- 06 Nov, 2021 40 commits
-
-
David Hildenbrand authored
CONFIG_MEMORY_HOTPLUG was marked BROKEN over one year and we just restricted it to 64 bit. Let's remove the unused x86 32bit implementation and simplify the Kconfig. Link: https://lkml.kernel.org/r/20210929143600.49379-7-david@redhat.comSigned-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Cc: Alex Shi <alexs@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Hildenbrand authored
These functions no longer exist. Link: https://lkml.kernel.org/r/20210929143600.49379-6-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
We don't support CONFIG_MEMORY_HOTPLUG on 32 bit and consequently not HIGHMEM. Let's remove any leftover code -- including the unused "status_change_nid_high" field part of the memory notifier. Link: https://lkml.kernel.org/r/20210929143600.49379-5-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
32 bit support is broken in various ways: for example, we can online memory that should actually go to ZONE_HIGHMEM to ZONE_MOVABLE or in some cases even to one of the other kernel zones. We marked it BROKEN in commit b59d02ed ("mm/memory_hotplug: disable the functionality for 32b") almost one year ago. According to that commit it might be broken at least since 2017. Further, there is hardly a sane use case nowadays. Let's just depend completely on 64bit, dropping the "BROKEN" dependency to make clear that we are not going to support it again. Next, we'll remove some HIGHMEM leftovers from memory hotplug code to clean up. Link: https://lkml.kernel.org/r/20210929143600.49379-4-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE. Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
David Hildenbrand authored
Patch series "mm/memory_hotplug: Kconfig and 32 bit cleanups". Some cleanups around CONFIG_MEMORY_HOTPLUG, including removing 32 bit leftovers of memory hotplug support. This patch (of 6): SPARSEMEM is the only possible memory model for x86-64, FLATMEM is not possible: config ARCH_FLATMEM_ENABLE def_bool y depends on X86_32 && !NUMA And X86_64_ACPI_NUMA (obviously) only supports x86-64: config X86_64_ACPI_NUMA def_bool y depends on X86_64 && NUMA && ACPI && PCI Let's just remove the CONFIG_X86_64_ACPI_NUMA dependency, as it does no longer make sense. Link: https://lkml.kernel.org/r/20210929143600.49379-2-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
Commit e83a437f ("mm/memory_hotplug: introduce "auto-movable" online policy") introduced a new memory online policy to automatically select a zone for memory blocks to be onlined. It added a way to set the active online policy and tunables for the auto-movable online policy. Follow-up commits tweaked the "auto-movable" policy to also consider memory device details when selecting zones for memory blocks to be onlined. Let's document the new toggles and how the two online policies we have work. [david@redhat.com: updates] Link: https://lkml.kernel.org/r/20211011082058.6076-4-david@redhat.com Link: https://lkml.kernel.org/r/20210930144117.23641-4-david@redhat.comSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by:
-
David Hildenbrand authored
We accidentially added a superfluous "s". Link: https://lkml.kernel.org/r/20210930144117.23641-3-david@redhat.com Fixes: ac3332c4 ("memory-hotplug.rst: complete admin-guide overhaul") Signed-off-by:
-
David Hildenbrand authored
Patch series "memory-hotplug.rst: document the "auto-movable" online policy". Now that the memory-hotplug.rst overhaul is upstream, proper documentation for the "auto-movable" online policy, documenting all new toggles and options. Along, two fixes for the original overhaul. This patch (of 3): We really want to refer to the "movable_node" kernel command line parameter here. Link: https://lkml.kernel.org/r/20210930144117.23641-2-david@redhat.com Fixes: ac3332c4 ("memory-hotplug.rst: complete admin-guide overhaul") Signed-off-by:
-
Tang Yizhou authored
online_policy_to_str is only used in memory_hotplug.c and should be defined as static. Link: https://lkml.kernel.org/r/20210913024534.26161-1-tangyizhou@huawei.comSigned-off-by:
Tang Yizhou <tangyizhou@huawei.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Reviewed-by:
-
David Hildenbrand authored
