- 17 Oct, 2024 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes, nothing really stands out: - Usual HD-audio quirks / device-specific fixes - Kconfig dependency fix for UM - A series of minor fixes for SoundWire - Updates of USB-audio LINE6 contact address" * tag 'sound-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2 ALSA/hda: intel-sdw-acpi: add support for sdw-manager-list property read ALSA/hda: intel-sdw-acpi: simplify sdw-master-count property read ALSA/hda: intel-sdw-acpi: fetch fwnode once in sdw_intel_scan_controller() ALSA/hda: intel-sdw-acpi: cleanup sdw_intel_scan_controller ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projects ALSA: scarlett2: Add error check after retrieving PEQ filter values ALSA: hda/cs8409: Fix possible NULL dereference sound: Make CONFIG_SND depend on INDIRECT_IOMEM instead of UML ALSA: line6: update contact information ALSA: usb-audio: Fix NULL pointer deref in snd_usb_power_domain_set() ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2 ALSA: hda: Sound support for HP Spectre x360 16 inch model 2024
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Current release - new code bugs: - eth: mlx5: HWS, don't destroy more bwc queue locks than allocated Previous releases - regressions: - ipv4: give an IPv4 dev to blackhole_netdev - udp: compute L4 checksum as usual when not segmenting the skb - tcp/dccp: don't use timer_pending() in reqsk_queue_unlink(). - eth: mlx5e: don't call cleanup on profile rollback failure - eth: microchip: vcap api: fix memory leaks in vcap_api_encode_rule_test() - eth: enetc: disable Tx BD rings after they are empty - eth: macb: avoid 20s boot delay by skipping MDIO bus registration for fixed-link PHY Previous releases - always broken: - posix-clock: fix missing timespec64 check in pc_clock_settime() - genetlink: hold RCU in genlmsg_mcast() - mptcp: prevent MPC handshake on port-based signal endpoints - eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame - eth: stmmac: dwmac-tegra: fix link bring-up sequence - eth: bcmasp: fix potential memory leak in bcmasp_xmit() Misc: - add Andrew Lunn as a co-maintainer of all networking drivers" * tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) net/mlx5e: Don't call cleanup on profile rollback failure net/mlx5: Unregister notifier on eswitch init failure net/mlx5: Fix command bitmask initialization net/mlx5: Check for invalid vector index on EQ creation net/mlx5: HWS, use lock classes for bwc locks net/mlx5: HWS, don't destroy more bwc queue locks than allocated net/mlx5: HWS, fixed double free in error flow of definer layout net/mlx5: HWS, removed wrong access to a number of rules variable mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame net: dsa: vsc73xx: fix reception from VLAN-unaware bridges net: ravb: Only advertise Rx/Tx timestamps if hardware supports it net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test() net: phy: mdio-bcm-unimac: Add BCM6846 support dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio udp: Compute L4 checksum as usual when not segmenting the skb genetlink: hold RCU in genlmsg_mcast() net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361 tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink(). ... -
Paolo Abeni authored
Tariq Toukan says: ==================== mlx5 misc fixes 2024-10-15 This patchset provides misc bug fixes from the team to the mlx5 core and Eth drivers. Series generated against: commit 174714f0 ("selftests: drivers: net: fix name not defined") ==================== Link: https://patch.msgid.link/20241015093208.197603-1-tariqt@nvidia.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Cosmin Ratiu authored
When profile rollback fails in mlx5e_netdev_change_profile, the netdev profile var is left set to NULL. Avoid a crash when unloading the driver by not calling profile->cleanup in such a case. This was encountered while testing, with the original trigger that the wq rescuer thread creation got interrupted (presumably due to Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by mlx5e_priv_init, the profile rollback also fails for the same reason (signal still active) so the profile is left as NULL, leading to a crash later in _mlx5e_remove. [ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2) [ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12 [ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 [ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 745.538222] #PF: supervisor read access in kernel mode <snipped> [ 745.551290] Call Trace: [ 745.551590] <TASK> [ 745.551866] ? __die+0x20/0x60 [ 745.552218] ? page_fault_oops+0x150/0x400 [ 745.555307] ? exc_page_fault+0x79/0x240 [ 745.555729] ? asm_exc_page_fault+0x22/0x30 [ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core] [ 745.556698] auxiliary_bus_remove+0x18/0x30 [ 745.557134] device_release_driver_internal+0x1df/0x240 [ 745.557654] bus_remove_device+0xd7/0x140 [ 745.558075] device_del+0x15b/0x3c0 [ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core] [ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core] [ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core] [ 745.560203] remove_one+0x4e/0xd0 [mlx5_core] [ 745.560694] pci_device_remove+0x39/0xa0 [ 745.561112] device_release_driver_internal+0x1df/0x240 [ 745.561631] driver_detach+0x47/0x90 [ 745.562022] bus_remove_driver+0x84/0x100 [ 745.562444] pci_unregister_driver+0x3b/0x90 [ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core] [ 745.563415] __x64_sys_delete_module+0x14d/0x2f0 [ 745.563886] ? kmem_cache_free+0x1b0/0x460 [ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190 [ 745.564825] do_syscall_64+0x6d/0x140 [ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 745.565725] RIP: 0033:0x7f1579b1288b Fixes: 3ef14e46 ("net/mlx5e: Separate between netdev objects and mlx5e profiles initialization") Signed-off-by:
Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Cosmin Ratiu authored
It otherwise remains registered and a subsequent attempt at eswitch enabling might trigger warnings of the sort: [ 682.589148] ------------[ cut here ]------------ [ 682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered [ 682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90 [...snipped] [ 682.610052] Call Trace: [ 682.610369] <TASK> [ 682.610663] ? __warn+0x7c/0x110 [ 682.611050] ? notifier_chain_register+0x3e/0x90 [ 682.611556] ? report_bug+0x148/0x170 [ 682.611977] ? handle_bug+0x36/0x70 [ 682.612384] ? exc_invalid_op+0x13/0x60 [ 682.612817] ? asm_exc_invalid_op+0x16/0x20 [ 682.613284] ? notifier_chain_register+0x3e/0x90 [ 682.613789] atomic_notifier_chain_register+0x25/0x40 [ 682.614322] mlx5_eswitch_enable_locked+0x1d4/0x3b0 [mlx5_core] [ 682.614965] mlx5_eswitch_enable+0xc9/0x100 [mlx5_core] [ 682.615551] mlx5_device_enable_sriov+0x25/0x340 [mlx5_core] [ 682.616170] mlx5_core_sriov_configure+0x50/0x170 [mlx5_core] [ 682.616789] sriov_numvfs_store+0xb0/0x1b0 [ 682.617248] kernfs_fop_write_iter+0x117/0x1a0 [ 682.617734] vfs_write+0x231/0x3f0 [ 682.618138] ksys_write+0x63/0xe0 [ 682.618536] do_syscall_64+0x4c/0x100 [ 682.618958] entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: 7624e58a ("net/mlx5: E-switch, register event handler before arming the event") Signed-off-by:
-
Shay Drory authored
Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit isn't Initialize during command bitmask Initialization, only during MANAGE_PAGES. In addition, mlx5_cmd_trigger_completions() is trying to trigger completion for MANAGE_PAGES command as well. Hence, in case health error occurred before any MANAGE_PAGES command have been invoke (for example, during mlx5_enable_hca()), mlx5_cmd_trigger_completions() will try to trigger completion for MANAGE_PAGES command, which will result in null-ptr-deref error.[1] Fix it by Initialize command bitmask correctly. While at it, re-write the code for better understanding. [1] BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078 CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 kasan_report+0xb9/0xf0 kasan_check_range+0xec/0x190 mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] mlx5_cmd_flush+0x94/0x240 [mlx5_core] enter_error_state+0x6c/0xd0 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core] process_one_work+0x787/0x1490 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0xda0/0xda0 ? assign_work+0x168/0x240 worker_thread+0x586/0xd30 ? rescuer_thread+0xae0/0xae0 kthread+0x2df/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Fixes: 9b98d395 ("net/mlx5: Start health poll at earlier stage of driver load") Signed-off-by:
Shay Drory <shayd@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Maher Sanalla authored
Currently, mlx5 driver does not enforce vector index to be lower than the maximum number of supported completion vectors when requesting a new completion EQ. Thus, mlx5_comp_eqn_get() fails when trying to acquire an IRQ with an improper vector index. To prevent the case above, enforce that vector index value is valid and lower than maximum in mlx5_comp_eqn_get() before handling the request. Fixes: f14c1a14 ("net/mlx5: Allocate completion EQs dynamically") Signed-off-by:
Maher Sanalla <msanalla@nvidia.com> Signed-off-by:
-
Cosmin Ratiu authored
The HWS BWC API uses one lock per queue and usually acquires one of them, except when doing changes which require locking all queues in order. Naturally, lockdep isn't too happy about acquiring the same lock class multiple times, so inform it that each queue lock is a different class to avoid false positives. Fixes: 2ca62599 ("net/mlx5: HWS, added send engine and context handling") Signed-off-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by:
-
Cosmin Ratiu authored
hws_send_queues_bwc_locks_destroy destroyed more queue locks than allocated, leading to memory corruption (occasionally) and warnings such as DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) in __mutex_destroy because sometimes, the 'mutex' being destroyed was random memory. The severity of this problem is proportional to the number of queues configured because the code overreaches beyond the end of the bwc_send_queue_locks array by 2x its length. Fix that by using the correct number of bwc queues. Fixes: 2ca62599 ("net/mlx5: HWS, added send engine and context handling") Signed-off-by:
-
Yevgeny Kliteynik authored
Fix error flow bug that could lead to double free of a buffer during a failure to calculate a suitable definer layout. Fixes: 74a778b4 ("net/mlx5: HWS, added definers handling") Signed-off-by:
Itamar Gozlan <igozlan@nvidia.com> Signed-off-by:
-
Yevgeny Kliteynik authored
Removed wrong access to the num_of_rules field of the matcher. This is a usual u32 variable, but the access was as if it was atomic. This fixes the following CI warnings: mlx5hws_bwc.c:708:17: warning: large atomic operation may incur significant performance penalty; the access size (4 bytes) exceeds the max lock-free size (0 bytes) [-Watomic-alignment] Fixes: 510f9f61 ("net/mlx5: HWS, added API and enabled HWS support") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409291101.6NdtMFVC-lkp@intel.com/Signed-off-by:
-
Matthieu Baerts (NGI0) authored
Syzkaller reported this splat: ================================================================== BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662 CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c25451 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline] mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572 mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg net/socket.c:744 [inline] ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661 __sys_sendmsg+0x117/0x1f0 net/socket.c:2690 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7fe4579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 5387: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803 subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956 __tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline] tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167 mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764 __mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592 mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642 mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline] mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943 mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777 process_one_work+0x958/0x1b30 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 113: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x51/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_hook mm/slub.c:2342 [inline] slab_free mm/slub.c:4579 [inline] kfree+0x14f/0x4b0 mm/slub.c:4727 kvfree+0x47/0x50 mm/util.c:701 kvfree_rcu_list+0xf5/0x2c0 kernel/rcu/tree.c:3423 kvfree_rcu_drain_ready kernel/rcu/tree.c:3563 [inline] kfree_rcu_monitor+0x503/0x8b0 kernel/rcu/tree.c:3632 kfree_rcu_shrink_scan+0x245/0x3a0 kernel/rcu/tree.c:3966 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab+0x32b/0x12a0 mm/shrinker.c:662 shrink_one+0x47e/0x7b0 mm/vmscan.c:4818 shrink_many mm/vmscan.c:4879 [inline] lru_gen_shrink_node mm/vmscan.c:4957 [inline] shrink_node+0x2452/0x39d0 mm/vmscan.c:5937 kswapd_shrink_node mm/vmscan.c:6765 [inline] balance_pgdat+0xc19/0x18f0 mm/vmscan.c:6957 kswapd+0x5ea/0xbf0 mm/vmscan.c:7226 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Last potentially related work creation: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 __kasan_record_aux_stack+0xba/0xd0 mm/kasan/generic.c:541 kvfree_call_rcu+0x74/0xbe0 kernel/rcu/tree.c:3810 subflow_ulp_release+0x2ae/0x350 net/mptcp/subflow.c:2009 tcp_cleanup_ulp+0x7c/0x130 net/ipv4/tcp_ulp.c:124 tcp_v4_destroy_sock+0x1c5/0x6a0 net/ipv4/tcp_ipv4.c:2541 inet_csk_destroy_sock+0x1a3/0x440 net/ipv4/inet_connection_sock.c:1293 tcp_done+0x252/0x350 net/ipv4/tcp.c:4870 tcp_rcv_state_process+0x379b/0x4f30 net/ipv4/tcp_input.c:6933 tcp_v4_do_rcv+0x1ad/0xa90 net/ipv4/tcp_ipv4.c:1938 sk_backlog_rcv include/net/sock.h:1115 [inline] __release_sock+0x31b/0x400 net/core/sock.c:3072 __tcp_close+0x4f3/0xff0 net/ipv4/tcp.c:3142 __mptcp_close_ssk+0x331/0x14d0 net/mptcp/protocol.c:2489 mptcp_close_ssk net/mptcp/protocol.c:2543 [inline] mptcp_close_ssk+0x150/0x220 net/mptcp/protocol.c:2526 mptcp_pm_nl_rm_addr_or_subflow+0x2be/0xcc0 net/mptcp/pm_netlink.c:878 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline] mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572 mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg net/socket.c:744 [inline] ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661 __sys_sendmsg+0x117/0x1f0 net/socket.c:2690 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e The buggy address belongs to the object at ffff8880569ac800 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 88 bytes inside of freed 512-byte region [ffff8880569ac800, ffff8880569aca00) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x569ac head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x4fff00000000040(head|node=1|zone=1|lastcpupid=0x7ff) page_type: f5(slab) raw: 04fff00000000040 ffff88801ac42c80 dead000000000100 dead000000000122 raw: 0000000000000000 0000000080100010 00000001f5000000 0000000000000000 head: 04fff00000000040 ffff88801ac42c80 dead000000000100 dead000000000122 head: 0000000000000000 0000000080100010 00000001f5000000 0000000000000000 head: 04fff00000000002 ffffea00015a6b01 ffffffffffffffff 0000000000000000 head: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 10238, tgid 10238 (kworker/u32:6), ts 597403252405, free_ts 597177952947 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x2d1/0x350 mm/page_alloc.c:1537 prep_new_page mm/page_alloc.c:1545 [inline] get_page_from_freelist+0x101e/0x3070 mm/page_alloc.c:3457 __alloc_pages_noprof+0x223/0x25a0 mm/page_alloc.c:4733 alloc_pages_mpol_noprof+0x2c9/0x610 mm/mempolicy.c:2265 alloc_slab_page mm/slub.c:2412 [inline] allocate_slab mm/slub.c:2578 [inline] new_slab+0x2ba/0x3f0 mm/slub.c:2631 ___slab_alloc+0xd1d/0x16f0 mm/slub.c:3818 __slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908 __slab_alloc_node mm/slub.c:3961 [inline] slab_alloc_node mm/slub.c:4122 [inline] __kmalloc_cache_noprof+0x2c5/0x310 mm/slub.c:4290 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] mld_add_delrec net/ipv6/mcast.c:743 [inline] igmp6_leave_group net/ipv6/mcast.c:2625 [inline] igmp6_group_dropped+0x4ab/0xe40 net/ipv6/mcast.c:723 __ipv6_dev_mc_dec+0x281/0x360 net/ipv6/mcast.c:979 addrconf_leave_solict net/ipv6/addrconf.c:2253 [inline] __ipv6_ifa_notify+0x3f6/0xc30 net/ipv6/addrconf.c:6283 addrconf_ifdown.isra.0+0xef9/0x1a20 net/ipv6/addrconf.c:3982 addrconf_notify+0x220/0x19c0 net/ipv6/addrconf.c:3781 notifier_call_chain+0xb9/0x410 kernel/notifier.c:93 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1996 call_netdevice_notifiers_extack net/core/dev.c:2034 [inline] call_netdevice_notifiers net/core/dev.c:2048 [inline] dev_close_many+0x333/0x6a0 net/core/dev.c:1589 page last free pid 13136 tgid 13136 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1108 [inline] free_unref_page+0x5f4/0xdc0 mm/page_alloc.c:2638 stack_depot_save_flags+0x2da/0x900 lib/stackdepot.c:666 kasan_save_stack+0x42/0x60 mm/kasan/common.c:48 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x89/0x90 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4085 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_noprof+0x121/0x2f0 mm/slub.c:4141 skb_clone+0x190/0x3f0 net/core/skbuff.c:2084 do_one_broadcast net/netlink/af_netlink.c:1462 [inline] netlink_broadcast_filtered+0xb11/0xef0 net/netlink/af_netlink.c:1540 netlink_broadcast+0x39/0x50 net/netlink/af_netlink.c:1564 uevent_net_broadcast_untagged lib/kobject_uevent.c:331 [inline] kobject_uevent_net_broadcast lib/kobject_uevent.c:410 [inline] kobject_uevent_env+0xacd/0x1670 lib/kobject_uevent.c:608 device_del+0x623/0x9f0 drivers/base/core.c:3882 snd_card_disconnect.part.0+0x58a/0x7c0 sound/core/init.c:546 snd_card_disconnect+0x1f/0x30 sound/core/init.c:495 snd_usx2y_disconnect+0xe9/0x1f0 sound/usb/usx2y/usbusx2y.c:417 usb_unbind_interface+0x1e8/0x970 drivers/usb/core/driver.c:461 device_remove drivers/base/dd.c:569 [inline] device_remove+0x122/0x170 drivers/base/dd.c:561 That's because 'subflow' is used just after 'mptcp_close_ssk(subflow)', which will initiate the release of its memory. Even if it is very likely the release and the re-utilisation will be done later on, it is of course better to avoid any issues and read the content of 'subflow' before closing it. Fixes: 1c1f7213 ("mptcp: pm: only decrement add_addr_accepted for MPJ req") Cc: stable@vger.kernel.org Reported-by: syzbot+3c8b7a8e7df6a2a226ca@syzkaller.appspotmail.com Closes: https://lore.kernel.org/670d7337.050a0220.4cbc0.004f.GAE@google.comSigned-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Acked-by:
-
Felix Fietkau authored
The loop responsible for allocating up to MTK_FQ_DMA_LENGTH buffers must only touch as many descriptors, otherwise it ends up corrupting unrelated memory. Fix the loop iteration count accordingly. Fixes: c57e5581 ("net: ethernet: mtk_eth_soc: handle dma buffer size soc specific") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241015081755.31060-1-nbd@nbd.nameSigned-off-by:
-
Daniel Borkmann authored
Andrew and Nikolay reported connectivity issues with Cilium's service load-balancing in case of vmxnet3. If a BPF program for native XDP adds an encapsulation header such as IPIP and transmits the packet out the same interface, then in case of vmxnet3 a corrupted packet is being sent and subsequently dropped on the path. vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp() through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address: page = virt_to_page(xdpf->data); tbi->dma_addr = page_pool_get_dma_addr(page) + VMXNET3_XDP_HEADROOM; dma_sync_single_for_device(&adapter->pdev->dev, tbi->dma_addr, buf_size, DMA_TO_DEVICE); The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP BPF program could have moved xdp->data. While the passed buf_size is correct (xdpf->len), the dma_addr needs to have a dynamic offset which can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data - xdp->data_hard_start. Fixes: 54f00cce ("vmxnet3: Add XDP support.") Reported-by:Andrew Sauber <andrew.sauber@isovalent.com> Reported-by:
Nikolay Nikolaev <nikolay.nikolaev@isovalent.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Tested-by:
Anton Protopopov <aspsk@isovalent.com> Cc: William Tu <witu@nvidia.com> Cc: Ronak Doshi <ronak.doshi@broadcom.com> Link: https://patch.msgid.link/a0888656d7f09028f9984498cc698bb5364d89fc.1728931137.git.daniel@iogearbox.netSigned-off-by:
-
- 16 Oct, 2024 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Several miscellaneous fixes. A lot of bnxt_re activity, there will be more rc patches there coming. - Many bnxt_re bug fixes - Memory leaks, kasn, NULL pointer deref, soft lockups, error unwinding and some small functional issues - Error unwind bug in rdma netlink - Two issues with incorrect VLAN detection for iWarp - skb_splice_from_iter() splat in siw - Give SRP slab caches unique names to resolve the merge window WARN_ON regression" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/bnxt_re: Fix the GID table length RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages RDMA/bnxt_re: Change the sequence of updating the CQ toggle value RDMA/bnxt_re: Fix an error path in bnxt_re_add_device RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop RDMA/bnxt_re: Fix a possible NULL pointer dereference RDMA/bnxt_re: Return more meaningful error RDMA/bnxt_re: Fix incorrect dereference of srq in async event RDMA/bnxt_re: Fix out of bound check RDMA/bnxt_re: Fix the max CQ WQEs for older adapters RDMA/srpt: Make slab cache names unique RDMA/irdma: Fix misspelling of "accept*" RDMA/cxgb4: Fix RDMA_CM_EVENT_UNREACHABLE error for iWARP RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES RDMA/core: Fix ENODEV error for iWARP test over vlan RDMA/nldev: Fix NULL pointer dereferences issue in rdma_nl_notify_event RDMA/bnxt_re: Fix the max WQEs used in Static WQE mode RDMA/bnxt_re: Add a check for memory allocation RDMA/bnxt_re: Fix incorrect AVID type in WQE structure RDMA/bnxt_re: Fix a possible memory leak -
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - regression fix: dirty extents tracked in xarray for qgroups must be adjusted for 32bit platforms - fix potentially freeing uninitialized name in fscrypt structure - fix warning about unneeded variable in a send callback * tag 'for-6.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix uninitialized pointer free on read_alloc_one_name() error btrfs: send: cleanup unneeded return variable in changed_verity() btrfs: fix uninitialized pointer free in add_inode_ref() btrfs: use sector numbers as keys for the dirty extents xarray
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull smb server fixes from Steve French: - fix race between session setup and session logoff - add supplementary group support * tag 'v6.12-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: add support for supplementary groups ksmbd: fix user-after-free from session log off
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - Remove bogus testmgr ENOENT error messages - Ensure algorithm is still alive before marking it as tested - Disable buggy hash algorithms in marvell/cesa * tag 'v6.12-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: marvell/cesa - Disable hash algorithms crypto: testmgr - Hide ENOENT errors better crypto: api - Fix liveliness check in crypto_alg_tested
-
Vasiliy Kovalev authored
The cached version avoids redundant commands to the codec, improving stability and reducing unnecessary operations. This change ensures better power management and reliable restoration of pin configurations, especially after hibernation (S4) and other power transitions. Fixes: 9988844c ("ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2") Suggested-by:
Kai-Heng Feng <kaihengf@nvidia.com> Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Vasiliy Kovalev <kovalev@altlinux.org> Link: https://patch.msgid.link/20241016080713.46801-1-kovalev@altlinux.orgSigned-off-by:
-
Linus Torvalds authored
Merge tag 'sched_ext-for-6.12-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fixes from Tejun Heo: - More issues reported in the enable/disable paths on large machines with many tasks due to scx_tasks_lock being held too long. Break up the task iterations - Remove ops.select_cpu() dependency in bypass mode so that a misbehaving implementation can't live-lock the machine by pushing all tasks to few CPUs in bypass mode - Other misc fixes * tag 'sched_ext-for-6.12-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Remove unnecessary cpu_relax() sched_ext: Don't hold scx_tasks_lock for too long sched_ext: Move scx_tasks_lock handling into scx_task_iter helpers sched_ext: bypass mode shouldn't depend on ops.select_cpu() sched_ext: Move scx_buildin_idle_enabled check to scx_bpf_select_cpu_dfl() sched_ext: Start schedulers with consistent p->scx.slice values Revert "sched_ext: Use shorter slice while bypassing" sched_ext: use correct function name in pick_task_scx() warning message selftests: sched_ext: Add sched_ext as proper selftest target
-
Vladimir Oltean authored
Similar to the situation described for sja1105 in commit 1f9fc48f ("net: dsa: sja1105: fix reception from VLAN-unaware bridges"), the vsc73xx driver uses tag_8021q and doesn't need the ds->untag_bridge_pvid request. In fact, this option breaks packet reception. The ds->untag_bridge_pvid option strips VLANs from packets received on VLAN-unaware bridge ports. But those VLANs should already be stripped by tag_vsc73xx_8021q.c as part of vsc73xx_rcv() - they are not VLANs in VLAN-unaware mode, but DSA tags. Thus, dsa_software_vlan_untag() tries to untag a VLAN that doesn't exist, corrupting the packet. Fixes: 93e4649e ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges") Tested-by:
Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patch.msgid.link/20241014153041.1110364-1-vladimir.oltean@nxp.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Niklas Söderlund authored
Recent work moving the reporting of Rx software timestamps to the core [1] highlighted an issue where hardware time stamping was advertised for the platforms where it is not supported. Fix this by covering advertising support for hardware timestamps only if the hardware supports it. Due to the Tx implementation in RAVB software Tx timestamping is also only considered if the hardware supports hardware timestamps. This should be addressed in future, but this fix only reflects what the driver currently implements. 1. Commit 277901ee ("ravb: Remove setting of RX software timestamp") Fixes: 7e09a052 ("ravb: Exclude gPTP feature support for RZ/G2L") Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Paul Barker <paul.barker.ct@bp.renesas.com> Tested-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://patch.msgid.link/20241014124343.3875285-1-niklas.soderlund+renesas@ragnatech.seSigned-off-by:
-
Jinjie Ruan authored
Commit a3c1e451 ("net: microchip: vcap: Fix use-after-free error in kunit test") fixed the use-after-free error, but introduced below memory leaks by removing necessary vcap_free_rule(), add it to fix it. unreferenced object 0xffffff80ca58b700 (size 192): comm "kunit_try_catch", pid 1215, jiffies 4294898264 hex dump (first 32 bytes): 00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d... 00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................ backtrace (crc 9c09c3fe): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4 [<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0400 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X..... 39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9............... backtrace (crc daf014e9): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0700 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X..... 3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../...... backtrace (crc 8d877792): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c [<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0900 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................ 7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }............... backtrace (crc 34181e56): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0980 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X............. 67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t..... backtrace (crc 275fd9be): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<000000001396a1a2>] test_add_def_fields+0xb0/0x100 [<000000006e7621f0>] vcap_val_rule+0xa98/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 ...... Cc: stable@vger.kernel.org Fixes: a3c1e451 ("net: microchip: vcap: Fix use-after-free error in kunit test") Reviewed-by:
Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com> Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patch.msgid.link/20241014121922.1280583-1-ruanjinjie@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Linus Walleij says: ==================== net: phy: mdio-bcm-unimac: Add BCM6846 variant As pointed out by Florian: https://lore.kernel.org/linux-devicetree/b542b2e8-115c-4234-a464-e73aa6bece5c@broadcom.com/ The BCM6846 has a few extra registers and cannot reuse the compatible string from other variants of the Unimac MDIO block: we need to be able to tell them apart. ==================== Link: https://patch.msgid.link/20241012-bcm6846-mdio-v1-0-c703ca83e962@linaro.orgSigned-off-by:
-
Linus Walleij authored
Add Unimac mdio compatible string for the special BCM6846 variant. This variant has a few extra registers compared to other versions. Suggested-by:
-
Linus Walleij authored
The MDIO block in the BCM6846 is not identical to any of the previous versions, but has extended registers not present in the other variants. For this reason we need to use a new compatible especially for this SoC. Suggested-by:
Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20241012-bcm6846-mdio-v1-1-c703ca83e962@linaro.orgSigned-off-by:
-
Jakub Sitnicki authored
If: 1) the user requested USO, but 2) there is not enough payload for GSO to kick in, and 3) the egress device doesn't offer checksum offload, then we want to compute the L4 checksum in software early on. In the case when we are not taking the GSO path, but it has been requested, the software checksum fallback in skb_segment doesn't get a chance to compute the full checksum, if the egress device can't do it. As a result we end up sending UDP datagrams with only a partial checksum filled in, which the peer will discard. Fixes: 10154dbd ("udp: Allow GSO transmit from devices with no checksum offload") Reported-by:
Ivan Babrou <ivan@cloudflare.com> Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Acked-by:
Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20241011-uso-swcsum-fixup-v2-1-6e1ddc199af9@cloudflare.comSigned-off-by:
-
Eric Dumazet authored
While running net selftests with CONFIG_PROVE_RCU_LIST=y I saw one lockdep splat [1]. genlmsg_mcast() uses for_each_net_rcu(), and must therefore hold RCU. Instead of letting all callers guard genlmsg_multicast_allns() with a rcu_read_lock()/rcu_read_unlock() pair, do it in genlmsg_mcast(). This also means the @flags parameter is useless, we need to always use GFP_ATOMIC. [1] [10882.424136] ============================= [10882.424166] WARNING: suspicious RCU usage [10882.424309] 6.12.0-rc2-virtme #1156 Not tainted [10882.424400] ----------------------------- [10882.424423] net/netlink/genetlink.c:1940 RCU-list traversed in non-reader section!! [10882.424469] other info that might help us debug this: [10882.424500] rcu_scheduler_active = 2, debug_locks = 1 [10882.424744] 2 locks held by ip/15677: [10882.424791] #0: ffffffffb6b491b0 (cb_lock){++++}-{3:3}, at: genl_rcv (net/netlink/genetlink.c:1219) [10882.426334] #1: ffffffffb6b49248 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg (net/netlink/genetlink.c:61 net/netlink/genetlink.c:57 net/netlink/genetlink.c:1209) [10882.426465] stack backtrace: [10882.426805] CPU: 14 UID: 0 PID: 15677 Comm: ip Not tainted 6.12.0-rc2-virtme #1156 [10882.426919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [10882.427046] Call Trace: [10882.427131] <TASK> [10882.427244] dump_stack_lvl (lib/dump_stack.c:123) [10882.427335] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) [10882.427387] genlmsg_multicast_allns (net/netlink/genetlink.c:1940 (discriminator 7) net/netlink/genetlink.c:1977 (discriminator 7)) [10882.427436] l2tp_tunnel_notify.constprop.0 (net/l2tp/l2tp_netlink.c:119) l2tp_netlink [10882.427683] l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:253) l2tp_netlink [10882.427748] genl_family_rcv_msg_doit (net/netlink/genetlink.c:1115) [10882.427834] genl_rcv_msg (net/netlink/genetlink.c:1195 net/netlink/genetlink.c:1210) [10882.427877] ? __pfx_l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:186) l2tp_netlink [10882.427927] ? __pfx_genl_rcv_msg (net/netlink/genetlink.c:1201) [10882.427959] netlink_rcv_skb (net/netlink/af_netlink.c:2551) [10882.428069] genl_rcv (net/netlink/genetlink.c:1220) [10882.428095] netlink_unicast (net/netlink/af_netlink.c:1332 net/netlink/af_netlink.c:1357) [10882.428140] netlink_sendmsg (net/netlink/af_netlink.c:1901) [10882.428210] ____sys_sendmsg (net/socket.c:729 (discriminator 1) net/socket.c:744 (discriminator 1) net/socket.c:2607 (discriminator 1)) Fixes: 33f72e6f ("l2tp : multicast notification to the registered listeners") Signed-off-by:Eric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Cc: Tom Parkin <tparkin@katalix.com> Cc: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20241011171217.3166614-1-edumazet@google.comSigned-off-by:
-
Peter Rashleigh authored
According to the Marvell datasheet the 88E6361 has two VTU pages (4k VIDs per page) so the max_vid should be 8191, not 4095. In the current implementation mv88e6xxx_vtu_walk() gives unexpected results because of this error. I verified that mv88e6xxx_vtu_walk() works correctly on the MV88E6361 with this patch in place. Fixes: 12899f29 ("net: dsa: mv88e6xxx: enable support for 88E6361 switch") Signed-off-by:
Peter Rashleigh <peter@rashleigh.ca> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241014204342.5852-1-peter@rashleigh.caSigned-off-by:
-
Kuniyuki Iwashima authored
Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler(). """ We are seeing a use-after-free from a bpf prog attached to trace_tcp_retransmit_synack. The program passes the req->sk to the bpf_sk_storage_get_tracing kernel helper which does check for null before using it. """ The commit 83fccfc3 ("inet: fix potential deadlock in reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not to call del_timer_sync() from reqsk_timer_handler(), but it introduced a small race window. Before the timer is called, expire_timers() calls detach_timer(timer, true) to clear timer->entry.pprev and marks it as not pending. If reqsk_queue_unlink() checks timer_pending() just after expire_timers() calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will continue running and send multiple SYN+ACKs until it expires. The reported UAF could happen if req->sk is close()d earlier than the timer expiration, which is 63s by default. The scenario would be 1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(), but del_timer_sync() is missed 2. reqsk timer is executed and scheduled again 3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but reqsk timer still has another one, and inet_csk_accept() does not clear req->sk for non-TFO sockets 4. sk is close()d 5. reqsk timer is executed again, and BPF touches req->sk Let's not use timer_pending() by passing the caller context to __inet_csk_reqsk_queue_drop(). Note that reqsk timer is pinned, so the issue does not happen in most use cases. [1] [0] BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0 Use-after-free read at 0x00000000a891fb3a (in kfence-#1): bpf_sk_storage_get_tracing+0x2e/0x1b0 bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda bpf_trace_run2+0x4c/0xc0 tcp_rtx_synack+0xf9/0x100 reqsk_timer_handler+0xda/0x3d0 run_timer_softirq+0x292/0x8a0 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 intel_idle_irq+0x5a/0xa0 cpuidle_enter_state+0x94/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6 allocated by task 0 on cpu 9 at 260507.901592s: sk_prot_alloc+0x35/0x140 sk_clone_lock+0x1f/0x3f0 inet_csk_clone_lock+0x15/0x160 tcp_create_openreq_child+0x1f/0x410 tcp_v6_syn_recv_sock+0x1da/0x700 tcp_check_req+0x1fb/0x510 tcp_v6_rcv+0x98b/0x1420 ipv6_list_rcv+0x2258/0x26e0 napi_complete_done+0x5b1/0x2990 mlx5e_napi_poll+0x2ae/0x8d0 net_rx_action+0x13e/0x590 irq_exit_rcu+0xf5/0x320 common_interrupt+0x80/0x90 asm_common_interrupt+0x22/0x40 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb freed by task 0 on cpu 9 at 260507.927527s: rcu_core_si+0x4ff/0xf10 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb Fixes: 83fccfc3 ("inet: fix potential deadlock in reqsk_queue_unlink()") Reported-by:
Martin KaFai Lau <martin.lau@kernel.org> Closes: https://lore.kernel.org/netdev/eb6684d0-ffd9-4bdc-9196-33f690c25824@linux.dev/ Link: https://lore.kernel.org/netdev/b55e2ca0-42f2-4b7c-b445-6ffd87ca74a0@linux.dev/ [1] Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
-
Wang Hai authored
The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb in case of mapping fails, add dev_kfree_skb() to fix it. Fixes: 490cb412 ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by:
Wang Hai <wanghai38@huawei.com> Acked-by:
-
- 15 Oct, 2024 9 commits
-
-
Wang Hai authored
The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb() to fix it. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
-
Linus Torvalds authored
Merge tag 'trace-ringbuffer-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ring-buffer fixes from Steven Rostedt: - Fix ref counter of buffers assigned at boot up A tracing instance can be created from the kernel command line. If it maps to memory, it is considered permanent and should not be deleted, or bad things can happen. If it is not mapped to memory, then the user is fine to delete it via rmdir from the instances directory. But the ref counts assumed 0 was free to remove and greater than zero was not. But this was not the case. When an instance is created, it should have the reference of 1, and if it should not be removed, it must be greater than 1. The boot up code set normal instances with a ref count of 0, which could get removed if something accessed it and then released it. And memory mapped instances had a ref count of 1 which meant it could be deleted, and bad things happen. Keep normal instances ref count as 1, and set memory mapped instances ref count to 2. - Protect sub buffer size (order) updates from other modifications When a ring buffer is changing the size of its sub-buffers, no other operations should be performed on the ring buffer. That includes reading it. But the locking only grabbed the buffer->mutex that keeps some operations from touching the ring buffer. It also must hold the cpu_buffer->reader_lock as well when updates happen as other paths use that to do some operations on the ring buffer. * tag 'trace-ringbuffer-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Fix reader locking when changing the sub buffer order ring-buffer: Fix refcount setting of boot mapped buffers
-
git://evilpiepirate.org/bcachefsLinus Torvalds authored
Pull bcachefs fixes from Kent Overstreet: - New metadata version inode_has_child_snapshots This fixes bugs with handling of unlinked inodes + snapshots, in particular when an inode is reattached after taking a snapshot; deleted inodes now get correctly cleaned up across snapshots. - Disk accounting rewrite fixes - validation fixes for when a device has been removed - fix journal replay failing with "journal_reclaim_would_deadlock" - Some more small fixes for erasure coding + device removal - Assorted small syzbot fixes * tag 'bcachefs-2024-10-14' of git://evilpiepirate.org/bcachefs: (27 commits) bcachefs: Fix sysfs warning in fstests generic/730,731 bcachefs: Handle race between stripe reuse, invalidate_stripe_to_dev bcachefs: Fix kasan splat in new_stripe_alloc_buckets() bcachefs: Add missing validation for bch_stripe.csum_granularity_bits bcachefs: Fix missing bounds checks in bch2_alloc_read() bcachefs: fix uaf in bch2_dio_write_done() bcachefs: Improve check_snapshot_exists() bcachefs: Fix bkey_nocow_lock() bcachefs: Fix accounting replay flags bcachefs: Fix invalid shift in member_to_text() bcachefs: Fix bch2_have_enough_devs() for BCH_SB_MEMBER_INVALID bcachefs: __wait_for_freeing_inode: Switch to wait_bit_queue_entry bcachefs: Check if stuck in journal_res_get() closures: Add closure_wait_event_timeout() bcachefs: Fix state lock involved deadlock bcachefs: Fix NULL pointer dereference in bch2_opt_to_text bcachefs: Release transaction before wake up bcachefs: add check for btree id against max in try read node bcachefs: Disk accounting device validation fixes bcachefs: bch2_inode_or_descendents_is_open() ... -
Wang Hai authored
The rtsn_start_xmit() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb_any() to fix it. Fixes: b0d3969d ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN") Signed-off-by:
-
Wang Hai authored
The axienet_start_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb_any() to fix it. Fixes: 71791dc8 ("net: axienet: Check for DMA mapping errors") Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://patch.msgid.link/20241014143704.31938-1-wanghai38@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: prevent MPC handshake on port-based signal endpoints MPTCP connection requests toward a listening socket created by the in-kernel PM for a port based signal endpoint will never be accepted, they need to be explicitly rejected. - Patch 1: Explicitly reject such requests. A fix for >= v5.12. - Patch 2: Cover this case in the MPTCP selftests to avoid regressions. Signed-off-by:
-
Paolo Abeni authored
Explicitly verify that MPC connection attempts towards a port-based signal endpoint fail with a reset. Note that this new test is a bit different from the other ones, not using 'run_tests'. It is then needed to add the capture capability, and the picking the right port which have been extracted into three new helpers. The info about the capture can also be printed from a single point, which simplifies the exit paths in do_transfer(). The 'Fixes' tag here below is the same as the one from the previous commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID. Fixes: 1729cf18 ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Co-developed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Paolo Abeni authored
Syzkaller reported a lockdep splat: ============================================ WARNING: possible recursive locking detected 6.11.0-rc6-syzkaller-00019-g67784a74 #0 Not tainted -------------------------------------------- syz-executor364/5113 is trying to acquire lock: ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 but task is already holding lock: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-slock-AF_INET); lock(k-slock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by syz-executor364/5113: #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x153/0x1b10 net/mptcp/protocol.c:1806 #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg_fastopen+0x11f/0x530 net/mptcp/protocol.c:1727 #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x5f/0x1b80 net/ipv4/ip_output.c:470 #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1390 net/ipv4/ip_output.c:228 #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: local_lock_acquire include/linux/local_lock_internal.h:29 [inline] #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x33b/0x15b0 net/core/dev.c:6104 #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x230/0x5f0 net/ipv4/ip_input.c:232 #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 stack backtrace: CPU: 0 UID: 0 PID: 5113 Comm: syz-executor364 Not tainted 6.11.0-rc6-syzkaller-00019-g67784a74 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_deadlock kernel/locking/lockdep.c:3061 [inline] validate_chain+0x15d3/0x5900 kernel/locking/lockdep.c:3855 __lock_acquire+0x137a/0x2040 kernel/locking/lockdep.c:5142 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 mptcp_sk_clone_init+0x32/0x13c0 net/mptcp/protocol.c:3279 subflow_syn_recv_sock+0x931/0x1920 net/mptcp/subflow.c:874 tcp_check_req+0xfe4/0x1a20 net/ipv4/tcp_minisocks.c:853 tcp_v4_rcv+0x1c3e/0x37f0 net/ipv4/tcp_ipv4.c:2267 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x1763/0x3e90 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:235 ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:535 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6542 [inline] tcp_rcv_state_process+0x2c32/0x4570 net/ipv4/tcp_input.c:6729 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1934 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x214/0x350 net/core/sock.c:3004 release_sock+0x61/0x1f0 net/core/sock.c:3558 mptcp_sendmsg_fastopen+0x1ad/0x530 net/mptcp/protocol.c:1733 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1812 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f04fb13a6b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 01 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd651f42d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f04fb13a6b9 RDX: 0000000000000001 RSI: 0000000020000d00 RDI: 0000000000000004 RBP: 00007ffd651f4310 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000020000080 R11: 0000000000000246 R12: 00000000000f4240 R13: 00007f04fb187449 R14: 00007ffd651f42f4 R15: 00007ffd651f4300 </TASK> As noted by Cong Wang, the splat is false positive, but the code path leading to the report is an unexpected one: a client is attempting an MPC handshake towards the in-kernel listener created by the in-kernel PM for a port based signal endpoint. Such connection will be never accepted; many of them can make the listener queue full and preventing the creation of MPJ subflow via such listener - its intended role. Explicitly detect this scenario at initial-syn time and drop the incoming MPC request. Fixes: 1729cf18 ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Reported-by: syzbot+f4aacdfef2c6a6529c3e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f4aacdfef2c6a6529c3e Cc: Cong Wang <cong.wang@bytedance.com> Signed-off-by:
-
Li RongQing authored
pnetid of pi (not newly allocated pe) should be compared Fixes: e888a2e8 ("net/smc: introduce list of pnetids for Ethernet devices") Reviewed-by:
D. Wythe <alibuda@linux.alibaba.com> Reviewed-by:
Wen Gu <guwen@linux.alibaba.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Reviewed-by:
Gerd Bayer <gbayer@linux.ibm.com> Link: https://patch.msgid.link/20241014115321.33234-1-lirongqing@baidu.comSigned-off-by:
-
