Pass through mode is to allow packets in MAP format to be passed
on to the stack. rmnet driver can be used to process and demultiplex
these packets.

Pass through mode can be enabled when the device is in raw ip mode only.
Conversely, raw ip mode cannot be disabled when pass through mode is
enabled.

Userspace can use pass through mode in conjunction with rmnet driver
through the following steps-

1. Enable raw ip mode on qmi_wwan device
2. Enable pass through mode on qmi_wwan device
3. Create a rmnet device with qmi_wwan device as real device using netlink
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/1611560015-20034-1-git-send-email-subashab@codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniele Palmas says:

====================
net: usb: qmi_wwan: new mux_id sysfs file

this patch series add a sysfs file to let userspace know which mux
id has been used to create a qmimux network interface.

I'm aware that adding new sysfs files is not usually the right path,
but my understanding is that this piece of information can't be
retrieved in any other way and its absence restricts how
userspace application (e.g. like libqmi) can take advantage of the
qmimux implementation in qmi_wwan.
====================

Link: https://lore.kernel.org/r/20210127153433.12237-1-dnlplm@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Document qmap/mux_id sysfs file showing qmimux interface id
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add qmimux interface sysfs file qmap/mux_id to show qmap id set
during the interface creation, in order to provide a method for
userspace to associate QMI control channels to network interfaces.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This change fixes the checkpatch warning described in this commit
commit cbacb5ab ("docs: printk-formats: Stop encouraging use of
  unnecessary %h[xudi] and %hh[xudi]")

Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].

Cleanup output to use __func__ over explicit function strings.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210124190804.1964580-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/can/dev.c
  b552766c ("can: dev: prevent potential information leak in can_fill_info()")
  3e77f70e ("can: dev: move driver related infrastructure into separate subdir")
  0a042c6e ("can: dev: move netlink related code into seperate file")

  Code move.

drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
  57ac4a31 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down")
  214baf22 ("net/mlx5e: Support HTB offload")

  Adjacent code changes

net/switchdev/switchdev.c
  20776b46 ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP")
  ffb68fc5 ("net: switchdev: remove the transaction structure from port object notifiers")
  bae33f2b ("net: switchdev: remove the transaction structure from port attributes")

  Transaction parameter gets dropped otherwise keep the fix.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 subfunction support

Parav Pandit says:

This patchset introduces support for mlx5 subfunction (SF).

A subfunction is a lightweight function that has a parent PCI function on
which it is deployed. mlx5 subfunction has its own function capabilities
and its own resources. This means a subfunction has its own dedicated
queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from
the parent PCI function.

When subfunction is RDMA capable, it has its own QP1, GID table and rdma
resources neither shared nor stolen from the parent PCI function.

A subfunction has dedicated window in PCI BAR space that is not shared
with the other subfunctions or parent PCI function. This ensures that all
class devices of the subfunction accesses only assigned PCI BAR space.

A Subfunction supports eswitch representation through which it supports tc
offloads. User must configure eswitch to send/receive packets from/to
subfunction port.

Subfunctions share PCI level resources such as PCI MSI-X IRQs with
their other subfunctions and/or with its parent PCI function.

Subfunction support is discussed in detail in RFC [1] and [2].
RFC [1] and extension [2] describes requirements, design and proposed
plumbing using devlink, auxiliary bus and sysfs for systemd/udev
support. Functionality of this patchset is best explained using real
examples further below.

overview:
--------
A subfunction can be created and deleted by a user using devlink port
add/delete interface.

A subfunction can be configured using devlink port function attribute
before its activated.

When a subfunction is activated, it results in an auxiliary device on
the host PCI device where it is deployed. A driver binds to the
auxiliary device that further creates supported class devices.

example subfunction usage sequence:
-----------------------------------
Change device to switchdev mode:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev

Add a devlink port of subfunction flavour:
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88

Configure mac address of the port function:
$ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88

Now activate the function:
$ devlink port function set ens2f0npf0sf88 state active

Now use the auxiliary device and class devices:
$ devlink dev show
pci/0000:06:00.0
auxiliary/mlx5_core.sf.4

$ ip link show
127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff
    altname enp6s0f0np0
129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff

$ rdma dev show
43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112
44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112

After use inactivate the function:
$ devlink port function set ens2f0npf0sf88 state inactive

Now delete the subfunction port:
$ devlink port del ens2f0npf0sf88

[1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/
[2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2

