- 19 Feb, 2019 40 commits
-
-
Tomislav Požega authored
Register 66 was causing issues on RT6352 if set to the same value as in MTK driver. With 1c reg value device was working fine in both HT20 and HT40 modes. Signed-off-by:
Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Tomislav Požega authored
Remove band check from rf53xx channel config routine since all chips using it are single band. Signed-off-by:
-
Dan Carpenter authored
The parameter order for clamp is supposed to be clamp(value, low, high). When we write it in this order it's equivalent to min(head->plcp[3] & 0x7f, 75) which works in this context where the min is zero. But it's not a correct use of the API. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c: In function 'rtl8180_probe': drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c:1727:15: warning: variable 'io_addr' set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c:1726:16: warning: variable 'mem_addr' set but not used [-Wunused-but-set-variable] They're never used since introduction. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Keyur Patel authored
Replace hard coded function name with __func__, to improve robustness and to conform to the Linux kernel coding style. Issue found using checkpatch. Signed-off-by:
Keyur Patel <iamkeyur96@gmail.com> Signed-off-by:
-
Brian Norris authored
As it is, doing something like # iw phy phy0 interface add foobar type ibss on a firmware that doesn't have ad-hoc support just yields failures of HostCmd_CMD_SET_BSS_MODE, which happened to return a '-1' error code (-EPERM? not really right...) and sometimes may even crash the firmware along the way. Let's parse the firmware capability flag while registering the wiphy, so we don't allow attempting IBSS at all, and we get a proper -EOPNOTSUPP from nl80211 instead. Fixes: e267e71e ("mwifiex: Disable adhoc feature based on firmware capability") Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Adrian Bunk authored
NL80211_TX_POWER_LIMITED was treated as NL80211_TX_POWER_AUTOMATIC, which is the opposite of what should happen and can cause nasty regulatory problems. if/else converted to a switch without default to make gcc warn on unhandled enum values. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/marvell/libertas_tf/main.c: In function 'lbtf_rx': drivers/net/wireless/marvell/libertas_tf/main.c:554:15: warning: variable 'flags' set but not used [-Wunused-but-set-variable] It never used and can be removed. Signed-off-by:
Steve deRosier <derosier@cal-sierra.com> Signed-off-by:
-
Lubomir Rintel authored
Instead of exposing the signal-to-noise ration, calculate the actual signal level taking the noise floor into account. Also, flip the SIGNAL_DBM bit on, so that mac80211 exposes the signal level along with the station info in scan results. This fills NetworkManager's "nmcli d wifi output" output with colors, bars and joy. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Reviewed-by:
-
Lubomir Rintel authored
Also, turn it to a dev_info() to make checkpatch.pl happy. Signed-off-by:
-
Lubomir Rintel authored
It doesn't make sense and the USB core warns on each submit of such URB, easily flooding the message buffer with tracebacks. Analogous issue was fixed in regular libertas driver in commit 6528d880 ("libertas: don't set URB_ZERO_PACKET on IN USB transfer"). Cc: stable@vger.kernel.org Signed-off-by:
-
Lubomir Rintel authored
Logging each and every command response is way too much for INFO level. Silence this, unless CONFIG_LIBERTAS_THINFIRM_DEBUG has been enabled. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/rsi/rsi_91x_main.c: In function 'rsi_prepare_skb': drivers/net/wireless/rsi/rsi_91x_main.c:127:24: warning: variable 'vif' set but not used [-Wunused-but-set-variable] drivers/net/wireless/rsi/rsi_91x_main.c:124:28: warning: variable 'info' set but not used [-Wunused-but-set-variable] They're not used any more since 160ee2a1 ("rsi: fill rx_params only once.") Signed-off-by:
-
Siva Rebbagondla authored
Trivial fixes to spelling mistakes in various files in rsi folder. Signed-off-by:
Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by:
-
Dan Carpenter authored
There is a \b (backspace) character in the message that wasn't intended. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c: In function 'brcmf_usb_state_change': drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:578:6: warning: variable 'old_state' set but not used [-Wunused-but-set-variable] It's never used and can be removed. Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Rafał Miłecki authored
