Commit af99da74 ("powerpc/sstep: Support VSX vector paired storage
access instructions") added loading and storing 32 word long data into
adjacent VSRs. However the calculation used to determine if two VSRs
needed to be loaded/stored inadvertently prevented the load/storing
taking place for instructions with a data length less than 16 words.

This causes the emulation to not function correctly, which can be seen
by the alignment_handler selftest:

$ ./alignment_handler
[snip]
test: test_alignment_handler_vsx_207
tags: git_version:powerpc-5.12-1-0-g82d2c16b
VSX: 2.07B
        Doing lxsspx:   PASSED
        Doing lxsiwax:  FAILED: Wrong Data
        Doing lxsiwzx:  PASSED
        Doing stxsspx:  PASSED
        Doing stxsiwx:  PASSED
failure: test_alignment_handler_vsx_207
test: test_alignment_handler_vsx_300
tags: git_version:powerpc-5.12-1-0-g82d2c16b
VSX: 3.00B
        Doing lxsd:     PASSED
        Doing lxsibzx:  PASSED
        Doing lxsihzx:  PASSED
        Doing lxssp:    FAILED: Wrong Data
        Doing lxv:      PASSED
        Doing lxvb16x:  PASSED
        Doing lxvh8x:   PASSED
        Doing lxvx:     PASSED
        Doing lxvwsx:   FAILED: Wrong Data
        Doing lxvl:     PASSED
        Doing lxvll:    PASSED
        Doing stxsd:    PASSED
        Doing stxsibx:  PASSED
        Doing stxsihx:  PASSED
        Doing stxssp:   PASSED
        Doing stxv:     PASSED
        Doing stxvb16x: PASSED
        Doing stxvh8x:  PASSED
        Doing stxvx:    PASSED
        Doing stxvl:    PASSED
        Doing stxvll:   PASSED
failure: test_alignment_handler_vsx_300
[snip]

Fix this by making sure all VSX instruction emulation correctly
load/store from the VSRs.

Fixes: af99da74 ("powerpc/sstep: Support VSX vector paired storage access instructions")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225031946.1458206-1-jniethe5@gmail.com

Running "perf mem record" in powerpc platforms with selinux enabled
resulted in soft lockup's. Below call-trace was seen in the logs:

  CPU: 58 PID: 3751 Comm: sssd_nss Not tainted 5.11.0-rc7+ #2
  NIP:  c000000000dff3d4 LR: c000000000dff3d0 CTR: 0000000000000000
  REGS: c000007fffab7d60 TRAP: 0100   Not tainted  (5.11.0-rc7+)
  ...
  NIP _raw_spin_lock_irqsave+0x94/0x120
  LR  _raw_spin_lock_irqsave+0x90/0x120
  Call Trace:
    0xc00000000fd47260 (unreliable)
    skb_queue_tail+0x3c/0x90
    audit_log_end+0x6c/0x180
    common_lsm_audit+0xb0/0xe0
    slow_avc_audit+0xa4/0x110
    avc_has_perm+0x1c4/0x260
    selinux_perf_event_open+0x74/0xd0
    security_perf_event_open+0x68/0xc0
    record_and_restart+0x6e8/0x7f0
    perf_event_interrupt+0x22c/0x560
    performance_monitor_exception0x4c/0x60
    performance_monitor_common_virt+0x1c8/0x1d0
  interrupt: f00 at _raw_spin_lock_irqsave+0x38/0x120
  NIP:  c000000000dff378 LR: c000000000b5fbbc CTR: c0000000007d47f0
  REGS: c00000000fd47860 TRAP: 0f00   Not tainted  (5.11.0-rc7+)
  ...
  NIP _raw_spin_lock_irqsave+0x38/0x120
  LR  skb_queue_tail+0x3c/0x90
  interrupt: f00
    0x38 (unreliable)
    0xc00000000aae6200
    audit_log_end+0x6c/0x180
    audit_log_exit+0x344/0xf80
    __audit_syscall_exit+0x2c0/0x320
    do_syscall_trace_leave+0x148/0x200
    syscall_exit_prepare+0x324/0x390
    system_call_common+0xfc/0x27c

The above trace shows that while the CPU was handling a performance
monitor exception, there was a call to security_perf_event_open()
function. In powerpc core-book3s, this function is called from
perf_allow_kernel() check during recording of data address in the
sample via perf_get_data_addr().

Commit da97e184 ("perf_event: Add support for LSM and SELinux
checks") introduced security enhancements to perf. As part of this
commit, the new security hook for perf_event_open() was added in all
places where perf paranoid check was previously used. In powerpc
core-book3s code, originally had paranoid checks in
perf_get_data_addr() and power_pmu_bhrb_read(). So
perf_paranoid_kernel() checks were replaced with perf_allow_kernel()
in these PMU helper functions as well.

