- 03 Jul, 2018 5 commits
-
-
Borislav Petkov authored
commit 1f74c8a6 upstream. mce_no_way_out() does a quick check during #MC to see whether some of the MCEs logged would require the kernel to panic immediately. And it passes a struct mce where MCi_STATUS gets written. However, after having saved a valid status value, the next iteration of the loop which goes over the MCA banks on the CPU, overwrites the valid status value because we're using struct mce as storage instead of a temporary variable. Which leads to MCE records with an empty status value: mce: [Hardware Error]: CPU 0: Machine Check Exception: 6 Bank 0: 0000000000000000 mce: [Hardware Error]: RIP 10:<ffffffffbd42fbd7> {trigger_mce+0x7/0x10} In order to prevent the loss of the status register value, return immediately when severity is a panic one so that we can panic immediately with the first fatal MCE logged. This is also the intention of this function and not to noodle over the banks while a fatal MCE is already logged. Tony: read the rest of the MCA bank to populate the struct mce fully. Suggested-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180622095428.626-8-bp@alien8.deSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Luck authored
commit 40c36e27 upstream. Some injection testing resulted in the following console log: mce: [Hardware Error]: CPU 22: Machine Check Exception: f Bank 1: bd80000000100134 mce: [Hardware Error]: RIP 10:<ffffffffc05292dd> {pmem_do_bvec+0x11d/0x330 [nd_pmem]} mce: [Hardware Error]: TSC c51a63035d52 ADDR 3234bc4000 MISC 88 mce: [Hardware Error]: PROCESSOR 0:50654 TIME 1526502199 SOCKET 0 APIC 38 microcode 2000043 mce: [Hardware Error]: Run the above through 'mcelog --ascii' Kernel panic - not syncing: Machine check from unknown source This confused everybody because the first line quite clearly shows that we found a logged error in "Bank 1", while the last line says "unknown source". The problem is that the Linux code doesn't do the right thing for a local machine check that results in a fatal error. It turns out that we know very early in the handler whether the machine check is fatal. The call to mce_no_way_out() has checked all the banks for the CPU that took the local machine check. If it says we must crash, we can do so right away with the right messages. We do scan all the banks again. This means that we might initially not see a problem, but during the second scan find something fatal. If this happens we print a slightly different message (so I can see if it actually every happens). [ bp: Remove unneeded severity assignment. ] Signed-off-by:
-
Tony Luck authored
commit 4c5717da upstream. Currently we just check the "CAPID0" register to see whether the CPU can recover from machine checks. But there are also some special SKUs which do not have all advanced RAS features, but do enable machine check recovery for use with NVDIMMs. Add a check for any of bits {8:5} in the "CAPID5" register (each reports some NVDIMM mode available, if any of them are set, then the system supports memory machine check recovery). Signed-off-by:
-
Tony Luck authored
commit c7d606f5 upstream. Since we added support to add recovery from some errors inside the kernel in: commit b2f9d678 ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries") we have done a less than stellar job at reporting the cause of recoverable machine checks that occur in other parts of the kernel. The user just gets the unhelpful message: mce: [Hardware Error]: Machine check: Action required: unknown MCACOD doubly unhelpful when they check the manual for the reported IA32_MSR_STATUS.MCACOD and see that it is listed as one of the standard recoverable values. Add an extra rule to the MCE severity table to catch this case and report it as: mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel Fixes: b2f9d678 ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries") Signed-off-by:
-
Dan Williams authored
commit eab6870f upstream. Mark Rutland noticed that GCC optimization passes have the potential to elide necessary invocations of the array_index_mask_nospec() instruction sequence, so mark the asm() volatile. Mark explains: "The volatile will inhibit *some* cases where the compiler could lift the array_index_nospec() call out of a branch, e.g. where there are multiple invocations of array_index_nospec() with the same arguments: if (idx < foo) { idx1 = array_idx_nospec(idx, foo) do_something(idx1); } < some other code > if (idx < foo) { idx2 = array_idx_nospec(idx, foo); do_something_else(idx2); } ... since the compiler can determine that the two invocations yield the same result, and reuse the first result (likely the same register as idx was in originally) for the second branch, effectively re-writing the above as: if (idx < foo) { idx = array_idx_nospec(idx, foo); do_something(idx); } < some other code > if (idx < foo) { do_something_else(idx); } ... if we don't take the first branch, then speculatively take the second, we lose the nospec protection. There's more info on volatile asm in the GCC docs: https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile " Reported-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: babdde26 ("x86: Implement array_index_mask_nospec") Link: https://lkml.kernel.org/lkml/152838798950.14521.4893346294059739135.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
