Turn them into proper sentences. Add comments to microcode_sanity_check() to
explain what it does.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1457345404-28884-5-git-send-email-bp@alien8.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge the two consecutive "if (ext_table_size)". No functional change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1457345404-28884-4-git-send-email-bp@alien8.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

sizeof(u32) is perfectly clear as it is.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1457345404-28884-3-git-send-email-bp@alien8.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Microcode checksum verification should be done using unsigned 32-bit
values otherwise the calculation overflow results in undefined
behaviour.

This is also nicely documented in the SDM, section "Microcode Update
Checksum":

  "To check for a corrupt microcode update, software must perform a
  unsigned DWORD (32-bit) checksum of the microcode update. Even though
  some fields are signed, the checksum procedure treats all DWORDs as
  unsigned. Microcode updates with a header version equal to 00000001H
  must sum all DWORDs that comprise the microcode update. A valid
  checksum check will yield a value of 00000000H."

but for some reason the code has been using ints from the very
beginning.

In practice, this bug possibly manifested itself only when doing the
microcode data checksum - apparently, currently shipped Intel microcode
doesn't have an extended signature table for which we do checksum
verification too.

  UBSAN: Undefined behaviour in arch/x86/kernel/cpu/microcode/intel_lib.c:105:12
  signed integer overflow:
  -1500151068 + -2125470173 cannot be represented in type 'int'
  CPU: 0 PID: 0 Comm: swapper Not tainted 4.5.0-rc5+ #495
  ...
  Call Trace:
   dump_stack
   ? inotify_ioctl
   ubsan_epilogue
   handle_overflow
   __ubsan_handle_add_overflow
   microcode_sanity_check
   get_matching_model_microcode.isra.2.constprop.8
   ? early_idt_handler_common
   ? strlcpy
   ? find_cpio_data
   load_ucode_intel_bsp
   load_ucode_bsp
   ? load_ucode_bsp
   x86_64_start_kernel

[ Expand and massage commit message. ]
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: hmh@hmh.eng.br
Link: http://lkml.kernel.org/r/1456834359-5132-1-git-send-email-chris.bainbridge@gmail.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

The patch was generated using fixed coccinelle semantic patch
scripts/coccinelle/api/memdup.cocci.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1455612202-14414-3-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Commit:

  a18a0f68 ("x86, microcode: Don't initialize microcode code on paravirt")

added a paravirt test in microcode_init(), primarily to avoid making
mc_bp_resume()->load_ucode_ap()->check_loader_disabled_ap() calls
because on 32-bit kernels this callchain ends up using __pa_nodebug()
macro which is invalid for Xen PV guests.

A subsequent commit:

  fbae4ba8 ("x86, microcode: Reload microcode on resume")

eliminated this callchain thus making a18a0f68 unnecessary.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: david.vrabel@citrix.com
Cc: konrad.wilk@oracle.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1455612202-14414-2-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Add some text and an example to Documentation/x86/early-microcode.txt
explaining how to build in microcode.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-18-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Before this, we issued this message from save_microcode_in_initrd()
which is called from free_initrd_mem(), i.e., only when we have an
initrd enabled. However, we can update from builtin microcode too but
then we don't issue the update message.

Fix it by issuing that message on the generic driver init path.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-17-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Reflow arguments, sort local variables in reverse christmas tree, kill
"out" label.

No functionality change.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-16-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

@cpu is unused, kill it.

No functionality change.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-15-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Rename it to mc_tmp_ptrs to denote better what it is - a temporary array
for saving pointers to microcode blobs. And "initrd" is not accurate
anymore since initrd is not the only source for early microcode.
Therefore, rename copy_initrd_ptrs() to copy_ptrs() simply and
"initrd_start" to "offset".

And then do the following convention: the global variable is called
"mc_tmp_ptrs" and the local function arguments "mc_ptrs" for
differentiation.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-14-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

... and drop the 32-bit casting games which we had to do at the time
because wrmsr() was unforgiving then, see c3fd0bd5e19a from the
full history tree:

  commit c3fd0bd5e19aaff9cdd104edff136a2023db657e
  Author: Linus Torvalds <torvalds@home.osdl.org>
  Date:   Tue Feb 17 23:23:41 2004 -0800

    Fix up the microcode update on regular 32-bit x86. Our wrmsr()
    is a bit unforgiving and really doesn't like 64-bit values.
    ...
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-13-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Get rid of local variable cpu_num as it is equal to @cpu now. Deref
cpu_data() only when it is really needed at the end.

