- 26 Jul, 2022 13 commits
-
-
Mia Lin authored
Add real time clock support for NCT3018Y. Signed-off-by:
Mia Lin <mimi05633@gmail.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220713090647.8028-4-mimi05633@gmail.com
-
Mia Lin authored
Document devicetree bindings for the Nuvoton NCT3018Y Real Time Clock. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Alexander Stein authored
Convert the NXP PCF85063 RTC binding to DT schema format. Add 'interrupts' and 'wakeup-source' as this device has an interrupt which was not documented, but is in use. 'clock-output-names' and '#clock-cells' are added as well, those were probably missed when adding clkout support in commit 8c229ab6 ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework") Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Rob Herring authored
'trickle-voltage-millivolt' is missing a type definition. '-millivolt' is not a standard unit (should be '-microvolt'). As the property is already in use, add a type reference. Signed-off-by:
-
Mathew McBride authored
The 12/24hr flag in the RX-8035 can be found in the hour register, instead of the CTRL1 on the RX-8025. This was overlooked when support for the RX-8035 was added, and was causing read errors when the hour register 'overflowed'. To deal with the relevant register not always being visible in the relevant functions, determine the 12/24 mode at startup and store it in the driver state. Signed-off-by:
Mathew McBride <matt@traverse.com.au> Fixes: f120e2e3 ("rtc: rx8025: implement RX-8035 support") Cc: stable@vger.kernel.org Signed-off-by:
-
Uwe Kleine-König authored
When a remove platform device callback returns an error code, the driver core emits an error message ("remove callback returned a non-zero value. This will be ignored.\n") and still removes the device. As the driver already emits a more specific error message, return 0 to suppress the core's error message. This is a preparation for making platform remove callbacks return void. Signed-off-by:Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by:
-
Thomas Bogendoerfer authored
Commit d3164e2f ("MIPS: Remove VR41xx support") removed support for MIPS VR41xx platform, so remove exclusive drivers for this platform, too. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Tom Rix authored
cppcheck reports [drivers/rtc/rtc-mpfs.c:219]: (style) Variable 'pending' is assigned a value that is never used. The fetched CONTROL_REG stored in pending is unused and partially duplicates the functionality of the later call to mpfs_rtc_clear(). This looks like leftover development code, so remove pending. Fixes: 0b31d703 ("rtc: Add driver for Microchip PolarFire SoC") Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Yang Yingliang authored
Add the missing unlock before return from function rv8803_set_time() in the error handling case. Fixes: f8176e0b ("rtc: rv8803: initialize registers on post-probe voltage loss") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Srinivas Neeli authored
Zynqmp RTC controller has a calibration feature to compensate time deviation due to input clock inaccuracy. Set and get calibration API's are used for setting and getting calibration value from the controller calibration register. Signed-off-by:
Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by:
-
Srinivas Neeli authored
As per RTC spec default calibration value is 0x7FFF. We are in process to update the 0x7FFF as default value in the next version of TRM. Signed-off-by:
Peter Korsgaard <peter@korsgaard.com> Signed-off-by:
-
Srinivas Neeli authored
Added clock information and deprecated calibration support. Signed-off-by:
-
Icenowy Zheng authored
Allwinner R329 has a RTC with a similar time storage with H616 but a slightly different clock part. As we have already handled the R329 RTC clocks in the CCU driver, add a compatible string to RTC driver to allow probing of the RTC. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
Samuel Holland <samuel@sholland.org> Tested-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
- 24 Jun, 2022 15 commits
-
-
keliu authored
Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove() . Signed-off-by:
keliu <liuke94@huawei.com> Signed-off-by:
-
Nishanth Menon authored
Introduce support for Texas Instruments Real Time Clock controller on newer K3 family of SoCs such as AM62x. The hardware module that is being supported is the "digital only" version which doesn't have capability of external wakeup sources and external power backup. However, for many practical applications, this should suffice as RTC is operational across low power sequences. The hardware block by itself is split into two distinct domains internally to further reduce the power consumption with the actual counter block and comparators clocked off a 32k clock source (which based on SoC integration can be sourced by an external crystal) and an register interface block which is driven by the bus clock. While optimal from power perspective, it does create some complicated synchronizations and sequences that one must be wary of in the driver handling. Acked-by:
Andrew Davis <afd@ti.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Tested-by:
Georgi Vlaev <g-vlaev@ti.com> Signed-off-by:
-
Nishanth Menon authored
This adds the documentation for the devicetree bindings of the Texas Instruments RTC modules on K3 family of SoCs such as AM62x SoCs or newer. Signed-off-by:
-
Satya Priya authored
Update the maintainers section with latest mail ID. Signed-off-by:
Satya Priya <quic_c_skakit@quicinc.com> Signed-off-by:
-
Conor Dooley authored
Add an entry for PolarFire SoC's RTC drver to the existing support for PolarFire SoC. Signed-off-by:
-
Conor Dooley authored
Add support for the built-in RTC on Microchip PolarFire SoC Co-Developed-by:
Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by:
-
Stephen Kitt authored
