Pull RISC-V fixes from Palmer Dabbelt:

 - device tree updates for the Microsemi Polarfire development kit that
   fix some mismatches between the u-boot and Linux enternet entries

 - ensure that the F register state is correctly reflected in core dumps

* tag 'riscv-for-linus-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: dts: microchip: Add ethernet0 to the aliases node
  riscv: dts: microchip: Use 'local-mac-address' for emac1
  riscv: Ensure the value of FP registers in the core dump file is up to date

Pull MMC host fix from Ulf Hansson:

 - sdhci-iproc: Fix clock error for ACPI rpi's

* tag 'mmc-v5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  Revert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711"

Pull ARM fix from Russell King:
 "Resolve a Keystone 2 kernel mapping regression"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9104/2: Fix Keystone 2 kernel mapping regression

This reverts commit 419dd626.

It turned out that the change from the reverted commit breaks the ACPI
based rpi's because it causes the 100Mhz max clock to be overridden to the
return from sdhci_iproc_get_max_clock(), which is 0 because there isn't a
OF/DT based clock device.
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Fixes: 419dd626 ("mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711")
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull drm fixes from Dave Airlie:
 "Last set of fixes for 5.14, nothing major a couple of i915, couple of
  imx and a few amdgpu. All pretty small.

  i915:
   - Fix syncmap memory leak
   - Drop redundant display port debug print

  amdgpu:
   - Fix for pinning display buffers multiple times
   - Fix delayed work handling for GFXOFF
   - Fix build when CONFIG_SUSPEND is not set

  imx:
   - fix planar offset calculations
   - fix accidental partial revert"

* tag 'drm-fixes-2021-08-27' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/dp: Drop redundant debug print
  drm/i915: Fix syncmap memory leak
  drm/amdgpu: Fix build with missing pm_suspend_target_state module export
  drm/amdgpu: Cancel delayed work when GFXOFF is disabled
  drm/amdgpu: use the preferred pin domain after the check
  drm/imx: ipuv3-plane: fix accidental partial revert of 8 pixel alignment fix
  gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats

drm/imx: imx-drm alignment and plane offset fixes

Fix an accidental partial revert of commit 94dfec48 ("drm/imx: Add 8
pixel alignment fix") and plane offset calculations for capture of
non-aligned resolutions.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/85a41af99beb2c9e7d6020435a135bf9f205a5ff.camel@pengutronix.de

Merge tag 'amd-drm-fixes-5.14-2021-08-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.14-2021-08-25:

amdgpu:
- Fix for pinning display buffers multiple times
- Fix delayed work handling for GFXOFF
- Fix build when CONFIG_SUSPEND is not set
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826032658.4068-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2021-08-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix syncmap memory leak
- Drop redundant display port debug print
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YSfSeHbyS5wBZtNJ@intel.com

Pull nfsd fix from Bruce Fields:
 "This is a one-liner fix for a serious bug that can cause the server to
  become unresponsive to a client, so I think it's worth the last-minute
  inclusion for 5.14"

* tag 'nfsd-5.14-1' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: Fix XPT_BUSY flag leakage in svc_handle_xprt()...

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from can and bpf.

  Closing three hw-dependent regressions. Any fixes of note are in the
  'old code' category. Nothing blocking release from our perspective.

  Current release - regressions:

   - stmmac: revert "stmmac: align RX buffers"

   - usb: asix: ax88772: move embedded PHY detection as early as
     possible

   - usb: asix: do not call phy_disconnect() for ax88178

   - Revert "net: really fix the build...", from Kalle to fix QCA6390

  Current release - new code bugs:

   - phy: mediatek: add the missing suspend/resume callbacks

  Previous releases - regressions:

   - qrtr: fix another OOB Read in qrtr_endpoint_post

   - stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings

  Previous releases - always broken:

   - inet: use siphash in exception handling

   - ip_gre: add validation for csum_start

   - bpf: fix ringbuf helper function compatibility

   - rtnetlink: return correct error on changing device netns

   - e1000e: do not try to recover the NVM checksum on Tiger Lake"

