- 05 Mar, 2014 40 commits
-
-
Paul Mackerras authored
commit 573ebfa6 upstream. The new ELFv2 little-endian ABI increases the stack redzone -- the area below the stack pointer that can be used for storing data -- from 288 bytes to 512 bytes. This means that we need to allow more space on the user stack when delivering a signal to a 64-bit process. To make the code a bit clearer, we define new USER_REDZONE_SIZE and KERNEL_REDZONE_SIZE symbols in ptrace.h. For now, we leave the kernel redzone size at 288 bytes, since increasing it to 512 bytes would increase the size of interrupt stack frames correspondingly. Gcc currently only makes use of 288 bytes of redzone even when compiling for the new little-endian ABI, and the kernel cannot currently be compiled with the new ABI anyway. In the future, hopefully gcc will provide an option to control the amount of redzone used, and then we could reduce it even more. This also changes the code in arch_compat_alloc_user_space() to preserve the expanded redzone. It is not clear why this function would ever be used on a 64-bit process, though. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Trond Myklebust authored
commit 9eb2ddb4 upstream. Fix a race in which the RPC client is shutting down while the gss daemon is processing a downcall. If the RPC client manages to shut down before the gss daemon is done, then the struct gss_auth used in gss_release_msg() may have already been freed. Link: http://lkml.kernel.org/r/1392494917.71728.YahooMailNeo@web140002.mail.bf1.yahoo.comReported-by:
John <da_audiophile@yahoo.com> Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 06ea0bfe upstream. When a send failure occurs due to the socket being out of buffer space, we call xs_nospace() in order to have the RPC task wait until the socket has drained enough to make it worth while trying again. The current patch fixes a race in which the socket is drained before we get round to setting up the machinery in xs_nospace(), and which is reported to cause hangs. Link: http://lkml.kernel.org/r/20140210170315.33dfc621@notabene.brown Fixes: a9a6b52e (SUNRPC: Don't start the retransmission timer...) Reported-by:
Neil Brown <neilb@suse.com> Signed-off-by:
-
Lars-Peter Clausen authored
commit 548da08f upstream. The codec->control_data contains a pointer to the device's regmap struct. But wm8994_bulk_write() expects a pointer to the parent wm8998 device. The issue was introduced in commit d9a7666f ("ASoC: Remove ASoC-specific WM8994 I/O code"). Fixes: d9a7666f ("ASoC: Remove ASoC-specific WM8994 I/O code") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Takashi Iwai authored
commit 025c3fa9 upstream. Preset EQ enum of sta32x codec driver declares too many number of items and it may lead to the access over the actual array size. Use SOC_ENUM_SINGLE_DECL() helper and it's automatically fixed. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by:
-
Takashi Iwai authored
commit b3619b28 upstream. There is a typo in the Limiter2 Release Rate control, a wrong enum for Limiter1 is assigned. It must point to Limiter2. Spotted by a compile warning: In file included from sound/soc/codecs/sta32x.c:34:0: sound/soc/codecs/sta32x.c:223:29: warning: ‘sta32x_limiter2_release_rate_enum’ defined but not used [-Wunused-variable] static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum, ^ include/sound/soc.h:275:18: note: in definition of macro ‘SOC_ENUM_DOUBLE_DECL’ struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \ ^ sound/soc/codecs/sta32x.c:223:8: note: in expansion of macro ‘SOC_ENUM_SINGLE_DECL’ static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum, ^ Signed-off-by:
-
Lars-Peter Clausen authored
commit 70ff00f8 upstream. codec->control_data contains a pointer to the regmap struct of the device, not to the device private data. Use snd_soc_codec_get_drvdata() instead. The issue was introduced in commit 29fdf4fb ("ASoC: sta32x: Convert to regmap"). Fixes: 29fdf4fb (ASoC: sta32x: Convert to regmap) Signed-off-by:
-
Mark Brown authored
commit 75306820 upstream. The driver reads from the DC offset control registers during callibration but since the registers are marked as volatile and there is a register cache the values will not be read from the hardware after the first reading rendering the callibration ineffective. It appears that the driver was originally written for the ASoC level register I/O code but converted to regmap prior to merge and this issue was missed during the conversion as the framework level volatile register functionality was not being used. Signed-off-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