All these drivers have an i2c probe function which doesn't use the "struct i2c_device_id *id" parameter, so they can trivially be converted to the "probe_new" style of probe with a single argument. This change was done using the following Coccinelle script, and fixed up for whitespace changes: @ rule1 @ identifier fn; identifier client, id; @@ - static int fn(struct i2c_client *client, const struct i2c_device_id *id) + static int fn(struct i2c_client *client) { ...when != id } @ rule2 depends on rule1 @ identifier rule1.fn; identifier driver; @@ struct i2c_driver driver = { - .probe + .probe_new = ( fn | - &fn + fn ) , }; Signed-off-by:Stephen Kitt <steve@sk2.org> Signed-off-by:
-
Tetsuo Handa authored
Commit 270a3bd6 ("rtc: make class.c explicitly non-modular") removed rtc_dev_exit() call. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Tetsuo Handa authored
Since "struct rtc_device" is per a device struct, I assume that clear_uie() needs to wait for only one work associated with that device. Therefore, wait for only that work using flush_work(). Signed-off-by:
-
Quentin Schulz authored
If an ISL1208 device does not have an interrupt line routed, the feature shouldn't be advertised (it is by default in rtc core) or it'll confuse userspace requesting that feature (such as hwclock from util-linux). Signed-off-by:
Quentin Schulz <quentin.schulz@theobroma-systems.com> Signed-off-by:
-
Allen-KH Cheng authored
Add mt6358 and mt6366 compatible in devicetree-binding document for MediaTek PMIC based RTC. mt6358 and mt6366 use same compatible data to store RTC_WRTGR address offset. mt6358-rtc should be used as fallback for mt6366-rtc. Signed-off-by:
Allen-KH Cheng <allen-kh.cheng@mediatek.com> Signed-off-by:
Yuchen Huang <yuchen.huang@mediatek.com> Acked-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Ahmad Fatoum authored
The reference manuals of both the RX8803 and RV8803 dictate that "[On V2F/VLF = ] all registers must be initialized". The RV-8803 application manual (rev. 1.6) further specifies that crossing V_LOW2 threshold enables flag V2F and triggers a Power-On reset. According to table 3.11 in the document, all control registers are defined to sensible values. However, The Epson RX-8803 doesn't offer the same guarantees. It explicitly states: During the initial power-up, the TEST bit is reset to "0" and the VLF bit is set to "1". ∗ At this point, all other register values are _undefined_, so be sure to perform a reset before using the module. Commit d3700b6b ("rtc: rv8803: Stop the clock while setting the time") also had this rationale: Indeed, all the registers must be initialized if the voltage has been lower than VLOW2 (triggering V2F), but not low enough to trigger a POR. We should follow the advice and initialize all applicable registers. We can group the registers into 3 groups: A) Already correctly handled registers: * 0B-0Ch | Timer Counter | unused and disabled by clearing TE in 0Dh * 0Dh | Extension Reg | already initialized in rv8803_regs_configure * 0Eh | Flag Reg | handled in IRQ handler, except for VLF, VDET * 0Eh | VLF, VDET | cleared in ->set_time * 10h | 100th Seconds | Already reset via RESET bit * 20-21h | Capture Buffer | holds timestamp unused by driver * 2Fh | Event Control | resets automatically B) Registers that are hardware initialized on POR, but not on VLF: * 0Fh | Control Reg * 2Ch | OSC Offset C) RAM that is undefined on voltage loss: * 00-06h | Date/Time * 07h | RAM * 08-0Ah | Alarm This means we should initialize after VLF the registers in group B (RV8803_CTRL and RV8803_OSC_OFFSET). Group C is all-zero after voltage loss on the RV-8803, but undefined on the RX-8803. This is ok for Date/Time because ->get_time returns an error code for as long as the voltage loss flag is active. It's cleared on ->set_time however. Zeroing both RAM and alarm ensures a fixed value is read afterwards. Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by:
-
Ahmad Fatoum authored
The driver probe currently initializes some registers to non-POR values. These values are not reinstated if the RTC experiences voltage loss later on. Fix this. Signed-off-by:
-
Ahmad Fatoum authored
The driver probe currently initializes some registers to non-POR values. These values are not reinstated if the RTC experiences voltage loss later on. Prepare for fixing this by factoring out the initialization to a separate function. Signed-off-by:
-
Mateusz Jończyk authored
Waiting 1ms every time is not necessary, for example on some AMD boxes the RTC_UIP bit is documented as being high for around 270 microseconds in some cases [1], which agreed with experiments on an SB710 southbridge. So 100us seems optimal. This in preparation for mach_get_cmos_time() refactoring. The functions mc146818_get_time() and mach_get_cmos_time() in arch/x86/kernel/rtc.c perform the same function and the code is duplicated. mach_get_cmos_time() is busy waiting for the RTC_UIP bit to clear, so make mc146818_get_time() more similar to it by reducing the polling period. [1] AMD SB700/710/750 Register Reference Guide, page 307, https://developer.amd.com/wordpress/media/2012/10/43009_sb7xx_rrg_pub_1.00.pdf "SB700 A12: The UIP high pulse is 270 μS Typical when SS on SRC clock is OFF and 100μ min when SRC SS is ON." [sic] Signed-off-by:
Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
- 06 Jun, 2022 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull file descriptor fix from Al Viro: "Fix for breakage in #work.fd this window" * tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the breakage in close_fd_get_file() calling conventions change
