- 09 Nov, 2020 7 commits
-
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/input/keyboard/nomadik-ske-keypad.c:71: warning: Function parameter or member 'pclk' not described in 'ske_keypad' drivers/input/keyboard/nomadik-ske-keypad.c:71: warning: Function parameter or member 'ske_keypad_lock' not described in 'ske_keypad' Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104162427.2984742-20-lee.jones@linaro.orgSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'input_dev' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'client' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'regmap' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'work' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'regulator' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'page' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'magnitude' not described in 'drv2667_data' drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'frequency' not described in 'drv2667_data' Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'input_dev' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'client' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'regmap' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'work' not described in 'drv2665_data' drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'regulator' not described in 'drv2665_data' Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'input_dev' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'client' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regmap' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'work' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'enable_gpio' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regulator' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'magnitude' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'mode' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'library' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'rated_voltage' not described in 'drv260x_data' drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'overdrive_voltage' not described in 'drv260x_data' drivers/input/misc/drv260x.c:244: warning: Function parameter or member 'voltage' not described in 'drv260x_calculate_voltage' Signed-off-by:
-
Wang Qing authored
Use kobj_to_dev() instead of container_of(). Signed-off-by:
Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1604893436-20206-1-git-send-email-wangqing@vivo.comSigned-off-by:
-
Jonathan Neuschäfer authored
The eKTF2132 is a touchscreen controller found, for example, in the Kobo Aura ebook reader. It is similar to the ektf2127, but it uses a different packet type to report touch events. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20201106112412.390724-3-j.neuschaefer@gmx.netSigned-off-by:
-
Jonathan Neuschäfer authored
The eKTF2132 is a touchscreen controller found, for example, in the Kobo Aura ebook reader. It is similar to the ektf2127, but it uses a different packet type to report touch events. Signed-off-by:
-
- 07 Oct, 2020 2 commits
-
-
Mika Penttilä authored
I am the author of this SiS touch driver, and willing to maintain and develop it further. Signed-off-by:
Mika Penttilä <mika.penttila@nextfour.com> Link: https://lore.kernel.org/r/20201007035108.58636-1-mika.penttila@nextfour.comSigned-off-by:
-
Kenny Levinsen authored
All evdev clients share a common waitgroup. On new input events, all clients waiting on this waitgroup are woken up, even those filtering out the events, possibly more than once per event. This leads to duplicated and unwanted wakeups. Split the shared waitgroup into per-client waitgroups for more fine-grained wakeups. Signed-off-by:
Kenny Levinsen <kl@kl.wtf> Link: https://lore.kernel.org/r/20200429184126.2155-1-kl@kl.wtfSigned-off-by:
-
- 05 Oct, 2020 5 commits
-
-
Hans de Goede authored
With the new RMI4 F3A support, we're now able to enable full RMI4 support for this model. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201005114919.371592-1-hdegoede@redhat.comSigned-off-by:
-
Jason A. Donenfeld authored
With the new RMI4 F3A support, we're now able to enable full RMI4 support for this model. We also tidy up the comments a bit, as the X1E is essentially the same computer as the P1. Acked-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20200930225046.173190-3-Jason@zx2c4.comSigned-off-by:
-
Jason A. Donenfeld authored
With the recent addition of the F3A support, we can now accept bootloader v8, which will help support recent Thinkpads. Acked-by:
-
Vincent Huang authored
RMI4 F3A supports the touchpad GPIO function, it's designed to support more GPIOs and used on newer touchpads. This patch adds support of the touchpad buttons. Signed-off-by:
Vincent Huang <vincent.huang@tw.synaptics.com> Reviewed-by:
Andrew Duggan <aduggan@synaptics.com> Link: https://lore.kernel.org/r/20200930094147.635556-3-vincent.huang@tw.synaptics.comSigned-off-by:
-
Vincent Huang authored
f30_data in rmi_device_platform_data could be also referenced by RMI function 3A, so rename it and the structure name to avoid confusion. Signed-off-by:
-
- 04 Oct, 2020 2 commits
-
-
Michael Srba authored
Add support for the bt541 touchscreen IC from zinitix, loosely based on downstream driver. The driver currently supports multitouch (5 touch points). The bt541 seems to support touch keys, but the support was not added because that functionality is not being utilized by the touchscreen used for testing. Based on the similartities between downstream drivers, it seems likely that other similar touchscreen ICs can be supported with this driver in the future. Signed-off-by:
Michael Srba <Michael.Srba@seznam.cz> Link: https://lore.kernel.org/r/20201001122949.16846-1-michael.srba@seznam.czSigned-off-by:
-
Michael Srba authored
This patch adds dts bindings for the zinitix bt541 touchscreen. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201001122949.16846-2-michael.srba@seznam.czSigned-off-by:
-
- 28 Sep, 2020 2 commits
-
-
Artur Rojek authored
Add a driver for joystick devices connected to ADC controllers supporting the Industrial I/O subsystem. Signed-off-by:
Artur Rojek <contact@artur-rojek.eu> Tested-by:
Paul Cercueil <paul@crapouillou.net> Tested-by:
Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200927123302.31062-2-contact@artur-rojek.euSigned-off-by:
-
Artur Rojek authored
Add documentation for the adc-joystick driver, used to provide support for joysticks connected over ADC. Signed-off-by:
-
- 16 Sep, 2020 8 commits
-
-
Krzysztof Kozlowski authored
platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: e443631d ("Input: serio - add support for Alwinner A10/A20 PS/2 controller") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200828145744.3636-4-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
platform_get_irq() returns -ERRNO on error. In such case casting to unsigned and comparing to 0 would pass the check. Fixes: 7abf38d6 ("Input: twl4030-keypad - add device tree support") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: f3a1ba60 ("Input: omap4-keypad - use platform device helpers") Signed-off-by:
-
Krzysztof Kozlowski authored
platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: 60214f05 ("Input: ep93xx_keypad - update driver to new core support") Signed-off-by:
-
YueHaibing authored
In stmfts_sysfs_hover_enable_write(), we should check value and sdata->hover_enabled is all true. Fixes: 78bcac7b ("Input: add support for the STMicroelectronics FingerTip touchscreen") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200916141941.16684-1-yuehaibing@huawei.comSigned-off-by:
-
Dmitry Torokhov authored
Open/close and resume/suspend paths are very similar, let's factor out common parts. Signed-off-by: -
Dan Carpenter authored
If imx6ul_tsc_init() fails then we need to clean up the clocks. I reversed the "if (input_dev->users) {" condition to make the code a bit simpler. Fixes: 6cc527b0 ("Input: imx6ul_tsc - propagate the errors") Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200905124942.GC183976@mwandaSigned-off-by:
-
Johnny Chuang authored
Fixed typo for command from 0xE0 to 0xD0. Fixes: cf520c64 ("Input: elants_i2c - provide an attribute to show calibration count") Signed-off-by:
Johnny Chuang <johnny.chuang.emc@gmail.com> Link: https://lore.kernel.org/r/1600238783-32303-1-git-send-email-johnny.chuang.emc@gmail.comSigned-off-by:
-
- 14 Sep, 2020 5 commits
-
-
Johnny Chuang authored
This patch adds a new behavior to report touch major resolution based on information provided by firmware. In initial process, driver acquires touch information from touch ic. It contains one byte about the resolution value of ABS_MT_TOUCH_MAJOR. Touch driver will report touch major resolution by this information. Signed-off-by:
Harry Cutts <hcutts@chromium.org> Link: https://lore.kernel.org/r/1598581195-9874-1-git-send-email-johnny.chuang.emc@gmail.comSigned-off-by:
-
Furquan Shaikh authored
On an AMD chromebook, where the same I2C bus is shared by both Raydium touchscreen and a trackpad device, it is observed that interleaving of I2C messages when `raydium_i2c_read_message()` is called leads to the Raydium touch IC reporting incorrect information. This is the sequence that was observed to result in the above issue: * I2C write to Raydium device for RM_CMD_BANK_SWITCH * I2C write to trackpad device * I2C read from trackpad device * I2C write to Raydium device for setting address * I2C read from Raydium device >>>> This provides incorrect information This change adds a new helper function `raydium_i2c_xfer()` that performs I2C transactions to the Raydium device. It uses the register address to decide if RM_CMD_BANK_SWITCH header needs to be sent to the device (i.e. if register address is greater than 255, then bank switch header is sent before the rest of the transaction). Additionally, it ensures that all the I2C operations performed as part of `raydium_i2c_xfer()` are done as a single i2c_transfer. This guarantees that no other transactions are initiated to any other device on the same bus in between. Additionally, `raydium_i2c_{send|read}*` functions are refactored to use this new helper function. Verified with the patch across multiple reboots (>100) that the information reported by the Raydium touchscreen device during probe is correct. Signed-off-by:Furquan Shaikh <furquan@google.com> Link: https://lore.kernel.org/r/20200821024006.3399663-1-furquan@google.comSigned-off-by:
-
Hans de Goede authored
Some 2-in-1s which use the soc_button_array driver have this ugly issue in their DSDT where the _LID method modifies the irq-type settings of the GPIOs used for the power and home buttons. The intend of this AML code is to disable these buttons when the lid is closed. The AML does this by directly poking the GPIO controllers registers. This is problematic because when re-enabling the irq, which happens whenever _LID gets called with the lid open (e.g. on boot and on resume), it sets the irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs the type to, and expects it to be, IRQ_TYPE_EDGE_BOTH. This commit adds a workaround for this which (on affected devices) does not set gpio_keys_button.gpio on these 2-in-1s, instead it gets the irq for the GPIO, configures it as IRQ_TYPE_LEVEL_LOW (to match how the _LID AML code configures it) and passes the irq in gpio_keys_button.irq. Signed-off-by:
-
Hans de Goede authored
According to the Microsoft documentation for Windows 8 convertible devices, these devices should implement a PNP0C60 "laptop/slate mode state indicator" ACPI device. This device can work in 2 ways, if there is a GPIO which directly indicates the device is in tablet-mode or not then the direct-gpio mode should be used. If there is no such GPIO, but instead the events are coming from e.g. the embedded-controller, then there should still be a PNP0C60 ACPI device and event-injection should be used to send the events. The drivers/platform/x86/intel-vbtn.c code is an example from a standardized manner of doing the latter. On various 2-in-1s with either a detachable keyboard, or with 360° hinges, the direct GPIO mode is indicated by an ACPI device with a HID of INT33D3, which contains a single GpioInt in its ACPI resource table, which directly indicates if the device is in tablet-mode or not. This commit adds support for this to the soc_button_array code, as well as for the alternative ID9001 HID which some devices use instead of the INT33D3 HID. Signed-off-by:
-
Hans de Goede authored
This is a preparation patch for adding support for Intel INT33D3 ACPI devices. These INT33D3 devices follow yet another Intel defined (but not documented) ACPI GPIO button standard. Unlike the ACPI GPIO button devices supported so far, the GPIO used in the INT33D3 devices is active-high, rather then active-low. This commit makes setting the gpio_keys_button.active_low flag configurable through the soc_button_info struct and enables it for all currently supported devices. Signed-off-by:
-
- 08 Sep, 2020 4 commits
-
-
Hans de Goede authored
