- 11 Jun, 2019 25 commits
-
-
John David Anglin authored
commit 63923d2c upstream. We only support I/O to kernel space. Using %sr1 to load the coherence index may be racy unless interrupts are disabled. This patch changes the code used to load the coherence index to use implicit space register selection. This saves one instruction and eliminates the race. Tested on rp3440, c8000 and c3750. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eugeniy Paltsev authored
commit a8c715b4 upstream. As of today if userspace process tries to access a kernel virtual addres (0x7000_0000 to 0x7ffff_ffff) such that a legit kernel mapping already exists, that process hangs instead of being killed with SIGSEGV Fix that by ensuring that do_page_fault() handles kenrel vaddr only if in kernel mode. And given this, we can also simplify the code a bit. Now a vmalloc fault implies kernel mode so its failure (for some reason) can reuse the @no_context label and we can remove @bad_area_nosemaphore. Reproduce user test for original problem: ------------------------>8----------------- #include <stdlib.h> #include <stdint.h> int main(int argc, char *argv[]) { volatile uint32_t temp; temp = *(uint32_t *)(0x70000000); } ------------------------>8----------------- Cc: <stable@vger.kernel.org> Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Jann Horn authored
commit 8438846c upstream. This fixes multiple things in the habanalabs debugfs code, in particular: - mmu_write() was unnecessarily verbose, copying around between multiple buffers - mmu_write() could write a user-specified, unbounded amount of userspace memory into a kernel buffer (out-of-bounds write) - multiple debugfs read handlers ignored the user-supplied count, potentially corrupting out-of-bounds userspace data - hl_device_read() was unnecessarily verbose - hl_device_write() could read uninitialized stack memory - multiple debugfs read handlers copied terminating null characters to userspace Signed-off-by:
Jann Horn <jannh@google.com> Reviewed-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Linus Torvalds authored
commit 66be4e66 upstream. Herbert Xu pointed out that commit bb73c52b ("rcu: Don't disable preemption for Tiny and Tree RCU readers") was incorrect in making the preempt_disable/enable() be conditional on CONFIG_PREEMPT_COUNT. If CONFIG_PREEMPT_COUNT isn't enabled, the preemption enable/disable is a no-op, but still is a compiler barrier. And RCU locking still _needs_ that compiler barrier. It is simply fundamentally not true that RCU locking would be a complete no-op: we still need to guarantee (for example) that things that can trap and cause preemption cannot migrate into the RCU locked region. The way we do that is by making it a barrier. See for example commit 386afc91 ("spinlocks and preemption points need to be at least compiler barriers") from back in 2013 that had similar issues with spinlocks that become no-ops on UP: they must still constrain the compiler from moving other operations into the critical region. Now, it is true that a lot of RCU operations already use READ_ONCE() and WRITE_ONCE() (which in practice likely would never be re-ordered wrt anything remotely interesting), but it is also true that that is not globally the case, and that it's not even necessarily always possible (ie bitfields etc). Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Fixes: bb73c52b ("rcu: Don't disable preemption for Tiny and Tree RCU readers") Cc: stable@kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit e52972c1 ] Commit 38030d7c ("net/tls: avoid NULL-deref on resync during device removal") tried to fix a potential NULL-dereference by taking the context rwsem. Unfortunately the RX resync may get called from soft IRQ, so we can't use the rwsem to protect from the device disappearing. Because we are guaranteed there can be only one resync at a time (it's called from strparser) use a bit to indicate resync is busy and make device removal wait for the bit to get cleared. Note that there is a leftover "flags" field in struct tls_context already. Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Erez Alfasi authored