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull mm hotfixes from Andrew Morton: "Fixups for various recently-added and longer-term issues and a few minor tweaks: - fixes for material merged during this merge window - cc:stable fixes for more longstanding issues - minor mailmap and MAINTAINERS updates" * tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery x86/kexec: fix memory leak of elf header buffer mm/memremap: fix missing call to untrack_pfn() in pagemap_range() mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock() mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON MAINTAINERS: add maintainer information for z3fold mailmap: update Josh Poimboeuf's email
-
- 05 Jun, 2022 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull delay-accounting update from Andrew Morton: "A single featurette for delay accounting. Delayed a bit because, unusually, it had dependencies on both the mm-stable and mm-nonmm-stable queues" * tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: delayacct: track delays from write-protect copy
-
Linus Torvalds authored
The bluetooth code uses our bitmap infrastructure for the two bits (!) of connection setup flags, and in the process causes odd problems when it converts between a bitmap and just the regular values of said bits. It's completely pointless to do things like bitmap_to_arr32() to convert a bitmap into a u32. It shoudln't have been a bitmap in the first place. The reason to use bitmaps is if you have arbitrary number of bits you want to manage (not two!), or if you rely on the atomicity guarantees of the bitmap setting and clearing. The code could use an "atomic_t" and use "atomic_or/andnot()" to set and clear the bit values, but considering that it then copies the bitmaps around with "bitmap_to_arr32()" and friends, there clearly cannot be a lot of atomicity requirements. So just use a regular integer. In the process, this avoids the warnings about erroneous use of bitmap_from_u64() which were triggered on 32-bit architectures when conversion from a u64 would access two words (and, surprise, surprise, only one word is needed - and indeed overkill - for a 2-bit bitmap). That was always problematic, but the compiler seems to notice it and warn about the invalid pattern only after commit 0a97953f ("lib: add bitmap_{from,to}_arr64") changed the exact implementation details of 'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell. Fixes: fe92ee64 ("Bluetooth: hci_core: Rework hci_conn_params flags") Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/ Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/ Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by:
Yury Norov <yury.norov@gmail.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
It used to grab an extra reference to struct file rather than just transferring to caller the one it had removed from descriptor table. New variant doesn't, and callers need to be adjusted. Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com Fixes: 6319194e ("Unify the primitives for file descriptor closing") Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 SGX fix from Thomas Gleixner: "A single fix for x86/SGX to prevent that memory which is allocated for an SGX enclave is accounted to the wrong memory control group" * tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Set active memcg prior to shmem allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm cleanup from Thomas Gleixner: "Use PAGE_ALIGNED() instead of open coding it in the x86/mm code" * tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode updates from Thomas Gleixner: - Disable late microcode loading by default. Unless the HW people get their act together and provide a required minimum version in the microcode header for making a halfways informed decision its just lottery and broken. - Warn and taint the kernel when microcode is loaded late - Remove the old unused microcode loader interface - Remove a redundant perf callback from the microcode loader * tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Remove unnecessary perf callback x86/microcode: Taint and warn on late loading x86/microcode: Default-disable late loading x86/microcode: Rip out the OLD_INTERFACE
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cleanups from Thomas Gleixner: "A set of small x86 cleanups: - Remove unused headers in the IDT code - Kconfig indendation and comment fixes - Fix all 'the the' typos in one go instead of waiting for bots to fix one at a time" * tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix all occurences of the "the the" typo x86/idt: Remove unused headers x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot update from Thomas Gleixner: "Use strlcpy() instead of strscpy() in arch_setup()" * tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/setup: Use strscpy() to replace deprecated strlcpy()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull clockevent/clocksource updates from Thomas Gleixner: - Device tree bindings for MT8186 - Tell the kernel that the RISC-V SBI timer stops in deeper power states - Make device tree parsing in sp804 more robust - Dead code removal and tiny fixes here and there - Add the missing SPDX identifiers * tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check clocksource/drivers/timer-sun5i: Convert to SPDX identifier clocksource/drivers/timer-sun4i: Convert to SPDX identifier clocksource/drivers/pistachio: Convert to SPDX identifier clocksource/drivers/orion: Convert to SPDX identifier clocksource/drivers/lpc32xx: Convert to SPDX identifier clocksource/drivers/digicolor: Convert to SPDX identifier clocksource/drivers/armada-370-xp: Convert to SPDX identifier clocksource/drivers/mips-gic-timer: Convert to SPDX identifier clocksource/drivers/jcore: Convert to SPDX identifier clocksource/drivers/bcm_kona: Convert to SPDX identifier clocksource/drivers/sp804: Avoid error on multiple instances clocksource/drivers/riscv: Events are stopped during CPU suspend clocksource/drivers/ixp4xx: Drop boardfile probe path dt-bindings: timer: Add compatible for Mediatek MT8186
-