The intention of paranoid checks in core-book3s was to verify
privilege access before capturing some of the sample data. Along with
paranoid checks, perf_allow_kernel() also does a
security_perf_event_open(). Since these functions are accessed while
recording a sample, we end up calling selinux_perf_event_open() in PMI
context. Some of the security functions use spinlock like
sidtab_sid2str_put(). If a perf interrupt hits under a spin lock and
if we end up in calling selinux hook functions in PMI handler, this
could cause a dead lock.

Since the purpose of this security hook is to control access to
perf_event_open(), it is not right to call this in interrupt context.

The paranoid checks in powerpc core-book3s were done at interrupt time
which is also not correct.

Reference commits:
  Commit cd1231d7 ("powerpc/perf: Prevent kernel address leak via perf_get_data_addr()")
  Commit bb19af81 ("powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer")

We only allow creation of events that have already passed the
privilege checks in perf_event_open(). So these paranoid checks are
not needed at event time. As a fix, patch uses
'event->attr.exclude_kernel' check to prevent exposing kernel address
for userspace only sampling.

Fixes: cd1231d7 ("powerpc/perf: Prevent kernel address leak via perf_get_data_addr()")
Cc: stable@vger.kernel.org # v4.17+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1614247839-1428-1-git-send-email-atrajeev@linux.vnet.ibm.com

The test robot has managed to generate a random config leading
to following build failure:

  LD      .tmp_vmlinux.kallsyms1
powerpc64-linux-ld: arch/powerpc/mm/pgtable.o: in function `ptep_set_access_flags':
pgtable.c:(.text.ptep_set_access_flags+0xf0): undefined reference to `hash__flush_tlb_page'
powerpc64-linux-ld: arch/powerpc/mm/book3s32/mmu.o: in function `MMU_init_hw_patch':
mmu.c:(.init.text+0x452): undefined reference to `patch__hash_page_A0'
powerpc64-linux-ld: mmu.c:(.init.text+0x45e): undefined reference to `patch__hash_page_A0'
powerpc64-linux-ld: mmu.c:(.init.text+0x46a): undefined reference to `patch__hash_page_A1'
powerpc64-linux-ld: mmu.c:(.init.text+0x476): undefined reference to `patch__hash_page_A1'
powerpc64-linux-ld: mmu.c:(.init.text+0x482): undefined reference to `patch__hash_page_A2'
powerpc64-linux-ld: mmu.c:(.init.text+0x48e): undefined reference to `patch__hash_page_A2'
powerpc64-linux-ld: mmu.c:(.init.text+0x49e): undefined reference to `patch__hash_page_B'
powerpc64-linux-ld: mmu.c:(.init.text+0x4aa): undefined reference to `patch__hash_page_B'
powerpc64-linux-ld: mmu.c:(.init.text+0x4b6): undefined reference to `patch__hash_page_C'
powerpc64-linux-ld: mmu.c:(.init.text+0x4c2): undefined reference to `patch__hash_page_C'
powerpc64-linux-ld: mmu.c:(.init.text+0x4ce): undefined reference to `patch__flush_hash_A0'
powerpc64-linux-ld: mmu.c:(.init.text+0x4da): undefined reference to `patch__flush_hash_A0'
powerpc64-linux-ld: mmu.c:(.init.text+0x4e6): undefined reference to `patch__flush_hash_A1'
powerpc64-linux-ld: mmu.c:(.init.text+0x4f2): undefined reference to `patch__flush_hash_A1'
powerpc64-linux-ld: mmu.c:(.init.text+0x4fe): undefined reference to `patch__flush_hash_A2'
powerpc64-linux-ld: mmu.c:(.init.text+0x50a): undefined reference to `patch__flush_hash_A2'
powerpc64-linux-ld: mmu.c:(.init.text+0x522): undefined reference to `patch__flush_hash_B'
powerpc64-linux-ld: mmu.c:(.init.text+0x532): undefined reference to `patch__flush_hash_B'
powerpc64-linux-ld: arch/powerpc/mm/book3s32/mmu.o: in function `update_mmu_cache':
mmu.c:(.text.update_mmu_cache+0xa0): undefined reference to `add_hash_page'
powerpc64-linux-ld: mm/memory.o: in function `zap_pte_range':
memory.c:(.text.zap_pte_range+0x160): undefined reference to `flush_hash_pages'
powerpc64-linux-ld: mm/memory.o: in function `handle_pte_fault':
memory.c:(.text.handle_pte_fault+0x180): undefined reference to `hash__flush_tlb_page'

This is due to mmu_has_feature() not being inlined. See extract of build of
mmu.c with -Winline:

In file included from ./include/linux/mm_types.h:19,
                 from ./include/linux/mmzone.h:21,
                 from ./include/linux/gfp.h:6,
                 from ./include/linux/mm.h:10,
                 from arch/powerpc/mm/book3s32/mmu.c:21:
./arch/powerpc/include/asm/mmu.h: In function 'find_free_bat':
./arch/powerpc/include/asm/mmu.h:231:20: warning: inlining failed in call to 'early_mmu_has_feature': call is unlikely and code size would grow [-Winline]
  231 | static inline bool early_mmu_has_feature(unsigned long feature)
      |                    ^~~~~~~~~~~~~~~~~~~~~
./arch/powerpc/include/asm/mmu.h:291:9: note: called from here
  291 |  return early_mmu_has_feature(feature);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The code relies on constant folding of MMU_FTRS_POSSIBLE at buildtime
and elimination of non possible parts of code at compile time.
For this to work, mmu_has_feature() and early_mmu_has_feature()
must be inlined.

Fixes: 259149cf ("powerpc/32s: Only build hash code when CONFIG_PPC_BOOK3S_604 is selected")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cf61345912c078c96f171afd0fcc48ef27cbdc3f.1614443418.git.christophe.leroy@csgroup.eu

The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct vio_driver::remove() return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea.

Note there are two nominally different implementations for a vio bus:
one in arch/sparc/kernel/vio.c and the other in
arch/powerpc/platforms/pseries/vio.c. This patch only adapts the powerpc
one.

Before this patch for a device that was bound to a driver without a
remove callback vio_cmo_bus_remove(viodev) wasn't called. As the device
core still considers the device unbound after vio_bus_remove() returns
calling this unconditionally is the consistent behaviour which is
implemented here.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[mpe: Drop unneeded hvcs_remove() forward declaration, squash in
 change from sfr to drop ibmvnic_remove() forward declaration]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225221834.160083-1-uwe@kleine-koenig.org

As reported by kernel test robot, a randconfig with high amount of
debuging options can lead to build failure for undefined reference
to replay_soft_interrupts() on ppc32.

This is due to gcc not seeing that __prep_irq_for_enabled_exit()
always returns true on ppc32 because it doesn't inline it for
some reason.

Force inlining of __prep_irq_for_enabled_exit() to fix the build.

Fixes: 344bb20b ("powerpc/syscall: Make interrupt.c buildable on PPC32")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/53f3a1f719441761000c41154602bf097d4350b5.1614148356.git.christophe.leroy@csgroup.eu

On book3s/32, page protection is defined by the PP bits in the PTE
which provide the following protection depending on the access
keys defined in the matching segment register:
- PP 00 means RW with key 0 and N/A with key 1.
- PP 01 means RW with key 0 and RO with key 1.
- PP 10 means RW with both key 0 and key 1.
- PP 11 means RO with both key 0 and key 1.

Since the implementation of kernel userspace access protection,
PP bits have been set as follows:
- PP00 for pages without _PAGE_USER
- PP01 for pages with _PAGE_USER and _PAGE_RW
- PP11 for pages with _PAGE_USER and without _PAGE_RW

For kernelspace segments, kernel accesses are performed with key 0
and user accesses are performed with key 1. As PP00 is used for
non _PAGE_USER pages, user can't access kernel pages not flagged
_PAGE_USER while kernel can.

For userspace segments, both kernel and user accesses are performed
with key 0, therefore pages not flagged _PAGE_USER are still
accessible to the user.

This shouldn't be an issue, because userspace is expected to be
accessible to the user. But unlike most other architectures, powerpc
implements PROT_NONE protection by removing _PAGE_USER flag instead of
flagging the page as not valid. This means that pages in userspace
that are not flagged _PAGE_USER shall remain inaccessible.

To get the expected behaviour, just mimic other architectures in the
TLB miss handler by checking _PAGE_USER permission on userspace
accesses as if it was the _PAGE_PRESENT bit.

Note that this problem only is only for 603 cores. The 604+ have
an hash table, and hash_page() function already implement the
verification of _PAGE_USER permission on userspace pages.

Fixes: f342adca ("powerpc/32s: Prepare Kernel Userspace Access Protection")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Christoph Plattner <christoph.plattner@thalesgroup.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4a0c6e3bb8f0c162457bf54d9bc6fd8d7b55129f.1612160907.git.christophe.leroy@csgroup.eu

Depending on the number of online CPUs in the original kernel, it is
likely for CPU #0 to be offline in a kdump kernel. The associated IRQs
in the affinity mappings provided by irq_create_affinity_masks() are
thus not started by irq_startup(), as per-design with managed IRQs.

