The implement is exactly the same as rk808_set_suspend_voltage, so just
use rk808_set_suspend_voltage instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20191008010628.8513-3-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

The default in rk817_set_ramp_delay is 25MV rather than 10MV.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20191008010628.8513-2-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

These regulator_ops variables never need to be modified, make them const so
compiler can put them to .rodata.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20191008010628.8513-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

gpiod_get_from_of_node() is being retired in favor of
fwnode_gpiod_get_index(), that behaves similar to gpiod_get_index(),
but can work with arbitrary firmware node. It will also be able to
support secondary software nodes.

Let's switch this driver over.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-8-dmitry.torokhov@gmail.comReviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

devm_fwnode_get_index_gpiod_from_child() is going away as the name is
too unwieldy, let's switch to using the new devm_fwnode_gpiod_get().

Note that we no longer need to check for NULL as devm_fwnode_gpiod_get()
will return -ENOENT if GPIO is missing.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-7-dmitry.torokhov@gmail.comReviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

devm_gpiod_get_from_of_node() is being retired in favor of
devm_fwnode_gpiod_get_index(), that behaves similar to
devm_gpiod_get_index(), but can work with arbitrary firmware node. It
will also be able to support secondary software nodes.

Let's switch this driver over.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20191004231017.130290-6-dmitry.torokhov@gmail.comReviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

devm_gpiod_get_from_of_node() is being retired in favor of
devm_fwnode_gpiod_get_index(), that behaves similar to
devm_gpiod_get_index(), but can work with arbitrary firmware node. It
will also be able to support secondary software nodes.

Let's switch this driver over.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-5-dmitry.torokhov@gmail.comReviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

devm_gpiod_get_from_of_node() is being retired in favor of
devm_fwnode_gpiod_get_index(), that behaves similar to
devm_gpiod_get_index(), but can work with arbitrary firmware node. It
will also be able to support secondary software nodes.

Let's switch this driver over.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-4-dmitry.torokhov@gmail.comReviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

devm_gpiod_get_from_of_node() is being retired in favor of
[devm_]fwnode_gpiod_get_index(), that behaves similar to
devm_gpiod_get_index(), but can work with arbitrary firmware node. It
will also be able to support secondary software nodes.

Let's switch this driver over.

Note that now that we have a good non-devm API for getting GPIO from
arbitrary firmware node, there is no reason to use devm API here as
regulator core takes care of managing lifetime of "enable" GPIO and we
were immediately detaching requested GPIO from devm anyway.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-3-dmitry.torokhov@gmail.comReviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

devm_gpiod_get_from_of_node() is being retired in favor of
devm_fwnode_gpiod_get_index(), that behaves similar to
devm_gpiod_get_index(), but can work with arbitrary firmware node. It
will also be able to support secondary software nodes.

Let's switch this driver over.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20191004231017.130290-2-dmitry.torokhov@gmail.comReviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'ib-fwnode-gpiod-get-index' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into regulator-5.5

Only the desc field is really used, so use struct regulator_desc instead.
Then struct pbias_regulator_data can be removed.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20191007114320.20977-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

It's more straightforward to use for statement here.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Link: https://lore.kernel.org/r/20191007115009.25672-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for PM6150/PM6150L regulators. This ensures
that consumers are able to modify the physical state of PMIC
regulators.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Link: https://lore.kernel.org/r/1570183734-30706-3-git-send-email-kgunda@codeaurora.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add PM6150 and PM6150L compatibles for Qualcomm SC7180 platfrom.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Link: https://lore.kernel.org/r/1570183734-30706-2-git-send-email-kgunda@codeaurora.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Inside function max8907_regulator_probe(), variable val could
be uninitialized if regmap_read() fails. However, val is used
later in the if statement to decide the content written to
"pmic", which is potentially unsafe.
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Link: https://lore.kernel.org/r/20191003175813.16415-1-yzhai003@ucr.eduSigned-off-by: Mark Brown <broonie@kernel.org>

Correct the PMIC5 BoB min voltage from 0.3V to 3V. Also correct
the voltage selector accordingly.
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Link: https://lore.kernel.org/r/1570184215-5355-1-git-send-email-kgunda@codeaurora.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This introduces fwnode_gpiod_get_index() that iterates through common gpio
suffixes when trying to locate a GPIO within a given firmware node.