The madv_populate selftest currently builds with a warning when the local installed headers (via the distribution) don't include MADV_POPULATE_READ and MADV_POPULATE_WRITE. The warning is correct, because the test cannot locate the necessary header. The reason is that the in-tree installed headers (usr/include) have a "linux" instead of a "sys" subdirectory. Including "linux/mman.h" instead of "sys/mman.h" doesn't work (e.g., mmap() and madvise() are not defined that way). The only thing that seems to work is including "linux/mman.h" in addition to "sys/mman.h". We can get rid of our availability check and simplify. Link: https://lkml.kernel.org/r/20211015165758.41374-1-david@redhat.comSigned-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Lin Feng authored
fragmentation_index may return -1000 and the corresponding formated value showed by seq_printf will take a negative signatrue, but other positive formated values don't take a positive signatrue, so the output becomes unaligned. before: Node 0, zone DMA -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone DMA32 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone Normal -1.000 -1.000 -1.000 -1.000 0.931 0.966 0.983 0.992 0.996 0.998 0.999 after this patch: Node 0, zone DMA -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone DMA32 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 -1.000 Node 0, zone Normal -1.000 -1.000 -1.000 -1.000 0.931 0.966 0.983 0.992 0.996 0.998 0.999 Link: https://lkml.kernel.org/r/20211019103241.134797-1-linf@wangsu.comSigned-off-by:
Lin Feng <linf@wangsu.com> Signed-off-by:
-
Liu Shixin authored
KCSAN reports a data-race on v5.10 which also exists on mainline: BUG: KCSAN: data-race in extfrag_for_order+0x33/0x2d0 race at unknown origin, with read to 0xffff9ee9bfffab48 of 8 bytes by task 34 on cpu 1: extfrag_for_order+0x33/0x2d0 kcompactd+0x5f0/0xce0 kthread+0x1f9/0x220 ret_from_fork+0x22/0x30 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 34 Comm: kcompactd0 Not tainted 5.10.0+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Access to zone->free_area[order].nr_free in extfrag_for_order() and frag_show_print() is lockless. That's intentional and the stats are a rough estimate anyway. Annotate them with data_race(). [liushixin2@huawei.com: add comments] Link: https://lkml.kernel.org/r/20210918084655.2696522-1-liushixin2@huawei.com Link: https://lkml.kernel.org/r/20210908015606.3999871-1-liushixin2@huawei.comSigned-off-by:
Liu Shixin <liushixin2@huawei.com> Cc: "Paul E . McKenney" <paulmck@kernel.org> Signed-off-by:
-
Pedro Demarchi Gomes authored
Add test case of KSM merging time using mostly huge pages Link: https://lkml.kernel.org/r/20211013044045.360251-1-pedrodemargomes@gmail.comSigned-off-by:
Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Platforms can have non-contiguous NUMA nodes like below #numactl -H available: 2 nodes (0,8) ..... node distances: node 0 8 0: 10 40 8: 40 10 #numactl -H available: 1 nodes (1) .... node distances: node 1 1: 10 Hence update the test to not assume the presence of Node 0 and 1 and also use numa_num_configured_nodes() instead of numa_max_node for finding whether to skip the test. Link: https://lkml.kernel.org/r/20210914141414.350759-1-aneesh.kumar@linux.ibm.com Fixes: 82e717ad ("selftests: vm: add KSM merging across nodes test") Signed-off-by:Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by:
Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Kefeng Wang authored
When nommu, the arch_get_unmapped_area() will not be called, just kill it. Link: https://lkml.kernel.org/r/20210910061906.36299-1-wangkefeng.wang@huawei.comSigned-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Lin Feng authored
In fact, formated values returned by get_init_ra_size are not that intuitive. This patch make the comments reflect its truth. Link: https://lkml.kernel.org/r/20211019104812.135602-1-linf@wangsu.comSigned-off-by:
-
Rongwei Wang authored
When truncating pagecache on file THP, the private pages of a process should not be unmapped mapping. This incorrect behavior on a dynamic shared libraries which will cause related processes to happen core dump. A simple test for a DSO (Prerequisite is the DSO mapped in file THP): int main(int argc, char *argv[]) { int fd; fd = open(argv[1], O_WRONLY); if (fd < 0) { perror("open"); } close(fd); return 0; } The test only to open a target DSO, and do nothing. But this operation will lead one or more process to happen core dump. This patch mainly to fix this bug. Link: https://lkml.kernel.org/r/20211025092134.18562-3-rongwei.wang@linux.alibaba.com Fixes: eb6ecbed ("mm, thp: relax the VM_DENYWRITE constraint on file-backed THPs") Signed-off-by:Rongwei Wang <rongwei.wang@linux.alibaba.com> Tested-by:
Xu Yu <xuyu@linux.alibaba.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Song Liu <song@kernel.org> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Collin Fijalkovich <cfijalkovich@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Rongwei Wang authored
Patch series "fix two bugs for file THP". This patch (of 2): Transparent huge page has supported read-only non-shmem files. The file- backed THP is collapsed by khugepaged and truncated when written (for shared libraries). However, there is a race when multiple writers truncate the same page cache concurrently. In that case, subpage(s) of file THP can be revealed by find_get_entry in truncate_inode_pages_range, which will trigger PageTail BUG_ON in truncate_inode_page, as follows: page:000000009e420ff2 refcount:1 mapcount:0 mapping:0000000000000000 index:0x7ff pfn:0x50c3ff head:0000000075ff816d order:9 compound_mapcount:0 compound_pincount:0 flags: 0x37fffe0000010815(locked|uptodate|lru|arch_1|head) raw: 37fffe0000000000 fffffe0013108001 dead000000000122 dead000000000400 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 head: 37fffe0000010815 fffffe001066bd48 ffff000404183c20 0000000000000000 head: 0000000000000600 0000000000000000 00000001ffffffff ffff000c0345a000 page dumped because: VM_BUG_ON_PAGE(PageTail(page)) ------------[ cut here ]------------ kernel BUG at mm/truncate.c:213! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: xfs(E) libcrc32c(E) rfkill(E) ... CPU: 14 PID: 11394 Comm: check_madvise_d Kdump: ... Hardware name: ECS, BIOS 0.0.0 02/06/2015 pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) Call trace: truncate_inode_page+0x64/0x70 truncate_inode_pages_range+0x550/0x7e4 truncate_pagecache+0x58/0x80 do_dentry_open+0x1e4/0x3c0 vfs_open+0x38/0x44 do_open+0x1f0/0x310 path_openat+0x114/0x1dc do_filp_open+0x84/0x134 do_sys_openat2+0xbc/0x164 __arm64_sys_openat+0x74/0xc0 el0_svc_common.constprop.0+0x88/0x220 do_el0_svc+0x30/0xa0 el0_svc+0x20/0x30 el0_sync_handler+0x1a4/0x1b0 el0_sync+0x180/0x1c0 Code: aa0103e0 900061e1 910ec021 9400d300 (d4210000) This patch mainly to lock filemap when one enter truncate_pagecache(), avoiding truncating the same page cache concurrently. Link: https://lkml.kernel.org/r/20211025092134.18562-1-rongwei.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/20211025092134.18562-2-rongwei.wang@linux.alibaba.com Fixes: eb6ecbed ("mm, thp: relax the VM_DENYWRITE constraint on file-backed THPs") Signed-off-by:Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by:
Song Liu <song@kernel.org> Cc: Collin Fijalkovich <cfijalkovich@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Yang Shi <shy828301@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
George G. Davis authored
When executing transhuge-stress with an argument to specify the virtual memory size for testing, the ram size is reported as 0, e.g. transhuge-stress 384 thp-mmap: allocate 192 transhuge pages, using 384 MiB virtual memory and 0 MiB of ram thp-mmap: 0.184 s/loop, 0.957 ms/page, 2090.265 MiB/s 192 succeed, 0 failed This appears to be due to a thinko in commit 0085d61f ("selftests/vm/transhuge-stress: stress test for memory compaction"), where, at a guess, the intent was to base "xyz MiB of ram" on `ram` size. Here are results after using `ram` size: thp-mmap: allocate 192 transhuge pages, using 384 MiB virtual memory and 14 MiB of ram Link: https://lkml.kernel.org/r/20210825135843.29052-1-george_davis@mentor.com Fixes: 0085d61f ("selftests/vm/transhuge-stress: stress test for memory compaction") Signed-off-by:
George G. Davis <davis.george@siemens.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Eugeniu Rosca <erosca@de.adit-jv.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Yang Shi authored
The memory demotion needs to call migrate_pages() to do the jobs. And it is controlled by a knob, however, the knob doesn't depend on CONFIG_MIGRATION. The knob could be truned on even though MIGRATION is disabled, this will not cause any crash since migrate_pages() would just return -ENOSYS. But it is definitely not optimal to go through demotion path then retry regular swap every time. And it doesn't make too much sense to have the knob visible to the users when !MIGRATION. Move the related code from mempolicy.[h|c] to migrate.[h|c]. Link: https://lkml.kernel.org/r/20211015005559.246709-1-shy828301@gmail.comSigned-off-by:
Yang Shi <shy828301@gmail.com> Acked-by:
"Huang, Ying" <ying.huang@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
John Hubbard authored
In order to remove the need to manually keep three different files in synch, provide a common definition of the mapping between enum migrate_reason, and the associated strings for each enum item. 1. Use the tracing system's mapping of enums to strings, by redefining and reusing the MIGRATE_REASON and supporting macros, and using that to populate the string array in mm/debug.c. 2. Move enum migrate_reason to migrate_mode.h. This is not strictly necessary for this patch, but migrate mode and migrate reason go together, so this will slightly clarify things. Link: https://lkml.kernel.org/r/20210922041755.141817-2-jhubbard@nvidia.comSigned-off-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Weizhao Ouyang <o451686892@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Signed-off-by:
-
Zhenguo Yao authored
We can specify the number of hugepages to allocate at boot. But the hugepages is balanced in all nodes at present. In some scenarios, we only need hugepages in one node. For example: DPDK needs hugepages which are in the same node as NIC. If DPDK needs four hugepages of 1G size in node1 and system has 16 numa nodes we must reserve 64 hugepages on the kernel cmdline. But only four hugepages are used. The others should be free after boot. If the system memory is low(for example: 64G), it will be an impossible task. So extend the hugepages parameter to support specifying hugepages on a specific node. For example add following parameter: hugepagesz=1G hugepages=0:1,1:3 It will allocate 1 hugepage in node0 and 3 hugepages in node1. Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.comSigned-off-by:
Zhenguo Yao <yaozhenguo1@gmail.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Zhenguo Yao <yaozhenguo1@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mike Rapoport <rppt@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Sultan Alsawaf authored
The OOM reaper alters user address space which might theoretically alter the snapshot if reaping is allowed to happen after the freezer quiescent state. To this end, the reaper kthread uses wait_event_freezable() while waiting for any work so that it cannot run while the system freezes. However, the current implementation doesn't respect the freezer because all kernel threads are created with the PF_NOFREEZE flag, so they are automatically excluded from freezing operations. This means that the OOM reaper can race with system snapshotting if it has work to do while the system is being frozen. Fix this by adding a set_freezable() call which will clear the PF_NOFREEZE flag and thus make the OOM reaper visible to the freezer. Please note that the OOM reaper altering the snapshot this way is mostly a theoretical concern and has not been observed in practice. Link: https://lkml.kernel.org/r/20210921165758.6154-1-sultan@kerneltoast.com Link: https://lkml.kernel.org/r/20210918233920.9174-1-sultan@kerneltoast.com Fixes: aac45363 ("mm, oom: introduce oom reaper") Signed-off-by:
Sultan Alsawaf <sultan@kerneltoast.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Mike Rapoport authored
Rename memblock_free_ptr() to memblock_free() and use memblock_free() when freeing a virtual pointer so that memblock_free() will be a counterpart of memblock_alloc() The callers are updated with the below semantic patch and manual addition of (void *) casting to pointers that are represented by unsigned long variables. @@ identifier vaddr; expression size; @@ ( - memblock_phys_free(__pa(vaddr), size); + memblock_free(vaddr, size); | - memblock_free_ptr(vaddr, size); + memblock_free(vaddr, size); ) [sfr@canb.auug.org.au: fixup] Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.orgSigned-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Juergen Gross <jgross@suse.com> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by:
-
Mike Rapoport authored