This can be a problem with multi-queue block devices driven by blk-mq :
such a non-started IRQ is very likely paired with the single queue
enforced by blk-mq during kdump (see blk_mq_alloc_tag_set()). This
causes the device to remain silent and likely hangs the guest at
some point.

This is a regression caused by commit 9ea69a55 ("powerpc/pseries:
Pass MSI affinity to irq_create_mapping()"). Note that this only happens
with the XIVE interrupt controller because XICS has a workaround to bypass
affinity, which is activated during kdump with the "noirqdistrib" kernel
parameter.

The issue comes from a combination of factors:
- discrepancy between the number of queues detected by the multi-queue
  block driver, that was used to create the MSI vectors, and the single
  queue mode enforced later on by blk-mq because of kdump (i.e. keeping
  all queues fixes the issue)
- CPU#0 offline (i.e. kdump always succeed with CPU#0)

Given that I couldn't reproduce on x86, which seems to always have CPU#0
online even during kdump, I'm not sure where this should be fixed. Hence
going for another approach : fine-grained affinity is for performance
and we don't really care about that during kdump. Simply revert to the
previous working behavior of ignoring affinity masks in this case only.

Fixes: 9ea69a55 ("powerpc/pseries: Pass MSI affinity to irq_create_mapping()")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210215094506.1196119-1-groug@kaod.org

lkp reported a build error in fsp2.o:

  CC      arch/powerpc/platforms/44x/fsp2.o
  {standard input}:577: Error: unsupported relocation against base

Which comes from:

  pr_err("GESR0: 0x%08x\n", mfdcr(base + PLB4OPB_GESR0));

Where our mfdcr() macro is stringifying "base + PLB4OPB_GESR0", and
passing that to the assembler, which obviously doesn't work.

The mfdcr() macro already checks that the argument is constant using
__builtin_constant_p(), and if not calls the out-of-line version of
mfdcr(). But in this case GCC is smart enough to notice that "base +
PLB4OPB_GESR0" will be constant, even though it's not something we can
immediately stringify into a register number.

Segher pointed out that passing the register number to the inline asm
as a constant would be better, and in fact it fixes the build error,
presumably because it gives GCC a chance to resolve the value.

While we're at it, change mtdcr() similarly.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210218123058.748882-1-mpe@ellerman.id.au

Pull ide fix from Jens Axboe:
 "This is a leftover fix from 5.11, where I forgot to ship it your way"

* tag 'ide-5.11-2021-02-28' of git://git.kernel.dk/linux-block:
  ide/falconide: Fix module unload

Merge tag 'kbuild-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix UNUSED_KSYMS_WHITELIST for Clang LTO

 - Make -s builds really silent irrespective of V= option

 - Fix build error when SUBLEVEL or PATCHLEVEL is empty

* tag 'kbuild-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Fix <linux/version.h> for empty SUBLEVEL or PATCHLEVEL again
  kbuild: make -s option take precedence over V=1
  ia64: remove redundant READELF from arch/ia64/Makefile
  kbuild: do not include include/config/auto.conf from adjust_autoksyms.sh
  kbuild: fix UNUSED_KSYMS_WHITELIST for Clang LTO
  kbuild: lto: add _mcount to list of used symbols

Pull arch/csky updates from Guo Ren:
 "Features:
   - add new memory layout 2.5G(user):1.5G(kernel)
   - add kmemleak support
   - reconstruct VDSO framework: add VDSO with GENERIC_GETTIMEOFDAY,
     GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO
   - add faulthandler_disabled() check
   - support (fix) swapon
   - add (fix) _PAGE_ACCESSED for default pgprot
   - abort uaccess retries upon fatal signal (from arm)

  Fixes and optimizations:
   - fix perf probe failure
   - fix show_regs doesn't contain regs->usp
   - remove custom asm/atomic.h implementation
   - fix barrier design
   - fix futex SMP implementation
   - fix asm/cmpxchg.h with correct ordering barrier
   - cleanup asm/spinlock.h
   - fix PTE global for 2.5:1.5 virtual memory
   - remove prologue of page fault handler in entry.S
   - fix TLB maintenance synchronization problem
   - add show_tlb for CPU_CK860 debug
   - fix FAULT_FLAG_XXX param for handle_mm_fault
   - fix update_mmu_cache called with user io mapping
   - fix do_page_fault parent irq status
   - fix a size determination in gpr_get()
   - pgtable.h: Coding convention
   - kprobe: Fix code in simulate without 'long'
   - fix pfn_valid error with wrong max_mapnr
   - use free_initmem_default() in free_initmem()
   - fix compile error"

