- 24 Jun, 2005 40 commits
-
-
-
Adrian Bunk authored
Another rollup of patches which give various symbols static scope Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Carsten Otte authored
Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Carsten Otte authored
Make sys_madvice/fadvice return sane with xip. Signed-off-by:
-
Carsten Otte authored
This patch reworks filemap_xip.c with the goal to reduce code duplication from mm/filemap.c. It applies agains 2.6.12-rc6-mm1. Instead of implementing the aio functions, this one implements the synchronous read/write functions only. For readv and writev, the generic fallback is used. For aio, we rely on the application doing the fallback. Since our "synchronous" function does memcpy immediately anyway, there is no performance difference between using the fallbacks or implementing each operation. Signed-off-by:
-
Carsten Otte authored
These are the ext2 related parts. Ext2 now uses the xip_* file operations along with the get_xip_page aop when mounted with -o xip. Signed-off-by:
-
Carsten Otte authored
- generic_file* file operations do no longer have a xip/non-xip split - filemap_xip.c implements a new set of fops that require get_xip_page aop to work proper. all new fops are exported GPL-only (don't like to see whatever code use those except GPL modules) - __xip_unmap now uses page_check_address, which is no longer static in rmap.c, and defined in linux/rmap.h - mm/filemap.h is now much more clean, plainly having just Linus' inline funcs moved here from filemap.c - fix includes in filemap_xip to make it build cleanly on i386 Signed-off-by:
-
Carsten Otte authored
This is the block device related part. The block device operation direct_access now has a struct block_device as first parameter. Signed-off-by:
-
Martin Waitz authored
This patch updates some comments to match code changes. Signed-off-by:
Martin Waitz <tali@admingilde.org> Signed-off-by:
-
Martin Waitz authored
There was a complaint that function declarations are shown tabular in the documentation since switching to xmlto. This patch disables tabular mode when the function fits in one line. Signed-off-by:
-
Jiri Slaby authored
Fix documentation build with `make O=' Cc: Martin Waitz <tali@admingilde.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Matt Domsch authored
This patch adds version and srcversion files to /sys/module/${modulename} containing the version and srcversion fields of the module's modinfo section (if present). /sys/module/e1000 |-- srcversion `-- version This patch differs slightly from the version posted in January, as it now uses the new kstrdup() call in -mm. Why put this in sysfs? a) Tools like DKMS, which deal with changing out individual kernel modules without replacing the whole kernel, can behave smarter if they can tell the version of a given module. The autoinstaller feature, for example, which determines if your system has a "good" version of a driver (i.e. if the one provided by DKMS has a newer verson than that provided by the kernel package installed), and to automatically compile and install a newer version if DKMS has it but your kernel doesn't yet have that version. b) Because sysadmins manually, or with tools like DKMS, can switch out modules on the file system, you can't count on 'modinfo foo.ko', which looks at /lib/modules/${kernelver}/... actually matching what is loaded into the kernel already. Hence asking sysfs for this. c) as the unbind-driver-from-device work takes shape, it will be possible to rebind a driver that's built-in (no .ko to modinfo for the version) to a newly loaded module. sysfs will have the currently-built-in version info, for comparison. d) tech support scripts can then easily grab the version info for what's running presently - a question I get often. There has been renewed interest in this patch on linux-scsi by driver authors. As the idea originated from GregKH, I leave his Signed-off-by: intact, though the implementation is nearly completely new. Compiled and run on x86 and x86_64. From: Matthew Dobson <colpatch@us.ibm.com> build fix From: Thierry Vignaud <tvignaud@mandriva.com> build fix From: Matthew Dobson <colpatch@us.ibm.com> warning fix Signed-off-by:Greg Kroah-Hartman <greg@kroah.com> Signed-off-by:
Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch is necessary to correct I2C detect after normal_i2c_range removal in gregkh-i2c-i2c-address_range_removal.patch. Signed-off-by:
Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch adds support for various SAA7134 cards and brings some fixes. Signed-off-by:
Fabrice Aeschbacher <fabrice.aeschbacher@laposte.net> Signed-off-by: Hermann Pitton <hermann.pitton@onlinehome.de>. Signed-off-by:
Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by:
-
Mauro Carvalho Chehab authored
Tuner improvements and additions. TEA5767 FM tuner added. Several small fixes. Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch adds support for various CX88 cards and allows specifying card addresses. Signed-off-by:
Michael Krufky <mkrufky@m1k.net> Signed-off-by:
cybercide@f2s.com <cybercide@f2s.com> Signed-off-by:
Catalin Climov <catalin@climov.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by:
Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by:
-
Michael Krufky authored
Add support for tuner#60: Thomson DDT 7611 (ATSC/NTSC) Change tuner in card#28 (DViCO FusionHDTV3 Gold-T) from tuner=52 (Tuner Thomson DDT 7610) to tuner=60 (Tuner Thomson DDT 7611) Signed-off-by:
-
Michael Krufky authored
Even though it says DViCO FusionHDTV3 Gold-Q on the box, Gold-T is printed on the card. This fix corrects the error in all places, and corrects the tuner name Thomson DDT 7611 (ATSC/NTSC) in the documentation. This applies against 2.6.12-rc5-mm2 after applying Manueal Capinha's patch "Add support for PixelView Ultra Pro in v4l" (because of the change from card=27 to card=28) Signed-off-by:
-
Manuel Capinha authored