=================

* tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Add devlink subfunction port documentation
  devlink: Extend devlink port documentation for subfunctions
  devlink: Add devlink port documentation
  net/mlx5: SF, Port function state change support
  net/mlx5: SF, Add port add delete functionality
  net/mlx5: E-switch, Add eswitch helpers for SF vport
  net/mlx5: E-switch, Prepare eswitch to handle SF vport
  net/mlx5: SF, Add auxiliary device driver
  net/mlx5: SF, Add auxiliary device support
  net/mlx5: Introduce vhca state event notifier
  devlink: Support get and set state of port function
  devlink: Support add and delete devlink port
  devlink: Introduce PCI SF port flavour and port attribute
  devlink: Prepare code to fill multiple port function attributes
====================

Link: https://lore.kernel.org/r/20210122193658.282884-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes including fixes from can, xfrm, wireless,
  wireless-drivers and netfilter trees. Nothing scary, Intel
  WiFi-related fixes seemed most notable to the users.

  Current release - regressions:

   - dsa: microchip: ksz8795: fix KSZ8794 port map again to program the
     CPU port correctly

  Current release - new code bugs:

   - iwlwifi: pcie: reschedule in long-running memory reads

  Previous releases - regressions:

   - iwlwifi: dbg: don't try to overwrite read-only FW data

   - iwlwifi: provide gso_type to GSO packets

   - octeontx2: make sure the buffer is 128 byte aligned

   - tcp: make TCP_USER_TIMEOUT accurate for zero window probes

   - xfrm: fix wraparound in xfrm_policy_addr_delta()

   - xfrm: fix oops in xfrm_replay_advance_bmp due to a race between
     CPUs in presence of packet reorder

   - tcp: fix TLP timer not set when CA_STATE changes from DISORDER to
     OPEN

   - wext: fix NULL-ptr-dereference with cfg80211's lack of commit()

  Previous releases - always broken:

   - igc: fix link speed advertising

   - stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA
     addressing

   - team: protect features update by RCU to avoid deadlock

   - xfrm: fix disable_xfrm sysctl when used on xfrm interfaces
     themselves

   - fec: fix temporary RMII clock reset on link up

   - can: dev: prevent potential information leak in can_fill_info()

  Misc:

   - mrp: fix bad packing of MRP test packet structures

   - uapi: fix big endian definition of ipv6_rpl_sr_hdr

   - add David Ahern to IPv4/IPv6 maintainers"

* tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
  rxrpc: Fix memory leak in rxrpc_lookup_local
  mlxsw: spectrum_span: Do not overwrite policer configuration
  selftests: forwarding: Specify interface when invoking mausezahn
  stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing
  net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family.
  ibmvnic: Ensure that CRQ entry read are correctly ordered
  MAINTAINERS: add missing header for bonding
  net: decnet: fix netdev refcount leaking on error path
  net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP
  can: dev: prevent potential information leak in can_fill_info()
  net: fec: Fix temporary RMII clock reset on link up
  net: lapb: Add locking to the lapb module
  team: protect features update by RCU to avoid deadlock
  MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers
  net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable
  net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset
  net/mlx5e: Revert parameters on errors when changing trust state without reset
  net/mlx5e: Correctly handle changing the number of queues when the interface is down
  net/mlx5e: Fix CT rule + encap slow path offload and deletion
  net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled
  ...

Pali Rohár says:

====================
net: sfp: add support for GPON RTL8672/RTL9601C and Ubiquiti U-Fiber

This is fourth version of patches which add workarounds for
RTL8672/RTL9601C EEPROMs and Ubiquiti U-Fiber Instant SFP.
====================

Link: https://lore.kernel.org/r/20210125150228.8523-1-pali@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Ubiquiti U-Fiber Instant SFP GPON module has nonsensical information
stored in its EEPROM. It claims to support all transceiver types including
10G Ethernet. Clear all claimed modes and set only 1000baseX_Full, which is
the only one supported.

This module has also phys_id set to SFF, and the SFP subsystem currently
does not allow to use SFP modules detected as SFFs. Add exception for this
module so it can be detected as supported.

This change finally allows to detect and use SFP GPON module Ubiquiti
U-Fiber Instant on Linux system.