- 26 Jun, 2018 35 commits
-
-
Greg Kroah-Hartman authored
-
Thadeu Lima de Souza Cascardo authored
commit 5cc41e09 upstream. WHen registering a new binfmt_misc handler, it is possible to overflow the offset to get a negative value, which might crash the system, or possibly leak kernel data. Here is a crash log when 2500000000 was used as an offset: BUG: unable to handle kernel paging request at ffff989cfd6edca0 IP: load_misc_binary+0x22b/0x470 [binfmt_misc] PGD 1ef3e067 P4D 1ef3e067 PUD 0 Oops: 0000 [#1] SMP NOPTI Modules linked in: binfmt_misc kvm_intel ppdev kvm irqbypass joydev input_leds serio_raw mac_hid parport_pc qemu_fw_cfg parpy CPU: 0 PID: 2499 Comm: bash Not tainted 4.15.0-22-generic #24-Ubuntu Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 RIP: 0010:load_misc_binary+0x22b/0x470 [binfmt_misc] Call Trace: search_binary_handler+0x97/0x1d0 do_execveat_common.isra.34+0x667/0x810 SyS_execve+0x31/0x40 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Use kstrtoint instead of simple_strtoul. It will work as the code already set the delimiter byte to '\0' and we only do it when the field is not empty. Tested with offsets -1, 2500000000, UINT_MAX and INT_MAX. Also tested with examples documented at Documentation/admin-guide/binfmt-misc.rst and other registrations from packages on Ubuntu. Link: http://lkml.kernel.org/r/20180529135648.14254-1-cascardo@canonical.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michael S. Tsirkin authored
commit 670ae9ca upstream. struct vhost_msg within struct vhost_msg_node is copied to userspace. Unfortunately it turns out on 64 bit systems vhost_msg has padding after type which gcc doesn't initialize, leaking 4 uninitialized bytes to userspace. This padding also unfortunately means 32 bit users of this interface are broken on a 64 bit kernel which will need to be fixed separately. Fixes: CVE-2018-1118 Cc: stable@vger.kernel.org Reported-by:
Kevin Easton <kevin@guarana.org> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reported-by: syzbot+87cfa083e727a224754b@syzkaller.appspotmail.com Signed-off-by:
-
Even Xu authored
commit ebeaa367 upstream. Current ISH driver only registers suspend/resume PM callbacks which don't support hibernation (suspend to disk). Basically after hiberation, the ISH can't resume properly and user may not see sensor events (for example: screen rotation may not work). User will not see a crash or panic or anything except the following message in log: hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device So this patch adds support for S4/hiberbation to ISH by using the SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend and resume functions will now be used for both suspend to RAM and hibernation. If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend and resume related functions won't be used, so mark them as __maybe_unused to clarify that this is the intended behavior, and remove #ifdefs for power management. Cc: stable@vger.kernel.org Signed-off-by:
Even Xu <even.xu@intel.com> Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Martin Brandenburg authored
commit f6a4b4c9 upstream. As long as a symlink inode remains in-core, the destination (and therefore size) will not be re-fetched from the server, as it cannot change. The original implementation of the attribute cache assumed that setting the expiry time in the past was sufficient to cause a re-fetch of all attributes on the next getattr. That does not work in this case. The bug manifested itself as follows. When the command sequence touch foo; ln -s foo bar; ls -l bar is run, the output was lrwxrwxrwx. 1 fedora fedora 4906 Apr 24 19:10 bar -> foo However, after a re-mount, ls -l bar produces lrwxrwxrwx. 1 fedora fedora 3 Apr 24 19:10 bar -> foo After this commit, even before a re-mount, the output is lrwxrwxrwx. 1 fedora fedora 3 Apr 24 19:10 bar -> foo Reported-by:
Becky Ligon <ligon@clemson.edu> Signed-off-by:
Martin Brandenburg <martin@omnibond.com> Fixes: 71680c18 ("orangefs: Cache getattr results.") Cc: stable@vger.kernel.org Cc: hubcap@omnibond.com Signed-off-by:
Mike Marshall <hubcap@omnibond.com> Signed-off-by:
-
Stefan Potyra authored
commit 955bc613 upstream. According to the API, you may only call clk_get_rate() after actually enabling it. Found by Linux Driver Verification project (linuxtesting.org). Fixes: a5fd9139 ("w1: add 1-wire master driver for i.MX27 / i.MX31") Signed-off-by:
Stefan Potyra <Stefan.Potyra@elektrobit.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 2cfce3a8 upstream. Commit 184add2c ("libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs") disabled LPM for SanDisk SD7UB3Q*G1001 SSDs. This has lead to several reports of users of that SSD where LPM was working fine and who know have a significantly increased idle power consumption on their laptops. Likely there is another problem on the T450s from the original reporter which gets exposed by the uncore reaching deeper sleep states (higher PC-states) due to LPM being enabled. The problem as reported, a hardfreeze about once a day, already did not sound like it would be caused by LPM and the reports of the SSD working fine confirm this. The original reporter is ok with dropping the quirk. A X250 user has reported the same hard freeze problem and for him the problem went away after unrelated updates, I suspect some GPU driver stack changes fixed things. TL;DR: The original reporters problem were triggered by LPM but not an LPM issue, so drop the quirk for the SSD in question. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1583207 Cc: stable@vger.kernel.org Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Lorenzo Dalrio <lorenzo.dalrio@gmail.com> Reported-by:
Lorenzo Dalrio <lorenzo.dalrio@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
"Richard W.M. Jones" <rjones@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit 18c9a99b upstream. We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Fixes: 21334205 ("libata: handle power transition of ODD") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Colin Ian King authored
commit 795ef788 upstream. Don't populate the arrays cdb on the stack, instead make them static. Makes the object code smaller by 230 bytes: Before: text data bss dec hex filename 3797 240 0 4037 fc5 drivers/ata/libata-zpodd.o After: text data bss dec hex filename 3407 400 0 3807 edf drivers/ata/libata-zpodd.o Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Tao Wang authored
commit c7d1f119 upstream. If the policy limits are updated via cpufreq_update_policy() and subsequently via sysfs, the limits stored in user_policy may be set incorrectly. For example, if both min and max are set via sysfs to the maximum available frequency, user_policy.min and user_policy.max will also be the maximum. If a policy notifier triggered by cpufreq_update_policy() lowers both the min and the max at this point, that change is not reflected by the user_policy limits, so if the max is updated again via sysfs to the same lower value, then user_policy.max will be lower than user_policy.min which shouldn't happen. In particular, if one of the policy CPUs is then taken offline and back online, cpufreq_set_policy() will fail for it due to a failing limits check. To prevent that from happening, initialize the min and max fields of the new_policy object to the ones stored in user_policy that were previously set via sysfs. Signed-off-by:
Kevin Wangtao <kevin.wangtao@hisilicon.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Steve French authored
commit b2adf22f upstream. The server detects reconnect by the (non-zero) value in PreviousSessionId of SMB2/SMB3 SessionSetup request, but this behavior regressed due to commit 166cea4d ("SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup") CC: Stable <stable@vger.kernel.org> CC: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
-
Dennis Wassenberg authored
commit 7eef32c1 upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP ProBook 640 G4 Signed-off-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dennis Wassenberg authored
commit 2861751f upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP EliteBook 830 G5 Signed-off-by:
-
Bo Chen authored
commit a3aa60d5 upstream. When 'kzalloc()' fails in 'snd_hda_attach_pcm_stream()', a new pcm instance is created without setting its operators via 'snd_pcm_set_ops()'. Following operations on the new pcm instance can trigger kernel null pointer dereferences and cause kernel oops. This bug was found with my work on building a gray-box fault-injection tool for linux-kernel-module binaries. A kernel null pointer dereference was confirmed from line 'substream->ops->open()' in function 'snd_pcm_open_substream()' in file 'sound/core/pcm_native.c'. This patch fixes the bug by calling 'snd_device_free()' in the error handling path of 'kzalloc()', which removes the new pcm instance from the snd card before returns with an error code. Signed-off-by:
Bo Chen <chenbo@pdx.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Qu Wenruo authored
commit ac0b4145 upstream. [BUG] Btrfs can create compressed extent without checksum (even though it shouldn't), and if we then try to replace device containing such extent, the result device will contain all the uncompressed data instead of the compressed one. Test case already submitted to fstests: https://patchwork.kernel.org/patch/10442353/ [CAUSE] When handling compressed extent without checksum, device replace will goe into copy_nocow_pages() function. In that function, btrfs will get all inodes referring to this data extents and then use find_or_create_page() to get pages direct from that inode. The problem here is, pages directly from inode are always uncompressed. And for compressed data extent, they mismatch with on-disk data. Thus this leads to corrupted compressed data extent written to replace device. [FIX] In this attempt, we could just remove the "optimization" branch, and let unified scrub_pages() to handle it. Although scrub_pages() won't bother reusing page cache, it will be a little slower, but it does the correct csum checking and won't cause such data corruption caused by "optimization". Note about the fix: this is the minimal fix that can be backported to older stable trees without conflicts. The whole callchain from copy_nocow_pages() can be deleted, and will be in followup patches. Fixes: ff023aac ("Btrfs: add code to scrub to copy read data to another disk") CC: stable@vger.kernel.org # 4.4+ Reported-by:
James Harvey <jamespharvey20@gmail.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> [ remove code removal, add note why ] Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Omar Sandoval authored
commit fd4e994b upstream. If we have invalid flags set, when we error out we must drop our writer counter and free the buffer we allocated for the arguments. This bug is trivially reproduced with the following program on 4.7+: #include <fcntl.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/types.h> #include <linux/btrfs.h> #include <linux/btrfs_tree.h> int main(int argc, char **argv) { struct btrfs_ioctl_vol_args_v2 vol_args = { .flags = UINT64_MAX, }; int ret; int fd; if (argc != 2) { fprintf(stderr, "usage: %s PATH\n", argv[0]); return EXIT_FAILURE; } fd = open(argv[1], O_WRONLY); if (fd == -1) { perror("open"); return EXIT_FAILURE; } ret = ioctl(fd, BTRFS_IOC_RM_DEV_V2, &vol_args); if (ret == -1) perror("ioctl"); close(fd); return EXIT_SUCCESS; } When unmounting the filesystem, we'll hit the WARN_ON(mnt_get_writers(mnt)) in cleanup_mnt() and also may prevent the filesystem to be remounted read-only as the writer count will stay lifted. Fixes: 6b526ed7 ("btrfs: introduce device delete by devid") CC: stable@vger.kernel.org # 4.9+ Signed-off-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by:
-
Omar Sandoval authored
commit b5c40d59 upstream. In btrfs_clone_files(), we must check the NODATASUM flag while the inodes are locked. Otherwise, it's possible that btrfs_ioctl_setflags() will change the flags after we check and we can end up with a party checksummed file. The race window is only a few instructions in size, between the if and the locks which is: 3834 if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode)) 3835 return -EISDIR; where the setflags must be run and toggle the NODATASUM flag (provided the file size is 0). The clone will block on the inode lock, segflags takes the inode lock, changes flags, releases log and clone continues. Not impossible but still needs a lot of bad luck to hit unintentionally. Fixes: 0e7b824c ("Btrfs: don't make a file partly checksummed through file clone") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Tetsuo Handa authored
commit 84d0c27d upstream. syzbot is hitting WARN() at kernfs_add_one() [1]. This is because kernfs_create_link() is confused by previous device_add() call which continued without setting dev->kobj.parent field when get_device_parent() failed by memory allocation fault injection. Fix this by propagating the error from class_dir_create_and_add() to the calllers of get_device_parent(). [1] https://syzkaller.appspot.com/bug?id=fae0fb607989ea744526d1c082a5b8de6529116fSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+df47f81c226b31d89fb1@syzkaller.appspotmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jan Kara authored