* tag 'net-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
  Revert "net: really fix the build..."
  net: hns3: fix get wrong pfc_en when query PFC configuration
  net: hns3: fix GRO configuration error after reset
  net: hns3: change the method of getting cmd index in debugfs
  net: hns3: fix duplicate node in VLAN list
  net: hns3: fix speed unknown issue in bond 4
  net: hns3: add waiting time before cmdq memory is released
  net: hns3: clear hardware resource when loading driver
  net: fix NULL pointer reference in cipso_v4_doi_free
  rtnetlink: Return correct error on changing device netns
  net: dsa: hellcreek: Adjust schedule look ahead window
  net: dsa: hellcreek: Fix incorrect setting of GCL
  cxgb4: dont touch blocked freelist bitmap after free
  ipv4: use siphash instead of Jenkins in fnhe_hashfun()
  ipv6: use siphash in rt6_exception_hash()
  can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
  net: usb: asix: ax88772: fix boolconv.cocci warnings
  net/sched: ets: fix crash when flipping from 'strict' to 'quantum'
  qede: Fix memset corruption
  net: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdp
  ...

Pull arm64 fix from Will Deacon:
 "We received a report this week that the generic version of
  pfn_valid(), which we switched to this merge window in 16c9afc7
  ("arm64/mm: drop HAVE_ARCH_PFN_VALID"), interacts badly with
  dma_map_resource() due to the following check:

        /* Don't allow RAM to be mapped */
        if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
                return DMA_MAPPING_ERROR;

  Since the ongoing saga to determine the semantics of pfn_valid() is
  unlikely to be resolved this week (does it indicate valid memory, or
  just the presence of a struct page, or whether that struct page has
  been initialised?), just revert back to our old version of pfn_valid()
  for 5.14.

  Summary:

   - Fix dma_map_resource() by reverting back to old pfn_valid() code"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Partially revert "arm64/mm: drop HAVE_ARCH_PFN_VALID"

Pull ceph fixes from Ilya Dryomov:
 "Two memory management fixes for the filesystem"

* tag 'ceph-for-5.14-rc8' of git://github.com/ceph/ceph-client:
  ceph: fix possible null-pointer dereference in ceph_mdsmap_decode()
  ceph: correctly handle releasing an embedded cap flush

This reverts commit ce78ffa3.

Wren and Nicolas reported that ath11k was failing to initialise QCA6390
Wi-Fi 6 device with error:

qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22

Commit ce78ffa3 ("net: really fix the build..."), introduced in
v5.14-rc5, caused this regression in qrtr. Most likely all ath11k
devices are broken, but I only tested QCA6390. Let's revert the broken
commit so that ath11k works again.
Reported-by: Wren Turkal <wt@penguintechs.org>
Reported-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210826172816.24478-1-kvalo@codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull btrfs fix from David Sterba:
 "One more fix that I think qualifies for a late merge. It's a revert of
  a one-liner fix that meanwhile got backported to stable kernels and we
  got reports from users.

  The broken fix prevents creating compressed inline extents, which
  could be noticeable on space consumption.

  Technically it's a regression as the patch was merged in 5.14-rc1 but
  got propagated to several stable kernels and has higher exposure than
  a 'typical' development cycle bug"

* tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Revert "btrfs: compression: don't try to compress if we don't have enough pages"

Alexei Starovoitov says:

====================
bpf 2021-08-26

We've added 1 non-merge commit during the last 1 day(s):

1) Fix ringbuf helper function compatibility, from Daniel.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Fix ringbuf helper function compatibility
====================

Link: https://lore.kernel.org/r/20210826153720.19083-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================

Link: https://lore.kernel.org/r/1629976921-43438-1-git-send-email-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, when query PFC configuration by dcbtool, driver will return
PFC enable status based on TC. As all priorities are mapped to TC0 by
default, if TC0 is enabled, then all priorities mapped to TC0 will be
shown as enabled status when query PFC setting, even though some
priorities have never been set.

for example:
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off
$ dcb pfc set dev eth0 prio-pfc 0:on 1:on 2:on 3:on
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:on 1:on 2:on 3:on 4:on 5:on 6:on 7:on

To fix this problem, just returns user's PFC config parameter saved in
driver.

Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The GRO configuration is enabled by default after reset. This
is incorrect and should be restored to the user-configured value.
So this restoration is added during reset initialization.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, the cmd index is obtained in debugfs by comparing file names.
However, this method may cause errors when processing more complex file
names. So, change this method by saving cmd in private data and comparing
it when getting cmd index in debugfs for optimization.

Fixes: 5e69ea7e ("net: hns3: refactor the debugfs process")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

VLAN list should not be added duplicate VLAN node, otherwise it would
cause "add failed" when restore VLAN from VLAN list, so this patch adds
VLAN ID check before adding node into VLAN list.