-
Takashi Iwai authored
commit 7a6c0a58 upstream. wm8770 codec driver defines ain_enum with a wrong number of items. Use SOC_ENUM_DOUBLE_DECL() macro and it's automatically fixed. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by:
-
Dylan Reid authored
commit c42c8922 upstream. Sync regcache when entering STANDBY from OFF. ON isn't entered with OFF as the current state, so the registers were not being re-synced after suspend/resume. The 98088 and 98095 already call regcache_sync from STANDBY. Signed-off-by:
Dylan Reid <dgreid@chromium.org> Signed-off-by:
-
Alexander Shiyan authored
commit 9febd494 upstream. This patch fixes a crash caused by commit 3bed3344 (ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource()). This is an attempt to assign "drvdata->base" while memory for "drvdata" is not already allocated. Fixes: 3bed3344 (ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource()) Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
-
Adam Thomson authored
commit 07b0e5b1 upstream. Currently the I2C device Ids conflict for the MFD and CODEC so cannot be both instantiated on one platform. This patch updates the Ids and names to make them unique from each other. It should be noted that the I2C addresses for both PMIC and CODEC are modifiable so instantiation of the two are kept as separate devices, rather than instantiating the CODEC from the MFD code. Signed-off-by:
-
Andrew Honig authored
commit a08d3b3b upstream. The problem occurs when the guest performs a pusha with the stack address pointing to an mmio address (or an invalid guest physical address) to start with, but then extending into an ordinary guest physical address. When doing repeated emulated pushes emulator_read_write sets mmio_needed to 1 on the first one. On a later push when the stack points to regular memory, mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0. As a result, KVM exits to userspace, and then returns to complete_emulated_mmio. In complete_emulated_mmio vcpu->mmio_cur_fragment is incremented. The termination condition of vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved. The code bounces back and fourth to userspace incrementing mmio_cur_fragment past it's buffer. If the guest does nothing else it eventually leads to a a crash on a memcpy from invalid memory address. However if a guest code can cause the vm to be destroyed in another vcpu with excellent timing, then kvm_clear_async_pf_completion_queue can be used by the guest to control the data that's pointed to by the call to cancel_work_item, which can be used to gain execution. Fixes: f78146b0Signed-off-by:
Andrew Honig <ahonig@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
commit dff6efc3 upstream. Currently notify_change directly updates i_version for size updates, which not only is counter to how all other fields are updated through struct iattr, but also breaks XFS, which need inode updates to happen under its own lock, and synchronized to the structure that gets written to the log. Remove the update in the common code, and it to btrfs and ext4, XFS already does a proper updaste internally and currently gets a double update with the existing code. IMHO this is 3.13 and -stable material and should go in through the XFS tree. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Acked-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Tejun Heo authored
commit 532de3fc upstream. Currently, there's nothing preventing cgroup_enable_task_cg_lists() from missing set PF_EXITING and race against cgroup_exit(). Depending on the timing, cgroup_exit() may finish with the task still linked on css_set leading to list corruption. Fix it by grabbing siglock in cgroup_enable_task_cg_lists() so that PF_EXITING is guaranteed to be visible. This whole on-demand cg_list optimization is extremely fragile and has ample possibility to lead to bugs which can cause things like once-a-year oops during boot. I'm wondering whether the better approach would be just adding "cgroup_disable=all" handling which disables the whole cgroup rather than tempting fate with this on-demand craziness. Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Tejun Heo authored