[ Upstream commit 135dd959 ] Querying EEPROM high pages data for SFP module is currently not supported by our driver but is still tried, resulting in invalid FW queries. Set the EEPROM ethtool data length to 256 for SFP module to limit the reading for page 0 only and prevent invalid FW queries. Fixes: 7202da8b ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by:
Erez Alfasi <ereza@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 7fcd1e03 ] e is the counter used to save the location of a dump when an skb is filled. Once the walk of the table is complete, mr_table_dump needs to return without resetting that index to 0. Dump of a specific table is looping because of the reset because there is no way to indicate the walk of the table is done. Move the reset to the caller so the dump of each table starts at 0, but the loop counter is maintained if a dump fills an skb. Fixes: e1cedae1 ("ipmr: Refactor mr_rtm_dumproute") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Matteo Croce authored
[ Upstream commit 25426043 ] When a matchall classifier is added, there is a small time interval in which tp->root is NULL. If we receive a packet in this small time slice a NULL pointer dereference will happen, leading to a kernel panic: # tc qdisc replace dev eth0 ingress # tc filter add dev eth0 parent ffff: matchall action gact drop Unable to handle kernel NULL pointer dereference at virtual address 0000000000000034 Mem abort info: ESR = 0x96000005 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000a623d530 [0000000000000034] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000005 [#1] SMP Modules linked in: cls_matchall sch_ingress nls_iso8859_1 nls_cp437 vfat fat m25p80 spi_nor mtd xhci_plat_hcd xhci_hcd phy_generic sfp mdio_i2c usbcore i2c_mv64xxx marvell10g mvpp2 usb_common spi_orion mvmdio i2c_core sbsa_gwdt phylink ip_tables x_tables autofs4 Process ksoftirqd/0 (pid: 9, stack limit = 0x0000000009de7d62) CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 5.1.0-rc6 #21 Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : mall_classify+0x28/0x78 [cls_matchall] lr : tcf_classify+0x78/0x138 sp : ffffff80109db9d0 x29: ffffff80109db9d0 x28: ffffffc426058800 x27: 0000000000000000 x26: ffffffc425b0dd00 x25: 0000000020000000 x24: 0000000000000000 x23: ffffff80109dbac0 x22: 0000000000000001 x21: ffffffc428ab5100 x20: ffffffc425b0dd00 x19: ffffff80109dbac0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: ffffffbf108ad288 x12: dead000000000200 x11: 00000000f0000000 x10: 0000000000000001 x9 : ffffffbf1089a220 x8 : 0000000000000001 x7 : ffffffbebffaa950 x6 : 0000000000000000 x5 : 000000442d6ba000 x4 : 0000000000000000 x3 : ffffff8008735ad8 x2 : ffffff80109dbac0 x1 : ffffffc425b0dd00 x0 : ffffff8010592078 Call trace: mall_classify+0x28/0x78 [cls_matchall] tcf_classify+0x78/0x138 __netif_receive_skb_core+0x29c/0xa20 __netif_receive_skb_one_core+0x34/0x60 __netif_receive_skb+0x28/0x78 netif_receive_skb_internal+0x2c/0xc0 napi_gro_receive+0x1a0/0x1d8 mvpp2_poll+0x928/0xb18 [mvpp2] net_rx_action+0x108/0x378 __do_softirq+0x128/0x320 run_ksoftirqd+0x44/0x60 smpboot_thread_fn+0x168/0x1b0 kthread+0x12c/0x130 ret_from_fork+0x10/0x1c Code: aa0203f3 aa1e03e0 d503201f f9400684 (b9403480) ---[ end trace fc71e2ef7b8ab5a5 ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x002,00002000 Memory Limit: none Rebooting in 1 seconds.. Fix this by adding a NULL check in mall_classify(). Fixes: ed76f5ed ("net: sched: protect filter_chain list with filter_chain_lock mutex") Signed-off-by:
Matteo Croce <mcroce@redhat.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 4b2a2bfe ] Commit cd9ff4de changed the key for IFF_POINTOPOINT devices to INADDR_ANY but neigh_xmit which is used for MPLS encapsulations was not updated to use the altered key. The result is that every packet Tx does a lookup on the gateway address which does not find an entry, a new one is created only to find the existing one in the table right before the insert since arp_constructor was updated to reset the primary key. This is seen in the allocs and destroys counters: ip -s -4 ntable show | head -10 | grep alloc which increase for each packet showing the unnecessary overhread. Fix by having neigh_xmit use __ipv4_neigh_lookup_noref for NEIGH_ARP_TABLE. Fixes: cd9ff4de ("ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY") Reported-by:
Alan Maguire <alan.maguire@oracle.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 64c6f4bb ] Ian and Alan both reported seeing overflows after upgrades to 5.x kernels: neighbour: arp_cache: neighbor table overflow! Alan's mpls script helped get to the bottom of this bug. When a new entry is created the gc_entries counter is bumped in neigh_alloc to check if a new one is allowed to be created. ___neigh_create then searches for an existing entry before inserting the just allocated one. If an entry already exists, the new one is dropped in favor of the existing one. In this case the cleanup path needs to drop the gc_entries counter. There is no memory leak, only a counter leak. Fixes: 58956317 ("neighbor: Improve garbage collection") Reported-by:
Ian Kumlien <ian.kumlien@gmail.com> Reported-by:
-
Nikita Danilov authored
[ Upstream commit 930b9a05 ] WoL magic packet configuration sometimes does not work due to couple of leakages found. Mainly there was a regression introduced during readx_poll refactoring. Next, fw request waiting time was too small. Sometimes that caused sleep proxy config function to return with an error and to skip WoL configuration. At last, WoL data were passed to FW from not clean buffer. That could cause FW to accept garbage as a random configuration data. Fixes: 6a7f2277 ("net: aquantia: replace AQ_HW_WAIT_FOR with readx_poll_timeout_atomic") Signed-off-by:
Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Olivier Matz authored
[ Upstream commit b9aa52c4 ] The following code returns EFAULT (Bad address): s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6); setsockopt(s, SOL_IPV6, IPV6_HDRINCL, 1); sendto(ipv6_icmp6_packet, addr); /* returns -1, errno = EFAULT */ The IPv4 equivalent code works. A workaround is to use IPPROTO_RAW instead of IPPROTO_ICMPV6. The failure happens because 2 bytes are eaten from the msghdr by rawv6_probe_proto_opt() starting from commit 19e3c66b ("ipv6 equivalent of "ipv4: Avoid reading user iov twice after raw_probe_proto_opt""), but at that time it was not a problem because IPV6_HDRINCL was not yet introduced. Only eat these 2 bytes if hdrincl == 0. Fixes: 715f504b ("ipv6: add IPV6_HDRINCL option for raw sockets") Signed-off-by:
Olivier Matz <olivier.matz@6wind.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Olivier Matz authored
[ Upstream commit 59e3e4b5 ] As it was done in commit 8f659a03 ("net: ipv4: fix for a race condition in raw_sendmsg") and commit 20b50d79 ("net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()") for ipv4, copy the value of inet->hdrincl in a local variable, to avoid introducing a race condition in the next commit. Signed-off-by:
-
Tim Beale authored
[ Upstream commit 82ba25c6 ] By default, packets received in another VRF should not be passed to an unbound socket in the default VRF. This patch updates the IPv4 UDP multicast logic to match the unicast VRF logic (in compute_score()), as well as the IPv6 mcast logic (in __udp_v6_is_mcast_sock()). The particular case I noticed was DHCP discover packets going to the 255.255.255.255 address, which are handled by __udp4_lib_mcast_deliver(). The previous code meant that running multiple different DHCP server or relay agent instances across VRFs did not work correctly - any server/relay agent in the default VRF received DHCP discover packets for all other VRFs. Fixes: 6da5b0f0 ("net: ensure unbound datagram socket to be chosen when not in a VRF") Signed-off-by:
Tim Beale <timbeale@catalyst.net.nz> Reviewed-by:
-
Hangbin Liu authored
[ Upstream commit 4970b42d ] This reverts commit e9919a24. Nathan reported the new behaviour breaks Android, as Android just add new rules and delete old ones. If we return 0 without adding dup rules, Android will remove the new added rules and causing system to soft-reboot. Fixes: e9919a24 ("fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied") Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Reported-by:
Yaro Slav <yaro330@gmail.com> Reported-by:
Maciej Żenczykowski <zenczykowski@gmail.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
-
Paolo Abeni authored