This macro will be used in more places not just the cfg80211.c. It makes sense to pass some common struct to it as "struct wiphy" is mostly referenced in cfg80211 code only. A very common one (used above the bus abstraction layer) is struct brcmf_pub. Many functions already keep reference to it which will make using bphy_err() simpler. It should also allow extending that macro's logic if it's ever needed. This improves code recently added in the commit 3ef005b8 ("brcmfmac: add bphy_err() and use it in the cfg80211.c"). Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
Rafał Miłecki authored
So far 160 MHz channels were treated as 20 MHz ones which was breaking support for 40/80 MHz due to the brcmf_construct_chaninfo() logic and its assumptions. Signed-off-by:
-
Rafał Miłecki authored
1) Use switch to simplify/improve the code & avoid some duplication 2) Add warning for unsupported values Signed-off-by:
-
Rafał Miłecki authored
Firmware is capable of reporting ring status. It's used e.g. to signal some problem with a specific ring setup. This patch adds support for printing ring & error number which may be useful for debugging setup issues. Signed-off-by:
-
Arend van Spriel authored
The local variable chipname is string representation of chip id and revision which is printed in the good flow of brcmf_fw_alloc_request(). Also use it for the error path, ie. for unknown/unsupported devices. Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
When the firmware crashes during the probe sequence we provide little information on what really failed. This patch checks the sdpcm shared location and show the trap information if a firmware trap has happened. Reviewed-by:
-
Arend van Spriel authored
The MBSS feature was already disabled for bcm43362 as it resulted in a beacon with BRCM_TEST_SSID regardless user configuration in hostapd. Now the same has been reported for bcm4330 so disable the feature for this device as well. Reported-by:
Russell King <linux@armlinux.org.uk> Tested-by:
Christopher Martin <chrsmrtn@gmail.com> Reviewed-by:
-
Arend van Spriel authored
Since we moved the drivers debugfs directory under ieee80211 debugfs the debugfs entries need to be added after wiphy_register() has been called. For most part that has been done accordingly, but for the debugfs entries added by SDIO it was not and failed silently. This patch fixes that by adding a bus-layer callback for it. Fixes: 856d5a01 ("brcmfmac: allocate struct brcmf_pub instance using wiphy_new()") Reported-by:
-
Arend van Spriel authored
For USB there is no separate channel being used to pass events from firmware to the host driver and as such are passed over the data path. In order to detect mock event messages an additional check is needed on event subtype. This check is added conditionally using unlikely() keyword. Reviewed-by:
-
Arend van Spriel authored
The SSID length as received from firmware should not exceed IEEE80211_MAX_SSID_LEN as that would result in heap overflow. Reviewed-by:
-
Larry Finger authored
If a macro is in CamelCase, it it converted to upper case. Variables and routine names are converted to lower case. The following checkpatch exceptions are also fixed: WARNING: line over 80 characters #316: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c:1751: + SET_8821AE_H2CCMD_AOAC_RSVDPAGE_LOC_GTK_EXT_MEM(u1rsvdpageloc2, GTKEXT_PG); CHECK: spaces preferred around that '+' (ctx:VxV) #357: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:2591: + (eeaddr+1), hwinfo[eeaddr+1]); ^ CHECK: spaces preferred around that '+' (ctx:VxV) #357: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:2591: + (eeaddr+1), hwinfo[eeaddr+1]); ^ CHECK: spaces preferred around that '+' (ctx:VxV) #358: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:2592: + if (0xFF == hwinfo[eeaddr+1]) /*YJ,add,120316*/ ^ WARNING: Comparisons should place the constant on the right side of the test #358: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:2592: + if (0xFF == hwinfo[eeaddr+1]) /*YJ,add,120316*/ CHECK: spaces preferred around that '&' (ctx:VxV) #501: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c:2666: + pwrinfo24g->bw40_diff[rfpath][txcount] = (hwinfo[eeaddr]&0xf0) >> 4; ^ Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by:Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
If a macro is in CamelCase, it it converted to upper case. Variables and routine names are converted to lower case. Signed-off-by:
-
Larry Finger authored
If a macro is in CamelCase, it it converted to upper case. Variables and routine names are converted to lower case. Signed-off-by:
-
Larry Finger authored
