- 13 Sep, 2012 2 commits
-
-
Yaniv Rosner authored
Separate the interrupt setting part of each external PHY to a specific function. This allows calling the interrupt setting in case of link-flap avoidance, since some link owners may not enable the interrupt on their own. Signed-off-by:
Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://1984.lsi.us.es/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains four Netfilter updates, mostly targeting to fix issues added with IPv6 NAT, and one little IPVS update for net-next: * Remove unneeded conditional free of skb in nfnetlink_queue, from Wei Yongjun. * One semantic path from coccinelle detected the use of list_del + INIT_LIST_HEAD, instead of list_del_init, again from Wei Yongjun. * Fix out-of-bound memory access in the NAT address selection, from Florian Westphal. This was introduced with the IPv6 NAT patches. * Two fixes for crashes that were introduced in the recently merged IPv6 NAT support, from myself. ==================== Signed-off-by:
-
- 12 Sep, 2012 1 commit
-
-
Pablo Neira Ayuso authored
(c7232c99 netfilter: add protocol independent NAT core) added incorrect locking for the module auto-load case in ctnetlink_parse_nat. That function is always called from ctnetlink_create_conntrack which requires no locking. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
- 10 Sep, 2012 17 commits
-
-
Eric Dumazet authored
commit b6069a95 (filter: add MOD operation) added generic support for modulus operation in BPF. This patch brings JIT support for x86_64 Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: George Bakos <gbakos@alpinista.org> Signed-off-by:
-
Yuval Mintz authored
This patch enables boards with 54618SE phys and a sufficiently new firmware to use native EEE instead of auto-greeen. Signed-off-by:
-
Yuval Mintz authored
Signed-off-by:
-
Yuval Mintz authored
In order to lay the foundation for 1G EEE support, several segments of code which are common to both 1G and 10G EEE configurations were extracted from the 10G EEE configuration flow to their own functions. E.g., bnx2x_eee_initial_config, bnx2x_eee_advertise, bnx2x_eee_disable, etc. The rest of the EEE functions were relocated and placed in a single, continuous section of the file. Signed-off-by:
-
Yuval Mintz authored
Prevent functions from disabling EEE to other functions using other ports. Signed-off-by:
-
Yuval Mintz authored
This patch aligns the EEE status with that of all other link properties, by changing the way its accessed - instead of a direct read to the shared memory, each function maintain its own copy locally. Signed-off-by:
-
Amerigo Wang authored
After this commit: commit 97cac082 Author: David S. Miller <davem@davemloft.net> Date: Mon Jul 2 22:43:47 2012 -0700 ipv6: Store route neighbour in rt6_info struct. we no longer use RCU to protect route neighbour. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
Duan Jiong authored
a lot of code has either the memset or an inefficient copy from a static array that contains the all-zeros Ethernet address. Introduce help function eth_zero_addr() to fill an address with all zeros, making the code clearer and allowing us to get rid of some constant arrays. Signed-off-by:
Duan Jiong <djduanjiong@gmail.com> Signed-off-by:
-
Michael Chan authored
Update version to 2.5.13. Reviewed-by:
Eddie Wai <eddie.wai@broadcom.com> Reviewed-by:
Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Michael Chan authored
To save memory and to exit IRQ loop quicker on devices that don't support FCoE. Reviewed-by:
-
Michael Chan authored
This will make it easier to exit IRQ loop and re-arm IRQ on devices that don't support FCoE. Reviewed-by:
-
Michael Chan authored
This will free up unneeded memory. Reviewed-by:
-
Michael Chan authored
These functions are needed to free up memory when the rings are no longer needed. Reviewed-by:
-
Eric Dumazet authored
Add a new ALU opcode, to compute a modulus. Commit ffe06c17 used an ancillary to implement XOR_X, but here we reserve one of the available ALU opcode to implement both MOD_X and MOD_K Signed-off-by:
George Bakos <gbakos@alpinista.org> Cc: Jay Schulist <jschlst@samba.org> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Eric W. Biederman authored
When a policy expiration is triggered from user space the request travels through km_policy_expired and ultimately into xfrm_exp_policy_notify which calls build_polexpire. build_polexpire uses the netlink port passed to km_policy_expired as the source port for the netlink message it builds. When a state expiration is triggered from user space the request travles through km_state_expired and ultimately into xfrm_exp_state_notify which calls build_expire. build_expire uses the netlink port passed to km_state_expired as the source port for the netlink message it builds. Pass nlh->nlmsg_pid from the user generated netlink message that requested the expiration to km_policy_expired and km_state_expired instead of current->pid which is not a netlink port number. Cc: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Eric W. Biederman authored
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Wei Yongjun authored
Using list_del_init() instead of list_del() + INIT_LIST_HEAD(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
- 09 Sep, 2012 2 commits
-
-
Wei Yongjun authored
Remove pointless conditional before kfree_skb(). Signed-off-by:
-
Florian Westphal authored
include/linux/jhash.h:138:16: warning: array subscript is above array bounds [jhash2() expects the number of u32 in the key] Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 08 Sep, 2012 2 commits
-
-
Pablo Neira Ayuso authored
This patch defines netlink_kernel_create as a wrapper function of __netlink_kernel_create to hide the struct module *me parameter (which seems to be THIS_MODULE in all existing netlink subsystems). Suggested by David S. Miller. Signed-off-by:
-
Pablo Neira Ayuso authored
Replace netlink_set_nonroot by one new field `flags' in struct netlink_kernel_cfg that is passed to netlink_kernel_create. This patch also renames NL_NONROOT_* to NL_CFG_F_NONROOT_* since now the flags field in nl_table is generic (so we can add more flags if needed in the future). Also adjust all callers in the net-next tree to use these flags instead of netlink_set_nonroot. Signed-off-by:
-
- 07 Sep, 2012 9 commits
-
-
Timur Tabi authored
mdio-mux-mmioreg.c uses function of_address_to_resource(), which is defined in linux/of_address.h. This fixes a compilation error: drivers/net/phy/mdio-mux-mmioreg.c: In function 'mdio_mux_mmioreg_probe': drivers/net/phy/mdio-mux-mmioreg.c:83:2: error: implicit declaration of function 'of_address_to_resource' Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
Eric Dumazet authored
We dont use jhash anymore since route cache removal, so we can get rid of get_random_bytes() calls for rt_genid changes. Signed-off-by:
-
Bjørn Mork authored
Refactoring the bind code lets us use a common driver_info struct for all supported devices, simplifying the code a bit. The real advantage is that devices using the CDC ECM interface layout now also can be added dynamically using the new_id sysfs interface. This simplifies testing of new devices. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
QMI requests exceeding 1500 bytes are possible and device firmware does not handle fragmented messages very well. It is therefore necessary to increase the maximum message size from the current 512 bytes. The protocol message size limit is not documented in any publicly known source, but the out of tree driver from CodeAurora use 4 kB. This is therefore chosen as the new arbitrary default until the real limit is known. This should allow any QMI message to be transmitted without fragmentation, fixing known issues with GPS assistance data upload. Signed-off-by:
-
Nicolas Dichtel authored
Since route cache deletion (89aef892), delay is no more used. Remove it. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
-
Eric W. Biederman authored
Passing uids and gids on NETLINK_CB from a process in one user namespace to a process in another user namespace can result in the wrong uid or gid being presented to userspace. Avoid that problem by passing kuids and kgids instead. - define struct scm_creds for use in scm_cookie and netlink_skb_parms that holds uid and gid information in kuid_t and kgid_t. - Modify scm_set_cred to fill out scm_creds by heand instead of using cred_to_ucred to fill out struct ucred. This conversion ensures userspace does not get incorrect uid or gid values to look at. - Modify scm_recv to convert from struct scm_creds to struct ucred before copying credential values to userspace. - Modify __scm_send to populate struct scm_creds on in the scm_cookie, instead of just copying struct ucred from userspace. - Modify netlink_sendmsg to copy scm_creds instead of struct ucred into the NETLINK_CB. Signed-off-by:
-
Eric Dumazet authored
igmp should call consume_skb() for all correctly processed packets, to avoid false dropwatch/drop_monitor false positives. Reported-by:
Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
It's the same problem that previous fix about blackhole and prohibit routes. When adding a throw route, it was handled like a classic route. Moreover, it was only possible to add this kind of routes by specifying an interface. Before the patch: $ ip route add throw 2001::2/128 RTNETLINK answers: No such device $ ip route add throw 2001::2/128 dev eth0 $ ip -6 route | grep 2001::2 2001::2 dev eth0 metric 1024 After: $ ip route add throw 2001::2/128 $ ip -6 route | grep 2001::2 throw 2001::2 dev lo metric 1024 error -11 Reported-by:
Markus Stenberg <markus.stenberg@iki.fi> Signed-off-by:
-
- 06 Sep, 2012 1 commit
-
-
Eric Dumazet authored
Fengguang Wu reported various panics and bisected to commit 8336886f (tcp: TCP Fast Open Server - support TFO listeners) Fix this by making sure socket is a TCP socket before accessing TFO data structures. [ 233.046014] kfree_debugcheck: out of range ptr ea6000000bb8h. [ 233.047399] ------------[ cut here ]------------ [ 233.048393] kernel BUG at /c/kernel-tests/src/stable/mm/slab.c:3074! [ 233.048393] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 233.048393] Modules linked in: [ 233.048393] CPU 0 [ 233.048393] Pid: 3929, comm: trinity-watchdo Not tainted 3.6.0-rc3+ #4192 Bochs Bochs [ 233.048393] RIP: 0010:[<ffffffff81169653>] [<ffffffff81169653>] kfree_debugcheck+0x27/0x2d [ 233.048393] RSP: 0018:ffff88000facbca8 EFLAGS: 00010092 [ 233.048393] RAX: 0000000000000031 RBX: 0000ea6000000bb8 RCX: 00000000a189a188 [ 233.048393] RDX: 000000000000a189 RSI: ffffffff8108ad32 RDI: ffffffff810d30f9 [ 233.048393] RBP: ffff88000facbcb8 R08: 0000000000000002 R09: ffffffff843846f0 [ 233.048393] R10: ffffffff810ae37c R11: 0000000000000908 R12: 0000000000000202 [ 233.048393] R13: ffffffff823dbd5a R14: ffff88000ec5bea8 R15: ffffffff8363c780 [ 233.048393] FS: 00007faa6899c700(0000) GS:ffff88001f200000(0000) knlGS:0000000000000000 [ 233.048393] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 233.048393] CR2: 00007faa6841019c CR3: 0000000012c82000 CR4: 00000000000006f0 [ 233.048393] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 233.048393] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 233.048393] Process trinity-watchdo (pid: 3929, threadinfo ffff88000faca000, task ffff88000faec600) [ 233.048393] Stack: [ 233.048393] 0000000000000000 0000ea6000000bb8 ffff88000facbce8 ffffffff8116ad81 [ 233.048393] ffff88000ff588a0 ffff88000ff58850 ffff88000ff588a0 0000000000000000 [ 233.048393] ffff88000facbd08 ffffffff823dbd5a ffffffff823dbcb0 ffff88000ff58850 [ 233.048393] Call Trace: [ 233.048393] [<ffffffff8116ad81>] kfree+0x5f/0xca [ 233.048393] [<ffffffff823dbd5a>] inet_sock_destruct+0xaa/0x13c [ 233.048393] [<ffffffff823dbcb0>] ? inet_sk_rebuild_header +0x319/0x319 [ 233.048393] [<ffffffff8231c307>] __sk_free+0x21/0x14b [ 233.048393] [<ffffffff8231c4bd>] sk_free+0x26/0x2a [ 233.048393] [<ffffffff825372db>] sctp_close+0x215/0x224 [ 233.048393] [<ffffffff810d6835>] ? lock_release+0x16f/0x1b9 [ 233.048393] [<ffffffff823daf12>] inet_release+0x7e/0x85 [ 233.048393] [<ffffffff82317d15>] sock_release+0x1f/0x77 [ 233.048393] [<ffffffff82317d94>] sock_close+0x27/0x2b [ 233.048393] [<ffffffff81173bbe>] __fput+0x101/0x20a [ 233.048393] [<ffffffff81173cd5>] ____fput+0xe/0x10 [ 233.048393] [<ffffffff810a3794>] task_work_run+0x5d/0x75 [ 233.048393] [<ffffffff8108da70>] do_exit+0x290/0x7f5 [ 233.048393] [<ffffffff82707415>] ? retint_swapgs+0x13/0x1b [ 233.048393] [<ffffffff8108e23f>] do_group_exit+0x7b/0xba [ 233.048393] [<ffffffff8108e295>] sys_exit_group+0x17/0x17 [ 233.048393] [<ffffffff8270de10>] tracesys+0xdd/0xe2 [ 233.048393] Code: 59 01 5d c3 55 48 89 e5 53 41 50 0f 1f 44 00 00 48 89 fb e8 d4 b0 f0 ff 84 c0 75 11 48 89 de 48 c7 c7 fc fa f7 82 e8 0d 0f 57 01 <0f> 0b 5f 5b 5d c3 55 48 89 e5 0f 1f 44 00 00 48 63 87 d8 00 00 [ 233.048393] RIP [<ffffffff81169653>] kfree_debugcheck+0x27/0x2d [ 233.048393] RSP <ffff88000facbca8> Reported-by:
Fengguang Wu <wfg@linux.intel.com> Tested-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
H.K. Jerry Chu <hkchu@google.com> Signed-off-by:
-
- 05 Sep, 2012 6 commits
-
-
Nicolas Dichtel authored
When adding a blackhole or a prohibit route, they were handling like classic routes. Moreover, it was only possible to add this kind of routes by specifying an interface. Bug already reported here: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=498498 Before the patch: $ ip route add blackhole 2001::1/128 RTNETLINK answers: No such device $ ip route add blackhole 2001::1/128 dev eth0 $ ip -6 route | grep 2001 2001::1 dev eth0 metric 1024 After: $ ip route add blackhole 2001::1/128 $ ip -6 route | grep 2001 blackhole 2001::1 dev lo metric 1024 error -22 v2: wrong patch v3: add a field fc_type in struct fib6_config to store RTN_* type Signed-off-by:
-
Sathya Perla authored
This patch allows code to handle the PCIe AER capability. The PCI callbacks for error handling/reset/recovery already exist in be2net and have been tested with EEH/ppc. This patch has been tested using the aer-inject tool. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Eric Dumazet authored
It seems we need to provide ability for stacked devices to use specific lock_class_key for sch->busylock We could instead default l2tpeth tx_queue_len to 0 (no qdisc), but a user might use a qdisc anyway. (So same fixes are probably needed on non LLTX stacked drivers) Noticed while stressing L2TPV3 setup : ====================================================== [ INFO: possible circular locking dependency detected ] 3.6.0-rc3+ #788 Not tainted ------------------------------------------------------- netperf/4660 is trying to acquire lock: (l2tpsock){+.-...}, at: [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] but task is already holding lock: (&(&sch->busylock)->rlock){+.-...}, at: [<ffffffff81596595>] dev_queue_xmit+0xd75/0xe00 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&(&sch->busylock)->rlock){+.-...}: [<ffffffff810a5df0>] lock_acquire+0x90/0x200 [<ffffffff817499fc>] _raw_spin_lock_irqsave+0x4c/0x60 [<ffffffff81074872>] __wake_up+0x32/0x70 [<ffffffff8136d39e>] tty_wakeup+0x3e/0x80 [<ffffffff81378fb3>] pty_write+0x73/0x80 [<ffffffff8136cb4c>] tty_put_char+0x3c/0x40 [<ffffffff813722b2>] process_echoes+0x142/0x330 [<ffffffff813742ab>] n_tty_receive_buf+0x8fb/0x1230 [<ffffffff813777b2>] flush_to_ldisc+0x142/0x1c0 [<ffffffff81062818>] process_one_work+0x198/0x760 [<ffffffff81063236>] worker_thread+0x186/0x4b0 [<ffffffff810694d3>] kthread+0x93/0xa0 [<ffffffff81753e24>] kernel_thread_helper+0x4/0x10 -> #0 (l2tpsock){+.-...}: [<ffffffff810a5288>] __lock_acquire+0x1628/0x1b10 [<ffffffff810a5df0>] lock_acquire+0x90/0x200 [<ffffffff817498c1>] _raw_spin_lock+0x41/0x50 [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffffa021a802>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth] [<ffffffff815952b2>] dev_hard_start_xmit+0x502/0xa70 [<ffffffff815b63ce>] sch_direct_xmit+0xfe/0x290 [<ffffffff81595a05>] dev_queue_xmit+0x1e5/0xe00 [<ffffffff815d9d60>] ip_finish_output+0x3d0/0x890 [<ffffffff815db019>] ip_output+0x59/0xf0 [<ffffffff815da36d>] ip_local_out+0x2d/0xa0 [<ffffffff815da5a3>] ip_queue_xmit+0x1c3/0x680 [<ffffffff815f4192>] tcp_transmit_skb+0x402/0xa60 [<ffffffff815f4a94>] tcp_write_xmit+0x1f4/0xa30 [<ffffffff815f5300>] tcp_push_one+0x30/0x40 [<ffffffff815e6672>] tcp_sendmsg+0xe82/0x1040 [<ffffffff81614495>] inet_sendmsg+0x125/0x230 [<ffffffff81576cdc>] sock_sendmsg+0xdc/0xf0 [<ffffffff81579ece>] sys_sendto+0xfe/0x130 [<ffffffff81752c92>] system_call_fastpath+0x16/0x1b Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&sch->busylock)->rlock); lock(l2tpsock); lock(&(&sch->busylock)->rlock); lock(l2tpsock); *** DEADLOCK *** 5 locks held by netperf/4660: #0: (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff815e581c>] tcp_sendmsg+0x2c/0x1040 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff815da3e0>] ip_queue_xmit+0x0/0x680 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff815d9ac5>] ip_finish_output+0x135/0x890 #3: (rcu_read_lock_bh){.+....}, at: [<ffffffff81595820>] dev_queue_xmit+0x0/0xe00 #4: (&(&sch->busylock)->rlock){+.-...}, at: [<ffffffff81596595>] dev_queue_xmit+0xd75/0xe00 stack backtrace: Pid: 4660, comm: netperf Not tainted 3.6.0-rc3+ #788 Call Trace: [<ffffffff8173dbf8>] print_circular_bug+0x1fb/0x20c [<ffffffff810a5288>] __lock_acquire+0x1628/0x1b10 [<ffffffff810a334b>] ? check_usage+0x9b/0x4d0 [<ffffffff810a3f44>] ? __lock_acquire+0x2e4/0x1b10 [<ffffffff810a5df0>] lock_acquire+0x90/0x200 [<ffffffffa0208db2>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffff817498c1>] _raw_spin_lock+0x41/0x50 [<ffffffffa0208db2>] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffffa0208db2>] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [<ffffffffa021a802>] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth] [<ffffffff815952b2>] dev_hard_start_xmit+0x502/0xa70 [<ffffffff81594e0e>] ? dev_hard_start_xmit+0x5e/0xa70 [<ffffffff81595961>] ? dev_queue_xmit+0x141/0xe00 [<ffffffff815b63ce>] sch_direct_xmit+0xfe/0x290 [<ffffffff81595a05>] dev_queue_xmit+0x1e5/0xe00 [<ffffffff81595820>] ? dev_hard_start_xmit+0xa70/0xa70 [<ffffffff815d9d60>] ip_finish_output+0x3d0/0x890 [<ffffffff815d9ac5>] ? ip_finish_output+0x135/0x890 [<ffffffff815db019>] ip_output+0x59/0xf0 [<ffffffff815da36d>] ip_local_out+0x2d/0xa0 [<ffffffff815da5a3>] ip_queue_xmit+0x1c3/0x680 [<ffffffff815da3e0>] ? ip_local_out+0xa0/0xa0 [<ffffffff815f4192>] tcp_transmit_skb+0x402/0xa60 [<ffffffff815fa25e>] ? tcp_md5_do_lookup+0x18e/0x1a0 [<ffffffff815f4a94>] tcp_write_xmit+0x1f4/0xa30 [<ffffffff815f5300>] tcp_push_one+0x30/0x40 [<ffffffff815e6672>] tcp_sendmsg+0xe82/0x1040 [<ffffffff81614495>] inet_sendmsg+0x125/0x230 [<ffffffff81614370>] ? inet_create+0x6b0/0x6b0 [<ffffffff8157e6e2>] ? sock_update_classid+0xc2/0x3b0 [<ffffffff8157e750>] ? sock_update_classid+0x130/0x3b0 [<ffffffff81576cdc>] sock_sendmsg+0xdc/0xf0 [<ffffffff81162579>] ? fget_light+0x3f9/0x4f0 [<ffffffff81579ece>] sys_sendto+0xfe/0x130 [<ffffffff810a69ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8174a0b0>] ? _raw_spin_unlock_irq+0x30/0x50 [<ffffffff810757e3>] ? finish_task_switch+0x83/0xf0 [<ffffffff810757a6>] ? finish_task_switch+0x46/0xf0 [<ffffffff81752cb7>] ? sysret_check+0x1b/0x56 [<ffffffff81752c92>] system_call_fastpath+0x16/0x1b Signed-off-by: -
Wei Yongjun authored
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by:
-
Stephen Rothwell authored
Fixes this build error: net/ipv6/netfilter/nf_nat_l3proto_ipv6.c: In function 'nf_nat_ipv6_csum_recalc': net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:144:4: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration] Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Vipul Pandya authored
Removed duplicate definition for SGE_PF_KDOORBELL, SGE_INT_ENABLE3, PCIE_MEM_ACCESS_OFFSET registers. Moved the register field definitions around the register definition. Signed-off-by:
Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
Vipul Pandya <vipul@chelsio.com> Reviewed-by:
Sivakumar Subramani <sivasu@chelsio.com> Signed-off-by:
-