No functionality change.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-12-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

If we're going to BUG_ON() because we're running on the wrong CPU, we
better do it as the first thing we do when entering that function. And
also, turn it into a WARN_ON() because it is not worth to panic the
system if we apply the microcode on the wrong CPU - we're simply going
to exit early.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-11-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Well, it is apparent what it points to - microcode. And since it is the
intel loader, no need for the "_intel" suffix. Use "!" for the 0/NULL
checks, while at it.

No functionality change.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-10-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

It is shorter and easier on the eyes. Change the "== 0" tests to "!..."
while at it.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-9-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

So it is always a head-twister when trying to stare at code which has a
bunch of

  struct mc_saved_data *mc_saved_data;

local function variables *and* a global mc_saved_data of the same name.

Rename all locals to "mcs" to differentiate from the global one.

No functionality change.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-8-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

It is supplied by pr_fmt already.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-7-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

This is especially annoying on large boxes:

  x86: Booting SMP configuration:
  .... node  #0, CPUs:          #1
  microcode: CPU1 microcode updated early to revision 0x428, date = 2014-05-29
     #2
  microcode: CPU2 microcode updated early to revision 0x428, date = 2014-05-29
     #3
  ...

so issue the update message only once.

$ grep microcode /proc/cpuinfo

shows whether every core got updated properly.
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-6-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

"uci" is an element of the ucode_cpu_info[] array, it can't be NULL.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/1454499225-21544-5-git-send-email-bp@alien8.de
Link: http://lkml.kernel.org/r/20140120103046.GC14233@elgon.mountainSigned-off-by: Ingo Molnar <mingo@kernel.org>

We do parse for the disable microcode loader chicken bit very early.
After the driver merge, the __setup() param parsing method is not needed
anymore so get rid of it.

In addition, fix a compiler warning from an old SLES11 gcc (4.3.4)
reported by Jan Beulich <jbeulich@suse.com>:

  arch/x86/kernel/cpu/microcode/core.c: In function ‘load_ucode_bsp’:
  arch/x86/kernel/cpu/microcode/core.c:96: warning: array subscript is above array bounds
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-4-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Set the initrd @start depending on the presence of an initrd. Otherwise,
builtin microcode loading doesn't work as the start is wrong and we're
using it to compute offset to the microcode blobs.
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 4.4
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-3-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Thomas Voegtle reported that doing oldconfig with a .config which has
CONFIG_MICROCODE enabled but BLK_DEV_INITRD disabled prevents the
microcode loading mechanism from being built.

So untangle it from the BLK_DEV_INITRD dependency so that oldconfig
doesn't turn it off and add an explanatory text to its Kconfig help what
the supported methods for supplying microcode are.
Reported-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 4.4
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-2-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull KVM fixes from Paolo Bonzini:
 "KVM-ARM fixes, mostly coming from the PMU work"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  arm64: KVM: Fix guest dead loop when register accessor returns false
  arm64: KVM: Fix comments of the CP handler
  arm64: KVM: Fix wrong use of the CPSR MODE mask for 32bit guests
  arm64: KVM: Obey RES0/1 reserved bits when setting CPTR_EL2
  arm64: KVM: Fix AArch64 guest userspace exception injection

Merge tag 'regmap-fix-v4.5-big-endian' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
 "A single revert back to v4.4 endianness handling.

  Commit 29bb45f2 ("regmap-mmio: Use native endianness for
  read/write") attempted to fix some long standing bugs in the MMIO
  implementation for big endian systems caused by duplicate byte
  swapping in both regmap and readl()/writel().  Sadly the fix makes
  things worse rather than better, so revert it for now"

* tag 'regmap-fix-v4.5-big-endian' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: mmio: Revert to v4.4 endianness handling

Fix the doubled "started" and tidy up the following sentences.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kvm-arm-for-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/ARM fixes for v4.5-rc2

A few random fixes, mostly coming from the PMU work by Shannon:

- fix for injecting faults coming from the guest's userspace
- cleanup for our CPTR_EL2 accessors (reserved bits)
- fix for a bug impacting perf (user/kernel discrimination)
- fix for a 32bit sysreg handling bug

Pull ARM SoC fixes from Olof Johansson:
 "The first real batch of fixes for this release cycle, so there are a
  few more than usual.