[ Upstream commit 720f1de4 ] Currently, the process issuing a "start" command on the pktgen procfs interface, acquires the pktgen thread lock and never release it, until all pktgen threads are completed. The above can blocks indefinitely any other pktgen command and any (even unrelated) netdevice removal - as the pktgen netdev notifier acquires the same lock. The issue is demonstrated by the following script, reported by Matteo: ip -b - <<'EOF' link add type dummy link add type veth link set dummy0 up EOF modprobe pktgen echo reset >/proc/net/pktgen/pgctrl { echo rem_device_all echo add_device dummy0 } >/proc/net/pktgen/kpktgend_0 echo count 0 >/proc/net/pktgen/dummy0 echo start >/proc/net/pktgen/pgctrl & sleep 1 rmmod veth Fix the above releasing the thread lock around the sleep call. Additionally we must prevent racing with forcefull rmmod - as the thread lock no more protects from them. Instead, acquire a self-reference before waiting for any thread. As a side effect, running rmmod pktgen while some thread is running now fails with "module in use" error, before this patch such command hanged indefinitely. Note: the issue predates the commit reported in the fixes tag, but this fix can't be applied before the mentioned commit. v1 -> v2: - no need to check for thread existence after flipping the lock, pktgen threads are freed only at net exit time - Fixes: 6146e6a4 ("[PKTGEN]: Removes thread_{un,}lock() macros.") Reported-and-tested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit afa0925c ] Rollover used to use a complex RCU mechanism for assignment, which had a race condition. The below patch fixed the bug and greatly simplified the logic. The feature depends on fanout, but the state is private to the socket. Fanout_release returns f only when the last member leaves and the fanout struct is to be freed. Destroy rollover unconditionally, regardless of fanout state. Fixes: 57f015f5 ("packet: fix crash in fanout_demux_rollover()") Reported-by:
syzbot <syzkaller@googlegroups.com> Diagnosed-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Russell King authored
[ Upstream commit 28e74a7c ] Some SFP modules do not like reads longer than 16 bytes, so read the EEPROM in chunks of 16 bytes at a time. This behaviour is not specified in the SFP MSAs, which specifies: "The serial interface uses the 2-wire serial CMOS E2PROM protocol defined for the ATMEL AT24C01A/02/04 family of components." and "As long as the SFP+ receives an acknowledge, it shall serially clock out sequential data words. The sequence is terminated when the host responds with a NACK and a STOP instead of an acknowledge." We must avoid breaking a read across a 16-bit quantity in the diagnostic page, thankfully all 16-bit quantities in that page are naturally aligned. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Zhu Yanjun authored
[ Upstream commit 85cb9287 ] When the following tests last for several hours, the problem will occur. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M -T 30 The following will occur. " Starting up.... tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 " >From vmcore, we can find that clean_list is NULL. >From the source code, rds_mr_flushd calls rds_ib_mr_pool_flush_worker. Then rds_ib_mr_pool_flush_worker calls " rds_ib_flush_mr_pool(pool, 0, NULL); " Then in function " int rds_ib_flush_mr_pool(struct rds_ib_mr_pool *pool, int free_all, struct rds_ib_mr **ibmr_ret) " ibmr_ret is NULL. In the source code, " ... list_to_llist_nodes(pool, &unmap_list, &clean_nodes, &clean_tail); if (ibmr_ret) *ibmr_ret = llist_entry(clean_nodes, struct rds_ib_mr, llnode); /* more than one entry in llist nodes */ if (clean_nodes->next) llist_add_batch(clean_nodes->next, clean_tail, &pool->clean_list); ... " When ibmr_ret is NULL, llist_entry is not executed. clean_nodes->next instead of clean_nodes is added in clean_list. So clean_nodes is discarded. It can not be used again. The workqueue is executed periodically. So more and more clean_nodes are discarded. Finally the clean_list is NULL. Then this problem will occur. Fixes: 1bc144b6 ("net, rds, Replace xlist in net/rds/xlist.h with llist") Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit d37acd5a ] Use a safe strscpy call to copy the ethtool stat strings into the relevant buffers, instead of a memcpy that will be accessing out-of-bound data. Fixes: 118d6298 ("net: mvpp2: add ethtool GOP statistics") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Ivan Khoronzhuk authored