Commit 696c6523 ("platform/x86: thinkpad_acpi: add mapping for new hotkeys") added support for a bunch of new hotkeys, but the clipping/snipping tool hotkey got ignored because there was no good key-code to map it to. Recently a new KEY_SELECTIVE_SCREENSHOT keycode was added by commit 3b059da9 ("Input: allocate keycode for "Selective Screenshot" key") quoting from the commit message: "New Chrome OS keyboards have a "snip" key that is basically a selective screenshot (allows a user to select an area of screen to be copied). Allocate a keycode for it." Support for this "snip" key seems like it is also a good match for the clipping/snipping tool hotkey, so map this hotkey to the new KEY_SELECTIVE_SCREENSHOT key-code. Reviewed-by:
Bastien Nocera <hadess@hadess.net> Acked-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Hans de Goede authored
New Lenovo Thinkpad models, e.g. the X1 Carbon 8th gen and the new T14 gen1 models have 3 new symbols / shortcuts on their F9-F11 keys (and the thinkpad_acpi driver receives 3 new hkey events for these): F9: Has a symbol resembling a rectangular speech balloon, the manual says the hotkey functions shows or hides the notification center F10: Has a symbol of a telephone horn which has been picked up from the receiver, the manual says: "Answer incoming calls" F11: Has a symbol of a telephone horn which is resting on the receiver, the manual says: "Decline incoming calls" And these Thinkpad models also send a new 0x1316 hkey events when the Fn + right Shift key-combo is pressed. This commit adds support for these 4 new hkey events. Acked-by: -
Hans de Goede authored
The last 2 generations of Lenovo Thinkpads send an acpi_thinkpad event when Fn + right shift is pressed. This is intended for use with "Lenovo Quick Clean" software, which disables the touchpad + kbd for 2 minutes on this key-combo so that healthcare workes can disinfect it. But there is no silkscreen print on the right-keyboard to indicate this, so add a KEY_FN_RIGHT_SHIFT keycode define to use for this key-combo. Signed-off-by:
-
Hans de Goede authored
New Lenovo Thinkpad models, e.g. the X1 Carbon 8th gen and the new T14 gen1 models have 3 new symbols / shortcuts on their F9-F11 keys (and the thinkpad_acpi driver receives 3 new "scancodes" for these): F9: Has a symbol resembling a rectangular speech balloon, the manual says the hotkey functions shows or hides the notification center F10: Has a symbol of a telephone horn which has been picked up from the receiver, the manual says: "Answer incoming calls" F11: Has a symbol of a telephone horn which is resting on the receiver, the manual says: "Decline incoming calls" We have no existing keycodes which are a good match for these, so add 3 new keycodes for these. I noticed that we have a hole in our keycodes between 0x1ba and 0x1c0 which does not seem to be reserved for any specific purpose, so these new 3 codes use 0x1bc - 0x1be, instead of starting at 0x27b. Acked-by:
-
- 25 Aug, 2020 1 commit
-
-
Joe Perches authored
Use semicolons and braces. Signed-off-by:
Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/02cb394f8c305473c1a783a5ea8425de79fe0ec1.1598331149.git.joe@perches.comSigned-off-by:
-
- 07 Aug, 2020 4 commits
-
-
Sebastian Reichel authored
Expose model and fw_version via sysfs. Also query the model in probe to make sure, that the I2C communication with the device works before successfully probing the driver. This is a bit complicated, since EETI devices do not have a sync interface. Sending the commands and directly reading does not work. Sending the command and waiting for some time is also not an option, since there might be touch events in the mean time. Last but not least we do not cache the results, since this interface can be used to check the I2C communication is still working as expected. Reviewed-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20200805160520.456570-5-sebastian.reichel@collabora.comSigned-off-by:
-
Sebastian Reichel authored
Add basic support for an optional reset gpio. Reviewed-by:
-
Sebastian Reichel authored
This adds support for EXC80H60 and EXCH84 controllers, which use a different event type id and have two extra bits for the resolution (so the maximum is 16K instead of 4K). Signed-off-by:
-
Sebastian Reichel authored
Convert the EETI EXC3000 binding to DT schema format using json-schema Signed-off-by:
-