  Most of these are fixes and tweaks to board support (DT bugfixes,
  etc).  I've also picked up a couple of small cleanups that seemed
  innocent enough that there was little reason to wait (const/
  __initconst and Kconfig deps).

  Quite a bit of the changes on OMAP were due to fixes to no longer
  write to rodata from assembly when ARM_KERNMEM_PERMS was enabled, but
  there were also other fixes.

  Kirkwood had a bunch of gpio fixes for some boards.  OMAP had RTC
  fixes on OMAP5, and Nomadik had changes to MMC parameters in DT.

  All in all, mostly the usual mix of various fixes"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
  ARM: multi_v7_defconfig: enable DW_WATCHDOG
  ARM: nomadik: fix up SD/MMC DT settings
  ARM64: tegra: Add chosen node for tegra132 norrin
  ARM: realview: use "depends on" instead of "if" after prompt
  ARM: tango: use "depends on" instead of "if" after prompt
  ARM: tango: use const and __initconst for smp_operations
  ARM: realview: use const and __initconst for smp_operations
  bus: uniphier-system-bus: revive tristate prompt
  arm64: dts: Add missing DMA Abort interrupt to Juno
  bus: vexpress-config: Add missing of_node_put
  ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings
  ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux
  ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux
  ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency
  ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2
  ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address
  ARM: dts: LogicPD Torpedo: Revert Duplicative Entries
  ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types
  ARM: dts: am4372: fix irq type for arm twd and global timer
  ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
  ...

Pull mailbox fixes from Jassi Brar:

 - fix getting element from the pcc-channels array by simply indexing
   into it

 - prevent building mailbox-test driver for archs that don't have IOMEM

* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: Fix dependencies for !HAS_IOMEM archs
  mailbox: pcc: fix channel calculation in get_pcc_channel()

Pull USB fixes from Greg KH:
 "Here are some USB fixes for 4.5-rc3.

  The usual, xhci fixes for reported issues, combined with some small
  gadget driver fixes, and a MAINTAINERS file update.  All have been in
  linux-next with no reported issues"

* tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: harden xhci_find_next_ext_cap against device removal
  xhci: Fix list corruption in urb dequeue at host removal
  usb: host: xhci-plat: fix NULL pointer in probe for device tree case
  usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling
  usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT
  usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms
  usb: xhci: set SSIC port unused only if xhci_suspend succeeds
  usb: xhci: add a quirk bit for ssic port unused
  usb: xhci: handle both SSIC ports in PME stuck quirk
  usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.
  Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"
  MAINTAINERS: fix my email address
  usb: dwc2: Fix probe problem on bcm2835
  Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"
  usb: musb: ux500: Fix NULL pointer dereference at system PM
  usb: phy: mxs: declare variable with initialized value
  usb: phy: msm: fix error handling in probe.

Pull staging and IIO driver fixes from Greg KH:
 "Here are some IIO and staging driver fixes for 4.5-rc3.

  All of them, except one, are for IIO drivers, and one is for a speakup
  driver fix caused by some earlier patches, to resolve a reported build
  failure"

* tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Staging: speakup: Fix allyesconfig build on mn10300
  iio: dht11: Use boottime
  iio: ade7753: avoid uninitialized data
  iio: pressure: mpl115: fix temperature offset sign
  iio: imu: Fix dependencies for !HAS_IOMEM archs
  staging: iio: Fix dependencies for !HAS_IOMEM archs
  iio: adc: Fix dependencies for !HAS_IOMEM archs
  iio: inkern: fix a NULL dereference on error
  iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer.
  iio: light: acpi-als: Report data as processed
  iio: dac: mcp4725: set iio name property in sysfs
  iio: add HAS_IOMEM dependency to VF610_ADC
  iio: add IIO_TRIGGER dependency to STK8BA50
  iio: proximity: lidar: correct return value
  iio-light: Use a signed return type for ltr501_match_samp_freq()

Merge fixes from Andrew Morton:
 "22 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
  epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT
  radix-tree: fix oops after radix_tree_iter_retry
  MAINTAINERS: trim the file triggers for ABI/API
  dax: dirty inode only if required
  thp: make deferred_split_scan() work again
  mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
  ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
  um: asm/page.h: remove the pte_high member from struct pte_t
  mm, hugetlb: don't require CMA for runtime gigantic pages
  mm/hugetlb: fix gigantic page initialization/allocation
  mm: downgrade VM_BUG in isolate_lru_page() to warning
  mempolicy: do not try to queue pages from !vma_migratable()
  mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
  vmstat: make vmstat_update deferrable
  mm, vmstat: make quiet_vmstat lighter
  mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT
  memblock: don't mark memblock_phys_mem_size() as __init
  dump_stack: avoid potential deadlocks
  mm: validate_mm browse_rb SMP race condition
  m32r: fix build failure due to SMP and MMU
  ...

Pull Ceph fixes from Sage Weil:
 "We have a few wire protocol compatibility fixes, ports of a few recent
  CRUSH mapping changes, and a couple error path fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: MOSDOpReply v7 encoding
  libceph: advertise support for TUNABLES5
  crush: decode and initialize chooseleaf_stable
  crush: add chooseleaf_stable tunable
  crush: ensure take bucket value is valid
  crush: ensure bucket id is valid before indexing buckets array
  ceph: fix snap context leak in error path
  ceph: checking for IS_ERR instead of NULL

Pull drm fixes from Dave Airlie:
 "Fixes all over the place:

   - amdkfd: two static checker fixes
   - mst: a bunch of static checker and spec/hw interaction fixes
   - amdgpu: fix Iceland hw properly, and some fiji bugs, along with
     some write-combining fixes.
   - exynos: some regression fixes
   - adv7511: fix some EDID reading issues"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (38 commits)
  drm/dp/mst: deallocate payload on port destruction
  drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
  drm/dp/mst: move GUID storage from mgr, port to only mst branch
  drm/dp/mst: change MST detection scheme
  drm/dp/mst: Calculate MST PBN with 31.32 fixed point
  drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
  drm/mst: Add range check for max_payloads during init
  drm/mst: Don't ignore the MST PBN self-test result
  drm: fix missing reference counting decrease
  drm/amdgpu: disable uvd and vce clockgating on Fiji
  drm/amdgpu: remove exp hardware support from iceland
  drm/amdgpu: load MEC ucode manually on iceland
  drm/amdgpu: don't load MEC2 on topaz
  drm/amdgpu: drop topaz support from gmc8 module
  drm/amdgpu: pull topaz gmc bits into gmc_v7
  drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above
  drm/amdgpu: iceland use CI based MC IP
  drm/amdgpu: move gmc7 support out of CIK dependency
  drm/amdgpu/gfx7: enable cp inst/reg error interrupts
  drm/amdgpu/gfx8: enable cp inst/reg error interrupts
  ...

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are: a fix for a recently introduced false-positive warnings
  about PM domain pointers being changed inappropriately (harmless but
  annoying), an MCH size workaround quirk for one more platform, a
  compiler warning fix (generic power domains framework), an ACPI LPSS
  (Intel SoCs) driver fixup and a cleanup of the ACPI CPPC core code.

  Specifics:

   - PM core fix to avoid false-positive warnings generated when the
     pm_domain field is cleared for a device that appears to be bound to
     a driver (Rafael Wysocki).

   - New MCH size workaround quirk for Intel Haswell-ULT (Josh Boyer).

   - Fix for an "unused function" compiler warning in the generic power
     domains framework (Ulf Hansson).

   - Fixup for the ACPI driver for Intel SoCs (acpi-lpss) to set the PM
     domain pointer of a device properly in one place that was
     overlooked by a recent PM core update (Andy Shevchenko).