commit 48573a89 upstream. cgroup_cfts_commit() walks the cgroup hierarchy that the target subsystem is attached to and tries to apply the file changes. Due to the convolution with inode locking, it can't keep cgroup_mutex locked while iterating. It currently holds only RCU read lock around the actual iteration and then pins the found cgroup using dget(). Unfortunately, this is incorrect. Although the iteration does check cgroup_is_dead() before invoking dget(), there's nothing which prevents the dentry from going away inbetween. Note that this is different from the usual css iterations where css_tryget() is used to pin the css - css_tryget() tests whether the css can be pinned and fails if not. The problem can be solved by simply holding cgroup_mutex instead of RCU read lock around the iteration, which actually reduces LOC. Signed-off-by:
-
Tejun Heo authored
commit b58c8998 upstream. cgroup_create() was returning 0 after allocation failures. Fix it. Signed-off-by:
-
Tejun Heo authored
commit eb46bf89 upstream. When cgroup_mount() fails to allocate an id for the root, it didn't set ret before jumping to unlock_drop ending up returning 0 after a failure. Fix it. Signed-off-by:
-
Hui Wang authored
commit 1de7ca5e upstream. The front headphone and mic jackes on a HP desktop model (Vendor Id: 0x111d76c7 Subsystem Id: 0x103c2b17) can not work, the codec on this machine has 8 physical ports, 6 of them are routed to rear jackes and all of them work very well, while the remaining 2 ports are routed to front headphone and mic jackes, but the corresponding pin complex node are not defined correctly. After apply this fix, the front audio jackes can work very well. [trivial fix of enum definition by tiwai] BugLink: https://bugs.launchpad.net/bugs/1282369 Cc: David Henningsson <david.henningsson@canonical.com> Tested-by:
Gerald Yang <gerald.yang@canonical.com> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Hsin-Yu Chao authored
commit 13c12dbe upstream. Incorrect ADC is picked in ca0132_capture_pcm_prepare(), where it assumes multiple streams while there is one stream per ADC. Note that ca0132_capture_pcm_cleanup() already does the right thing. The Chromebook Pixel has a microphone under the keyboard that is attached to node id 0x8. Before this fix, recording would always go to the main internal mic (node id 0x7). Signed-off-by:
Hsin-Yu Chao <hychao@chromium.org> Reviewed-by:
-
Hsin-Yu Chao authored
commit 28fba950 upstream. When a HDMI stream is opened with the same stream tag as a following opened stream to ca0132, audio will be heard from two ports simultaneously. Fix this issue by change to use snd_hda_codec_setup_stream and snd_hda_codec_cleanup_stream instead, so that an inactive stream can be marked as 'dirty' when found with a conflict stream tag, and then get purified. Signed-off-by:
Chih-Chung Chang <chihchung@chromium.org> Signed-off-by:
-
Clemens Ladisch authored
commit 624aef49 upstream. When the driver tries to access Function Unit 10, the KEF X300A speakers' firmware apparently locks up, making even PCM streaming impossible. Work around this by ignoring this FU. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Andy Adamson authored
commit 146d70ca upstream. Do not return an error when nfs4_copy_delegation_stateid succeeds. Signed-off-by:
Andy Adamson <andros@netapp.com> Link: http://lkml.kernel.org/r/1392737765-41942-1-git-send-email-andros@netapp.com Fixes: ef1820f9 (NFSv4: Don't try to recover NFSv4 locks when...) Cc: NeilBrown <neilb@suse.de> Signed-off-by:
-
Olivier Langlois authored
commit f78bccd7 upstream. rtl8192ce is disabling for too long the local interrupts during hw initiatialisation when performing scans The observable symptoms in dmesg can be: - underruns from ALSA playback - clock freezes (tstamps do not change for several dmesg entries until irqs are finaly reenabled): [ 250.817669] rtlwifi:rtl_op_config():<0-0-0> 0x100 [ 250.817685] rtl8192ce:_rtl92ce_phy_set_rf_power_state():<0-1-0> IPS Set eRf nic enable [ 250.817732] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817796] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.817910] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818024] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818139] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818253] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818367] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:18051d59:11 [ 250.818472] rtl8192ce:_rtl92ce_init_mac():<0-1-0> reg0xec:98053f15:10 