EEPROM content of this SFP module is (where XX is serial number):

00: 02 04 0b ff ff ff ff ff ff ff ff 03 0c 00 14 c8    ???........??.??
10: 00 00 00 00 55 42 4e 54 20 20 20 20 20 20 20 20    ....UBNT
20: 20 20 20 20 00 18 e8 29 55 46 2d 49 4e 53 54 41        .??)UF-INSTA
30: 4e 54 20 20 20 20 20 20 34 20 20 20 05 1e 00 36    NT      4   ??.6
40: 00 06 00 00 55 42 4e 54 XX XX XX XX XX XX XX XX    .?..UBNTXXXXXXXX
50: 20 20 20 20 31 34 30 31 32 33 20 20 60 80 02 41        140123  `??A
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The workaround for VSOL V2801F brand based GPON SFP modules added in commit
0d035bed ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0
workaround") works only for IDs added explicitly to the list. Since there
are rebranded modules where OEM vendors put different strings into the
vendor name field, we cannot base workaround on IDs only.

Moreover the issue which the above mentioned commit tried to work around is
generic not only to VSOL based modules, but rather to all GPON modules
based on Realtek RTL8672 and RTL9601C chips.

These include at least the following GPON modules:
* V-SOL V2801F
* C-Data FD511GX-RM0
* OPTON GP801R
* BAUDCOM BD-1234-SFM
* CPGOS03-0490 v2.0
* Ubiquiti U-Fiber Instant
* EXOT EGS1

These Realtek chips have broken EEPROM emulator which for N-byte read
operation returns just the first byte of EEPROM data, followed by N-1
zeros.

Introduce a new function, sfp_id_needs_byte_io(), which detects SFP modules
with broken EEPROM emulator based on N-1 zeros and switch to 1 byte EEPROM
reading operation.

Function sfp_i2c_read() now always uses single byte reading when it is
required and when function sfp_hwmon_probe() detects single byte access,
it disables registration of hwmon device, because in this case we cannot
reliably and atomically read 2 bytes as is required by the standard for
retrieving values from diagnostic area.

(These Realtek chips are broken in a way that violates SFP standards for
diagnostic interface. Kernel in this case simply cannot do anything less
of skipping registration of the hwmon interface.)

This patch fixes reading of EEPROM content from SFP modules based on
Realtek RTL8672 and RTL9601C chips. Diagnostic interface of EEPROM stays
broken and cannot be fixed.

Fixes: 0d035bed ("net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround")
Co-developed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 9ebeddef ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked.

	struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp)
	-               peer->local = local;
	+               peer->local = rxrpc_get_local(local);

rxrpc_discard_prealloc also need ref release in discarding.

syzbot report:
BUG: memory leak
unreferenced object 0xffff8881080ddc00 (size 256):
  comm "syz-executor339", pid 8462, jiffies 4294942238 (age 12.350s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff  ................
  backtrace:
    [<000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline]
    [<000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline]
    [<000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline]
    [<000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244
    [<000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149
    [<00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64
    [<000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126
    [<0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152
    [<00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342
    [<00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483
    [<0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110
    [<00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226
    [<000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957
    [<00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline]
    [<00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline]
    [<00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023
    [<000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    [<00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 9ebeddef ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Reported-and-tested-by: syzbot+305326672fed51b205f7@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
mlxsw: Various fixes

Patch #1 fixes wrong invocation of mausezahn in a couple of selftests.
The tests started failing after Fedora updated their libnet package from
version 1.1.6 to 1.2.1. With the fix the tests pass regardless of libnet
version.

Patch #2 fixes an issue in the mirroring to CPU code that results in
policer configuration being overwritten.
====================

Link: https://lore.kernel.org/r/20210128144820.3280295-1-idosch@idosch.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The purpose of the delayed work in the SPAN module is to potentially
update the destination port and various encapsulation parameters of SPAN
agents that point to a VLAN device or a GRE tap. The destination port
can change following the insertion of a new route, for example.

SPAN agents that point to a physical port or the CPU port are static and
never change throughout the lifetime of the SPAN agent. Therefore, skip
over them in the delayed work.

This fixes an issue where the delayed work overwrites the policer
that was set on a SPAN agent pointing to the CPU. Modifying the delayed
work to inherit the original policer configuration is error-prone, as
the same will be needed for any new parameter.

Fixes: 4039504e ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Specify the interface through which packets should be transmitted so
that the test will pass regardless of the libnet version against which
mausezahn is linked.

Fixes: cab14d10 ("selftests: Add version of router_multipath.sh using nexthop objects")
Fixes: 3d578d87 ("selftests: forwarding: Test IPv4 weighted nexthops")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix an issue where dump stack is printed and Reset Adapter occurs when
PSE0 GbE or/and PSE1 GbE is/are enabled. EHL PSE0 GbE and PSE1 GbE use
32 bits DMA addressing whereas EHL PCH GbE uses 64 bits DMA addressing.