   - Removal of a redundant function declaration in the ACPI CPPC core
     code (Timur Tabi)"

* tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: Avoid false-positive warnings in dev_pm_domain_set()
  PM / Domains: Silence compiler warning for an unused function
  ACPI / CPPC: remove redundant mbox_send_message() declaration
  ACPI / LPSS: set PM domain via helper setter
  PNP: Add Haswell-ULT to Intel MCH size workaround

In the current implementation of the EPOLLEXCLUSIVE flag (added for
4.5-rc1), if epoll waiters create different POLL* sets and register them
as exclusive against the same target fd, the current implementation will
stop waking any further waiters once it finds the first idle waiter.
This means that waiters could miss wakeups in certain cases.

For example, when we wake up a pipe for reading we do:
wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if
one epoll set or epfd is added to pipe p with POLLIN and a second set
epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the
wakeup since the current implementation will stop after it finds any
intersection of events with a waiter that is blocked in epoll_wait().

We could potentially address this by requiring all epoll waiters that
are added to p be required to pass the same set of POLL* events.  IE the
first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL*
flags to be used by any other epfds that are added as EPOLLEXCLUSIVE.
However, I think it might be somewhat confusing interface as we would
have to reference count the number of users for that set, and so
userspace would have to keep track of that count, or we would need a
more involved interface.  It also adds some shared state that we'd have
store somewhere.  I don't think anybody will want to bloat
__wait_queue_head for this.

I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE
such that it can only be specified with EPOLLIN and/or EPOLLOUT.  So
that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop
once we hit the first idle waiter that specifies the EPOLLIN bit, since
any remaining waiters that only have 'POLLOUT' set wouldn't need to be
woken.  Likewise, we can do the same thing if 'POLLOUT' is in the wakeup
bit set and not 'POLLIN'.  If both 'POLLOUT' and 'POLLIN' are set in the
wake bit set (there is at least one example of this I saw in fs/pipe.c),
then we just wake the entire exclusive list.  Having both 'POLLOUT' and
'POLLIN' both set should not be on any performance critical path, so I
think that's ok (in fs/pipe.c its in pipe_release()).  We also continue
to include EPOLLERR and EPOLLHUP by default in any exclusive set.  Thus,
the user can specify EPOLLERR and/or EPOLLHUP but is not required to do
so.

Since epoll waiters may be interested in other events as well besides
EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by
doing a 'dup' call on the target fd and adding that as one normally
would with EPOLL_CTL_ADD.  Since I think that the POLLIN and POLLOUT
events are what we are interest in balancing, I think that the 'dup'
thing could perhaps be added to only one of the waiter threads.
However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be
sufficient for the majority of use-cases.

Since EPOLLEXCLUSIVE is intended to be used with a target fd shared
among multiple epfds, where between 1 and n of the epfds may receive an
event, it does not satisfy the semantics of EPOLLONESHOT where only 1
epfd would get an event.  Thus, it is not allowed to be specified in
conjunction with EPOLLEXCLUSIVE.

EPOLL_CTL_MOD is also not allowed if the fd was previously added as
EPOLLEXCLUSIVE.  It seems with the limited number of flags to not be as
interesting, but this could be relaxed at some further point.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Tested-by: Madars Vitolins <m@silodev.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Helper radix_tree_iter_retry() resets next_index to the current index.
In following radix_tree_next_slot current chunk size becomes zero.  This
isn't checked and it tries to dereference null pointer in slot.

Tagged iterator is fine because retry happens only at slot 0 where tag
bitmask in iter->tags is filled with single bit.

Fixes: 46437f9a ("radix-tree: fix race in gang lookup")
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit ea8f8fc8 ("MAINTAINERS: add linux-api for review of API/ABI
changes") added file triggers for various paths that likely indicated
API/ABI changes.  However, catching all changes in Documentation/ABI/
and include/uapi/ produces a large volume of mail to linux-api, rather
than only API/ABI changes.  Drop those two entries, but leave
include/linux/syscalls.h and kernel/sys_ni.c to catch syscall-related
changes.

[josh@joshtriplett.org: redid changelog]
Signed-off-by: Michael Kerrisk <mtk.man-pages@gmail.com>
Acked-by: Shuah khan <shuahkh@osg.samsung.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>