- 08 May, 2023 3 commits
-
-
Radhakrishna Sripada authored
Fixes the right lineage number for the workaround. Fixes: a7fa1537 ("drm/i915/mtl: Implement Wa_14019141245") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230505234544.4029535-1-radhakrishna.sripada@intel.com
-
Clint Taylor authored
Add support for remapping CCS FBs on MTL to remove the restriction of the power-of-two sized stride and the 2MB surface offset alignment for these FBs. Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by:
Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230505144005.23480-2-nirmoy.das@intel.com
-
Pallavi Mishra authored
Remove FLAT CCS check from XY_FAST_COLOR_BLT usage, thus enabling MTL to use it. Signed-off-by:
Pallavi Mishra <pallavi.mishra@intel.com> Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
- 05 May, 2023 12 commits
-
-
John Harrison authored
If the DEBUG_GEM config option is set then escalate the 'unexpected firmware version' message from a notice to an error. This will ensure that the CI system treats such occurences as a failure and logs a bug about it (or fails the pre-merge testing). Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502234007.1762014-7-John.C.Harrison@Intel.com
-
John Harrison authored
It was noticed that duplicate entries in the firmware table could cause an infinite loop in the firmware loading code if that entry failed to load. Duplicate entries are a bug anyway and so should never happen. Ensure they don't by tweaking the table validation code to reject duplicates. For full m/m/p files, that can be done by simply tweaking the patch level check to reject matching values. For reduced version entries, the filename itself must be compared. v2: Improve comment (review by Daniele) Signed-off-by:
-
John Harrison authored
The validation of the firmware table was being done inside the code for scanning the table for the next available firmware blob. Which is unnecessary. So pull it out into a separate function that is only called once per blob type at init time. Also, drop the CONFIG_SELFTEST requirement and make errors terminal. It was mentioned that potential issues with backports would not be caught by regular pre-merge CI as that only occurs on tip not stable branches. Making the validation unconditional and failing driver load on detecting of a problem ensures that such backports will also be validated correctly. This requires adding a firmware global flag to indicate an issue with any of the per firmware tables. This is done rather than adding a new state enum as a new enum value would be a much more invasive change - lots of places would need updating to support the new error state. Note also that this change means that a table error will cause the driver to wedge even on platforms that don't require firmware files. This is intentional as per the above backport concern - someone doing backports is not guaranteed to test on every platform that they may potential affect. So forcing a failure on all platforms ensures that the problem will be noticed and corrected immediately. v2: Change to unconditionally fail module load on a validation error (review feedback/discussion with Daniele). v3: Add a new flag to track table validation errors (review feedback/discussion with Daniele). Signed-off-by:
-
John Harrison authored
If the GuC load is taking an excessively long time, the wait loop currently prints the GT frequency. Extend that to include the GuC status as well so we can see if the GuC is actually making progress or not. Signed-off-by:
-
John Harrison authored
Explain another potential firmware failure mode and early exit the long wait if hit. Signed-off-by:
-
John Harrison authored
First release of GuC for Meteorlake. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
John Harrison authored
When reduced version firmware files were added (matching major component being the only strict requirement), the minor version was still tracked and a notification reported if it was older. However, the patch version should really be tracked as well for the same reasons. The KMD can work without the change but if the effort has been taken to release a new firmware with the change then there must be a valid reason for doing so - important bug fix, security fix, etc. And in that case it would be good to alert the user if they are missing out on that new fix. v2: Use correct patch version number and drop redunant debug print (review by Daniele / CI results). Signed-off-by:
-
Jani Nikula authored
With CONFIG_DRM_I915_WERROR=y, we enable kernel-doc check for both objects and headers. Now that the kernel-doc warnings have been fixed, also enable kernel-doc -Werror to fail the build on kernel-doc warnings. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/68ffcad0e6ff2b6cd70c6df28822f967898ce197.1683041799.git.jani.nikula@intel.com
-
Jani Nikula authored
drivers/gpu/drm/i915/gem/i915_gem_ttm.h:50: warning: Function parameter or member 'bo' not described in 'i915_ttm_to_gem' v2: Fix return value documentation while at it (Rodrigo) Signed-off-by:
-
Jani Nikula authored
Can't document function pointer members as if they are functions. drivers/gpu/drm/i915/i915_scatterlist.h:160: warning: Incorrect use of kernel-doc format: * release() - Free the memory of the struct i915_refct_sgt Signed-off-by:
-
Jani Nikula authored
You can't document function pointer member as functions. drivers/gpu/drm/i915/gem/i915_gem_region.h:25: warning: Incorrect use of kernel-doc format: * process_obj - Process the current object drivers/gpu/drm/i915/gem/i915_gem_region.h:35: warning: Function parameter or member 'process_obj' not described in 'i915_gem_apply_to_region_ops' Signed-off-by:
-
Jani Nikula authored
You can't document both a sub-struct type and a struct member at the same time. Separate them. drivers/gpu/drm/i915/i915_vma_resource.h:91: warning: Incorrect use of kernel-doc format: * struct i915_vma_bindinfo - Information needed for async bind drivers/gpu/drm/i915/i915_vma_resource.h:129: warning: Function parameter or member 'bi' not described in 'i915_vma_resource' Signed-off-by:
-
- 04 May, 2023 23 commits
-
-
Daniele Ceraolo Spurio authored
The GSC notifies us of a proxy request via the HECI2 interrupt. The interrupt must be enabled both in the HECI layer and in our usual gt irq programming; for the latter, the interrupt is enabled via the same enable register as the GSC CS, but it does have its own mask register. When the interrupt is received, we also need to de-assert it in both layers. The handling of the proxy request is deferred to the same worker that we use for GSC load. New flags have been added to distinguish between the init case and the proxy interrupt. v2: Make sure not to set the reset bit when enabling/disabling the GSC interrupts, fix defines (Alan) v3: rebase on proxy status register check Signed-off-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502163854.317653-5-daniele.ceraolospurio@intel.com
-
Daniele Ceraolo Spurio authored
The GSC uC needs to communicate with the CSME to perform certain operations. Since the GSC can't perform this communication directly on platforms where it is integrated in GT, i915 needs to transfer the messages from GSC to CSME and back. The proxy flow is as follow: 1 - i915 submits a request to GSC asking for the message to CSME 2 - GSC replies with the proxy header + payload for CSME 3 - i915 sends the reply from GSC as-is to CSME via the mei proxy component 4 - CSME replies with the proxy header + payload for GSC 5 - i915 submits a request to GSC with the reply from CSME 6 - GSC replies either with a new header + payload (same as step 2, so we restart from there) or with an end message. After GSC load, i915 is expected to start the first proxy message chain, while all subsequent ones will be triggered by the GSC via interrupt. To communicate with the CSME, we use a dedicated mei component, which means that we need to wait for it to bind before we can initialize the proxies. This usually happens quite fast, but given that there is a chance that we'll have to wait a few seconds the GSC work has been moved to a dedicated WQ to not stall other processes. v2: fix code style, includes and variable naming (Alan) v3: add extra check for proxy status, fix includes and comments Signed-off-by: -
Alexander Usyskin authored
Add GSC proxy driver. It to allows messaging between GSC component on Intel graphics card and CSE device. Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Alexander Usyskin authored
GSC Proxy component is used for communication between the Intel graphics driver and MEI driver. Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/i915_scatterlist.h:164: warning: Function parameter or member 'release' not described in 'i915_refct_sgt_ops' drivers/gpu/drm/i915/i915_scatterlist.h:187: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_put' drivers/gpu/drm/i915/i915_scatterlist.h:198: warning: Function parameter or member 'rsgt' not described in 'i915_refct_sgt_get' drivers/gpu/drm/i915/i915_scatterlist.h:214: warning: Function parameter or member 'rsgt' not described in '__i915_refct_sgt_init' Signed-off-by:
-
Jani Nikula authored
Add /** to make it a kernel-doc. drivers/gpu/drm/i915/pxp/intel_pxp_types.h:96: warning: Function parameter or member 'dev_link' not described in 'intel_pxp' Signed-off-by:
-
Jani Nikula authored
The comments are closer to not being kernel-doc. drivers/gpu/drm/i915/i915_pmu.h:21: warning: cannot understand function prototype: 'enum i915_pmu_tracked_events ' drivers/gpu/drm/i915/i915_pmu.h:32: warning: cannot understand function prototype: 'enum ' drivers/gpu/drm/i915/i915_pmu.h:41: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * How many different events we track in the global PMU mask. Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'active' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fence' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:66: warning: Function parameter or member 'fn' not described in '__i915_active_fence_init' drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'active' not described in 'i915_active_fence_set' drivers/gpu/drm/i915/i915_active.h:89: warning: Function parameter or member 'rq' not described in 'i915_active_fence_set' drivers/gpu/drm/i915/i915_active.h:102: warning: Function parameter or member 'active' not described in 'i915_active_fence_get' drivers/gpu/drm/i915/i915_active.h:122: warning: Function parameter or member 'active' not described in 'i915_active_fence_isset' Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:216: warning: Function parameter or member 'ads_null_cache' not described in 'intel_guc_state_capture' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:216: warning: Function parameter or member 'max_mmio_per_node' not described in 'intel_guc_state_capture' Signed-off-by:
-
Jani Nikula authored
The documentation is closer to not being kernel-doc, so just drop the kernel-doc markers. drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'size' not described in '__guc_capture_bufstate' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'data' not described in '__guc_capture_bufstate' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'rd' not described in '__guc_capture_bufstate' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:27: warning: Function parameter or member 'wr' not described in '__guc_capture_bufstate' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'link' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'is_partial' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_class' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'eng_inst' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'guc_id' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'lrca' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:59: warning: Function parameter or member 'reginfo' not described in '__guc_capture_parsed_output' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:62: warning: wrong kernel-doc identifier on line: * struct guc_debug_capture_list_header / struct guc_debug_capture_list drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:80: warning: wrong kernel-doc identifier on line: * struct __guc_mmio_reg_descr / struct __guc_mmio_reg_descr_group drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:105: warning: wrong kernel-doc identifier on line: * struct guc_state_capture_header_t / struct guc_state_capture_t / drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'is_valid' not described in '__guc_capture_ads_cache' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'ptr' not described in '__guc_capture_ads_cache' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'size' not described in '__guc_capture_ads_cache' drivers/gpu/drm/i915/gt/uc/guc_capture_fwif.h:163: warning: Function parameter or member 'status' not described in '__guc_capture_ads_cache' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'marker' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'read_ptr' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'write_ptr' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'size' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'sampled_write_ptr' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'wrap_offset' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flush_to_file' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'buffer_full_cnt' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'reserved' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'flags' not described in 'guc_log_buffer_state' drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h:491: warning: Function parameter or member 'version' not described in 'guc_log_buffer_state' Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/gt/uc/intel_guc.h:274: warning: Function parameter or member 'dbgfs_node' not described in 'intel_guc' Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/gt/intel_engine_types.h:293: warning: Function parameter or member 'preempt_hang' not described in 'intel_engine_execlists' Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/gt/intel_gtt.h:515: warning: Function parameter or member 'vm' not described in 'i915_vm_resv_put' drivers/gpu/drm/i915/gt/intel_gtt.h:515: warning: Excess function parameter 'resv' description in 'i915_vm_resv_put' Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/gt/intel_context.h:108: warning: Function parameter or member 'ce' not described in 'intel_context_lock_pinned' drivers/gpu/drm/i915/gt/intel_context.h:123: warning: Function parameter or member 'ce' not described in 'intel_context_is_pinned' drivers/gpu/drm/i915/gt/intel_context.h:142: warning: Function parameter or member 'ce' not described in 'intel_context_unlock_pinned' Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/gt/intel_engine_cs.c:1525: warning: expecting prototype for intel_engines_cleanup_common(). Prototype was for intel_engine_cleanup_common() instead Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/gem/i915_gem_object.h:94: warning: Function parameter or member 'file' not described in 'i915_gem_object_lookup_rcu' drivers/gpu/drm/i915/gem/i915_gem_object.h:94: warning: Excess function parameter 'filp' description in 'i915_gem_object_lookup_rcu' Signed-off-by:
-
Jani Nikula authored
The documentation is closer to not being kernel-doc. Just drop the kernel-doc /** indicators. drivers/gpu/drm/i915/i915_request.h:176: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Request queue structure. drivers/gpu/drm/i915/i915_request.h:477: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Returns true if seq1 is later than seq2. Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/i915_gpu_error.c:2174: warning: Function parameter or member 'dump_flags' not described in 'i915_capture_error_state' Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/i915_perf.c:5307: warning: Function parameter or member 'i915' not described in 'i915_perf_ioctl_version' Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/i915_vma_resource.h:129: warning: Function parameter or member 'wakeref' not described in 'i915_vma_resource' Signed-off-by:
-
Jani Nikula authored
The parameters aren't documented, and the file isn't included in Sphinx build anyway, so demote the kernel-doc to a regular comment. drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'OP' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'COND' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'US' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmin' not described in '__wait_for' drivers/gpu/drm/i915/i915_utils.h:284: warning: Function parameter or member 'Wmax' not described in '__wait_for' Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/i915_vma.h:145: warning: expecting prototype for i915_vma_offset(). Prototype was for i915_vma_size() instead Signed-off-by:
-
Jani Nikula authored
drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: Function parameter or member 'conf' not described in 'intel_vgpu_alloc_resource' drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: Excess function parameter 'param' description in 'intel_vgpu_alloc_resource' Signed-off-by:
-
- 03 May, 2023 2 commits
-
-
John Harrison authored
GuC based register dumps in error capture logs were basically broken for virtual engines. This can be seen in igt@gem_exec_balancer@hang: [IGT] gem_exec_balancer: starting subtest hang [drm] GPU HANG: ecode 12:4:e1524110, in gem_exec_balanc [6388] [drm] GT0: GUC: No register capture node found for 0x1005 / 0xFEDC311D [drm] GPU HANG: ecode 12:4:00000000, in gem_exec_balanc [6388] [IGT] gem_exec_balancer: exiting, ret=0 The test causes a hang on both engines of a virtual engine context. The engine instance zero hang gets a valid error capture but the non-instance-zero hang does not. Fix that by scanning through the list of pending register captures when a hang notification for a virtual engine is received. That way, the hang can be assigned to the correct physical engine prior to starting the error capture process. So later on, when the error capture handler tries to find the engine register list, it looks for one on the correct engine. Also, sneak in a missing blank line before a comment in the node search code. v2: Fix null pointer deref on non-GuC platforms. Signed-off-by:
-
John Harrison authored
Don't use 'xe_lp*' prefixes for register lists that are common with Gen8. Don't add Xe only GSC registers to pre-Xe devices that don't even have a GSC engine. Fix Xe_LP name. Don't use GEN9 as a prefix for register lists that contain all GEN8 registers. Rename the 'default_' register list prefix to 'gen8_' as that is the more accurate name. Signed-off-by:
-