[   25.535095] ------------[ cut here ]------------
[   25.540276] NETDEV WATCHDOG: enp0s29f2 (intel-eth-pci): transmit queue 2 timed out
[   25.548749] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x259/0x260
[   25.558004] Modules linked in: 8021q bnep bluetooth ecryptfs snd_hda_codec_hdmi intel_gpy marvell intel_ishtp_loader intel_ishtp_hid iTCO_wdt mei_hdcp iTCO_vendor_support x86_pkg_temp_thermal kvm_intel dwmac_intel stmmac kvm igb pcs_xpcs irqbypass phylink snd_hda_intel intel_rapl_msr pcspkr dca snd_hda_codec i915 i2c_i801 i2c_smbus libphy intel_ish_ipc snd_hda_core mei_me intel_ishtp mei spi_dw_pci 8250_lpss spi_dw thermal dw_dmac_core parport_pc tpm_crb tpm_tis parport tpm_tis_core tpm intel_pmc_core sch_fq_codel uhid fuse configfs snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_sof_xtensa_dsp snd_sof snd_soc_acpi_intel_match snd_soc_acpi snd_intel_dspcfg ledtrig_audio snd_soc_core snd_compress ac97_bus snd_pcm snd_timer snd soundcore
[   25.633795] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G     U            5.11.0-rc4-intel-lts-MISMAIL5+ #5
[   25.644306] Hardware name: Intel Corporation Elkhart Lake Embedded Platform/ElkhartLake LPDDR4x T4 RVP1, BIOS EHLSFWI1.R00.2434.A00.2010231402 10/23/2020
[   25.659674] RIP: 0010:dev_watchdog+0x259/0x260
[   25.664650] Code: e8 3b 6b 60 ff eb 98 4c 89 ef c6 05 ec e7 bf 00 01 e8 fb e5 fa ff 89 d9 4c 89 ee 48 c7 c7 78 31 d2 9e 48 89 c2 e8 79 1b 18 00 <0f> 0b e9 77 ff ff ff 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 48 c7
[   25.685647] RSP: 0018:ffffb7ca80160eb8 EFLAGS: 00010286
[   25.691498] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000103
[   25.699483] RDX: 0000000080000103 RSI: 00000000000000f6 RDI: 00000000ffffffff
[   25.707465] RBP: ffff985709ce0440 R08: 0000000000000000 R09: c0000000ffffefff
[   25.715455] R10: ffffb7ca80160cf0 R11: ffffb7ca80160ce8 R12: ffff985709ce039c
[   25.723438] R13: ffff985709ce0000 R14: 0000000000000008 R15: ffff9857068af940
[   25.731425] FS:  0000000000000000(0000) GS:ffff985864300000(0000) knlGS:0000000000000000
[   25.740481] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   25.746913] CR2: 00005567f8bb76b8 CR3: 00000001f8e0a000 CR4: 0000000000350ee0
[   25.754900] Call Trace:
[   25.757631]  <IRQ>
[   25.759891]  ? qdisc_put_unlocked+0x30/0x30
[   25.764565]  ? qdisc_put_unlocked+0x30/0x30
[   25.769245]  call_timer_fn+0x2e/0x140
[   25.773346]  run_timer_softirq+0x1f3/0x430
[   25.777932]  ? __hrtimer_run_queues+0x12c/0x2c0
[   25.783005]  ? ktime_get+0x3e/0xa0
[   25.786812]  __do_softirq+0xa6/0x2ef
[   25.790816]  asm_call_irq_on_stack+0xf/0x20
[   25.795501]  </IRQ>
[   25.797852]  do_softirq_own_stack+0x5d/0x80
[   25.802538]  irq_exit_rcu+0x94/0xb0
[   25.806475]  sysvec_apic_timer_interrupt+0x42/0xc0
[   25.811836]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[   25.817586] RIP: 0010:cpuidle_enter_state+0xd9/0x370
[   25.823142] Code: 85 c0 0f 8f 0a 02 00 00 31 ff e8 22 d5 7e ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 47 02 00 00 31 ff e8 7b a0 84 ff fb 45 85 f6 <0f> 88 ab 00 00 00 49 63 ce 48 2b 2c 24 48 89 c8 48 6b d1 68 48 c1
[   25.844140] RSP: 0018:ffffb7ca800f7e80 EFLAGS: 00000206
[   25.849996] RAX: ffff985864300000 RBX: 0000000000000003 RCX: 000000000000001f
[   25.857975] RDX: 00000005f2028ea8 RSI: ffffffff9ec5907f RDI: ffffffff9ec62a5d
[   25.865961] RBP: 00000005f2028ea8 R08: 0000000000000000 R09: 0000000000029d00
[   25.873947] R10: 000000137b0e0508 R11: ffff9858643294e4 R12: ffff9858643336d0
[   25.881935] R13: ffffffff9ef74b00 R14: 0000000000000003 R15: 0000000000000000
[   25.889918]  cpuidle_enter+0x29/0x40
[   25.893922]  do_idle+0x24a/0x290
[   25.897536]  cpu_startup_entry+0x19/0x20
[   25.901930]  start_secondary+0x128/0x160
[   25.906326]  secondary_startup_64_no_verify+0xb0/0xbb
[   25.911983] ---[ end trace b4c0c8195d0ba61f ]---
[   25.917193] intel-eth-pci 0000:00:1d.2 enp0s29f2: Reset adapter.