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtl8192c_common:rtl92c_download_fw():<0-1-0> Firmware Version(49), Signature(0x88c1),Size(32) [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> PairwiseEncAlgorithm = 0 GroupEncAlgorithm = 0 [ 250.818472] rtl8192ce:rtl92ce_enable_hw_security_config():<0-1-0> The SECR-value cc [ 250.818472] rtl8192c_common:rtl92c_dm_check_txpower_tracking_thermal_meter():<0-1-0> Schedule TxPowerTracking direct call!! [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> rtl92c_dm_txpower_tracking_callback_thermalmeter [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial pathA ele_d reg0xc80 = 0x40000000, ofdm_index=0xc [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Initial reg0xa24 = 0x90e1317, cck_index=0xc, ch14 0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> Readback Thermal Meter = 0xe pre thermal meter 0xf eeprom_thermalmeter 0xf delta 0x1 delta_lck 0x0 delta_iqk 0x0 [ 250.818472] rtl8192c_common:rtl92c_dm_txpower_tracking_callback_thermalmeter():<0-1-0> <=== [ 250.818472] rtl8192c_common:rtl92c_dm_initialize_txpower_tracking_thermalmeter():<0-1-0> pMgntInfo->txpower_tracking = 1 [ 250.818472] rtl8192ce:rtl92ce_led_control():<0-1-0> ledaction 3 [ 250.818472] rtl8192ce:rtl92ce_sw_led_on():<0-1-0> LedAddr:4E ledpin=1 [ 250.818472] rtlwifi:rtl_ips_nic_on():<0-1-0> before spin_unlock_irqrestore [ 251.154656] PCM: Lost interrupts? [Q]-0 (stream=0, delta=15903, new_hw_ptr=293408, old_hw_ptr=277505) The exact code flow that causes that is: 1. wpa_supplicant send a start_scan request to the nl80211 driver 2. mac80211 module call rtl_op_config with IEEE80211_CONF_CHANGE_IDLE 3. rtl_ips_nic_on is called which disable local irqs 4. rtl92c_phy_set_rf_power_state() is called 5. rtl_ps_enable_nic() is called and hw_init()is executed and then the interrupts on the device are enabled A good solution could be to refactor the code to avoid calling rtl92ce_hw_init() with the irqs disabled but a quick and dirty solution that has proven to work is to reenable the irqs during the function rtl92ce_hw_init(). I think that it is safe doing so since the device interrupt will only be enabled after the init function succeed. Signed-off-by:
Olivier Langlois <olivier@trillion01.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Olivier Langlois authored
commit 2e8c5e56 upstream. rtl_ps_enable_nic() is called from loops that will loop until this function returns true or a maximum number of retries is performed. hw_init() returns non-zero on error. In that situation return false to restore the original design intent to retry hw init when it fails. Signed-off-by:
-
Stanislaw Gruszka authored
commit b6213e41 upstream. This patch fixes regression caused by commit a16dad77 "MIPS: Fix potencial corruption". That commit fixes one corruption scenario in cost of adding another one, which actually start to cause crashes on Yeeloong laptop when rtl8187 driver is used. For correct DMA read operation on machines without DMA coherence, kernel have to invalidate cache, such it will refill later with new data that device wrote to memory, when that data is needed to process. We can only invalidate full cache line. Hence when cache line includes both dma buffer and some other data (written in cache, but not yet in main memory), the other data can not hit memory due to invalidation. That happen on rtl8187 where struct rtl8187_priv fields are located just before and after small buffers that are passed to USB layer and DMA is performed on them. To fix the problem we align buffers and reserve space after them to make them match cache line. This patch does not resolve all possible MIPS problems entirely, for that we have to assure that we always map cache aligned buffers for DMA, what can be complex or even not possible. But patch fixes visible and reproducible regression and seems other possible corruptions do not happen in practice, since Yeeloong laptop works stable without rtl8187 driver. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=54391Reported-by:
Petr Pisar <petr.pisar@atlas.cz> Bisected-by:
Tom Li <biergaizi2009@gmail.com> Reported-and-tested-by:
Stanislaw Gruszka <stf_xl@wp.pl> Acked-by:
Larry Finger <Larry.Finger@lwfinger.next> Acked-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by:
-
Pavel Shilovsky authored