We also switch devm_fwnode_gpiod_get_index() to call
fwnode_gpiod_get_index() instead of iterating through GPIO suffixes on
its own.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20190913032240.50333-3-dmitry.torokhov@gmail.comReviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

devm_fwnode_get_index_gpiod_from_child() is too long, besides the fwnode
in question does not have to be a child of device node. Let's rename it
to devm_fwnode_gpiod_get_index() and keep the old name for compatibility
for now.

Also let's add a devm_fwnode_gpiod_get() wrapper as majority of the
callers need a single GPIO.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20190913032240.50333-2-dmitry.torokhov@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The description of "regulator-boot-on" was a little unclear, at least
to me.  Did this property mean that we should turn the regulator on at
boot?  Or perhaps it was intended only to be used for regulators where
we couldn't read the state at bootup to indicate what state we should
assume?  The answer, it turns out, is both [1].

Let's document this.

[1] https://lore.kernel.org/r/20190923181431.GU2036@sirena.org.ukSigned-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191001124531.v2.1.Ice34ad5970a375c3c03cb15c3859b3ee501561bf@changeidSigned-off-by: Mark Brown <broonie@kernel.org>

This fixes device probing when built as a module
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Link: https://lore.kernel.org/r/46ce3400e227dd88d51486c02a6152c9ec52acbb.1569875042.git.agx@sigxcpu.orgSigned-off-by: Mark Brown <broonie@kernel.org>

In function pfuze100_regulator_probe(), variable "val" could be
initialized if regmap_read() fails. However, "val" is used to
decide the control flow later in the if statement, which is
potentially unsafe.
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@ucr.eduSigned-off-by: Mark Brown <broonie@kernel.org>

The VDDCORE regulator takes a good length of time to discharge down, so
add an on_off_delay to ensure DCVDD is removed before it is powered on
again.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191001132017.1785-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/pcap-regulator.c:89:27: warning:
 SW3_table defined but not used [-Wunused-const-variable=]

It is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190928085540.45332-1-yuehaibing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The sleep flag bit decides the mode for BUCK_MODE_MANUAL case, simplify
the logic as the result is the same.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20190926055128.23434-2-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use of_device_get_match_data to simplify the code a bit.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20190925101256.19030-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

This Power IC is used in combination with various PMIC combos,
generally found on boards with MSM8992, MSM8994, MSM8996,
MSM8956, MSM8976 and others, usually at address 0x5 on the SPMI
bus, and its usual usage is to provide power to the GPU and/or
to the CPU clusters (APC0/APC1).
Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20190921095043.62593-6-kholk11@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The PM8950 provides 6 SMPS regulators, of which 5 HFSMPS
and one FTSMPS2.5 (s5), and 23 LDOs.
Add these to the RPM regulator driver.
Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20190921095043.62593-4-kholk11@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The PM8950 has 5 HFSMPS, 1 FTSMPS2.5 (s5, controlling APC voltage)
and 23 LDO regulators.
Add the configuration for this chip.
Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com>
Link: https://lore.kernel.org/r/20190921095043.62593-3-kholk11@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Compatible property is not of type 'string', so remove const:
from it.
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1568875145-2864-1-git-send-email-pragnesh.patel@sifive.comSigned-off-by: Mark Brown <broonie@kernel.org>

ti_abb_wait_txdone() may return -ETIMEDOUT when ti_abb_check_txdone()
returns true in the latest iteration of the while loop because the timeout
value is abb->settling_time + 1. Similarly, ti_abb_clear_all_txdone() may
return -ETIMEDOUT when ti_abb_check_txdone() returns false in the latest
iteration of the while loop. Fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20190929095848.21960-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pull btrfs fixes from David Sterba:
 "A bunch of fixes that accumulated in recent weeks, mostly material for
  stable.