* tag 'csky-for-linus-5.12-rc1' of git://github.com/c-sky/csky-linux: (30 commits)
  csky: Fixup compile error
  csky: use free_initmem_default() in free_initmem()
  csky: Fixup pfn_valid error with wrong max_mapnr
  csky: Add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO
  csky: kprobe: Fixup code in simulate without 'long'
  csky: Fixup swapon
  csky: pgtable.h: Coding convention
  csky: Fixup _PAGE_ACCESSED for default pgprot
  csky: remove unused including <linux/version.h>
  csky: Fix a size determination in gpr_get()
  csky: Reconstruct VDSO framework
  csky: mm: abort uaccess retries upon fatal signal
  csky: Sync riscv mm/fault.c for easy maintenance
  csky: Fixup do_page_fault parent irq status
  csky: Add faulthandler_disabled() check
  csky: Fixup update_mmu_cache called with user io mapping
  csky: Fixup FAULT_FLAG_XXX param for handle_mm_fault
  csky: Add show_tlb for CPU_CK860 debug
  csky: Fix TLB maintenance synchronization problem
  csky: Add kmemleak support
  ...

Pull more RISC-V updates from Palmer Dabbelt:
 "A pair of patches that slipped through the cracks:

   - enable CPU hotplug in the defconfigs

   - some cleanups to setup_bootmem

  There's also a single fix for some randconfig build failures:

   - make NUMA depend on SMP"

* tag 'riscv-for-linus-5.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Cleanup setup_bootmem()
  RISC-V: Enable CPU Hotplug in defconfigs
  RISC-V: Make NUMA depend on SMP

Pull more SCSI updates from James Bottomley:
 "This is a few driver updates (iscsi, mpt3sas) that were still in the
  staging queue when the merge window opened (all committed on or before
  8 Feb) and some small bug fixes which came in during the merge window
  (all committed on 22 Feb)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits)
  scsi: hpsa: Correct dev cmds outstanding for retried cmds
  scsi: sd: Fix Opal support
  scsi: target: tcmu: Fix memory leak caused by wrong uio usage
  scsi: target: tcmu: Move some functions without code change
  scsi: sd: sd_zbc: Don't pass GFP_NOIO to kvcalloc
  scsi: aic7xxx: Remove unused function pointer typedef ahc_bus_suspend/resume_t
  scsi: bnx2fc: Fix Kconfig warning & CNIC build errors
  scsi: ufs: Fix a duplicate dev quirk number
  scsi: aic79xx: Fix spelling of version
  scsi: target: core: Prevent underflow for service actions
  scsi: target: core: Add cmd length set before cmd complete
  scsi: iscsi: Drop session lock in iscsi_session_chkready()
  scsi: qla4xxx: Use iscsi_is_session_online()
  scsi: libiscsi: Reset max/exp cmdsn during recovery
  scsi: iscsi_tcp: Fix shost can_queue initialization
  scsi: libiscsi: Add helper to calculate max SCSI cmds per session
  scsi: libiscsi: Fix iSCSI host workq destruction
  scsi: libiscsi: Fix iscsi_task use after free()
  scsi: libiscsi: Drop taskqueuelock
  scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling
  ...

Pull more xfs updates from Darrick Wong:
 "The most notable fix here prevents premature reuse of freed metadata
  blocks, and adding the ability to detect accidental nested
  transactions, which are not allowed here.

   - Restore a disused sysctl control knob that was inadvertently
     dropped during the merge window to avoid fstests regressions.

   - Don't speculatively release freed blocks from the busy list until
     we're actually allocating them, which fixes a rare log recovery
     regression.

   - Don't nest transactions when scanning for free space.

   - Add an idiot^Wmaintainer light to detect nested transactions. ;)"

* tag 'xfs-5.12-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: use current->journal_info for detecting transaction recursion
  xfs: don't nest transactions when scanning for eofblocks
  xfs: don't reuse busy extents on extent trim
  xfs: restore speculative_cow_prealloc_lifetime sysctl

Pull more block updates from Jens Axboe:
 "A few stragglers (and one due to me missing it originally), and fixes
  for changes in this merge window mostly. In particular:

   - blktrace cleanups (Chaitanya, Greg)

   - Kill dead blk_pm_* functions (Bart)

   - Fixes for the bio alloc changes (Christoph)

   - Fix for the partition changes (Christoph, Ming)

   - Fix for turning off iopoll with polled IO inflight (Jeffle)

   - nbd disconnect fix (Josef)

   - loop fsync error fix (Mauricio)

   - kyber update depth fix (Yang)

   - max_sectors alignment fix (Mikulas)