[ Upstream commit 09faf5a7 ] Fix ability to set RX descriptor number, the reason - initially "tx_max_pending" was set incorrectly, but the issue appears after adding sanity check, so fix is for "sanity" patch. Fixes: 37e2d99b ("ethtool: Ensure new ring parameters are within bounds during SRINGPARAM") Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit b7999b07 ] In Jianlin's testing, netperf was broken with 'Connection reset by peer', as the cookie check failed in rt6_check() and ip6_dst_check() always returned NULL. It's caused by Commit 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes"), where the cookie can be got only when 'c1'(see below) for setting dst_cookie whereas rt6_check() is called when !'c1' for checking dst_cookie, as we can see in ip6_dst_check(). Since in ip6_dst_check() both rt6_dst_from_check() (c1) and rt6_check() (!c1) will check the 'from' cookie, this patch is to remove the c1 check in rt6_get_cookie(), so that the dst_cookie can always be set properly. c1: (rt->rt6i_flags & RTF_PCPU || unlikely(!list_empty(&rt->rt6i_uncached))) Fixes: 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 0a90478b ] With the topo: h1 ---| rp1 | | route rp3 |--- h3 (192.168.200.1) h2 ---| rp2 | If rp1 bc_forwarding is set while rp2 bc_forwarding is not, after doing "ping 192.168.200.255" on h1, then ping 192.168.200.255 on h2, and the packets can still be forwared. This issue was caused by the input route cache. It should only do the cache for either bc forwarding or local delivery. Otherwise, local delivery can use the route cache for bc forwarding of other interfaces. This patch is to fix it by not doing cache for local delivery if all.bc_forwarding is enabled. Note that we don't fix it by checking route cache local flag after rt_cache_valid() in "local_input:" and "ip_mkroute_input", as the common route code shouldn't be touched for bc_forwarding. Fixes: 5cbf777c ("route: add support for directed broadcast forwarding") Reported-by:
-
Neil Horman authored
[ Upstream commit 0a8dd9f6 ] syzbot found the following leak in sctp_process_init BUG: memory leak unreferenced object 0xffff88810ef68400 (size 1024): comm "syz-executor273", pid 7046, jiffies 4294945598 (age 28.770s) hex dump (first 32 bytes): 1d de 28 8d de 0b 1b e3 b5 c2 f9 68 fd 1a 97 25 ..(........h...% 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a02cebbd>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<00000000a02cebbd>] slab_post_alloc_hook mm/slab.h:439 [inline] [<00000000a02cebbd>] slab_alloc mm/slab.c:3326 [inline] [<00000000a02cebbd>] __do_kmalloc mm/slab.c:3658 [inline] [<00000000a02cebbd>] __kmalloc_track_caller+0x15d/0x2c0 mm/slab.c:3675 [<000000009e6245e6>] kmemdup+0x27/0x60 mm/util.c:119 [<00000000dfdc5d2d>] kmemdup include/linux/string.h:432 [inline] [<00000000dfdc5d2d>] sctp_process_init+0xa7e/0xc20 net/sctp/sm_make_chunk.c:2437 [<00000000b58b62f8>] sctp_cmd_process_init net/sctp/sm_sideeffect.c:682 [inline] [<00000000b58b62f8>] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1384 [inline] [<00000000b58b62f8>] sctp_side_effects net/sctp/sm_sideeffect.c:1194 [inline] [<00000000b58b62f8>] sctp_do_sm+0xbdc/0x1d60 net/sctp/sm_sideeffect.c:1165 [<0000000044e11f96>] sctp_assoc_bh_rcv+0x13c/0x200 net/sctp/associola.c:1074 [<00000000ec43804d>] sctp_inq_push+0x7f/0xb0 net/sctp/inqueue.c:95 [<00000000726aa954>] sctp_backlog_rcv+0x5e/0x2a0 net/sctp/input.c:354 [<00000000d9e249a8>] sk_backlog_rcv include/net/sock.h:950 [inline] [<00000000d9e249a8>] __release_sock+0xab/0x110 net/core/sock.c:2418 [<00000000acae44fa>] release_sock+0x37/0xd0 net/core/sock.c:2934 [<00000000963cc9ae>] sctp_sendmsg+0x2c0/0x990 net/sctp/socket.c:2122 [<00000000a7fc7565>] inet_sendmsg+0x64/0x120 net/ipv4/af_inet.c:802 [<00000000b732cbd3>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000b732cbd3>] sock_sendmsg+0x54/0x70 net/socket.c:671 [<00000000274c57ab>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2292 [<000000008252aedb>] __sys_sendmsg+0x80/0xf0 net/socket.c:2330 [<00000000f7bf23d1>] __do_sys_sendmsg net/socket.c:2339 [inline] [<00000000f7bf23d1>] __se_sys_sendmsg net/socket.c:2337 [inline] [<00000000f7bf23d1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2337 [<00000000a8b4131f>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:3 The problem was that the peer.cookie value points to an skb allocated area on the first pass through this function, at which point it is overwritten with a heap allocated value, but in certain cases, where a COOKIE_ECHO chunk is included in the packet, a second pass through sctp_process_init is made, where the cookie value is re-allocated, leaking the first allocation. Fix is to always allocate the cookie value, and free it when we are done using it. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Vivien Didelot authored
[ Upstream commit 0ee4e769 ] ethtool_get_regs() allocates a buffer of size ops->get_regs_len(), and pass it to the kernel driver via ops->get_regs() for filling. There is no restriction about what the kernel drivers can or cannot do with the open ethtool_regs structure. They usually set regs->version and ignore regs->len or set it to the same size as ops->get_regs_len(). But if userspace allocates a smaller buffer for the registers dump, we would cause a userspace buffer overflow in the final copy_to_user() call, which uses the regs.len value potentially reset by the driver. To fix this, make this case obvious and store regs.len before calling ops->get_regs(), to only copy as much data as requested by userspace, up to the value returned by ops->get_regs_len(). While at it, remove the redundant check for non-null regbuf. Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
- 09 Jun, 2019 15 commits
-
-
Greg Kroah-Hartman authored
-
Nadav Amit authored
[ Upstream commit 7298e24f ] Set the page as executable after allocation. This patch is a preparatory patch for a following patch that makes module allocated pages non-executable. While at it, do some small cleanup of what appears to be unnecessary masking. Signed-off-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-11-namit@vmware.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Greg Kroah-Hartman authored
This reverts commit 392bef70. It seems to cause lots of problems when using the gold linker, and no one really needs this at the moment, so just revert it from the stable trees. Cc: Sami Tolvanen <samitolvanen@google.com> Reported-by:
Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by:
Alec Ari <neotheuser@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Noralf Trønnes authored
commit 23e35c0e upstream. The logic for freeing an imported buffer with a virtual address is broken. It will free the buffer instead of unmapping the dma buf. Fix by reversing the if ladder and first check if the buffer is imported. Fixes: b9068cde ("drm/cma-helper: Add DRM_GEM_CMA_VMAP_DRIVER_OPS") Cc: stable@vger.kernel.org Reported-by:
"Li, Tingqian" <tingqian.li@intel.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190426124753.53722-1-noralf@tronnes.orgSigned-off-by:
-
Daniel Vetter authored
commit 204f640d upstream. If userspace doesn't enable universal planes, then we automatically add the primary and cursor planes. But for universal userspace there's no such check (and maybe we only want to give the lessee one plane, maybe not even the primary one), hence we need to check for the implied plane. v2: don't forget setcrtc ioctl. v3: Still allow disabling of the crtc in SETCRTC. Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-6-daniel.vetter@ffwll.chSigned-off-by:
-
Vicente Bergas authored
commit b8f9d7f3 upstream. As explained by Robin Murphy: > the IOMMU shutdown disables paging, so if the VOP is still > scanning out then that will result in whatever IOVAs it was using now going > straight out onto the bus as physical addresses. We had a more radical approach before in commit 7f3ef5de ("drm/rockchip: Allow driver to be shutdown on reboot/kexec") but that resulted in new warnings and oopses on shutdown on rk3399 chromeos devices. So second try is resurrecting Vicentes shutdown change which should achieve the same result but in a less drastic way. Fixes: 63238173 ("Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"") Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Brian Norris <briannorris@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org Suggested-by:
JeffyChen <jeffy.chen@rock-chips.com> Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Vicente Bergas <vicencb@gmail.com> [adapted commit message to explain the history] Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Brian Norris <briannorris@chromium.org> