In the rockchip_thermal.c driver we now get the resets with
a devm_reset_control_array_get() function, so remove
the reset-names property as it is no longer needed.
Although no longer required in rockchip-thermal.yaml
sort tsadc-apb as first item.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210930110517.14323-4-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

On the Quartz64 Model A, the I2S1 TDM controller is connected
to the rk817 codec in I2S mode. Enabling it and adding the
necessary simple-sound-card and codec nodes allows for analog
audio output on the PINE64 Quartz64 Model A SBC.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211016105354.116513-5-frattaroli.nicolas@gmail.com
[some property sorting]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This adds the necessary device tree node on rk3566 and rk3568
to enable the I2S1 TDM audio controller.

I2S0 has not been added, as it is connected to HDMI and there is
no way to test that it's working without a functioning video
clock (read: VOP2 driver).
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211016105354.116513-4-frattaroli.nicolas@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Currently all gpio nodenames are sort of identical to there label.
Nodenames should be of a generic type, so change them all.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20211007144019.7461-3-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

A new 'chassis-type' root node property has recently been approved for
the device-tree specification, in order to provide a simple way for
userspace to detect the device form factor and adjust their behavior
accordingly.

This patch fills in this property for end-user devices (such as laptops,
smartphones and tablets) based on Rockchip ARM64 processors.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Link: https://lore.kernel.org/r/20211016102025.23346-5-arnaud.ferraris@collabora.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add the core io-domain node for rk3368.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210925090405.2601792-3-heiko@sntech.de

Add the compatible for the pmu mfd on rk3368.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210925090405.2601792-1-heiko@sntech.de

Add the necessary nodes to enable the spdif output on the
RK3566-Quartz-A board.
Co-developed-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211015111303.1365328-2-frattaroli.nicolas@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

This adds the spdif node to the rk356x device tree.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211015111303.1365328-1-frattaroli.nicolas@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add the pwm controller nodes to the core rk3568 dtsi.
Signed-off-by: Liang Chen <cl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210726090355.1548483-2-heiko@sntech.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Other DTS files that include the dtsi will want to to add children
to the i2c buses from the i2c-mus. Without a label they would have to
specify the full path.
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
[add phandles for first mux as well]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210922230429.2162535-3-heiko@sntech.de

This is not strictly needed, as 3.3V is the default,
but good to have for descriptive purposes nevertheless.
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
[fixed ordering]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210922230429.2162535-2-heiko@sntech.de

LDO_REG7 is used for generating VCC_18.
LDO_REG4 is not connected to anything - delete it.
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210922230429.2162535-1-heiko@sntech.de

Align the name of operating-points node to dtschema to fix warnings
like:

  opp-table0: $nodename:0: 'opp-table0' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210819182311.223443-2-krzysztof.kozlowski@canonical.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Enable the isp and csi phy on px30-evb and connect it to the board's
ov5695 camera.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210830141318.66744-2-heiko@sntech.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add the rkisp1 node and iommu for the px30 soc.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210830141318.66744-1-heiko@sntech.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Per Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt.

This IP block can be used for sampling the PC of any given CPU, which is
useful in certain panic scenarios where you can't get the CPU to stop
cleanly (e.g., hard lockup).
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20210908111337.v2.3.Ibc87b4785709543c998cc852c1edaeb7a08edf5c@changeidSigned-off-by: Heiko Stuebner <heiko@sntech.de>

When writing a battery driver, I noticed that the USB voltage was ~3.7V
while running off of battery on a mainline kernel. After consulting the
schematics for the Odroid Go Advance, it appears that the BOOST
regulator is involved in the process of powering the USB host. Power
for the USB host goes from the vccsys regulator into the PMIC, then out
from the PMIC BOOST regulator into the FC9516A (which is controlled by
GPIO), which then feeds power into the USB host. I named the regulator
usb_midu because on the datasheet the pin is described as "MIDU/BOOST -
middle point of USB power supply / boost output". Making these changes
solved the USB power issue on battery and I'm now reading approximately
5v.

Note that on my board at least there is a difference in time from the
USB PHY probing and the regulators being powered on. This causes the
USB port to be undervolted for a few seconds during boot up. The
solutions to this problem are either 1) to add the proper phy-supply
on the host port, or to 2) add regulator-boot-on to the regulator. I
chose to add regulator-boot-on because there is an issue with the phy
clk that causes a warning when booting (see v1 of this patch series).
Basically the clock usb480m is a child of the usb480m_phy clock (used
by the USB PHY) and also a critical clock. Setting the phy-supply
causes this driver to be EPROBE_DEFERed until the regulator is ready,
however upon unregistering the driver to be probed later the system
cannot remove the usb480m_phy clock due to a child being marked
critical.

Changes since v2:
 - Added notes about clk problem and regulator voltage at boot.
 - Added regulator-boot-on as a workaround for the voltage at boot.
 - Removed note about fixed regulator warning, as that has been
   fixed upstream.

Changes since v1:
 - Removed phy-supply, as this generated a warning in dmesg.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20210916190938.6175-1-macroalpha82@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Warning (pci_device_reg): /pcie@f8000000/pcie@0,0:reg: PCI reg address is not configuration space
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Link: https://lore.kernel.org/r/20210918164153.207146-1-tomm.merciai@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add the SARADC to the device tree of the RK3568 EVB1.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20210823110716.10038-1-michael.riesch@wolfvision.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>

As can be seen in RK3328's TRM the register range for the GPU is
0xff300000 to 0xff330000.
It would (and does in vendor kernel) overlap with the registers of
the HEVC encoder (node/driver do not exist yet in upstream kernel).
See already existing h265e_mmu node.

Fixes: 752fbc0c ("arm64: dts: rockchip: add rk3328 mali gpu node")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210623115926.164861-1-knaerzche@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Commit 53a05c8f6e8e ("arm64: dts: rockchip: remove interrupt-names from iommu nodes")
intended to remove the interrupt-names property for mmu nodes, but it
also removed it for the vpu node in rk3399.dtsi. That makes the driver
fail probing currently.
Fix this by re-adding the property for this node.

Fixes: 53a05c8f6e8e ("arm64: dts: rockchip: remove interrupt-names from iommu nodes")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210822115755.3171937-1-knaerzche@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

This commit fixes the error messages

  rockchip_clk_register_muxgrf: regmap not available
  rockchip_clk_register_branches: failed to register clock clk_ddr1x: -524

during boot by providing the missing rockchip,grf property.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210823123911.12095-2-michael.riesch@wolfvision.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>

It's convenient to get nice names for GPIOs. In particular, Chrome OS
tooling looks for "AP_FLASH_WP" and "AP_FLASH_WP_L". The rest are
provided for convenience.

Gru-Bob and Gru-Kevin share the gru-chromebook.dtsi, and for the most
part they share pin meanings. I omitted a few areas where components
were available only on one or the other.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210820133829.1.Ica46f428de8c3beb600760dbcd63cf879ec24baf@changeidSigned-off-by: Heiko Stuebner <heiko@sntech.de>

This enables the Rockchip Serial Flash Controller for the Odroid Go
Advance. Note that while the attached SPI NOR flash and the controller
both support quad read mode, only 2 of the required 4 pins are present.
The rx bus width is set to 2 for this reason, and tx bus width is set
to 1 for compatibility reasons.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20210812134639.31586-2-jon.lin@rock-chips.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add a devicetree entry for the Rockchip SFC for the RK3308 SOC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20210812134639.31586-1-jon.lin@rock-chips.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add a devicetree entry for the Rockchip SFC for the PX30 SOC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20210812134546.31340-4-jon.lin@rock-chips.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add the thermal nodes for the Quartz64 Model A.
The Model A supports a single speed gpio fan.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210728180034.717953-9-pgwipeout@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add the thermal and tsadc nodes to the rk3568 device tree.
There are two sensors, one for the cpu, one for the gpu.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210728180034.717953-6-pgwipeout@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

The rk356x added a debounce clock to the gpio devices. This clock is
necessary for the new v2 gpio driver to bind.
Add the clocks to the rk356x device tree.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210728180034.717953-4-pgwipeout@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Since the EMMC pins can be used for other functions as well, we need to
configure the pinctrl.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20210805120107.27007-8-michael.riesch@wolfvision.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add the SD card reader to the device tree of the RK3568 EVB1.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20210805120107.27007-7-michael.riesch@wolfvision.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add the regulators of the RK809 PMIC to the device tree of the
RK3568 EVB1.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20210805120107.27007-6-michael.riesch@wolfvision.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Enable the PMU IO domains in the device tree for the RK3568 EVB1.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20210805120107.27007-5-michael.riesch@wolfvision.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Enable the PMU IO domains for the RK3566 and the RK3568.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20210805120107.27007-4-michael.riesch@wolfvision.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>

The rockpro64 had a fan node since
commit 5882d65c ("arm64: dts: rockchip: Add PWM fan for RockPro64")
however it was never tied into the thermal driver for automatic control.

Add the links to the thermal node to permit the kernel to handle this
automatically.
Borrowed from the (rk3399-khadas-edge.dtsi).
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210730151727.729822-1-pgwipeout@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Some chargers try to put the charged device into device data
role. Before this commit this condition caused the tcpm state machine to
issue a hard reset due to a capability missmatch.
Signed-off-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20210805220426.2693062-1-strit@manjaro.orgSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Dumo is another variant of Scarlet, also known as the ASUS Chromebook
Tablet CT100. This is almost the same as Scarlet-Innolux, but uses a
board-specific calibration variant for the WiFi module.

Add a new device tree for it.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210812094753.2359087-3-wenst@chromium.orgSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Dumo is another variant of Scarlet, also known as the ASUS Chromebook
Tablet CT100. This is almost the same as Scarlet-Innolux, but uses a
specific calibration variant for the WiFi module.

Add an entry for the board compatibles.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210812094753.2359087-2-wenst@chromium.orgSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20210729093913.8917-3-michael.riesch@wolfvision.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>