Fixes: c6075b19 ("net: hns3: Record VF vlan tables")
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In bond 4, when the link goes down and up repeatedly, the bond may get an
unknown speed, and then this port can not work.

The driver notify netif_carrier_on() before update the link state, when the
bond receive carrier on, will query the speed of the port, if the query
operation happens before updating the link state, will get an unknown
speed. So need to notify netif_carrier_on() after update the link state.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

After the cmdq registers are cleared, the firmware may take time to
clear out possible left over commands in the cmdq. Driver must release
cmdq memory only after firmware has completed processing of left over
commands.

Fixes: 232d0d55 ("net: hns3: uninitialize command queue while unloading PF driver")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If a PF is bonded to a virtual machine and the virtual machine exits
unexpectedly, some hardware resource cannot be cleared. In this case,
loading driver may cause exceptions. Therefore, the hardware resource
needs to be cleared when the driver is loaded.

Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drm_dp_dpcd_read/write already has debug error message.
Drop redundant error messages which gives false
status even if correct value is read in drm_dp_dpcd_read().

v2: -Added fixes tag (Ankit)
v3: -Fixed build error (CI)

Fixes: 9488a030 ("drm/i915: Add support for enabling link status and recovery")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812131107.5531-1-swati2.sharma@intel.com
(cherry picked from commit b6dfa416)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

A small race exists between intel_gt_retire_requests_timeout and
intel_timeline_exit which could result in the syncmap not getting
free'd. Rather than work to hard to seal this race, simply cleanup the
syncmap on fini.

unreferenced object 0xffff88813bc53b18 (size 96):
  comm "gem_close_race", pid 5410, jiffies 4294917818 (age 1105.600s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 0a 00 00 00  ................
    00 00 00 00 00 00 00 00 6b 6b 6b 6b 06 00 00 00  ........kkkk....
  backtrace:
    [<00000000120b863a>] __sync_alloc_leaf+0x1e/0x40 [i915]
    [<00000000042f6959>] __sync_set+0x1bb/0x240 [i915]
    [<0000000090f0e90f>] i915_request_await_dma_fence+0x1c7/0x400 [i915]
    [<0000000056a48219>] i915_request_await_object+0x222/0x360 [i915]
    [<00000000aaac4ee3>] i915_gem_do_execbuffer+0x1bd0/0x2250 [i915]
    [<000000003c9d830f>] i915_gem_execbuffer2_ioctl+0x405/0xce0 [i915]
    [<00000000fd7a8e68>] drm_ioctl_kernel+0xb0/0xf0 [drm]
    [<00000000e721ee87>] drm_ioctl+0x305/0x3c0 [drm]
    [<000000008b0d8986>] __x64_sys_ioctl+0x71/0xb0
    [<0000000076c362a4>] do_syscall_64+0x33/0x80
    [<00000000eb7a4831>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 531958f6 ("drm/i915/gt: Track timeline activeness in enter/exit")
Cc: <stable@vger.kernel.org>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730195342.110234-1-matthew.brost@intel.com
(cherry picked from commit faf89098)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:

  BUG: kernel NULL pointer dereference, address:
  ...
  RIP: 0010:cipso_v4_doi_free+0x3a/0x80
  ...
  Call Trace:
   netlbl_cipsov4_add_std+0xf4/0x8c0
   netlbl_cipsov4_add+0x13f/0x1b0
   genl_family_rcv_msg_doit.isra.15+0x132/0x170
   genl_rcv_msg+0x125/0x240

This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.

This patch just add the check to prevent panic happen for similar
cases.
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when device is moved between network namespaces using
RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID,
IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and
target namespace already has device with same name, userspace will get
EINVAL what is confusing and makes debugging harder.

Fix it so that userspace gets more appropriate EEXIST instead what makes
debugging much easier.

Before:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: Invalid argument

After:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: File exists

The problem is that do_setlink() passes its `char *ifname` argument,
that it gets from a caller, to __dev_change_net_namespace() as is (as
`const char *pat`), but semantics of ifname and pat can be different.

For example, __rtnl_newlink() does this:

net/core/rtnetlink.c
    3270	char ifname[IFNAMSIZ];
     ...
    3286	if (tb[IFLA_IFNAME])
    3287		nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
    3288	else
    3289		ifname[0] = '\0';
     ...
    3364	if (dev) {
     ...
    3394		return do_setlink(skb, dev, ifm, extack, tb, ifname, status);
    3395	}

, i.e. do_setlink() gets ifname pointer that is always valid no matter
if user specified IFLA_IFNAME or not and then do_setlink() passes this
ifname pointer as is to __dev_change_net_namespace() as pat argument.