Fixes: 67c08ac4 ("net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID")
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Link: https://lore.kernel.org/r/20210126100844.30326-1-mohammad.athari.ismail@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Added PCI IDs for both Ethernet TSN Controllers on the ADL-S.

Also, skip SerDes programming sequences as these are being carried out
at the BIOS level for ADL-S.
Signed-off-by: Wong, Vee Khee <vee.khee.wong@intel.com>
Link: https://lore.kernel.org/r/20210126085832.3814-1-vee.khee.wong@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

lsusb -v for this device:

Bus 003 Device 007: ID 1e2d:0069
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x1e2d
  idProduct          0x0069
  bcdDevice            0.00
  iManufacturer           4 Cinterion Wireless Modules
  iProduct                3 PLSx3
  iSerial                 5 fa3c1419
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          352
    bNumInterfaces         10
    bConfigurationValue     1
    iConfiguration          2 Cinterion Configuration
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              500mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         2
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          3
      CDC Union:
        bMasterInterface        2
        bSlaveInterface         3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         4
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          5
      CDC Union:
        bMasterInterface        4
        bSlaveInterface         5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         6
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          7
      CDC Union:
        bMasterInterface        6
        bSlaveInterface         7
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        7
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         8
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       0
      bFunctionProtocol       0
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        8
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      6 Ethernet Networking
      bInterfaceProtocol      0
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC Ethernet:
        iMacAddress                      1 00A0C6C14190
        bmEthernetStatistics    0x00000000
        wMaxSegmentSize              16384
        wNumberMCFilters            0x0001
        bNumberPowerFilters              0
      CDC Union:
        bMasterInterface        8
        bSlaveInterface         9
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        9
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        9
      bAlternateSetting       1
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8a  EP 10 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)
Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Link: https://lore.kernel.org/r/20210126044245.8455-1-gciofono@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull locking fixes from Thomas Gleixner:
 "A set of PI futex fixes:

   - Address a longstanding issue where the user space part of the PI
     futex is not writeable. The kernel returns with inconsistent state
     which can in the worst case result in a UAF of a tasks kernel
     stack.

     The solution is to establish consistent kernel state which makes
     future operations on the futex fail because user space and kernel
     space state are inconsistent. Not a problem as PI futexes
     fundamentaly require a functional RW mapping and if user space
     pulls the rug under it, then it can keep the pieces it asked for.

   - Address an issue where the return value is incorrect in case that
     the futex was acquired after a timeout/signal made the waiter drop
     out of the rtmutex wait.

     In one of the corner cases the kernel returned an error code
     despite having successfully acquired the futex"

* tag 'locking-urgent-2021-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Handle faults correctly for PI futexes
  futex: Simplify fixup_pi_state_owner()
  futex: Use pi_state_update_owner() in put_pi_state()
  rtmutex: Remove unused argument from rt_mutex_proxy_unlock()
  futex: Provide and use pi_state_update_owner()
  futex: Replace pointless printk in fixup_owner()
  futex: Ensure the correct return value from futex_lock_pi()

Rework initial test to jump over init code
if memory allocation has failed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210127152731.748663-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull xen fixes from Juergen Gross:

 - A fix for a regression introduced in 5.11 resulting in Xen dom0
   having problems to correctly initialize Xenstore.

 - A fix for avoiding WARN splats when booting as Xen dom0 with
   CONFIG_AMD_MEM_ENCRYPT enabled due to a missing trap handler for the
   #VC exception (even if the handler should never be called).