Since memblock_free() operates on a physical range, make its name reflect it and rename it to memblock_phys_free(), so it will be a logical counterpart to memblock_phys_alloc(). The callers are updated with the below semantic patch: @@ expression addr; expression size; @@ - memblock_free(addr, size); + memblock_phys_free(addr, size); Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.orgSigned-off-by: -
Mike Rapoport authored
memblock_free_late() is a NOP wrapper for __memblock_free_late(), there is no point to keep this indirection. Drop the wrapper and rename __memblock_free_late() to memblock_free_late(). Link: https://lkml.kernel.org/r/20210930185031.18648-5-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
memblock_free_early_nid() is unused and memblock_free_early() is an alias for memblock_free(). Replace calls to memblock_free_early() with calls to memblock_free() and remove memblock_free_early() and memblock_free_early_nid(). Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.orgSigned-off-by:
-
Mike Rapoport authored
free_p2m_page() wrongly passes a virtual pointer to memblock_free() that treats it as a physical address. Call memblock_free_ptr() instead that gets a virtual address to free the memory. Link: https://lkml.kernel.org/r/20210930185031.18648-3-rppt@kernel.orgSigned-off-by:
Juergen Gross <jgross@suse.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com> Signed-off-by:
-
Mike Rapoport authored
Patch series "memblock: cleanup memblock_free interface", v2. This is the fix for memblock freeing APIs mismatch [1]. The first patch is a cleanup of numa_distance allocation in arch_numa I've spotted during the conversion. The second patch is a fix for Xen memory freeing on some of the error paths. [1] https://lore.kernel.org/all/CAHk-=wj9k4LZTz+svCxLYs5Y1=+yKrbAUArH1+ghyG3OLd8VVg@mail.gmail.com This patch (of 6): Memory allocation of numa_distance uses memblock_phys_alloc_range() without actual range limits, converts the returned physical address to virtual and then only uses the virtual address for further initialization. Simplify this by replacing memblock_phys_alloc_range() with memblock_alloc(). Link: https://lkml.kernel.org/r/20210930185031.18648-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20210930185031.18648-2-rppt@kernel.orgSigned-off-by:
-
Naoya Horiguchi authored
In page list mode (with -l and -L option), virtual address and physical address are printed in hexadecimal, but file offset is not, which is confusing, so let's align it. Link: https://lkml.kernel.org/r/20211004061325.1525902-4-naoya.horiguchi@linux.devSigned-off-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Bin Wang <wangbin224@huawei.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Christian Hansen <chansen3@cisco.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by:
-
Naoya Horiguchi authored
Currently file info from show_file() is printed out within page list like below, but this is inconvenient a little to utilize the page list from other scripts (maybe needs additional filtering). $ ./page-types -f page-types.c -l foffset offset len flags page-types.c Inode: 15108680 Size: 30953 (8 pages) Modify: Sat Oct 2 23:11:20 2021 (2399 seconds ago) Access: Sat Oct 2 23:11:28 2021 (2391 seconds ago) 0 d9f59e 1 ___U_lA____________________________________ 1 1031eb5 1 __RU_l_____________________________________ 2 13bf717 1 __RU_l_____________________________________ 3 13ac333 1 ___U_lA____________________________________ 4 d9f59f 1 __RU_l_____________________________________ 5 183fd49 1 ___U_lA____________________________________ 6 13cbf69 1 ___U_lA____________________________________ 7 d9ef05 1 ___U_lA____________________________________ flags page-count MB symbolic-flags long-symbolic-flags 0x000000000000002c 3 0 __RU_l_____________________________________ referenced,uptodate,lru 0x0000000000000068 5 0 ___U_lA____________________________________ uptodate,lru,active total 8 0 With this patch file info is printed out in summary part like below: $ ./page-types -f page-types.c -l foffset offset len flags 0 d9f59e 1 ___U_lA_____________________________________ 1 1031eb5 1 __RU_l______________________________________ 2 13bf717 1 __RU_l______________________________________ 3 13ac333 1 ___U_lA_____________________________________ 4 d9f59f 1 __RU_l______________________________________ 5 183fd49 1 ___U_lA_____________________________________ 6 13cbf69 1 ___U_lA_____________________________________ page-types.c Inode: 15108680 Size: 30953 (8 pages) Modify: Sat Oct 2 23:11:20 2021 (2435 seconds ago) Access: Sat Oct 2 23:11:28 2021 (2427 seconds ago) flags page-count MB symbolic-flags long-symbolic-flags 0x000000000000002c 3 0 __RU_l______________________________________ referenced,uptodate,lru 0x0000000000000068 4 0 ___U_lA_____________________________________ uptodate,lru,active total 7 0 Link: https://lkml.kernel.org/r/20211004061325.1525902-3-naoya.horiguchi@linux.devSigned-off-by: -