But the pat (pattern) in __dev_change_net_namespace() is used as:

net/core/dev.c
   11198	err = -EEXIST;
   11199	if (__dev_get_by_name(net, dev->name)) {
   11200		/* We get here if we can't use the current device name */
   11201		if (!pat)
   11202			goto out;
   11203		err = dev_get_valid_name(net, dev, pat);
   11204		if (err < 0)
   11205			goto out;
   11206	}

As the result the `goto out` path on line 11202 is neven taken and
instead of returning EEXIST defined on line 11198,
__dev_change_net_namespace() returns an error from dev_get_valid_name()
and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier.

Fixes: d8a5ec67 ("[NET]: netlink support for moving devices between network namespaces.")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kurt Kanzenbach says:

====================
net: dsa: hellcreek: 802.1Qbv Fixes

while using TAPRIO offloading on the Hirschmann hellcreek switch, I've noticed
two issues in the current implementation:

1. The gate control list is incorrectly programmed
2. The admin base time is not set properly

Fix it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Traffic schedules can only be started up to eight seconds within the
future. Therefore, the driver periodically checks every two seconds whether the
admin base time provided by the user is inside that window. If so the schedule
is started. Otherwise the check is deferred.

However, according to the programming manual the look ahead window size should
be four - not eight - seconds. By using the proposed value of four seconds
starting a schedule at a specified admin base time actually works as expected.

Fixes: 24dfc6eb ("net: dsa: hellcreek: Add TAPRIO offloading support")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the gate control list which is programmed into the hardware is
incorrect resulting in wrong traffic schedules. The problem is the loop
variables are incremented before they are referenced. Therefore, move the
increment to the end of the loop.

Fixes: 24dfc6eb ("net: dsa: hellcreek: Add TAPRIO offloading support")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When adapter init fails, the blocked freelist bitmap is already freed
up and should not be touched. So, move the bitmap zeroing closer to
where it was successfully allocated. Also handle adapter init failure
unwind path immediately and avoid setting up RDMA memory windows.

Fixes: 5b377d11 ("cxgb4: Add debugfs facility to inject FL starvation")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
inet: use siphash in exception handling

A group of security researchers brought to our attention
the weakness of hash functions used in rt6_exception_hash()
and fnhe_hashfun()

I made two distinct patches to help backports, since IPv6
part was added in 4.15
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A group of security researchers brought to our attention
the weakness of hash function used in fnhe_hashfun().

Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.

Also remove the inline keyword, this really is distracting.

Fixes: d546c621 ("ipv4: harden fnhe_hashfun()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

A group of security researchers brought to our attention
the weakness of hash function used in rt6_exception_hash()

Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.

Following patch deals with IPv4.

Fixes: 35732d01 ("ipv6: introduce a hash table to store dst cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.14-20210826' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine says:

====================
pull-request: can 2021-08-26

this is a pull request of a single patch for net/master.

Stefan Mätje's patch fixes the interchange of RX and TX error counters
inthe esd_usb2 CAN driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the interchanged fetch of the CAN RX and TX error
counters from the ESD_EV_CAN_ERROR_EXT message. The RX error counter
is really in struct rx_msg::data[2] and the TX error counter is in
struct rx_msg::data[3].

Fixes: 96d8e903 ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/20210825215227.4947-2-stefan.maetje@esd.eu
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/usb/asix_devices.c:757:60-65: WARNING: conversion to bool not needed here

 Remove unneeded conversion to bool

Semantic patch information:
 Relational and logical operators evaluate to bool,
 explicit conversion is overly verbose and unneeded.

Generated by: scripts/coccinelle/misc/boolconv.cocci

Fixes: 7a141e64 ("net: usb: asix: ax88772: move embedded PHY detection as early as possible")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210825183538.13070-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If the attempt to reserve a slot fails, we currently leak the XPT_BUSY
flag on the socket. Among other things, this make it impossible to close
the socket.

Fixes: 82011c80 ("SUNRPC: Move svc_xprt_received() call sites")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Merge fixes from Andrew Morton:
 "2 patches.

  Subsystems affected by this patch series: mm/memory-hotplug and
  MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: exfat: update my email address
  mm/memory_hotplug: fix potential permanent lru cache disable

My email address in exfat entry will be not available in a few days.
Update it to my own kernel.org address.

Link: https://lkml.kernel.org/r/20210825044833.16806-1-namjae.jeon@samsung.comSigned-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>