commit 4f2f76f7 upstream. ext4_resize_fs() has an off-by-one bug when checking whether growing of a filesystem will not overflow inode count. As a result it allows a filesystem with 8192 inodes per group to grow to 64TB which overflows inode count to 0 and makes filesystem unusable. Fix it. Cc: stable@vger.kernel.org Fixes: 3f8a6411Reported-by:
Jaco Kroon <jaco@uls.co.za> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Lukas Czerner authored
commit eee597ac upstream. Currently in ext4_punch_hole we're going to skip the mtime update if there are no actual blocks to release. However we've actually modified the file by zeroing the partial block so the mtime should be updated. Moreover the sync and datasync handling is skipped as well, which is also wrong. Fix it. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Joe Habermann <joe.habermann@quantum.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jan Kara authored
commit 2ee3ee06 upstream. When ext4_ind_map_blocks() computes a length of a hole, it doesn't count with the fact that mapped offset may be somewhere in the middle of the completely empty subtree. In such case it will return too large length of the hole which then results in lseek(SEEK_DATA) to end up returning an incorrect offset beyond the end of the hole. Fix the problem by correctly taking offset within a subtree into account when computing a length of a hole. Fixes: facab4d9 CC: stable@vger.kernel.org Reported-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Kailang Yang authored
commit f429e7e4 upstream. Add new support for ALC257 codec. [ It's supposed to be almost equivalent with other ALC25x variants, just adding another type and id -- tiwai ] Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
-
Frank van der Linden authored
[ Upstream commit 4fd44a98 ] commit 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") introduced an optimization for the handling of child sockets created for a new TCP connection. But this optimization passes any data associated with the last ACK of the connection handshake up the stack without verifying its checksum, because it calls tcp_child_process(), which in turn calls tcp_rcv_state_process() directly. These lower-level processing functions do not do any checksum verification. Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to fix this. Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
Frank van der Linden <fllinden@amazon.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
Balbir Singh <bsingharora@gmail.com> Reviewed-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 8d499533 ] use nla_strlcpy() to avoid copying data beyond the length of TCA_DEF_DATA netlink attribute, in case it is less than SIMP_MAX_DATA and it does not end with '\0' character. v2: fix errors in the commit message, thanks Hangbin Liu Fixes: fa1b1cff ("net_cls_act: Make act_simple use of netlink policy.") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit 09757646 ] IPVS setups with local client and remote tunnel server need to create exception for the local virtual IP. What we do is to change PMTU from 64KB (on "lo") to 1460 in the common case. Suggested-by:
Martin KaFai Lau <kafai@fb.com> Fixes: 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Fixes: 7343ff31 ("ipv6: Don't create clones of host routes.") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
David Ahern <dsahern@gmail.com> Acked-by:
-
Xiangning Yu authored
[ Upstream commit eb55bbf8 ] There is a timing issue under active-standy mode, when bond_enslave() is called, bond->params.primary might not be initialized yet. Any time the primary slave string changes, bond->force_primary should be set to true to make sure the primary becomes the active slave. Signed-off-by:
Xiangning Yu <yuxiangning@gmail.com> Signed-off-by:
-
Daniel Glöckner authored
[ Upstream commit ebc3dd68 ] It has been observed that writing 0xF2 to the power register while it reads as 0xF4 results in the register having the value 0xF0, i.e. clearing RESUME and setting SUSPENDM in one go does not work. It might also violate the USB spec to transition directly from resume to suspend, especially when not taking T_DRSMDN into account. But this is what happens when a remote wakeup occurs between SetPortFeature USB_PORT_FEAT_SUSPEND on the root hub and musb_bus_suspend being called. This commit returns -EBUSY when musb_bus_suspend is called while remote wakeup is signalled and thus avoids to reset the RESUME bit. Ignoring this error when musb_port_suspend is called from musb_hub_control is ok. Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Liu Bo authored
[ Upstream commit 8810f751 ] There is a scenario that can end up with rebuild process failing to return good content, i.e. suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content, and users will think of this as data loss. More seriouly, if the loss happens on some important internal btree roots, it could refuse to mount. This extends btrfs to do more retries and each retry fails only one stripe. Since raid6 can tolerate 2 disk failures, if there is one more failure besides the failure on which we're recovering, this can always work. The worst case is to retry as many times as the number of raid6 disks, but given the fact that such a scenario is really rare in practice, it's still acceptable. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Eric Dumazet authored
commit 02db5571 upstream. While rcvbuf is properly clamped by tcp_rmem[2], rcvwin is left to a potentially too big value. It has no serious effect, since : 1) tcp_grow_window() has very strict checks. 2) window_clamp can be mangled by user space to any value anyway. tcp_init_buffer_space() and companions use tcp_full_space(), we use tcp_win_from_space() to avoid reloading sk->sk_rcvbuf Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Wei Wang <weiwan@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Sasha Levin authored
This reverts commit 186a6519. This commit used an incorrect log message. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Damien Thébault authored
[ Upstream commit a95691bc ] This patch adds support for the BCM5389 switch connected through MDIO. Signed-off-by:
Damien Thébault <damien.thebault@vitec.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Finn Thain authored
[ Upstream commit 26de0b76 ] With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the message, "DMA-API: device driver failed to check map error". Add the missing dma_mapping_error() call. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
João Paulo Rechi Vita authored
[ Upstream commit 32ffd6e8 ] Do not perform the rfkill cleanup routine when (asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since nothing is registered with the rfkill subsystem in that case. Doing so leads to the following kernel NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 PGD 1a3aa8067 PUD 1a3b3d067 PMD 0 Oops: 0002 [#1] PREEMPT SMP Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34 Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012 task: ffff8801a639ba00 task.stack: ffffc900014cc000 RIP: 0010:[<ffffffff816c7348>] [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP: 0018:ffffc900014cfce0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4 RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4 R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8 FS: 00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0 Stack: ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28 ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0 ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7 Call Trace: [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61 [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52 [<ffffffff816c73e7>] mutex_lock+0x17/0x30 [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi] [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi] [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi] [<ffffffff814a5128>] platform_drv_remove+0x28/0x40 [<ffffffff814a2901>] __device_release_driver+0xa1/0x160 [<ffffffff814a29e3>] device_release_driver+0x23/0x30 [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170 [<ffffffff8149e5a9>] device_del+0x139/0x270 [<ffffffff814a5028>] platform_device_del+0x28/0x90 [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30 [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi] [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi] [<ffffffff8110c692>] SyS_delete_module+0x192/0x270 [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0 [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00 RIP [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120 RSP <ffffc900014cfce0> CR2: 0000000000000000 ---[ end trace 8d484233fa7cb512 ]--- note: modprobe[3275] exited with preempt_count 2 https://bugzilla.kernel.org/show_bug.cgi?id=196467 Reported-by: red.f0xyz@gmail.com Signed-off-by:
João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Josh Hill authored
[ Upstream commit 2415f3bd ] Add support for Netgear Aircard 779S Signed-off-by:
Josh Hill <josh@joshuajhill.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Ivan Bornyakov authored
[ Upstream commit f9c6442a ] memcmp() returns int, but eprom_try_esi() cast it to unsigned char. One can lose significant bits and get 0 from non-0 value returned by the memcmp(). Signed-off-by:
Ivan Bornyakov <brnkv.i1@gmail.com> Signed-off-by:
-