The following patch adds support for the PixelView Ultra Pro video capture card in v4l. - It removes the remote control key definitions from ir-kbd-gpio.c and moves them to ir-common.c so that they can be shared between bt878 and cx88 based cards. - The patch also moves the FUSIONHDTV_3_GOLD_Q card from number 27 to 28 to regain compatibility with the V4L cvs. Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch synchronizes documentation from V4L CVS with current kernel release. Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch fixes PAL-M chroma subcarrier frequency (FSC) to its correct value of 3.5756115 MHz and adjusts horizontal total samples for PAL-M, according with formula Line Draw Time / (4*FSC). Signed-off-by:
-
Michael Schimek authored
This patch fixes NTSC VBI capturing in the saa7134 driver. Signed-off-by:
Michael H. Schimek <mschimek@gmx.at> Cc: <video4linux-list@redhat.com> Signed-off-by:
-
Peter Skipworth authored
The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
-
Michael Krufky authored
This patch allows full analog functionality for the DViCO FusionHDTV3 Gold-Q, 18ac:d820 which has a Conexant cx23882, Thompson7611, and LG 3202. It does NOT yet support digital decoding or digital audio without the internal analog audio jack connected to the sound board, but it works perfectly in analog mode. Signed-off-by:
-
Adrian Bunk authored
VIDEO_CX88_DVB must select DVB_CX22702 (due to its cx22702_attach usage). This patch fixes kernel Bugzilla #4594 (http://bugzilla.kernel.org/show_bug.cgi?id=4594). Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Alexey Dobriyan authored
> - *ptr = sg_dma_address(list) - list->offset; > + *ptr = cpu_to_le32(sg_dma_address(list) - list->offset); Clearly mark pointers to little-endian things. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Acked-by:
Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
-
Gerd Knorr authored
Fix byteorder bug in the saa7134 driver. With that ObviouslyCorrect[tm] patch applied the driver reportly works on powerpc. Signed-off-by:
-
NeilBrown authored
Set the recovery directory via /proc/fs/nfsd/nfs4recoverydir. It may be changed any time, but is used only on startup. Signed-off-by:
Andy Adamson <andros@citi.umich.edu> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by:
-
NeilBrown authored
This patch adds the code to create and remove client subdirectories from the recovery directory, as described in the previous patch comment. Signed-off-by:
-
NeilBrown authored
NFSv4 clients are required to know what state they have on the server so that they can reclaim it on server reboot. However, it is possible for pathalogical combinations of server reboots and network partitions to leave a client in a state where it cannot know whether it has lost its state on the server. For this reason, rfc3530 requires that we store some information about clients to stable storage. So we maintain a directory /var/lib/nfs/v4recovery with a subdirectory for each client with active state. We leave open the possibility of including files underneath each such subdirectory with information about the client, but for now the subdirectories are empty. We create a client subdirectory whenever a client makes its first non-reclaim open_confirm. We remove a client subdirectory whenever either a) its lease expires, or b) the grace period ends without it reclaiming anything. When handling reclaims, we allow the reclaim if and only if the client doing the reclaim has a subdirectory. This patch adds just the code to scan the recovery directory on nfsd startup. Signed-off-by: -
NeilBrown authored
The cb_parsed field is only used by probe_callback, to determine whether the callback information has been filled in by setclientid. But there is no way that probe_callback() can be called without that having already happened, so that check is superfluous, as is cb_parsed. Signed-off-by:
-
NeilBrown authored
>From the language of rfc3530 section 8.1.3 (e.g., the suggestion that a "process id" might be a reasonable lockowner value) it's conceivable that a client might want to use the same lockowner string on multiple files, so we may as well allow that. We expect each use of open_to_lockowner to create a distinct seqid stream, though. For now we're also allowing multiple uses of open_to_lockowner with the same open, though it seems unlikely clients would actually do that. Also add a comment reminding myself of some very non-scalable data structures. Signed-off-by:
-
NeilBrown authored
Trivial renaming patch: I can never remember, while looking at various lists relating the nfsd4 state structures, which are the "heads" and which are items on other lists, or which structures are actually on the various lists. The following convention helps me: given structures foo and bar, with foo containing the head of a list of bars, use "bars" for the name of the head of the list contained in the struct foo, and use "per_foo" for the entries in the struct bars. Already done for struct nfs4_file; go ahead and do it for the other nfsd4 state structures. Signed-off-by:
-
NeilBrown authored
Minor cleanup, remove some unnecessary printk's. Signed-off-by:
-
NeilBrown authored
Trivial whitespace and comment fixes. Signed-off-by:
-
NeilBrown authored
Change from "goto" to "else if" format in setclientid_confirm. From: Fred Isaman Signed-off-by:
-
NeilBrown authored
NFS4_INVAL is not a valid error for setclientid_confirm, and INUSE is the more logical error here anyway. From: Fred Isaman Signed-off-by:
-
NeilBrown authored
Setclientid_confirm code confused states 1 and 3 (numbering from the IMPLEMENTATION section of rfc3530, section 14.2.33). Fix this. State 1 allows the client to change the callback channel on the fly. We don't implement this currently, so just turn off the callback channel in this case. From: Fred Isaman Signed-off-by:
-
NeilBrown authored
Setclientid code assumes there is only one match in unconfirmed list. Make sure that assumption holds. From: Fred Isaman Signed-off-by:
-
