- 04 Sep, 2024 14 commits
-
-
Jason Xing authored
Add the SO_PEEK_OFF selftest for UDP. In this patch, I mainly do three things: 1. rename tcp_so_peek_off.c 2. adjust for UDP protocol 3. add selftests into it Suggested-by:
Jon Maloy <jmaloy@redhat.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Jason Xing <kernelxing@tencent.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Machon says: ==================== net: microchip: add FDMA library and use it for Sparx5 This patch series is the first of a 2-part series, that adds a new common FDMA library for Microchip switch chips Sparx5 and lan966x. These chips share the same FDMA engine, and as such will benefit from a common library with a common implementation. This also has the benefit of removing a lot open-coded bookkeeping and duplicate code for the two drivers. Additionally, upstreaming efforts for a third chip, lan969x, will begin in the near future. This chip will use the new library too. In this first series, the FDMA library is introduced and used by the Sparx5 switch driver. ################### # Example of use: # ################### - Initialize the rx and tx fdma structs with values for: number of DCB's, number of DB's, channel ID, DB size (data buffer size), and total size of the requested memory. Also provide two callbacks: nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr. - Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent(). - Initialize the DCB's with fdma_dcb_init(). - Add new DCB's with fdma_dcb_add(). - Free memory with fdma_free_phys() or fdma_free_coherent(). ##################### # Patch breakdown: # ##################### Patch #1: introduces library and selects it for Sparx5. Patch #2: includes the fdma_api.h header and removes old symbols. Patch #3: replaces old rx and tx variables with equivalent ones from the fdma struct. Only the variables that can be changed without breaking traffic is changed in this patch. Patch #4: uses the library for allocation of rx buffers. This requires quite a bit of refactoring in this single patch. Patch #5: uses the library for adding DCB's in the rx path. Patch #6: uses the library for freeing rx buffers. Patch #7: uses the library helpers in the rx path. Patch #8: uses the library for allocation of tx buffers. This requires quite a bit of refactoring in this single patch. Patch #9: uses the library for adding DCB's in the tx path. Patch #10: uses the library helpers in the tx path. Patch #11: ditches the existing linked list for storing buffer addresses, and instead uses offsets into contiguous memory. Patch #12: modifies existing rx and tx functions to be direction independent. ==================== Signed-off-by: -
Daniel Machon authored
These direction specific functions can be ditched in favor of a single function: sparx5_fdma_reload(), which retrieves the channel id from the fdma struct instead. Signed-off-by:
Daniel Machon <daniel.machon@microchip.com> Reviewed-by:
Steen Hegelund <Steen.Hegelund@microchip.com> Reviewed-by:
Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com> Reviewed-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Daniel Machon authored
Currently, the driver uses a linked list for storing the tx buffer addresses. This requires a good amount of extra bookkeeping code. Ditch the linked list in favor of tx buffers being in the same contiguous memory space as the DCB's and the DB's. The FDMA library has a helper for this - so use that. The tx buffer addresses are now retrieved as an offset into the FDMA memory space. Signed-off-by:
-
Daniel Machon authored
The library has the helper fdma_free_phys() for freeing physical FDMA memory. Use it in the exit path. Signed-off-by:
-
Daniel Machon authored
Use the fdma_dcb_add() function to add DCB's in the tx path. This gets rid of the open-coding of nextptr and dataptr handling and leaves it to the library. Also, make sure the fdma indexes are advanced using: fdma_dcb_advance(), so that the correct nextptr and dataptr offsets are retrieved. Signed-off-by:
-
Daniel Machon authored
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for tx buffer allocation and use the new buffers throughout. In order to replace the old buffers with the new ones, we have to do the following refactoring: - use fdma_alloc_phys() and fdma_dcb_init() - replace the variables: tx->dma, tx->first_entry and tx->curr_entry with the equivalents from the FDMA struct. - replace uses of sparx5_db_hw and sparx5_tx_dcb_hw with fdma_db and fdma_dcb. - add sparx5_fdma_tx_dataptr_cb callback for obtaining the dataptr. - Initialize FDMA struct values. Signed-off-by: -
Daniel Machon authored
The library provides helpers for a number of DCB and DB operations. Use these in the rx path. Signed-off-by:
-
Daniel Machon authored
The library has the helper fdma_free_phys() for freeing physical FDMA memory. Use it in the exit path. Signed-off-by:
-
Daniel Machon authored
Use the fdma_dcb_add() function to add DCB's in the rx path. This gets rid of the open-coding of nextptr and dataptr handling and leaves it to the library. Signed-off-by:
-
Daniel Machon authored
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx buffer allocation and use the new buffers throughout. In order to replace the old buffers with the new ones, we have to do the following refactoring: - use fdma_alloc_phys() and fdma_dcb_init() - replace the variables: rx->dma, rx->dcb_entries and rx->last_entry with the equivalents from the FDMA struct. - replace uses of sparx5_db_hw and sparx5_rx_dcb_hw with fdma_db and fdma_dcb. - add sparx5_fdma_rx_dataptr_cb callback for obtaining the dataptr. - Initialize FDMA struct values. Signed-off-by: -
Daniel Machon authored
Replace the old rx and tx variables: channel_id, FDMA_DCB_MAX, FDMA_RX_DCB_MAX_DBS, FDMA_TX_DCB_MAX_DBS, dcb_index and db_index with the equivalents from the FDMA rx and tx structs. These variables are not entangled in any buffer allocation and can therefore be replaced in advance. Signed-off-by:
-
Daniel Machon authored
Include and use the new FDMA header, which now provides the required masks and bit offsets for operating on the DCB's and DB's. Signed-off-by:
-
Daniel Machon authored
Add new FDMA library for interacting with the FDMA engine on Microchip Sparx5 and lan966x switch chips, in an effort to reduce duplicate code and provide a common set of symbols and functions. Signed-off-by:
-
- 03 Sep, 2024 26 commits
-
-
Yue Haibing authored
Commit 6b7c5b94 ("net: Add be2net driver.") declared be_pci_fnum_get() and be_cmd_reset() but never implemented. And commit 9fa465c0 ("be2net: remove code duplication relating to Lancer reset sequence") removed lancer_test_and_set_rdy_state() but leave declaration. Commit 76a9e08e ("be2net: cleanup wake-on-lan code") left behind be_is_wol_supported() declaration. Commit baaa08d1 ("be2net: do not call be_set/get_fw_log_level() on Skyhawk-R") removed be_get_fw_log_level() but leave declaration. Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240902113238.557515-1-yuehaibing@huawei.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Yue Haibing authored
There is no caller and implementation in tree. Signed-off-by:
-
Krzysztof Kozlowski authored
This reverts commit bf4d87f8 because it introduced dev_err_probe() in non-probe path, which is not desired. In general, calling dev_err_probe() after successful probe in case of handling -EPROBE_DEFER error, will set deferred status on the device already probed. This is however not a problem here now, because dev_err_probe() in affected places is used for handling errors from request_firmware(), which does not return -EPROBE_DEFER. Still usage of dev_err_probe() in such case is not correct, because request_firmware() could once return -EPROBE_DEFER. Fixes: bf4d87f8 ("net: alacritech: Switch to use dev_err_probe()") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Florian Westphal authored
This update allows listing default firewalld ruleset on Fedora 40 via tools/net/ynl/cli.py --spec \ Documentation/netlink/specs/nftables.yaml --dump getrule Default ruleset uses fib, reject and objref expressions which were missing. Other missing expressions can be added later. Improve decoding while at it: - add bitwise, ct and lookup attributes - wire up the quota expression - translate raw verdict codes to a human reable name, e.g. 'code': 4294967293 becomes 'code': 'jump'. v2: forgot fib addrtype in enum list (Donald Hunter) Reviewed-by:Donald Hunter <donald.hunter@gmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20240902214112.2549-1-fw@strlen.deSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: MIB counters for MPJ TX + misc improvements Recently, a few issues have been discovered around the creation of additional subflows. Without these counters, it was difficult to point out the reason why some subflows were not created as expected. In patch 3, all error paths from __mptcp_subflow_connect() are covered, except the one related to the 'fully established mode', because it can only happen with the userspace PM, which will propagate the error to the userspace in this case (ENOTCONN). These new counters are also verified in the MPTCP Join selftest in patch 6. While at it, a few other patches are improving the MPTCP path-manager code ... - Patch 1: 'flush' related helpers are renamed to avoid confusions - Patch 2: directly pass known ID and flags to create a new subflow, i/o getting them later by iterating over all endpoints again ... and the MPJoin selftests: - Patch 4: reduce the number of positional parameters - Patch 5: only one line for the 'join' checks, instead of 3 - Patch 7: more explicit check names, instead of sometimes too cryptic ones: rtx, ptx, ftx, ctx, fclzrx, sum - Patch 8: specify client/server instead of 'invert' for some checks not suggesting one specific direction - Patch 9: mute errors of mptcp_connect when ran in the background - Patch 10: simplify checksum_tests by using a for-loop - Patch 11: remove 'define' re-definitions ==================== Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-0-d3e0f3773b90@kernel.orgSigned-off-by: -
Matthieu Baerts (NGI0) authored
'MPTCP_PM_NAME' is defined in 'linux/mptcp_pm.h', included in 'linux/mptcp.h', no need to re-define it. 'MPTCP_PM_EVENTS' is not defined in 'linux/mptcp.h', but 'MPTCP_PM_EV_GRP_NAME' is, with the same value. We can then use the latter, and drop the other one. Reviewed-by:
Geliang Tang <geliang@kernel.org> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-11-d3e0f3773b90@kernel.orgSigned-off-by:
-
Geliang Tang authored
The four checksum tests are similar, only one line is different. So a for-loop can be used to simplify these tests. Signed-off-by:
Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The test is supposed to be killed before the end, which will likely cause "Connection reset by peer" errors. It is confusing, especially because in case of real transfer errors, the test will not be marked as failed. But that's OK, there are many other tests checking that. Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Instead of displaying 'invert' when looking at some events like MP_FAIL, MP_FASTCLOSE, MP_RESET, RM_ADDR, which is a bit vague because they are not traditionnaly sent from one side, the host being checked is now printed. For the ADD_ADDR, only display the host when it is the client sending it, which is more unusual. Also before, the 'invert' message was printed after a few checks, but it was not clear which ones exactly. Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Before, the check names had to be very short. It is no longer the case now that these checks are printed on a dedicated line. Then, it looks better to have more explicit names. Reviewed-by:
-
Matthieu Baerts (NGI0) authored
A few new MPJoinSynTx MIB counters have been added in a previous commit. They are being validated here in mptcp_join.sh selftest, each time the number of received MPJ are checked. Most of the time, the number of sent SYN+MPJ is the same as the received ones. But sometimes, there are more, because there are dropped, or there are errors. While at it, the "no MPC reuse with single endpoint" subtest has been modified to force a bind() error. Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Most tests are checking if the expected number of SYN/SYN+ACK/ACK JOINs have been received, each of them on one line. More Join related tests are going to be checked soon, no need to add 5 new lines per test in case of success, just one is enough. In case of issue, the errors will still be reported like before. Reviewed-by:
-
Matthieu Baerts (NGI0) authored
chk_join_nr() currently takes 9 positional parameters, 6 of them are optional. It makes it hard to read: chk_join_nr 1 1 1 1 0 1 1 0 4 Naming these vars helps to make it easier to read: join_csum_ns1=1 join_csum_ns2=0 \ join_fail_nr=1 join_rst_nr=1 join_infi_nr=0 \ join_corrupted_pkts=4 \ chk_join_nr 1 1 1 It will then be easier to add new optional parameters. Reviewed-by: -
Matthieu Baerts (NGI0) authored
Recently, a few issues have been discovered around the creation of additional subflows. Without these counters, it was difficult to point out the reason why some subflows were not created as expected. These counters should have been added earlier, because there is no other simple ways to extract such information from the kernel, and understand why subflows have not been created. While at it, some pr_debug() have been added, just in case the errno needs to be printed. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/509Reviewed-by:
-
Matthieu Baerts (NGI0) authored
__mptcp_subflow_connect() is currently called from the path-managers, which have all the required information to create subflows. No need to call the PM again to re-iterate over the list of entries with RCU lock to get more info. Instead, it is possible to pass a mptcp_pm_addr_entry structure, instead of a mptcp_addr_info one. The former contains the ifindex and the flags that are required when creating the new subflow. This is a partial revert of commit ee285257 ("mptcp: drop flags and ifindex arguments"). While at it, the local ID can also be set if it is known and 0, to avoid having to set it in the 'rebuild_header' hook, which will cause a new iteration of the endpoint entries. Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
Rename all the helpers specific to the flushing operations to make it clear that the intention is to flush all created subflows, and remove all announced addresses, not just a specific selection. That way, it is easier to understand why the id_avail_bitmap and local_addr_used are reset at the end. Reviewed-by:
-
Jakub Kicinski authored
Gal Pressman says: ==================== RX software timestamp for all All devices support SOF_TIMESTAMPING_RX_SOFTWARE by virtue of net_timestamp_check() being called in the device independent code. Following Willem's suggestion [1], make it so drivers do not have to handle SOF_TIMESTAMPING_RX_SOFTWARE and SOF_TIMESTAMPING_SOFTWARE, nor setting of the PHC index to -1. All drivers will now report RX software timestamp as supported. The series is limited to 15 patches, I will submit other drivers in subsequent submissions. [1] https://lore.kernel.org/netdev/661550e348224_23a2b2294f7@willemb.c.googlers.com.notmuch/ v1: https://lore.kernel.org/20240829144253.122215-1-gal@nvidia.com ==================== Link: https://patch.msgid.link/20240901112803.212753-1-gal@nvidia.comSigned-off-by:
-
Gal Pressman authored
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by:
Carolina Jubran <cjubran@nvidia.com> Reviewed-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
Marcin Wojtas <marcin.s.wojtas@gmail.com> Link: https://patch.msgid.link/20240901112803.212753-16-gal@nvidia.comSigned-off-by:
-
Gal Pressman authored
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by:
Subbaraya Sundeep <sbhatta@marvell.com> Link: https://patch.msgid.link/20240901112803.212753-15-gal@nvidia.comSigned-off-by:
-
Gal Pressman authored
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by:
-
Gal Pressman authored
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by:
Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20240901112803.212753-13-gal@nvidia.comSigned-off-by:
-
Gal Pressman authored
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by:
-
Gal Pressman authored
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by:
Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20240901112803.212753-11-gal@nvidia.comSigned-off-by:
-
Gal Pressman authored
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://patch.msgid.link/20240901112803.212753-10-gal@nvidia.comSigned-off-by:
-
Gal Pressman authored
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by:
-
Gal Pressman authored
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://patch.msgid.link/20240901112803.212753-8-gal@nvidia.comSigned-off-by:
-
