- 03 Feb, 2017 28 commits
-
-
Harsh Jain authored
Initialise variable after null check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Harsh Jain authored
Typecast the pointer with correct structure. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Harsh Jain authored
Update priorities to 3000 Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Harsh Jain authored
Change cipher algos flags to CRYPTO_ALG_TYPE_ABLKCIPHER. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Harsh Jain authored
1 Block of encrption can be done with aes-generic. no need of cbc(aes). This patch replaces cbc(aes-generic) with aes-generic. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Harsh Jain authored
The first argument to list_for_each_entry cannot be NULL. Generated by: scripts/coccinelle/iterators/itnull.cocci Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Harsh Jain authored
Change assign flowc id to each outgoing request.Firmware use flowc id to schedule each request onto HW. FW reply may miss without this change. Reviewed-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
When VERBOSE_DEBUG is defined and SHA_FLAGS_DUMP_REG flag is set in dd->flags, this patch prints the register names and values when performing IO accesses. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
This patchs allows to combine the AES and SHA hardware accelerators on some Atmel SoCs. Doing so, AES blocks are only written to/read from the AES hardware. Those blocks are also transferred from the AES to the SHA accelerator internally, without additionnal accesses to the system busses. Hence, the AES and SHA accelerators work in parallel to process all the data blocks, instead of serializing the process by (de)crypting those blocks first then authenticating them after like the generic crypto/authenc.c driver does. Of course, both the AES and SHA hardware accelerators need to be available before we can start to process the data blocks. Hence we use their crypto request queue to synchronize both drivers. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
This patch fixes the value returned by atmel_aes_handle_queue(), which could have been wrong previously when the crypto request was started synchronously but became asynchronous during the ctx->start() call. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
This patch adds support to the hmac(shaX) algorithms. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
This patch adds a simple function to perform data transfer with the DMA controller. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
This patch adds a simple function to perform data transfer with PIO, hence handled by the CPU. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
This patch defines an alias macro to SHA_MR_MODE_PDC, which is not suited for DMA usage. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
This patch simply defines a helper function to test the 'Data Ready' flag of the Status Register. It also gives a chance for the crypto request to be processed synchronously if this 'Data Ready' flag is already set when polling the Status Register. Indeed, running synchronously avoid the latency of the 'Data Ready' interrupt. When the 'Data Ready' flag has not been set yet, we enable the associated interrupt and resume processing the crypto request asynchronously from the 'done' task just as before. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
This patch modifies the SHA_FLAGS_SHA* flags: those algo flags are now organized as values of a single bitfield instead of individual bits. This allows to reduce the number of bits needed to encode all possible values. Also the new values match the SHA_MR_ALGO_SHA* values hence the algorithm bitfield of the SHA_MR register could simply be set with: mr = (mr & ~SHA_FLAGS_ALGO_MASK) | (ctx->flags & SHA_FLAGS_ALGO_MASK) Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
This patch is a transitional patch. It updates atmel_sha_done_task() to make it more generic. Indeed, it adds a new .resume() member in the atmel_sha_dev structure. This hook is called from atmel_sha_done_task() to resume processing an asynchronous request. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
This patch is a transitional patch. It splits the atmel_sha_handle_queue() function. Now atmel_sha_handle_queue() only manages the request queue and calls a new .start() hook from the atmel_sha_ctx structure. This hook allows to implement different kind of requests still handled by a single queue. Also when the req parameter of atmel_sha_handle_queue() refers to the very same request as the one returned by crypto_dequeue_request(), the queue management now gives a chance to this crypto request to be handled synchronously, hence reducing latencies. The .start() hook returns 0 if the crypto request was handled synchronously and -EINPROGRESS if the crypto request still need to be handled asynchronously. Besides, the new .is_async member of the atmel_sha_dev structure helps tagging this asynchronous state. Indeed, the req->base.complete() callback should not be called if the crypto request is handled synchronously. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Cyrille Pitchen authored
This is a transitional patch: it creates the atmel_sha_find_dev() function, which will be used in further patches to share the source code responsible for finding a Atmel SHA device. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Rabin Vincent authored
The documentation states that crypto_ahash_reqsize() provides the size of the state structure used by crypto_ahash_export(). But it's actually crypto_ahash_statesize() which provides this size. Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Herbert Xu authored
Merge the crypto tree to pick up arm64 output IV patch.
