maintainers and
  added most options they need to run on their hardware.  Broadcom NSP
  is also added there, and the new Atmel SAMA5D2 (added last release).
  Rockchip also has display and other devices supported in that config.

  In addition to that, the usual small churn of new options being added
  here and there"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  ARM: multi_v7_defconfig: enable UniPhier I2C drivers
  ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
  ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
  ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-in
  ARM: exynos_defconfig: Disable simplefb support
  ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4
  ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget
  ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget
  ARM: exynos_defconfig: Enable USB Video Class support
  ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin
  ARM: tegra: Update multi_v7_defconfig
  ARM: multi_v7_defconfig: Add Atmel SDHCI device
  ARM: multi_v7_defconfig: Add Atmel Flexcom device
  ARM: multi_v7_defconfig: Add Atmel SAMA5D2 SoC
  ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfig
  ARM: at91/defconfig: update at91_dt defconfig
  ARM: at91/defconfig: update sama5 defconfig
  ARM: configs: Enable FIXED_PHY in multi_v7 defconfig
  ARM: configs: update lpc18xx defconfig
  ARM: socfpga_defconfig: enable fpga manager
  ...

Pull ARM DT updates from Olof Johansson:
 "As usual, this is the massive branch we have for each release.  Lots
  of various updates and additions of hardware descriptions on existing
  hardware, as well as the usual additions of new boards and SoCs.

  This is also the first release where we've started mixing 64- and
  32-bit DT updates in one branch.

  (Specific details on what's actually here and new is pretty easy to
  tell from the diffstat, so there's little point in duplicating listing
  it here)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits)
  ARM: dts: uniphier: add system-bus-controller nodes
  ARM64: juno: disable NOR flash node by default
  ARM: dts: uniphier: add outer cache controller nodes
  arm64: defconfig: Enable PCI generic host bridge by default
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
  ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
  dts/Makefile: Add build support for LS2080a QDS & RDB board DTS
  dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards
  dts/ls2080a: Update Simulator DTS to add support of various peripherals
  dts/ls2080a: Remove text about writing to Free Software Foundation
  dts/ls2080a: Update DTSI to add support of various peripherals
  doc: DTS: Update DWC3 binding to provide reference to generic bindings
  doc/bindings: Update GPIO devicetree binding documentation for LS2080A
  Documentation/dts: Move FSL board-specific bindings out of /powerpc
  Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
  arm64: Rename FSL LS2085A SoC support code to LS2080A
  arm64: Use generic Layerscape SoC family naming
  ARM: dts: uniphier: add ProXstream2 Vodka board support
  ARM: dts: uniphier: add ProXstream2 Gentil board support
  ...

Pull ARM SoC driver updates from Olof Johansson:
 "As we've enabled multiplatform kernels on ARM, and greatly done away
  with the contents under arch/arm/mach-*, there's still need for
  SoC-related drivers to go somewhere.

  Many of them go in through other driver trees, but we still have
  drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
  that might be shared between ARM and ARM64 (or just in general makes
  sense to not have under the architecture directory).

  This branch contains mostly such code:

   - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
     communicate with power management blocks on these SoCs for use by
     clock, regulator and bus frequency drivers.

   - Allwinner Reduced Serial Bus driver, again used to communicate with
     PMICs.

   - Drivers for ARM's SCPI (System Control Processor).  Not to be
     confused with PSCI (Power State Coordination Interface).  SCPI is
     used to communicate with the assistant embedded cores doing power
     management, and we have yet to see how many of them will implement
     this for their hardware vs abstracting in other ways (or not at all
     like in the past).

   - To make confusion between SCPI and PSCI more likely, this release
     also includes an update of PSCI to interface version 1.0.

   - Rockchip support for power domains.

   - A driver to talk to the firmware on Raspberry Pi"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  soc: qcom: smd-rpm: Correct size of outgoing message
  bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
  bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
  ARM: bcm2835: add mutual inclusion protection
  drivers: psci: make PSCI 1.0 functions initialization version dependent
  dt-bindings: Correct paths in Rockchip power domains binding document
  soc: rockchip: power-domain: don't try to print the clock name in error case
  soc: qcom/smem: add HWSPINLOCK dependency
  clk: berlin: add cpuclk
  ARM: berlin: dts: add CLKID_CPU for BG2Q
  ARM: bcm2835: Add the Raspberry Pi firmware driver
  soc: qcom: smem: Move RPM message ram out of smem DT node
  soc: qcom: smd-rpm: Correct the active vs sleep state flagging
  soc: qcom: smd: delete unneeded of_node_put
  firmware: qcom-scm: build for correct architecture level
  soc: qcom: smd: Correct SMEM items for upper channels
  qcom-scm: add missing prototype for qcom_scm_is_available()
  qcom-scm: fix endianess issue in __qcom_scm_is_call_available
  soc: qcom: smd: Reject send of too big packets
  soc: qcom: smd: Handle big endian CPUs
  ...