Add parsing of new device-tree battery bindings.

     - trickle-charge-current-microamp
     - precharge-upper-limit-microvolt
     - re-charge-voltage-microvolt
     - over-voltage-threshold-microvolt
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Add:

 - trickle-charge-current-microamp:

Some chargers have 3 charging stages. First one when battery is almost
empty is often called as trickle-charge. Last state when battery has been
"woken up" is usually called as fast-charge. In addition to this some
chargers have a 'middle state' which ROHM BD99954 data-sheet describes as
pre-charge. Some batteries can benefit from this 3-phase charging
[citation needed].

Introduce trickle-charge-current-microamp so that batteries can give
charging current limit for all three states.

 - precharge-upper-limit-microvolt:

When battery voltage has reached certain limit we change from
trickle-charge to next charging state (pre-charge for BD99954). Allow
battery to specify this limit.

 - re-charge-voltage-microvolt:

Allow giving a battery specific voltage limit for chargers which can
automatically re-start charging when battery has discharghed down to
this limit.

- over-voltage-threshold-microvolt

Allow specifying voltage threshold after which the battery is assumed to
be faulty.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Change the bd70528 to use common linear_range code instead of
implementing a copy of it in this driver.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

lib: Add linear ranges helper library and start using it

Series extracts a "linear ranges" helper out of the regulator
framework. Linear ranges helper is intended to help converting
real-world values to register values when conversion is linear. I
suspect this is useful also for power subsystem and possibly for clk.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Fix gcc '-Wunused-but-set-variable' warning:
drivers/power/reset/ltc2952-poweroff.c:97:16: warning: variable
‘overruns’ set but not used [-Wunused-but-set-variable]
  unsigned long overruns;
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

In the probe function, in case of error, resources allocated in
'lp8788_setup_adc_channel()' must be released.

This can be achieved easily by using the devm_ variant of
'iio_channel_get()'.
This has the extra benefit to simplify the remove function and to axe the
'lp8788_release_adc_channel()' function which is now useless.

Fixes: 98a27664 ("power_supply: Add new lp8788 charger driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Modern device tree bindings are supposed to be created as YAML-files
in accordance with dt-schema. This commit replaces SYSCON reboot-mode
legacy bare text bindings with YAML file. As before the bindings file
states that the corresponding dts node is supposed to be compatible
"syscon-reboot-mode" device and necessarily have an offset property
to determine which register from the regmap is supposed to keep the
mode on reboot.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Fix the following warning:

drivers/power/supply/cw2015_battery.c:96:5: warning:
'cw_update_profile' was not declared. Should it be static?
drivers/power/supply/cw2015_battery.c:712:1: warning:
'cw_bat_pm_ops' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: ChenTao <chentao107@huawei.com>
Acked-by: Tobias Schramm <t.schramm@manjaro.org>
Tested-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

We introduced some new locking here, but need to update the error
paths so they unlock before returning.

Fixes: 72d9cd9c ("power: bq25890: protect view of the chip's state")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Change the regulator helpers to use common linear_ranges code.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/64f01d5e381b8631a271616b7790f9d5640974fb.1588944082.git.matti.vaittinen@fi.rohmeurope.comSigned-off-by: Mark Brown <broonie@kernel.org>

Follow-up patches in this series will add a generic struct
linear_range. Rename bd70528 internal struct to avoid collision.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/286b1ae0adc1c08e7b644cbdc1a43eb2e0644647.1588944082.git.matti.vaittinen@fi.rohmeurope.comSigned-off-by: Mark Brown <broonie@kernel.org>

    Add a KUnit test for the linear_ranges helper.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/311fea741bafdcd33804d3187c1642e24275e3e5.1588944082.git.matti.vaittinen@fi.rohmeurope.comSigned-off-by: Mark Brown <broonie@kernel.org>

Many devices have control registers which control some measurable
property. Often a register contains control field so that change in
this field causes linear change in the controlled property. It is not
a rare case that user wants to give 'meaningful' control values and
driver needs to convert them to register field values. Even more
often user wants to 'see' the currently set value - again in
meaningful units - and driver needs to convert the values it reads
from register to these meaningful units. Examples of this include:

- regulators, voltage/current configurations
- power, voltage/current configurations
- clk(?) NCOs

and maybe others I can't think of right now.

Provide a linear_range helper which can do conversion from user value
to register value 'selector'.

The idea here is stolen from regulator framework and patches refactoring
the regulator helpers to use this are following.

Current implementation does not support inversely proportional ranges
but it might be useful if we could support also inversely proportional
ranges?
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/59259bc475e0c800eb4bb163f02528c7c01f7b3a.1588944082.git.matti.vaittinen@fi.rohmeurope.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add POWER_SUPPLY_TYPE to the uevent env for power supply. Type is a
property of all power supplies and there is a sysfs entry for it but it
is not included in the properties array of the power supply so
explicitly add it to the udev env.
Signed-off-by: Mathew King <mathewk@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Reduce the number of touch points to add a new enum property to the
power_supply class by mapping the array of text values to the device
attribute descriptor. A new enum property can now added by creating an
array with the text values named POWER_SUPPLY_${PROPNAME}_TEXT and
adding POWER_SUPPLY_ENUM_ATTR(${PROPNAME}) to the power_supply_attrs
array.
Signed-off-by: Mathew King <mathewk@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Use designated initializers for the sysfs power supply text values. This
will help ensure that the text values are kept in sync with the enum
values from power_supply.h.
Signed-off-by: Mathew King <mathewk@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Make the device attribute list used to create sysfs attributes more
robust by decoupling the list order from order of the enum defined in
power_supply.h. This is done by using a designated initializer in the
POWER_SUPPLY_ATTR macro.
Signed-off-by: Mathew King <mathewk@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Extend bq->lock over whole updating of the chip's state. Might get
useful later for switching ADC modes correctly.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

regmap initialization will check I2C adapter functionality.
Remove redundant check in the driver.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Property list should not change, so mark it const.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Driver rejects unknown chips early in the probe(), so when
bq25890_power_supply_get_property() is made reachable, bq->chip_version
will already be set to correct value - there is no need to check
it again.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Pull more btrfs fixes from David Sterba:
 "A few more stability fixes, minor build warning fixes and git url
  fixup:

   - fix partial loss of prealloc extent past i_size after fsync

   - fix potential deadlock due to wrong transaction handle passing via
     journal_info

   - fix gcc 4.8 struct intialization warning

   - update git URL in MAINTAINERS entry"

* tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  MAINTAINERS: btrfs: fix git repo URL
  btrfs: fix gcc-4.8 build warning for struct initializer
  btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info
  btrfs: fix partial loss of prealloc extent past i_size after fsync

Pull IOMMU fixes from Joerg Roedel:

 - Fix a memory leak when dev_iommu gets freed and a sub-pointer does
   not

 - Build dependency fixes for Mediatek, spapr_tce, and Intel IOMMU
   driver

 - Export iommu_group_get_for_dev() only for GPLed modules

 - Fix AMD IOMMU interrupt remapping when x2apic is enabled

 - Fix error path in the QCOM IOMMU driver probe function

* tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/qcom: Fix local_base status check
  iommu: Properly export iommu_group_get_for_dev()
  iommu/vt-d: Use right Kconfig option name
  iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
  iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config
  iommu/mediatek: Fix MTK_IOMMU dependencies
  iommu: Fix the memory leak in dev_iommu_free()

The git repo listed for btrfs hasn't been updated in over a year.
List the current one instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This patch adds a driver for the CellWise cw2015 fuel gauge.

The CellWise cw2015 is a shuntless, single-cell Li-Ion fuel gauge used
in the pine64 Pinebook Pro laptop and some Raspberry Pi UPS HATs.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This patch adds the dts binding schema for the cw2015 fuel gauge.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

In function power_supply_add_hwmon_sysfs(), psyhw->props is
allocated by bitmap_zalloc(). But this pointer is not deallocated
when devm_add_action fail,  which lead to a memory leak bug. To fix
this, we replace devm_add_action with devm_add_action_or_reset.

Cc: stable@kernel.org
Fixes: e67d4dfc ("power: supply: Add HWMON compatibility layer")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Pull power management fixes from Rafael Wysocki:

 - prevent the intel_pstate driver from printing excessive diagnostic
   messages in some cases (Chris Wilson)

 - make the hibernation restore kernel freeze kernel threads as well as
   user space tasks (Dexuan Cui)

 - fix the ACPI device PM disagnostic messages to include the correct
   power state name (Kai-Heng Feng).

* tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: ACPI: Output correct message on target power state
  PM: hibernate: Freeze kernel threads in software_resume()
  cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once

* pm-cpufreq:
  cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once

* pm-sleep:
  PM: hibernate: Freeze kernel threads in software_resume()

Pull iomap fix from Darrick Wong:
 "Hoist the check for an unrepresentable FIBMAP return value into
  ioctl_fibmap.

  The internal kernel function can handle 64-bit values (and is needed
  to fix a regression on ext4 + jbd2). It is only the userspace ioctl
  that is so old that it cannot deal"

* tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fibmap: Warn and return an error in case of block > INT_MAX

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - fix handling of backchannel binding in BIND_CONN_TO_SESSION

  Bugfixes:
   - Fix a credential use-after-free issue in pnfs_roc()
   - Fix potential posix_acl refcnt leak in nfs3_set_acl
   - defer slow parts of rpc_free_client() to a workqueue
   - Fix an Oopsable race in __nfs_list_for_each_server()
   - Fix trace point use-after-free race
   - Regression: the RDMA client no longer responds to server disconnect
     requests
   - Fix return values of xdr_stream_encode_item_{present, absent}
   - _pnfs_return_layout() must always wait for layoutreturn completion

  Cleanups:
   - Remove unreachable error conditions"

* tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix a race in __nfs_list_for_each_server()
  NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION
  SUNRPC: defer slow parts of rpc_free_client() to a workqueue.
  NFSv4: Remove unreachable error condition due to rpc_run_task()
  SUNRPC: Remove unreachable error condition
  xprtrdma: Fix use of xdr_stream_encode_item_{present, absent}
  xprtrdma: Fix trace point use-after-free race
  xprtrdma: Restore wake-up-all to rpcrdma_cm_event_handler()
  nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl
  NFS/pnfs: Fix a credential use-after-free issue in pnfs_roc()
  NFS/pnfs: Ensure that _pnfs_return_layout() waits for layoutreturn completion

Pull dmaengine fixes from Vinod Koul:
 "Core:
   - Documentation typo fixes
   - fix the channel indexes
   - dmatest: fixes for process hang and iterations

  Drivers:
   - hisilicon: build error fix without PCI_MSI
   - ti-k3: deadlock fix
   - uniphier-xdmac: fix for reg region
   - pch: fix data race
   - tegra: fix clock state"

* tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dmatest: Fix process hang when reading 'wait' parameter
  dmaengine: dmatest: Fix iteration non-stop logic
  dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization
  dmaengine: fix channel index enumeration
  dmaengine: mmp_tdma: Reset channel error on release
  dmaengine: mmp_tdma: Do not ignore slave config validation errors
  dmaengine: pch_dma.c: Avoid data race between probe and irq handler
  dt-bindings: dma: uniphier-xdmac: switch to single reg region
  include/linux/dmaengine: Typos fixes in API documentation
  dmaengine: xilinx_dma: Add missing check for empty list
  dmaengine: ti: k3-psil: fix deadlock on error path
  dmaengine: hisilicon: Fix build error without PCI_MSI

Convert the power_supply.txt to power-supply.yaml.
This conversion entailed fixing up the binding to being yaml and dt
checker compliant.

Added a note in the power_supply.txt to reference the power-supply.yaml
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Pull VFIO fixes from Alex Williamson:

 - copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao)

 - Fix a potential math overflow (Yan Zhao)

 - Use follow_pfn() for calculating PFNMAPs (Sean Christopherson)

* tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()
  vfio: avoid possible overflow in vfio_iommu_type1_pin_pages
  vfio: checking of validity of user vaddr in vfio_dma_rw

Pull arm64 fix from Catalin Marinas:
 "Add -fasynchronous-unwind-tables to the vDSO CFLAGS"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: vdso: Add -fasynchronous-unwind-tables to cflags

Pull io_uring fixes from Jens Axboe:

 - Fix for statx not grabbing the file table, making AT_EMPTY_PATH fail

 - Cover a few cases where async poll can handle retry, eliminating the
   need for an async thread

 - fallback request busy/free fix (Bijan)

 - syzbot reported SQPOLL thread exit fix for non-preempt (Xiaoguang)

 - Fix extra put of req for sync_file_range (Pavel)

 - Always punt splice async. We'll improve this for 5.8, but wanted to
   eliminate the inode mutex lock from the non-blocking path for 5.7
   (Pavel)

* tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
  io_uring: punt splice async because of inode mutex
  io_uring: check non-sync defer_list carefully
  io_uring: fix extra put in sync_file_range()
  io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()
  io_uring: use proper references for fallback_req locking
  io_uring: only force async punt if poll based retry can't handle it
  io_uring: enable poll retry for any file with ->read_iter / ->write_iter
  io_uring: statx must grab the file table for valid fd

Pull block fixes from Jens Axboe:
 "A few fixes for this release:

   - NVMe pull request from Christoph, with a single fix for a double
     free in the namespace error handling.

   - Kill the bd_openers check in blk_drop_partitions(), fixing a
     regression in this merge window (Christoph)"

* tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
  block: remove the bd_openers checks in blk_drop_partitions
  nvme: prevent double free in nvme_alloc_ns() error handling

Pull i2c fixes from Wolfram Sang:
 "Three driver bugfixes, and two reverts because the original patches
  revealed underlying problems which the Tegra guys are now working on"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: aspeed: Avoid i2c interrupt status clear race condition.
  i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
  Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"
  Revert "i2c: tegra: Synchronize DMA before termination"
  i2c: iproc: generate stop event for slave writes