If a macro is in CamelCase, it it converted to upper case. Variables and routine names are converted to lower case. The following checkpatch exceptions are also fixed: CHECK: No space is necessary after a cast #211: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:109: + (u8 *) (&rfstate)); CHECK: No space is necessary after a cast #241: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c:277: + ptmp_byte = (u8 *) (®toset) + index; Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by:
-
Larry Finger authored
This patch affects modules rtl8192ce, rtl8192cu, and rtl8192com. The following checkpatch exceptions are also fixed: CHECK: No space is necessary after a cast #237: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/hw.c:90: + (u8 *) (&rfstate)); CHECK: No space is necessary after a cast #744: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c:329: + pwr_val[i] = (u8) ((writeval & (0x7f << CHECK: No space is necessary after a cast #784: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rf.c:365: + (u8) writeval); CHECK: spaces preferred around that '/' (ctx:VxV) #963: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:513: + txqpageunit = txqpagenum/outepnum; ^ CHECK: Unnecessary parentheses around 'outepnum > 1' #975: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:521: + if ((outepnum > 1) && (txqremaininpage)) CHECK: Alignment should match open parenthesis #1059: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c:617: +static void _rtl92cu_init_chipn_two_out_ep_priority(struct ieee80211_hw *hw, bool wmm_enable, ERROR: "foo * bar" should be "foo *bar" #1940: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:591: +void rtl92cu_fill_fake_txdesc(struct ieee80211_hw *hw, u8 *pdesc, Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by: -
Larry Finger authored
This driver contains one instance of a CamelCase variable, namely IS_81xxC_VENDOR_UMC_A_CUT. This macro is never used, thus it is deleted. Signed-off-by:
-
Larry Finger authored
File halbt_precomp.h contains the only CamelCase value, namely GetDefaultAdapter, but that macro is never used, thus it is deleted. Signed-off-by:
-
Larry Finger authored
There are a number of CamelCase variables remaining in the source files of modules rtl_pci, rtl_usb, and rtlwifi. The following checkpatch excettions are also fixed: for_kalle1/0001-rtlwifi-Remove-CamelCase-variables-from-base-code.patch ----------------------------------------------------------------------- CHECK: Unnecessary parentheses around 'rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]' #68: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:377: + if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]) || + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1])) { CHECK: Unnecessary parentheses around 'rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1]' #68: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:377: + if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]) || + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != + rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i + 1])) { WARNING: line over 80 characters #70: FILE: drivers/net/wireless/realtek/rtlwifi/efuse.c:379: + (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i + 1] != CHECK: No space is necessary after a cast #186: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c:396: + status->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #208: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/trx.c:335: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #243: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:301: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); CHECK: No space is necessary after a cast #252: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:368: + stats.rx_is40mhzpacket = (bool) GET_RX_DESC_BW(rxdesc); CHECK: No space is necessary after a cast #265: FILE: drivers/net/wireless/realtek/rtlwifi/rtl8192de/trx.c:475: + stats->rx_is40mhzpacket = (bool) GET_RX_DESC_BW(pdesc); WARNING: Unnecessary space before function pointer arguments #455: FILE: drivers/net/wireless/realtek/rtlwifi/wifi.h:1462: + void (*writen_sync) (struct rtl_priv *rtlpriv, u32 addr, void *buf, WARNING: Unnecessary space before function pointer arguments #483: FILE: drivers/net/wireless/realtek/rtlwifi/wifi.h:2257: + void (*fill_fake_txdesc) (struct ieee80211_hw *hw, u8 *pdesc, Note that not all checkpatch exceptions are addressed. Those will be handled in later patches. Signed-off-by: -
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
Larry Finger authored
The traditional license information is replaced by the SPDX form. There are no code changes. Signed-off-by:
-