commit 2365c4ea upstream. SMB3 servers can respond with MaxTransactSize of more than 4M that can cause a memory allocation error returned from kmalloc in a lock codepath. Also the client doesn't support multicredit requests now and allows buffer sizes of 65536 bytes only. Set MaxTransactSize to this maximum supported value. Signed-off-by:
Pavel Shilovsky <piastry@etersoft.ru> Acked-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Jeff Layton authored
commit 5d81de8e upstream. It's possible for userland to pass down an iovec via writev() that has a bogus user pointer in it. If that happens and we're doing an uncached write, then we can end up getting less bytes than we expect from the call to iov_iter_copy_from_user. This is CVE-2014-0069 cifs_iovec_write isn't set up to handle that situation however. It'll blindly keep chugging through the page array and not filling those pages with anything useful. Worse yet, we'll later end up with a negative number in wdata->tailsz, which will confuse the sending routines and cause an oops at the very least. Fix this by having the copy phase of cifs_iovec_write stop copying data in this situation and send the last write as a short one. At the same time, we want to avoid sending a zero-length write to the server, so break out of the loop and set rc to -EFAULT if that happens. This also allows us to handle the case where no address in the iovec is valid. [Note: Marking this for stable on v3.4+ kernels, but kernels as old as v2.6.38 may have a similar problem and may need similar fix] Reviewed-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Chen Gang authored
commit 8d80390c upstream. For avr32 cross compiler, do not define '__linux__' internally, so it will cause issue with allmodconfig. The related error: CC [M] fs/coda/psdev.o In file included from include/linux/coda.h:64, from fs/coda/psdev.c:45: include/uapi/linux/coda.h:221: error: expected specifier-qualifier-list before 'u_quad_t' The related toolchain version (which only download, not re-compile): [root@gchen linux-next]# /upstream/toolchain/download/avr32-gnu-toolchain-linux_x86/bin/avr32-gcc -v Using built-in specs. Target: avr32 Configured with: /data2/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/src/gcc/configure --target=avr32 --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-languages=c,c++ --disable-nls --disable-libssp --disable-libstdcxx-pch --with-dwarf2 --enable-version-specific-runtime-libs --disable-shared --enable-doc --with-mpfr-lib=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/lib --with-mpfr-include=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/include --with-gmp=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --with-mpc=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-__cxa_atexit --disable-shared --with-newlib --with-pkgversion=AVR_32_bit_GNU_Toolchain_3.4.2_435 --with-bugurl=http://www .atmel.com/avr Thread model: single gcc version 4.4.7 (AVR_32_bit_GNU_Toolchain_3.4.2_435) Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Acked-by:
Hans-Christian Egtvedt <hegtvedt@cisco.com> Signed-off-by:
-
Paul Gortmaker authored
commit 5745d6a4 upstream. Causing this: In file included from arch/avr32/boards/mimc200/fram.c:13: include/linux/miscdevice.h:51: error: field 'list' has incomplete type include/linux/miscdevice.h:55: error: expected specifier-qualifier-list before 'mode_t' arch/avr32/boards/mimc200/fram.c:42: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Acked-by:
Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
-
Dan Carpenter authored
commit 92e3b405 upstream. If start_this_handle() fails then it leads to a use after free of "handle". Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Gavin Shan authored
commit 5b2e198e upstream. When doing reset in order to recover the affected PE, we issue hot reset on PE primary bus if it's not root bus. Otherwise, we issue hot or fundamental reset on root port or PHB accordingly. For the later case, we didn't cover the situation where PE only includes root port and it potentially causes kernel crash upon EEH error to the PE. The patch reworks the logic of EEH reset to improve the code readability and also avoid the kernel crash. Reported-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
-
Kevin Hao authored