   - Add bio_max_segs helper (Matthew)"

* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
  block: Add bio_max_segs
  blktrace: fix documentation for blk_fill_rw()
  block: memory allocations in bounce_clone_bio must not fail
  block: remove the gfp_mask argument to bounce_clone_bio
  block: fix bounce_clone_bio for passthrough bios
  block-crypto-fallback: use a bio_set for splitting bios
  block: fix logging on capacity change
  blk-settings: align max_sectors on "logical_block_size" boundary
  block: reopen the device in blkdev_reread_part
  block: don't skip empty device in in disk_uevent
  blktrace: remove debugfs file dentries from struct blk_trace
  nbd: handle device refs for DESTROY_ON_DISCONNECT properly
  kyber: introduce kyber_depth_updated()
  loop: fix I/O error on fsync() in detached loop devices
  block: fix potential IO hang when turning off io_poll
  block: get rid of the trace rq insert wrapper
  blktrace: fix blk_rq_merge documentation
  blktrace: fix blk_rq_issue documentation
  blktrace: add blk_fill_rwbs documentation comment
  block: remove superfluous param in blk_fill_rwbs()
  ...

Commit 78d3bb44 ("kbuild: Fix <linux/version.h> for empty SUBLEVEL
or PATCHLEVEL") fixed the build error for empty SUBLEVEL or PATCHLEVEL
by prepending a zero.

Commit 9b82f13e ("kbuild: clamp SUBLEVEL to 255") re-introduced
this issue.

This time, we cannot take the same approach because we have C code:

  #define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL)
  #define LINUX_VERSION_SUBLEVEL $(SUBLEVEL)

Replace empty SUBLEVEL/PATCHLEVEL with a zero.

Fixes: 9b82f13e ("kbuild: clamp SUBLEVEL to 255")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-and-tested-by: Sasha Levin <sashal@kernel.org>

'make -s' should be really silent. However, 'make -s V=1' prints noisy
log messages from some shell scripts.

Of course, such a combination is odd, but the build system needs to do
the right thing even if a user gives strange input.

If -s is given, KBUILD_VERBOSE should be forced to 0.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

READELF is defined by the top Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit cd195bc4 ("kbuild: split adjust_autoksyms.sh in two parts")
split out the code that needs include/config/auto.conf.

This script no longer needs to include include/config/auto.conf.

Fixes: cd195bc4 ("kbuild: split adjust_autoksyms.sh in two parts")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit fbe078d3 ("kbuild: lto: add a default list of used symbols")
does not work as expected if the .config file has already specified
CONFIG_UNUSED_KSYMS_WHITELIST="my/own/white/list" before enabling
CONFIG_LTO_CLANG.

So, the user-supplied whitelist and LTO-specific white list must be
independent of each other.

I refactored the shell script so CONFIG_MODVERSIONS and CONFIG_CLANG_LTO
handle whitelists in the same way.

Fixes: fbe078d3 ("kbuild: lto: add a default list of used symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>

Pull io_uring thread rewrite from Jens Axboe:
 "This converts the io-wq workers to be forked off the tasks in question
  instead of being kernel threads that assume various bits of the
  original task identity.

  This kills > 400 lines of code from io_uring/io-wq, and it's the worst
  part of the code. We've had several bugs in this area, and the worry
  is always that we could be missing some pieces for file types doing
  unusual things (recent /dev/tty example comes to mind, userfaultfd
  reads installing file descriptors is another fun one... - both of
  which need special handling, and I bet it's not the last weird oddity
  we'll find).

  With these identical workers, we can have full confidence that we're
  never missing anything. That, in itself, is a huge win. Outside of
  that, it's also more efficient since we're not wasting space and code
  on tracking state, or switching between different states.

  I'm sure we're going to find little things to patch up after this
  series, but testing has been pretty thorough, from the usual
  regression suite to production. Any issue that may crop up should be
  manageable.

  There's also a nice series of further reductions we can do on top of
  this, but I wanted to get the meat of it out sooner rather than later.
  The general worry here isn't that it's fundamentally broken. Most of
  the little issues we've found over the last week have been related to
  just changes in how thread startup/exit is done, since that's the main
  difference between using kthreads and these kinds of threads. In fact,
  if all goes according to plan, I want to get this into the 5.10 and
  5.11 stable branches as well.

  That said, the changes outside of io_uring/io-wq are:

   - arch setup, simple one-liner to each arch copy_thread()
     implementation.