 - A fix for the Xen bklfront driver adapting to the correct but
   unexpected behavior of new qemu.

* tag 'for-linus-5.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: avoid warning in Xen pv guest with CONFIG_AMD_MEM_ENCRYPT enabled
  xen: Fix XenStore initialisation for XS_LOCAL
  xen-blkfront: allow discard-* nodes to be optional

Merge tag 'asm-generic-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull ia64 fixes from Arnd Bergmann:
 "asm-generic/ia64 fixes, and mark as orphaned

  Commit 2b49ddce ("ia64: convert to legacy_timer_tick") from my
  timer series I merged through the asm-generic tree caused a regression
  on all ia64 machines, as bisected by Adrian Glaubitz.

  Tony Luck is no longer really working on ia64, so instead of merging
  the fix through his tree, we ended up deciding that I'd merge the fix
  myself along a patch to mark the architecture as Orphaned and a
  compile time warning fix I made while working on the regression"

[ HPE no longer accepts orders for new Itanium hardware, and Intel
  stopped accepting orders a year ago. While intel is still officially
  shipping chips until July 29, 2021, it's unlikely that any such orders
  actually exist.

  It's dead, Jim.
                     - Linus ]

* tag 'asm-generic-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  ia64: Mark architecture as orphaned
  ia64: fix xchg() warning
  ia64: fix timer cleanup regression

Pull ARM SoC fixes from Arnd Bergmann:
 "These are the current arm-soc bug fixes for linux-5.11. I already
  merged a larger set that just came in during the past three days but
  has not had much exposure in linux-next, but this is the subset I
  merged last week.

  Most of these are for the NXP i.MX platform (descriptions from their
  pull request):

   - Fix pcf2127 reset for imx7d-flex-concentrator board.
   - Fix i.MX6 suspend with Thumb-2 kernel.
   - Fix ethernet-phy address issue on imx6qdl-sr-som board.
   - Fix GPIO3 `gpio-ranges` on i.MX8MP.
   - Select SOC_BUS for IMX_SCU driver to fix build issue.
   - Fix backlight pwm on imx6qdl-kontron-samx6i which is lost from
     #pwm-cells conversion.
   - Fix duplicated bus node name for i.MX8MN SoC.
   - Fix reset register offset on LS1028A SoC.
   - Rename MMC node aliases for imx6q-tbs2910 to keep the MMC device
     index consistent with previous kernel version.
   - Selecting ARM_GIC_V3 on non-CP15 processors to fix one build
     failure with i.MX8M SoC driver.
   - Fix typos with status property on imx6qdl-kontron-samx6i board.
   - Fix duplicated regulator-name on imx6qdl-gw52xx board.

  Aside from i.MX, the bugfixes are all over the place:

   - Coccinelle found a refcount imbalance on integrator
   - defconfig fix for TI K3
   - A boot regression fix for ST ux500
   - A code preemption fix for the optee driver
   - USB DMA regression on Broadcom Stingray
   - A bogus boot time warning fix for at91 code"

* tag 'arm-soc-fixes-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: Include bcm2835 subsequents into search
  arm64: dts: broadcom: Fix USB DMA address translation for Stingray
  drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[]
  drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs
  tee: optee: replace might_sleep with cond_resched
  firmware: imx: select SOC_BUS to fix firmware build
  arm64: dts: imx8mp: Correct the gpio ranges of gpio3
  ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
  ARM: imx: build suspend-imx6.S with arm instruction set
  ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
  ARM: dts: ux500: Reserve memory carveouts
  arm64: defconfig: Drop unused K3 SoC specific options
  bus: arm-integrator-lm: Add of_node_put() before return statement
  ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming
  ARM: dts: imx6qdl-kontron-samx6i: fix i2c_lcd/cam default status
  ARM: imx: fix imx8m dependencies
  ARM: dts: tbs2910: rename MMC node aliases
  arm64: dts: ls1028a: fix the offset of the reset register
  arm64: dts: imx8mn: Fix duplicate node name
  ARM: dts: imx6qdl-kontron-samx6i: fix pwms for lcd-backlight

Pull rdma fixes from Jason Gunthorpe:
 "Several recent regressions and some bug fixes:

   - Typo corrupting the max_recv_sge for cxgb4

   - Regression from re-using kernel enums as a HW AbI in vmw_pvrdma

   - Sleeping inside a spinlock in hns

   - Revert the attempt to fix devlink deadlocks as the fix is more buggy

   - Typo in sysfs_emit_at conversions

   - Revert the removal of VLAN support in rxe"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  Revert "RDMA/rxe: Remove VLAN code leftovers from RXE"
  RDMA/usnic: Fix misuse of sysfs_emit_at
  Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion"
  RDMA/hns: Use mutex instead of spinlock for ida allocation
  RDMA/vmw_pvrdma: Fix network_hdr_type reported in WC
  RDMA/cxgb4: Fix the reported max_recv_sge value

Pull HID fixes from Jiri Kosina:

 - NULL pointer dereference regression fix for Wacom driver (Jason
   Gerecke)

 - functional regression fix for pam handling on some Elan and Synaptics
   touchpads (Kai-Heng Feng)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: wacom: Correct NULL dereference on AES pen proximity
  HID: multitouch: Apply MT_QUIRK_CONFIDENCE quirk for multi-input devices

Pull media fixes from Mauro Carvalho Chehab:

 - a V4L2 core regression at videobuf2 when checking for single-plane
   dmabuf

 - a change at uAPI header v4l2-subdev.h, fixing a breakage as BIT()
   macro is not available in userspace

 - fix some regressions at RC core due to the usage of microseconds
   everywhere on it

 - a fix for a race condition at RC core

 - a rename on a newly-introduced kAPI symbol (v4l2_get_link_rate),
   currently used only by a single driver

 - Regression fixes for rcar-vin, cedrus, ite-cir, hantro, css, venus,
   and cec drivers.

* tag 'media/v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: hantro: Fix reset_raw_fmt initialization
  media: cec: add stm32 driver
  media: cedrus: Fix H264 decoding
  media: v4l2-subdev.h: BIT() is not available in userspace
  media: Revert "media: videobuf2: Fix length check for single plane dmabuf queueing"
  media: rc: ite-cir: fix min_timeout calculation
  media: venus: core: Fix platform driver shutdown
  media: rc: fix timeout handling after switch to microsecond durations
  media: v4l: common: Fix naming of v4l2_get_link_rate
  media: rcar-vin: fix return, use ret instead of zero
  media: ccs: Get static data version minor correctly
  media: ccs-pll: Fix link frequency for C-PHY
  media: rc: ensure that uevent can be read directly after rc device register

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes:

   - Build fix for CONFIG_PM=n in the mmp2 driver

   - Kconfig warning for unmet dependencies in the i.MX driver

   - Make the camera AHB clk always be enabled on qcom sc7180

   - Use rate round down semantics for qcom sm8250 SD clks"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mmp2: fix build without CONFIG_PM
  clk: qcom: gcc-sm250: Use floor ops for sdcc clks
  clk: imx: fix Kconfig warning for i.MX SCU clk
  clk: qcom: gcc-sc7180: Mark the camera abh clock always ON

Pull sound fixes from Takashi Iwai:
 "Although the incoming fixes haven't settled down yet, all changes here
  are small and mostly device-specific fixes, so nothing look worrisome.

   - Yet another USB-audio regression fixes

   - HD-audio ID fix and device-specific quirks

   - SOF Intel / SoundWire fixes including topology

   - ASoC Qualcomm and Mediatek fixes"

* tag 'sound-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
  ALSA: hda/via: Apply the workaround generically for Clevo machines
  ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E
  ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookup
  ASoC: mediatek: mt8192-mt6359: add format constraints for RT5682
  ASoC: ak4458: correct reset polarity
  ASoC: SOF: SND_INTEL_DSP_CONFIG dependency
  ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies
  ALSA: hda: intel-dsp-config: add PCI id for TGL-H
  ALSA: usb-audio: workaround for iface reset issue
  ALSA: pcm: One more dependency for hw constraints
  ALSA: hda/realtek: Enable headset of ASUS B1400CEPE with ALC256
  ASoC: Intel: Skylake: Zero snd_ctl_elem_value
  ASoC: Intel: Skylake: skl-topology: Fix OOPs ib skl_tplg_complete
  ASoC: qcom: Fix number of HDMI RDMA channels on sc7180
  ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default
  ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default
  ASoC: topology: Properly unregister DAI on removal
  ASoC: topology: Fix memory corruption in soc_tplg_denum_create_values()
  ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field
  ASoC: AMD Renoir - refine DMI entries for some Lenovo products
  ...

This reverts commit dde3c6b7.

syzbot report a double-free bug. The following case can cause this bug.

 - mm/slab_common.c: create_cache(): if the __kmem_cache_create() fails,
   it does:

	out_free_cache:
		kmem_cache_free(kmem_cache, s);

 - but __kmem_cache_create() - at least for slub() - will have done

	sysfs_slab_add(s)
		-> sysfs_create_group() .. fails ..
		-> kobject_del(&s->kobj); .. which frees s ...

We can't remove the kmem_cache_free() in create_cache(), because other
error cases of __kmem_cache_create() do not free this.

So, revert the commit dde3c6b7 ("mm/slub: fix a memory leak in
sysfs_slab_add()") to fix this.

Reported-by: syzbot+d0bd96b4696c1ef67991@syzkaller.appspotmail.com
Fixes: dde3c6b7 ("mm/slub: fix a memory leak in sysfs_slab_add()")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the rtl8366rb driver there are some jam tables which contain
undocumented values.
While trying to understand what these tables actually do,
I noticed a discrepancy in how one of those was treated.
Most of them were plain u16 arrays, while the ethernet one was
an u16 matrix.
By looking at the vendor's droplets of source code these tables came from,
I found out that they were all originally u16 matrixes.

This commit standardizes the jam tables, turning them all into
jam_tbl_entry arrays. Each entry contains 2 u16 values.
This change makes it easier to understand how the jam tables are used
and also makes it possible for a single function to handle all of them,
removing some duplicated code.
Signed-off-by: Lorenzo Carletti <lorenzo.carletti98@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5 devlink traps support

Add support for devlink traps [1] reporting in mlx5,
mlx5 will also report/trap packets filtered due to dest mac steering miss

The first patch in the series defines the new DMAC trap type in devlink
for this purpose.

Other patches in the series are mlx5 only and they gradually traps support.
Supported traps:

DMAC: Drops due to destination MAC not configured in the MAC table
VLAN: Drops due to vlan not configured in the vlan table

Design note:
devlink instance is managed by the low level mlx5 core layer, mlx5 core will
serve as an abstraction layer for trap reporting, since we might have multiple
mlx5 interfaces who might want to report traps on the same device.
====================

Link: https://lore.kernel.org/r/20210126232419.175836-1-saeedm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Avoid trapping packets when the interface is down, and revive them when
interface is back up. Add API to mlx5 core retrieving the action by trap
id. Use it to apply traps when interface is up, and disable then when
interface is down.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for trapping packets which didn't match any DMAC in the MAC
table. Add a listener which adds/removes MAC trap rule in the flow
steering according to the trap's action trap/drop.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for listening to blocking events in the ETH driver. Listen
on trap event. If received, call mlx5e_handle_trap_event() which:
1) Verifies if driver needs open/close trap-RQ with respect to the
active traps count.
2) Inspects trap id and its action (trap/drop) and add/remove the flow
steering rule accordingly.
Otherwise, return an error.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce mlx5e_trap which includes a dedicated RQ and NAPI for trapped
packets. Trap-RQ processes packets that were destined to be dropped,
but for debug and visibility sake these packets are trapped and reported
to devlink.
Trap-RQ connects between the HW and the driver and is not a part of a
channel. Open mlx5e_create_rq() and mlx5_core_destroy_rq() as API and
add dedicate RQ handlers which report to devlink of trapped packets.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In order to support RQs outside of channel context, change
mlx5e_init_di_list() signature to accept NUMA node instead of cpu.
In addition, expose dma info helpers as API. This API will be used for
RQ's creation in other files in downstream patches.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add flow group to the L2 table to hold the catch-all DMAC rule. Add API
which adds/removes DMAC trap rule. This rule catches packets that were
destined to be dropped due to no-match with previous DMAC rules. The
trap rule steer these packets to the trap tir related to the trap-RQ.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add flow group to the VLAN table to hold the catch-all VLAN rule. Add
API which adds/removes VLAN trap rule. This rule catches packets that
were destined to be dropped due to no-match with previous VLAN rules.
The trap rule steer these packets to the trap tir related to the
trap-RQ.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Change steering flow to optimize traffic in promiscuous mode. On demand,
add a high priority table containing a catch-all rule. All incoming
packets are caught by this rule and steered directly to the TTC table.
Prior to this change, packets in promiscuous mode may suffer from up to
4 steering hops before reaching TTC table.
In addition, this patch will allow us adding a catch-all rule at the end
of MAC table to serve MAC trap, with no impact on promiscuous mode
performance.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In order to allow mlx5 core driver to trigger synchronous operations to
its consumers, add a blocking events handler. Add wrappers to
blocking_notifier_[call_chain/chain_register/chain_unregister]. Add trap
callback for action set and notify about this change. Following patches
in the set add a listener for this event.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>