commit 1a18a664 upstream. Guenter Roeck has got the following call trace on a p2020 board: Kernel stack overflow in process eb3e5a00, r1=eb79df90 CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 task: eb3e5a00 ti: c0616000 task.ti: ef440000 NIP: c003a420 LR: c003a410 CTR: c0017518 REGS: eb79dee0 TRAP: 0901 Not tainted (3.13.0-rc8-juniper-00146-g19eca00) MSR: 00029000 <CE,EE,ME> CR: 24008444 XER: 00000000 GPR00: c003a410 eb79df90 eb3e5a00 00000000 eb05d900 00000001 65d87646 00000000 GPR08: 00000000 020b8000 00000000 00000000 44008442 NIP [c003a420] __do_softirq+0x94/0x1ec LR [c003a410] __do_softirq+0x84/0x1ec Call Trace: [eb79df90] [c003a410] __do_softirq+0x84/0x1ec (unreliable) [eb79dfe0] [c003a970] irq_exit+0xbc/0xc8 [eb79dff0] [c000cc1c] call_do_irq+0x24/0x3c [ef441f20] [c00046a8] do_IRQ+0x8c/0xf8 [ef441f40] [c000e7f4] ret_from_except+0x0/0x18 --- Exception: 501 at 0xfcda524 LR = 0x10024900 Instruction dump: 7c781b78 3b40000a 3a73b040 543c0024 3a800000 3b3913a0 7ef5bb78 48201bf9 5463103a 7d3b182e 7e89b92e 7c008146 <3ba00000> 7e7e9b78 48000014 57fff87f Kernel panic - not syncing: kernel stack overflow CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 Call Trace: The reason is that we have used the wrong register to calculate the ksp_limit in commit cbc9565e (powerpc: Remove ksp_limit on ppc64). Just fix it. As suggested by Benjamin Herrenschmidt, also add the C prototype of the function in the comment in order to avoid such kind of errors in the future. Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
Pekon Gupta authored
commit 980386d2 upstream. Fixes: commit 75d3625e ARM: OMAP2+: gpmc: add DT bindings for OneNAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for ONENAND driver to probe later. However this does not happen if generic MTD_ONENAND framework is built as module (CONFIG_MTD_ONENAND=m). Therefore, when MTD/ONENAND and MTD/ONENAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board ONENAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_ONENAND=y || CONFIG_MTD_ONENAND=m Signed-off-by:
Pekon Gupta <pekon@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Pekon Gupta authored
commit 6b187b21 upstream. Fixes: commit bc6b1e7b ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for NAND driver to probe later. However this does not happen if generic MTD_NAND framework is built as module (CONFIG_MTD_NAND=m). Therefore, when MTD/NAND and MTD/NAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board NAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_NAND=y || CONFIG_MTD_NAND=m Signed-off-by:
-
Vinayak Kale authored
commit 39544ac9 upstream. Add DSB after icache flush to complete the cache maintenance operation. Signed-off-by:
Vinayak Kale <vkale@apm.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Will Deacon authored
commit 7c8746a9 upstream. When unlocking a spinlock, we require the following, strictly ordered sequence of events: <barrier> /* dmb */ <unlock> <barrier> /* dsb */ <sev> Whilst the code does indeed reflect this in terms of the architecture, the final <barrier> + <sev> have been contracted into a single inline asm without a "memory" clobber, therefore the compiler is at liberty to reorder the unlock to the end of the above sequence. In such a case, a waiting CPU may be woken up before the lock has been unlocked, leading to extremely poor performance. This patch reworks the dsb_sev() function to make use of the dsb() macro and ensure ordering against the unlock. Reported-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Will Deacon authored
commit bae0ca2b upstream. During __v{6,7}_setup, we invalidate the TLBs since we are about to enable the MMU on return to head.S. Unfortunately, without a subsequent dsb instruction, the invalidation is not guaranteed to have completed by the time we write to the sctlr, potentially exposing us to junk/stale translations cached in the TLB. This patch reworks the init functions so that the dsb used to ensure completion of cache/predictor maintenance is also used to ensure completion of the TLB invalidation. Reported-by:
Albin Tonnerre <Albin.Tonnerre@arm.com> Signed-off-by:
-
Marek Szyprowski authored
commit 10c8562f upstream. GFP_ATOMIC is not a single gfp flag, but a macro which expands to the other flags and LACK of __GFP_WAIT flag. To check if caller wanted to perform an atomic allocation, the code must test __GFP_WAIT flag presence. This patch fixes the issue introduced in v3.6-rc5 Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Theodore Ts'o authored
commit 19ea8060 upstream. If the i_crtime field is not present in the inode, don't leave the field uninitialized. Fixes: ef7f3835 ("ext4: Add nanosecond timestamps") Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Tested-by:
-
