- 01 Oct, 2020 38 commits
-
-
Bradley Bolen authored
[ Upstream commit f3d7c229 ] With large eMMC cards, it is possible to create general purpose partitions that are bigger than 4GB. The size member of the mmc_part struct is only an unsigned int which overflows for gp partitions larger than 4GB. Change this to a u64 to handle the overflow. Signed-off-by:
Bradley Bolen <bradleybolen@gmail.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sascha Hauer authored
[ Upstream commit f9c34bb5 ] When a new fastmap is about to be written UBI must make sure it has a free block for a fastmap anchor available. For this ubi_update_fastmap() calls ubi_ensure_anchor_pebs(). This stopped working with 2e8f08de ("ubi: Fix races around ubi_refill_pools()"), with this commit the wear leveling code is blocked and can no longer produce free PEBs. UBI then more often than not falls back to write the new fastmap anchor to the same block it was already on which means the same erase block gets erased during each fastmap write and wears out quite fast. As the locking prevents us from producing the anchor PEB when we actually need it, this patch changes the strategy for creating the anchor PEB. We no longer create it on demand right before we want to write a fastmap, but instead we create an anchor PEB right after we have written a fastmap. This gives us enough time to produce a new anchor PEB before it is needed. To make sure we have an anchor PEB for the very first fastmap write we call ubi_ensure_anchor_pebs() during initialisation as well. Fixes: 2e8f08de ("ubi: Fix races around ubi_refill_pools()") Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 9067f2f0 ] We should jump to fail3 in order to undo the 'xa_insert_irq()' call. Link: https://lore.kernel.org/r/20190923190746.10964-1-christophe.jaillet@wanadoo.frSigned-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Brian Foster authored
[ Upstream commit 2a2b5932 ] The leaf format xattr addition helper xfs_attr3_leaf_add_work() adjusts the block freemap in a couple places. The first update drops the size of the freemap that the caller had already selected to place the xattr name/value data. Before the function returns, it also checks whether the entries array has encroached on a freemap range by virtue of the new entry addition. This is necessary because the entries array grows from the start of the block (but end of the block header) towards the end of the block while the name/value data grows from the end of the block in the opposite direction. If the associated freemap is already empty, however, size is zero and the subtraction underflows the field and causes corruption. This is reproduced rarely by generic/070. The observed behavior is that a smaller sized freemap is aligned to the end of the entries list, several subsequent xattr additions land in larger freemaps and the entries list expands into the smaller freemap until it is fully consumed and then underflows. Note that it is not otherwise a corruption for the entries array to consume an empty freemap because the nameval list (i.e. the firstused pointer in the xattr header) starts beyond the end of the corrupted freemap. Update the freemap size modification to account for the fact that the freemap entry can be empty and thus stale. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit e8400933 ] We are overoptimistic about taking the fast path there; seeing the same value in ->d_parent after having grabbed a reference to that parent does *not* mean that it has remained our parent all along. That wouldn't be a big deal (in the end it is our parent and we have grabbed the reference we are about to return), but... the situation with barriers is messed up. We might have hit the following sequence: d is a dentry of /tmp/a/b CPU1: CPU2: parent = d->d_parent (i.e. dentry of /tmp/a) rename /tmp/a/b to /tmp/b rmdir /tmp/a, making its dentry negative grab reference to parent, end up with cached parent->d_inode (NULL) mkdir /tmp/a, rename /tmp/b to /tmp/a/b recheck d->d_parent, which is back to original decide that everything's fine and return the reference we'd got. The trouble is, caller (on CPU1) will observe dget_parent() returning an apparently negative dentry. It actually is positive, but CPU1 has stale ->d_inode cached. Use d->d_seq to see if it has been moved instead of rechecking ->d_parent. NOTE: we are *NOT* going to retry on any kind of ->d_seq mismatch; we just go into the slow path in such case. We don't wait for ->d_seq to become even either - again, if we are racing with renames, we can bloody well go to slow path anyway. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Pan Bian authored
[ Upstream commit da046d5f ] Release variable dst after logging dst->error to avoid possible use after free. Link: https://lore.kernel.org/r/1573022651-37171-1-git-send-email-bianpan2016@163.comSigned-off-by:
Pan Bian <bianpan2016@163.com> Reviewed-by:
-
Pan Bian authored
[ Upstream commit 960657b7 ] Move the release operation after error log to avoid possible use after free. Link: https://lore.kernel.org/r/1573021434-18768-1-git-send-email-bianpan2016@163.comSigned-off-by:
-
Satendra Singh Thakur authored
[ Upstream commit 1ff95243 ] When devm_request_irq fails, currently, the function dma_async_device_unregister gets called. This doesn't free the resources allocated by of_dma_controller_register. Therefore, we have called of_dma_controller_free for this purpose. Signed-off-by:
Satendra Singh Thakur <sst2005@gmail.com> Link: https://lore.kernel.org/r/20191109113523.6067-1-sst2005@gmail.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Guoju Fang authored
[ Upstream commit 34cf78bf ] This patch fix a lost wake-up problem caused by the race between mca_cannibalize_lock and bch_cannibalize_unlock. Consider two processes, A and B. Process A is executing mca_cannibalize_lock, while process B takes c->btree_cache_alloc_lock and is executing bch_cannibalize_unlock. The problem happens that after process A executes cmpxchg and will execute prepare_to_wait. In this timeslice process B executes wake_up, but after that process A executes prepare_to_wait and set the state to TASK_INTERRUPTIBLE. Then process A goes to sleep but no one will wake up it. This problem may cause bcache device to dead. Signed-off-by:
Guoju Fang <fangguoju@gmail.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Divya Indi authored
[ Upstream commit 953ae45a ] As part of commit f45d1225 ("tracing: Kernel access to Ftrace instances") we exported certain functions. Here, we are adding some additional NULL checks to ensure safe usage by users of these APIs. Link: http://lkml.kernel.org/r/1565805327-579-4-git-send-email-divya.indi@oracle.comSigned-off-by:
Divya Indi <divya.indi@oracle.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Ivan Lazeev authored
[ Upstream commit 3ef19382 ] Bug link: https://bugzilla.kernel.org/show_bug.cgi?id=195657 cmd/rsp buffers are expected to be in the same ACPI region. For Zen+ CPUs BIOS's might report two different regions, some of them also report region sizes inconsistent with values from TPM registers. Memory configuration on ASRock x470 ITX: db0a0000-dc59efff : Reserved dc57e000-dc57efff : MSFT0101:00 dc582000-dc582fff : MSFT0101:00 Work around the issue by storing ACPI regions declared for the device in a fixed array and adding an array for pointers to corresponding possibly allocated resources in crb_map_io function. This data was previously held for a single resource in struct crb_priv (iobase field) and local variable io_res in crb_map_io function. ACPI resources array is used to find index of corresponding region for each buffer and make the buffer size consistent with region's length. Array of pointers to allocated resources is used to map the region at most once. Signed-off-by:
Ivan Lazeev <ivan.lazeev@gmail.com> Tested-by:
Jerry Snitselaar <jsnitsel@redhat.com> Tested-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by:
-
Alex Deucher authored
[ Upstream commit 90124562 ] When a custom powerplay table is provided, we need to update the OD VDDC flag to avoid AVFS being enabled when it shouldn't be. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205393Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lee Jones authored
[ Upstream commit b195e101 ] If a child device calls mfd_cell_{en,dis}able() without an appropriate call-back being set, we are likely to encounter a panic. Avoid this by adding suitable checking. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Hou Tao authored
[ Upstream commit 03976af8 ] Else there may be a double-free problem, because cfi->cfiq will be freed by mtd_do_chip_probe() if both the two invocations of check_cmd_set() return failure. Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 53dbc27a ] When a custom powerplay table is provided, we need to update the OD VDDC flag to avoid AVFS being enabled when it shouldn't be. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205393Reviewed-by:
-
Stephen Kitt authored
[ Upstream commit 7f6ac729 ] The buffer allocated in ti_adpll_clk_get_name doesn't account for the terminating null. This patch switches to devm_kasprintf to avoid overflowing. Signed-off-by:
Stephen Kitt <steve@sk2.org> Link: https://lkml.kernel.org/r/20191019140634.15596-1-steve@sk2.orgAcked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9ed498c6 ] sk->sk_backlog.tail might be read without holding the socket spinlock, we need to add proper READ_ONCE()/WRITE_ONCE() to silence the warnings. KCSAN reported : BUG: KCSAN: data-race in tcp_add_backlog / tcp_recvmsg write to 0xffff8881265109f8 of 8 bytes by interrupt on cpu 1: __sk_add_backlog include/net/sock.h:907 [inline] sk_add_backlog include/net/sock.h:938 [inline] tcp_add_backlog+0x476/0xce0 net/ipv4/tcp_ipv4.c:1759 tcp_v4_rcv+0x1a70/0x1bd0 net/ipv4/tcp_ipv4.c:1947 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:4929 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5043 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5133 napi_skb_finish net/core/dev.c:5596 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5629 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061 virtnet_receive drivers/net/virtio_net.c:1323 [inline] virtnet_poll+0x436/0x7d0 drivers/net/virtio_net.c:1428 napi_poll net/core/dev.c:6311 [inline] net_rx_action+0x3ae/0xa90 net/core/dev.c:6379 __do_softirq+0x115/0x33f kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0xbb/0xe0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] do_IRQ+0xa6/0x180 arch/x86/kernel/irq.c:263 ret_from_intr+0x0/0x19 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 start_secondary+0x208/0x260 arch/x86/kernel/smpboot.c:264 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 read to 0xffff8881265109f8 of 8 bytes by task 8057 on cpu 0: tcp_recvmsg+0x46e/0x1b40 net/ipv4/tcp.c:2050 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1889 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 __vfs_read+0xb1/0xc0 fs/read_write.c:427 vfs_read fs/read_write.c:461 [inline] vfs_read+0x143/0x2c0 fs/read_write.c:446 ksys_read+0xd5/0x1b0 fs/read_write.c:587 __do_sys_read fs/read_write.c:597 [inline] __se_sys_read fs/read_write.c:595 [inline] __x64_sys_read+0x4c/0x60 fs/read_write.c:595 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 8057 Comm: syz-fuzzer Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
James Smart authored
[ Upstream commit 6c1e803e ] When reading sysfs nvme_info file while a remote port leaves and comes back, a NULL pointer is encountered. The issue is due to ndlp list corruption as the the nvme_info_show does not use the same lock as the rest of the code. Correct by removing the rcu_xxx_lock calls and replace by the host_lock and phba->hbaLock spinlocks that are used by the rest of the driver. Given we're called from sysfs, we are safe to use _irq rather than _irqsave. Link: https://lore.kernel.org/r/20191105005708.7399-4-jsmart2021@gmail.comSigned-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Pan Bian authored
[ Upstream commit ec990306 ] The memory chunk io_req is released by mempool_free. Accessing io_req->start_time will result in a use after free bug. The variable start_time is a backup of the timestamp. So, use start_time here to avoid use after free. Link: https://lore.kernel.org/r/1572881182-37664-1-git-send-email-bianpan2016@163.comSigned-off-by:
Satish Kharat <satishkh@cisco.com> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 53b4b2ae ] There is another kHz-conversion bug in the code, resulting in integer overflow. Although, this time the resulting value is 4294966296 and it's close to ULONG_MAX, which is okay in this case. Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Tested-by:
Peter Geis <pgwipeout@gmail.com> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Oleh Kravchenko authored
[ Upstream commit 7c6082b9 ] Error was detected by PVS-Studio: V512 A call of the 'sprintf' function will lead to overflow of the buffer 'led_data->led_cdev_name'. Acked-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by:
-
Nick Desaulniers authored
commit 1e1b6d63 upstream. LLVM implemented a recent "libcall optimization" that lowers calls to `sprintf(dest, "%s", str)` where the return value is used to `stpcpy(dest, str) - dest`. This generally avoids the machinery involved in parsing format strings. `stpcpy` is just like `strcpy` except it returns the pointer to the new tail of `dest`. This optimization was introduced into clang-12. Implement this so that we don't observe linkage failures due to missing symbol definitions for `stpcpy`. Similar to last year's fire drill with: commit 5f074f3e ("lib/string.c: implement a basic bcmp") The kernel is somewhere between a "freestanding" environment (no full libc) and "hosted" environment (many symbols from libc exist with the same type, function signature, and semantics). As Peter Anvin notes, there's not really a great way to inform the compiler that you're targeting a freestanding environment but would like to opt-in to some libcall optimizations (see pr/47280 below), rather than opt-out. Arvind notes, -fno-builtin-* behaves slightly differently between GCC and Clang, and Clang is missing many __builtin_* definitions, which I consider a bug in Clang and am working on fixing. Masahiro summarizes the subtle distinction between compilers justly: To prevent transformation from foo() into bar(), there are two ways in Clang to do that; -fno-builtin-foo, and -fno-builtin-bar. There is only one in GCC; -fno-buitin-foo. (Any difference in that behavior in Clang is likely a bug from a missing __builtin_* definition.) Masahiro also notes: We want to disable optimization from foo() to bar(), but we may still benefit from the optimization from foo() into something else. If GCC implements the same transform, we would run into a problem because it is not -fno-builtin-bar, but -fno-builtin-foo that disables that optimization. In this regard, -fno-builtin-foo would be more future-proof than -fno-built-bar, but -fno-builtin-foo is still potentially overkill. We may want to prevent calls from foo() being optimized into calls to bar(), but we still may want other optimization on calls to foo(). It seems that compilers today don't quite provide the fine grain control over which libcall optimizations pseudo-freestanding environments would prefer. Finally, Kees notes that this interface is unsafe, so we should not encourage its use. As such, I've removed the declaration from any header, but it still needs to be exported to avoid linkage errors in modules. Reported-by:
Sami Tolvanen <samitolvanen@google.com> Suggested-by:
Andy Lavr <andy.lavr@gmail.com> Suggested-by:
Arvind Sankar <nivedita@alum.mit.edu> Suggested-by:
Joe Perches <joe@perches.com> Suggested-by:
Kees Cook <keescook@chromium.org> Suggested-by:
Masahiro Yamada <masahiroy@kernel.org> Suggested-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by:
Nathan Chancellor <natechancellor@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200914161643.938408-1-ndesaulniers@google.com Link: https://bugs.llvm.org/show_bug.cgi?id=47162 Link: https://bugs.llvm.org/show_bug.cgi?id=47280 Link: https://github.com/ClangBuiltLinux/linux/issues/1126 Link: https://man7.org/linux/man-pages/man3/stpcpy.3.html Link: https://pubs.opengroup.org/onlinepubs/9699919799/functions/stpcpy.html Link: https://reviews.llvm.org/D85963Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kai-Heng Feng authored
commit f73bbf63 upstream. On Lenovo P520, the front panel headset LED isn't lit up right now. Realtek states that the LED needs to be enabled by ALC233's GPIO2, so let's do it accordingly to light the LED up. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200914070231.13192-1-kai.heng.feng@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hui Wang authored
commit 3f742490 upstream. We found a Mic detection issue on many Lenovo laptops, those laptops belong to differnt models and they have different audio design like internal mic connects to the codec or PCH, they all have this problem, the problem is if plugging a headset before powerup/reboot the machine, after booting up, the headphone could be detected but Mic couldn't. If we plug out and plug in the headset, both headphone and Mic could be detected then. Through debugging we found the codec on those laptops are same, it is alc257, and if we don't disable the 3k pulldown in alc256_shutup(), the issue will be fixed. So far there is no pop noise or power consumption regression on those laptops after this change. Cc: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Joakim Tjernlund authored
commit 315c7ad7 upstream. Needs the same delay as H650e Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200910085328.19188-1-joakim.tjernlund@infinera.comSigned-off-by:
-
Thomas Gleixner authored
commit 86a82ae0 upstream. Several people reported in the kernel bugzilla that between v4.12 and v4.13 the magic which works around broken hardware and BIOSes to find the proper timer interrupt delivery mode stopped working for some older affected platforms which need to fall back to ExtINT delivery mode. The reason is that the core code changed to keep track of the masked and disabled state of an interrupt line more accurately to avoid the expensive hardware operations. That broke an assumption in i8259_make_irq() which invokes disable_irq_nosync(); irq_set_chip_and_handler(); enable_irq(); Up to v4.12 this worked because enable_irq() unconditionally unmasked the interrupt line, but after the state tracking improvements this is not longer the case because the IO/APIC uses lazy disabling. So the line state is unmasked which means that enable_irq() does not call into the new irq chip to unmask it. In principle this is a shortcoming of the core code, but it's more than unclear whether the core code should try to reset state. At least this cannot be done unconditionally as that would break other existing use cases where the chip type is changed, e.g. when changing the trigger type, but the callers expect the state to be preserved. As the way how check_timer() is switching the delivery modes is truly unique, the obvious fix is to simply unmask the i8259 manually after changing the mode to ExtINT delivery and switching the irq chip to the legacy PIC. Note, that the fixes tag is not really precise, but identifies the commit which broke the assumptions in the IO/APIC and i8259 code and that's the kernel version to which this needs to be backported. Fixes: bf22ff45 ("genirq: Avoid unnecessary low level irq function calls") Reported-by: p_c_chan@hotmail.com Reported-by: ecm4@mail.com Reported-by: perdigao1@yahoo.com Reported-by: matzes@users.sourceforge.net Reported-by: rvelascog@gmail.com Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by: p_c_chan@hotmail.com Tested-by: matzes@users.sourceforge.net Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=197769Signed-off-by:
-
Mikulas Patocka authored
commit a1cd6c2a upstream. If we copy less than 8 bytes and if the destination crosses a cache line, __copy_user_flushcache would invalidate only the first cache line. This patch makes it invalidate the second cache line as well. Fixes: 0aed55af ("x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Dan Williams <dan.j.wiilliams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2009161451140.21915@file01.intranet.prod.int.rdu2.redhat.comSigned-off-by:
-
Sakari Ailus authored
[ Upstream commit a5b1d541 ] If NVM reading failed, the device was left powered on. Fix that. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Russell King authored
[ Upstream commit 175fc928 ] Propagate the error code from request_irq(), rather than returning -EBUSY. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1iNIqh-0000tW-EZ@rmk-PC.armlinux.org.ukSigned-off-by:
-
Kangjie Lu authored
[ Upstream commit 57a25a5f ] `best_clock` is an object that may be sent out. Object `clock` contains uninitialized bytes that are copied to `best_clock`, which leads to memory disclosure and information leak. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191018042953.31099-1-kjlu@umn.eduSigned-off-by:
-
Fuqian Huang authored
[ Upstream commit 7cf78b6b ] When the option is RTC_PLL_GET, pll will be copied to userland via copy_to_user. pll is initialized using mach_get_rtc_pll indirect call and mach_get_rtc_pll is only assigned with function q40_get_rtc_pll in arch/m68k/q40/config.c. In function q40_get_rtc_pll, the field pll_ctrl is not initialized. This will leak uninitialized stack content to userland. Fix this by zeroing the uninitialized field. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/r/20190927121544.7650-1-huangfq.daxian@gmail.comSigned-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Balsundar P authored
[ Upstream commit c86fbe48 ] The driver fails to handle data when read or written beyond device reported LBA, which triggers kernel panic Link: https://lore.kernel.org/r/1571120524-6037-2-git-send-email-balsundar.p@microsemi.comSigned-off-by:
Balsundar P <balsundar.p@microsemi.com> Signed-off-by:
-
Jia He authored
[ Upstream commit 83d116c5 ] When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page. To reproduce the bug, the cmd is as follows after you deployed everything: make -C src/test/vmmalloc_fork/ TEST_TIME=60m check Below call trace is from arm64 do_page_fault for debugging purpose: [ 110.016195] Call trace: [ 110.016826] do_page_fault+0x5a4/0x690 [ 110.017812] do_mem_abort+0x50/0xb0 [ 110.018726] el1_da+0x20/0xc4 [ 110.019492] __arch_copy_from_user+0x180/0x280 [ 110.020646] do_wp_page+0xb0/0x860 [ 110.021517] __handle_mm_fault+0x994/0x1338 [ 110.022606] handle_mm_fault+0xe8/0x180 [ 110.023584] do_page_fault+0x240/0x690 [ 110.024535] do_mem_abort+0x50/0xb0 [ 110.025423] el0_da+0x20/0x24 The pte info before __copy_from_user_inatomic is (PTE_AF is cleared): [ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003, pmd=000000023d4b3003, pte=360000298607bd3 As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64." This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page() Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill). [1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_forkSigned-off-by:
Jia He <justin.he@arm.com> Reported-by:
Yibo Cai <Yibo.Cai@arm.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Miaoqing Pan authored
[ Upstream commit 486a8849 ] The memory of ar->debug.tpc_stats_final is reallocated every debugfs reading, it should be freed in ath10k_debug_destroy() for the last allocation. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Miaoqing Pan authored
[ Upstream commit c5329b2d ] If firmware reports rate_max > WMI_TPC_RATE_MAX(WMI_TPC_FINAL_RATE_MAX) or num_tx_chain > WMI_TPC_TX_N_CHAIN, it will cause array out-of-bounds access, so print a warning and reset to avoid memory corruption. Tested HW: QCA9984 Tested FW: 10.4-3.9.0.2-00035 Signed-off-by:
-
Chris Wilson authored
[ Upstream commit 9c98f021 ] Make dma_fence_enable_sw_signaling() behave like its dma_fence_add_callback() and dma_fence_default_wait() counterparts and perform the test to enable signaling under the fence->lock, along with the action to do so. This ensure that should an implementation be trying to flush the cb_list (by signaling) on retirement before freeing the fence, it can do so in a race-free manner. See also 0fc89b68 ("dma-fence: Simply wrap dma_fence_signal_locked with dma_fence_signal"). v2: Refactor all 3 enable_signaling paths to use a common function. v3: Don't argue, just keep the tracepoint in the existing spot. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191004101140.32713-1-chris@chris-wilson.co.ukSigned-off-by:
-
zhengbin authored
[ Upstream commit 713f871b ] In media_device_register_entity, if media_graph_walk_init fails, need to free the previously memory. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
Jonathan Lebon authored
[ Upstream commit 3e3e24b4 ] Currently, the SELinux LSM prevents one from setting the `security.selinux` xattr on an inode without a policy first being loaded. However, this restriction is problematic: it makes it impossible to have newly created files with the correct label before actually loading the policy. This is relevant in distributions like Fedora, where the policy is loaded by systemd shortly after pivoting out of the initrd. In such instances, all files created prior to pivoting will be unlabeled. One then has to relabel them after pivoting, an operation which inherently races with other processes trying to access those same files. Going further, there are use cases for creating the entire root filesystem on first boot from the initrd (e.g. Container Linux supports this today[1], and we'd like to support it in Fedora CoreOS as well[2]). One can imagine doing this in two ways: at the block device level (e.g. laying down a disk image), or at the filesystem level. In the former, labeling can simply be part of the image. But even in the latter scenario, one still really wants to be able to set the right labels when populating the new filesystem. This patch enables this by changing behaviour in the following two ways: 1. allow `setxattr` if we're not initialized 2. don't try to set the in-core inode SID if we're not initialized; instead leave it as `LABEL_INVALID` so that revalidation may be attempted at a later time Note the first hunk of this patch is mostly the same as a previously discussed one[3], though it was part of a larger series which wasn't accepted. [1] https://coreos.com/os/docs/latest/root-filesystem-placement.html [2] https://github.com/coreos/fedora-coreos-tracker/issues/94 [3] https://www.spinics.net/lists/linux-initramfs/msg04593.htmlCo-developed-by:
Victor Kamensky <kamensky@cisco.com> Signed-off-by:
Jonathan Lebon <jlebon@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
- 26 Sep, 2020 2 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Lukas Wunner authored
commit e0a851fe upstream. If the call to uart_add_one_port() in serial8250_register_8250_port() fails, a half-initialized entry in the serial_8250ports[] array is left behind. A subsequent reprobe of the same serial port causes that entry to be reused. Because uart->port.dev is set, uart_remove_one_port() is called for the half-initialized entry and bails out with an error message: bcm2835-aux-uart 3f215040.serial: Removing wrong port: (null) != (ptrval) The same happens on failure of mctrl_gpio_init() since commit 4a96895f ("tty/serial/8250: use mctrl_gpio helpers"). Fix by zeroing the uart->port.dev pointer in the probe error path. The bug was introduced in v2.6.10 by historical commit befff6f5 ("[SERIAL] Add new port registration/unregistration functions."): https://git.kernel.org/tglx/history/c/befff6f5bf5f The commit added an unconditional call to uart_remove_one_port() in serial8250_register_port(). In v3.7, commit 835d844d ("8250_pnp: do pnp probe before legacy probe") made that call conditional on uart->port.dev which allows me to fix the issue by zeroing that pointer in the error path. Thus, the present commit will fix the problem as far back as v3.7 whereas still older versions need to also cherry-pick 835d844d. Fixes: 835d844d ("8250_pnp: do pnp probe before legacy probe") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v2.6.10 Cc: stable@vger.kernel.org # v2.6.10: 835d844d: 8250_pnp: do pnp probe before legacy Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/b4a072013ee1a1d13ee06b4325afb19bda57ca1b.1589285873.git.lukas@wunner.de [iwamatsu: Backported to 4.14, 4.19: adjust context] Signed-off-by:
Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