   - Removal of net and proc restrictions for io_uring, they are no
     longer needed or useful"

* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
  io-wq: remove now unused IO_WQ_BIT_ERROR
  io_uring: fix SQPOLL thread handling over exec
  io-wq: improve manager/worker handling over exec
  io_uring: ensure SQPOLL startup is triggered before error shutdown
  io-wq: make buffered file write hashed work map per-ctx
  io-wq: fix race around io_worker grabbing
  io-wq: fix races around manager/worker creation and task exit
  io_uring: ensure io-wq context is always destroyed for tasks
  arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
  io_uring: cleanup ->user usage
  io-wq: remove nr_process accounting
  io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
  net: remove cmsg restriction from io_uring based send/recvmsg calls
  Revert "proc: don't allow async path resolution of /proc/self components"
  Revert "proc: don't allow async path resolution of /proc/thread-self components"
  io_uring: move SQPOLL thread io-wq forked worker
  io-wq: make io_wq_fork_thread() available to other users
  io-wq: only remove worker from free_list, if it was there
  io_uring: remove io_identity
  io_uring: remove any grabbing of context
  ...

Pull misc vfs updates from Al Viro:
 "Assorted stuff pile - no common topic here"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  whack-a-mole: don't open-code iminor/imajor
  9p: fix misuse of sscanf() in v9fs_stat2inode()
  audit_alloc_mark(): don't open-code ERR_CAST()
  fs/inode.c: make inode_init_always() initialize i_ino to 0
  vfs: don't unnecessarily clone write access for writable fds

Pull i2c fixes from Wolfram Sang:
 "Three more bugfixes and one revert. I accidently applied one patch too
  early"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: exynos5: Preserve high speed master code
  Revert "i2c: i2c-qcom-geni: Add shutdown callback for i2c"
  i2c: designware: Get right data length
  i2c: brcmstb: Fix brcmstd_send_i2c_cmd condition

: error: C++ style comments are not allowed in ISO C90
 // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
 ^
error: (this will be reported only once per input file)
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>

The existing code is essentially
free_initmem_default()->free_reserved_area() without poisoning.

Note that existing code missed to update the managed page count of the
zone.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>

The max_mapnr is the number of PFNs, not absolute PFN offset.
Using set_max_mapnr API instead of setting the value directly.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>

It could help to reduce the latency of the time-related functions
in user space.

We have referenced arm's and riscv's implementation for the patch.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Vincent Chen <vincent.chen@sifive.com>
Cc: Arnd Bergmann <arnd@arndb.de>

The type of 'val' is 'unsigned long' in simulate_blz32, so 'val < 0'
can't be true.

Cast 'val' to 'long' here to determine branch token or not,

Fixup instructions: bnezad32, bhsz32, bhz32, blsz32, blz32

Link: https://lore.kernel.org/linux-csky/CAJF2gTQjKXR9gpo06WAWG1aquiT87mATiMGorXs6ChxOxoe90Q@mail.gmail.com/T/#tSigned-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>

Current csky's swappon is broken by wrong swap PTE entry format.
Now redesign the new format for abiv1 & abiv2 and make swappon +
zram work properly on csky machines.

C-SKY PTE has VALID, DIRTY to emulate PRESENT, READ, WRITE, EXEC
attributes. GLOBAL bit is shared by two pages in the same tlb
entry. So we need to keep GLOBAL, VALID, PRESENT zero in swp_pte.

To distinguish PAGE_NONE and swp_pte, we need to use an additional
bit (abiv1 is _PAGE_READ, abiv2 is _PAGE_WRITE).
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>

C-SKY page table attributes only have 'Dirty' and 'Valid' to
emulate 'PRESENT, READ, WRITE, EXEC, DIRTY, ACCESSED'.

This patch cleanup unnecessary definition.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>

Some randconfig builds fail with undefined references to _mcount
when CONFIG_TRIM_UNUSED_KSYMS is set:

ERROR: modpost: "_mcount" [drivers/tee/optee/optee.ko] undefined!
ERROR: modpost: "_mcount" [drivers/fsi/fsi-occ.ko] undefined!
ERROR: modpost: "_mcount" [drivers/fpga/dfl-pci.ko] undefined!

Since there is already a list of symbols that get generated at link
time, add this one as well.

Fixes: fbe078d3 ("kbuild: lto: add a default list of used symbols")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

After the following patches,

  commit de043da0 ("RISC-V: Fix usage of memblock_enforce_memory_limit")
  commit 1bd14a66 ("RISC-V: Remove any memblock representing unusable memory area")
  commit b10d6bca ("arch, drivers: replace for_each_membock() with for_each_mem_range()")

some logic is useless, kill the mem_start/start/end and unneeded code.
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The CPU hotplug support has been tested on QEMU, Spike, and SiFive
Unleashed so let's enable it by default in RV32 and RV64 defconfigs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

In theory these are orthogonal, but in practice all NUMA systems are
SMP.  NUMA && !SMP doesn't build, everyone else is coupling them, and I
don't really see any value in supporting that configuration.