Naoya Horiguchi authored
Patch series "tools/vm/page-types.c: a few improvements". This patchset adds some improvements on tools/vm/page-types.c. Patch 1/3 makes -a option (specify address range) work with -f (file cache mode). Patch 2/3 and 3/3 are to fix minor formatting issues of this tool. These would make life a little easier for the users of this tool. Please see individual patches for more details about specific issues. This patch (of 3): -a|--addr option is used to limit the range of address to be scanned for page status. It works now for physical address space (dafult mode) or for virtual address space (with -p option), but not for file address space (with -f option). So make walk_file() aware of -a option. Link: https://lkml.kernel.org/r/20211004061325.1525902-1-naoya.horiguchi@linux.dev Link: https://lkml.kernel.org/r/20211004061325.1525902-2-naoya.horiguchi@linux.devSigned-off-by:
-
Zhenliang Wei authored
When viewing page owner information, we may be more concerned about the total memory rather than the times of stack appears. Therefore, the following adjustments are made: 1. Added the statistics on the total number of pages. 2. Added the optional parameter "-m" to configure the program to sort by memory (total pages). The general output of page_owner is as follows: Page allocated via order XXX, ... PFN XXX ... // Detailed stack Page allocated via order XXX, ... PFN XXX ... // Detailed stack The original page_owner_sort ignores PFN rows, puts the remaining rows in buf, counts the times of buf, and finally sorts them according to the times. General output: XXX times: Page allocated via order XXX, ... // Detailed stack Now, we use regexp to extract the page order value from the buf, and count the total pages for the buf. General output: XXX times, XXX pages: Page allocated via order XXX, ... // Detailed stack By default, it is still sorted by the times of buf; If you want to sort by the pages nums of buf, use the new -m parameter. Link: https://lkml.kernel.org/r/1631678242-41033-1-git-send-email-weizhenliang@huawei.comSigned-off-by:
Zhenliang Wei <weizhenliang@huawei.com> Cc: Tang Bin <tangbin@cmss.chinamobile.com> Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: Zhenliang Wei <weizhenliang@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by:
-
Yuanzheng Song authored
When reading memcg->socket_pressure in mem_cgroup_under_socket_pressure() and writing memcg->socket_pressure in vmpressure() at the same time, the following data-race occurs: BUG: KCSAN: data-race in __sk_mem_reduce_allocated / vmpressure write to 0xffff8881286f4938 of 8 bytes by task 24550 on cpu 3: vmpressure+0x218/0x230 mm/vmpressure.c:307 shrink_node_memcgs+0x2b9/0x410 mm/vmscan.c:2658 shrink_node+0x9d2/0x11d0 mm/vmscan.c:2769 shrink_zones+0x29f/0x470 mm/vmscan.c:2972 do_try_to_free_pages+0x193/0x6e0 mm/vmscan.c:3027 try_to_free_mem_cgroup_pages+0x1c0/0x3f0 mm/vmscan.c:3345 reclaim_high mm/memcontrol.c:2440 [inline] mem_cgroup_handle_over_high+0x18b/0x4d0 mm/memcontrol.c:2624 tracehook_notify_resume include/linux/tracehook.h:197 [inline] exit_to_user_mode_loop kernel/entry/common.c:164 [inline] exit_to_user_mode_prepare+0x110/0x170 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x16/0x30 kernel/entry/common.c:266 ret_from_fork+0x15/0x30 arch/x86/entry/entry_64.S:289 read to 0xffff8881286f4938 of 8 bytes by interrupt on cpu 1: mem_cgroup_under_socket_pressure include/linux/memcontrol.h:1483 [inline] sk_under_memory_pressure include/net/sock.h:1314 [inline] __sk_mem_reduce_allocated+0x1d2/0x270 net/core/sock.c:2696 __sk_mem_reclaim+0x44/0x50 net/core/sock.c:2711 sk_mem_reclaim include/net/sock.h:1490 [inline] ...... net_rx_action+0x17a/0x480 net/core/dev.c:6864 __do_softirq+0x12c/0x2af kernel/softirq.c:298 run_ksoftirqd+0x13/0x20 kernel/softirq.c:653 smpboot_thread_fn+0x33f/0x510 kernel/smpboot.c:165 kthread+0x1fc/0x220 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296 Fix it by using READ_ONCE() and WRITE_ONCE() to read and write memcg->socket_pressure. Link: https://lkml.kernel.org/r/20211025082843.671690-1-songyuanzheng@huawei.comSigned-off-by:
Yuanzheng Song <songyuanzheng@huawei.com> Reviewed-by:
-
Mel Gorman authored
Tracing indicates that tasks throttled on NOPROGRESS are woken prematurely resulting in occasional massive spikes in direct reclaim activity. This patch wakes tasks throttled on NOPROGRESS if reclaim efficiency is at least 12%. Link: https://lkml.kernel.org/r/20211022144651.19914-9-mgorman@techsingularity.netSigned-off-by:
Mel Gorman <mgorman@techsingularity.net> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Darrick J . Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: NeilBrown <neilb@suse.de> Cc: Rik van Riel <riel@surriel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Mel Gorman authored
Tracing of the stutterp workload showed the following delays 1 usect_delayed=124000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usect_delayed=128000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usect_delayed=176000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usect_delayed=536000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usect_delayed=544000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usect_delayed=556000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usect_delayed=624000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usect_delayed=716000 reason=VMSCAN_THROTTLE_NOPROGRESS 1 usect_delayed=772000 reason=VMSCAN_THROTTLE_NOPROGRESS 2 usect_delayed=512000 reason=VMSCAN_THROTTLE_NOPROGRESS 16 usect_delayed=120000 reason=VMSCAN_THROTTLE_NOPROGRESS 53 usect_delayed=116000 reason=VMSCAN_THROTTLE_NOPROGRESS 116 usect_delayed=112000 reason=VMSCAN_THROTTLE_NOPROGRESS 5907 usect_delayed=108000 reason=VMSCAN_THROTTLE_NOPROGRESS 71741 usect_delayed=104000 reason=VMSCAN_THROTTLE_NOPROGRESS All the throttling hit the full timeout and then there was wakeup delays meaning that the wakeups are premature as no other reclaimer such as kswapd has made progress. This patch increases the maximum timeout. Link: https://lkml.kernel.org/r/20211022144651.19914-8-mgorman@techsingularity.netSigned-off-by: -
Mel Gorman authored
Neil Brown raised concerns about callers of reclaim_throttle specifying a timeout value. The original timeout values to congestion_wait() were probably pulled out of thin air or copy&pasted from somewhere else. This patch centralises the timeout values and selects a timeout based on the reason for reclaim throttling. These figures are also pulled out of the same thin air but better values may be derived Running a workload that is throttling for inappropriate periods and tracing mm_vmscan_throttled can be used to pick a more appropriate value. Excessive throttling would pick a lower timeout where as excessive CPU usage in reclaim context would select a larger timeout. Ideally a large value would always be used and the wakeups would occur before a timeout but that requires careful testing. Link: https://lkml.kernel.org/r/20211022144651.19914-7-mgorman@techsingularity.netSigned-off-by:
-
Mel Gorman authored
The page allocator stalls based on the number of pages that are waiting for writeback to start but this should now be redundant. shrink_inactive_list() will wake flusher threads if the LRU tail are unqueued dirty pages so the flusher should be active. If it fails to make progress due to pages under writeback not being completed quickly then it should stall on VMSCAN_THROTTLE_WRITEBACK. Link: https://lkml.kernel.org/r/20211022144651.19914-6-mgorman@techsingularity.netSigned-off-by:
-
Mel Gorman authored
do_writepages throttles on congestion if the writepages() fails due to a lack of memory but congestion_wait() is partially broken as the congestion state is not updated for all BDIs. This patch stalls waiting for a number of pages to complete writeback that located on the local node. The main weakness is that there is no correlation between the location of the inode's pages and locality but that is still better than congestion_wait. Link: https://lkml.kernel.org/r/20211022144651.19914-5-mgorman@techsingularity.netSigned-off-by:
-