  Summary:

   - fix for regression from 5.3 that prevents to use balance convert
     with single profile

   - qgroup fixes: rescan race, accounting leak with multiple writers,
     potential leak after io failure recovery

   - fix for use after free in relocation (reported by KASAN)

   - other error handling fixups"

* tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
  btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
  btrfs: Fix a regression which we can't convert to SINGLE profile
  btrfs: relocation: fix use-after-free on dead relocation roots
  Btrfs: fix race setting up and completing qgroup rescan workers
  Btrfs: fix missing error return if writeback for extent buffer never started
  btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer
  Btrfs: fix selftests failure due to uninitialized i_mode in test inodes

Pull csky updates from Guo Ren:
 "This round of csky subsystem just some fixups:

   - Fix mb() synchronization problem

   - Fix dma_alloc_coherent with PAGE_SO attribute

   - Fix cache_op failed when cross memory ZONEs

   - Optimize arch_sync_dma_for_cpu/device with dma_inv_range

   - Fix ioremap function losing

   - Fix arch_get_unmapped_area() implementation

   - Fix defer cache flush for 610

   - Support kernel non-aligned access

   - Fix 610 vipt cache flush mechanism

   - Fix add zero_fp fixup perf backtrace panic

   - Move static keyword to the front of declaration

   - Fix csky_pmu.max_period assignment

   - Use generic free_initrd_mem()

   - entry: Remove unneeded need_resched() loop"

* tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux:
  csky: Move static keyword to the front of declaration
  csky: entry: Remove unneeded need_resched() loop
  csky: Fixup csky_pmu.max_period assignment
  csky: Fixup add zero_fp fixup perf backtrace panic
  csky: Use generic free_initrd_mem()
  csky: Fixup 610 vipt cache flush mechanism
  csky: Support kernel non-aligned access
  csky: Fixup defer cache flush for 610
  csky: Fixup arch_get_unmapped_area() implementation
  csky: Fixup ioremap function losing
  csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range
  csky/dma: Fixup cache_op failed when cross memory ZONEs
  csky: Fixup dma_alloc_coherent with PAGE_SO attribute
  csky: Fixup mb() synchronization problem

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Pull tracing fixes from Steven Rostedt:
 "A few more tracing fixes:

   - Fix a buffer overflow by checking nr_args correctly in probes

   - Fix a warning that is reported by clang

   - Fix a possible memory leak in error path of filter processing

   - Fix the selftest that checks for failures, but wasn't failing

   - Minor clean up on call site output of a memory trace event"

* tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests/ftrace: Fix same probe error test
  mm, tracing: Print symbol name for call_site in trace events
  tracing: Have error path in predicate_parse() free its allocated memory
  tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro
  tracing/probe: Fix to check the difference of nr_args before adding probe

Pull more MMC updates from Ulf Hansson:
 "A couple more updates/fixes for MMC:

   - sdhci-pci: Add Genesys Logic GL975x support

   - sdhci-tegra: Recover loss in throughput for DMA

   - sdhci-of-esdhc: Fix DMA bug"

* tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: host: sdhci-pci: Add Genesys Logic GL975x support
  mmc: tegra: Implement ->set_dma_mask()
  mmc: sdhci: Let drivers define their DMA mask
  mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence
  mmc: sdhci: improve ADMA error reporting

Move the static keyword to the front of declaration of
csky_pmu_of_device_ids, and resolve the following compiler
warning that can be seen when building with warnings
enabled (W=1):

arch/csky/kernel/perf_event.c:1340:1: warning:
  ‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Guo Ren <guoren@kernel.org>

Since the enabling and disabling of IRQs within preempt_schedule_irq()
is contained in a need_resched() loop, we don't need the outer arch
code loop.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Guo Ren <guoren@kernel.org>