Fixes: 4f0e8eef ("riscv: Add numa support for riscv64 platform")
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Atish Patra <atishp@atishpatra.org>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by:  Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the
sign to be the same.  Introduce bio_max_segs() and change BIO_MAX_PAGES to
be unsigned to make it easier for the users.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull documentation fixes from Jonathan Corbet:
 "A handful of late-arriving documentation fixes, nothing all that
  notable"

* tag 'docs-5.12-2' of git://git.lwn.net/linux:
  docs: proc.rst: fix indentation warning
  Documentation: cgroup-v2: fix path to example BPF program
  docs: powerpc: Fix tables in syscall64-abi.rst
  Documentation: features: refresh feature list
  Documentation: features: remove c6x references
  docs: ABI: testing: ima_policy: Fixed missing bracket
  Fix unaesthetic indentation
  scripts: kernel-doc: fix array element capture in pointer-to-func parsing
  doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
  Documentation: proc.rst: add more about the 6 fields in loadavg

Pull OpenRISC updates from Stafford Horne:

 - Update for Litex SoC controller to support wider width registers as
   well as reset.

 - Refactor SMP code to use device tree to define possible cpus.

 - Update build including generating vmlinux.bin

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: Use devicetree to determine present cpus
  drivers/soc/litex: Add restart handler
  openrisc: add arch/openrisc/Kbuild
  drivers/soc/litex: make 'litex_[set|get]_reg()' methods private
  drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs
  drivers/soc/litex: s/LITEX_REG_SIZE/LITEX_SUBREG_ALIGN/g
  drivers/soc/litex: separate MMIO from subregister offset calculation
  drivers/soc/litex: move generic accessors to litex.h
  openrisc: restart: Call common handlers before hanging
  openrisc: Add vmlinux.bin target

Pull more s390 updates from Vasily Gorbik:

 - Fix physical vs virtual confusion in some basic mm macros and
   routines. Caused by __pa == __va on s390 currently.

 - Get rid of on-stack cpu masks.

 - Add support for complete CPU counter set extraction.

 - Add arch_irq_work_raise implementation.

 - virtio-ccw revision and opcode fixes.

* tag 's390-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cpumf: Add support for complete counter set extraction
  virtio/s390: implement virtio-ccw revision 2 correctly
  s390/smp: implement arch_irq_work_raise()
  s390/topology: move cpumasks away from stack
  s390/smp: smp_emergency_stop() - move cpumask away from stack
  s390/smp: __smp_rescan_cpus() - move cpumask away from stack
  s390/smp: consolidate locking for smp_rescan()
  s390/mm: fix phys vs virt confusion in vmem_*() functions family
  s390/mm: fix phys vs virt confusion in pgtable allocation routines
  s390/mm: fix invalid __pa() usage in pfn_pXd() macros
  s390/mm: make pXd_deref() macros return a pointer
  s390/opcodes: rename selhhhr to selfhr

Pull cifs updates from Steve French:

 - improvements to mode bit conversion, chmod and chown when using
   cifsacl mount option

 - two new mount options for controlling attribute caching

 - improvements to crediting and reconnect, improved debugging

 - reconnect fix

 - add SMB3.1.1 dialect to default dialects for vers=3

* tag '5.12-smb3-part1' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
  cifs: update internal version number
  cifs: use discard iterator to discard unneeded network data more efficiently
  cifs: introduce helper for finding referral server to improve DFS target resolution
  cifs: check all path components in resolved dfs target
  cifs: fix DFS failover
  cifs: fix nodfs mount option
  cifs: fix handling of escaped ',' in the password mount argument
  cifs: Add new parameter "acregmax" for distinct file and directory metadata timeout
  cifs: convert revalidate of directories to using directory metadata cache timeout
  cifs: Add new mount parameter "acdirmax" to allow caching directory metadata
  cifs: If a corrupted DACL is returned by the server, bail out.
  cifs: minor simplification to smb2_is_network_name_deleted
  TCON Reconnect during STATUS_NETWORK_NAME_DELETED
  cifs: cleanup a few le16 vs. le32 uses in cifsacl.c
  cifs: Change SIDs in ACEs while transferring file ownership.
  cifs: Retain old ACEs when converting between mode bits and ACL.
  cifs: Fix cifsacl ACE mask for group and others.
  cifs: clarify hostname vs ip address in /proc/fs/cifs/DebugData
  cifs: change confusing field serverName (to ip_addr)
  cifs: Fix inconsistent IS_ERR and PTR_ERR
  ...