-
Harsh Jain authored
Check keylen before copying salt to avoid wrap around of Integer. Signed-off-by: Harsh Jain <harsh@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Harsh Jain authored
Kernel panics when userspace program try to access AEAD interface. Remove node from Linked List before freeing its memory. Cc: <stable@vger.kernel.org> Signed-off-by: Harsh Jain <harsh@chelsio.com> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
When aesni is built as a module together with pcbc, the pcbc module must be present for aesni to load. However, the pcbc module may not be present for reasons such as its absence on initramfs. This patch allows the aesni to function even if the pcbc module is enabled but not present. Reported-by: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Gary R Hook authored
Eliminate a double-add by creating a new list to manage command descriptors when created; move the descriptor to the pending list when the command is submitted. Cc: <stable@vger.kernel.org> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Gary R Hook authored
An I/O page fault occurs when the IOMMU is enabled on a system that supports the v5 CCP. DMA operations use a Request ID value that does not match what is expected by the IOMMU, resulting in the I/O page fault. Setting the Request ID value to 0 corrects this issue. Cc: <stable@vger.kernel.org> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Harsh Jain authored
Ensure dev is allocated for crypto uld context before using the device for crypto operations. Cc: <stable@vger.kernel.org> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Harsh Jain authored
Save DMA mapped sg list addresses to request context buffer. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 02 Feb, 2017 2 commits
-
-
Giovanni Cabiddu authored
Zero embedded ram in DH85x devices. This is not needed for newer generations as it is done by HW. Cc: <stable@vger.kernel.org> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Giovanni Cabiddu authored
Some accelerators of the c62x series have only two bars. This patch skips BAR0 if the accelerator does not have it. Cc: <stable@vger.kernel.org> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 23 Jan, 2017 10 commits
-
-
Li Zhong authored
Some preemptible check warnings were reported from enable_kernel_vsx(). This patch disables preemption in aes_ctr.c before enabling vsx, and they are now consistent with other files in the same directory. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ryder Lee authored
This patch adds support to the GCM mode. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ryder Lee authored
This patch adds support to the CTR mode. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ryder Lee authored
Dummy patch to fix typo and indentation. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ryder Lee authored
This patch only regroup functions by usage. This will help to integrate the GCM support patch later by adjusting some shared code section, such as common code which will be reused by GCM, AES mode setting, and DMA transfer. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ryder Lee authored
This patch introduces a new callback 'resume' in the struct mtk_aes_rec. This callback is run to resume/complete the processing of the crypto request when woken up by AES interrupts when DMA completion. This callback will help implementing the GCM mode support in further patches. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ryder Lee authored
This patch changes mtk_aes_handle_queue() to make it more generic. The function argument is now a pointer to struct crypto_async_request, which is the common base of struct ablkcipher_request and struct aead_request. Also this patch introduces struct mtk_aes_base_ctx which will be the common base of all the transformation contexts. Hence the very same queue will be used to manage both block cipher and AEAD requests (such as gcm and authenc implemented in further patches). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ryder Lee authored
This patch fixes mtk_aes_xmit() data transfer bug. The original function uses the same loop and ring->pos to handle both command and result descriptors. But this produces incomplete results when src.sg_len != dst.sg_len. To solve the problem, we splits the descriptors into different loops and uses cmd_pos and res_pos to record them respectively. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ryder Lee authored
This patch moves hardware control block members from mtk_*_rec to transformation context and refines related definition. This makes operational context to manage its own control information easily for each DMA transfer. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Denys Vlasenko authored
A lot of asm-optimized routines in arch/x86/crypto/ keep its constants in .data. This is wrong, they should be on .rodata. Mnay of these constants are the same in different modules. For example, 128-bit shuffle mask 0x000102030405060708090A0B0C0D0E0F exists in at least half a dozen places. There is a way to let linker merge them and use just one copy. The rules are as follows: mergeable objects of different sizes should not share sections. You can't put them all in one .rodata section, they will lose "mergeability". GCC puts its mergeable constants in ".rodata.cstSIZE" sections, or ".rodata.cstSIZE.<object_name>" if -fdata-sections is used. This patch does the same: .section .rodata.cst16.SHUF_MASK, "aM", @progbits, 16 It is important that all data in such section consists of 16-byte elements, not larger ones, and there are no implicit use of one element from another. When this is not the case, use non-mergeable section: .section .rodata[.VAR_NAME], "a", @progbits This reduces .data by ~15 kbytes: text data bss dec hex filename 11097415 2705840 2630712 16433967 fac32f vmlinux-prev.o 11112095 2690672 2630712 16433479 fac147 vmlinux.o Merged objects are visible in System.map: ffffffff81a28810 r POLY ffffffff81a28810 r POLY ffffffff81a28820 r TWOONE ffffffff81a28820 r TWOONE ffffffff81a28830 r PSHUFFLE_BYTE_FLIP_MASK <- merged regardless of ffffffff81a28830 r SHUF_MASK <------------- the name difference ffffffff81a28830 r SHUF_MASK ffffffff81a28830 r SHUF_MASK .. ffffffff81a28d00 r K512 <- merged three identical 640-byte tables ffffffff81a28d00 r K512 ffffffff81a28d00 r K512 Use of object names in section name suffixes is not strictly necessary, but might help if someday link stage will use garbage collection to eliminate unused sections (ld --gc-sections). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Josh Poimboeuf <jpoimboe@redhat.com> CC: Xiaodong Liu <xiaodong.liu@intel.com> CC: Megha Dey <megha.dey@intel.com> CC: linux-crypto@vger.kernel.org CC: x86@kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-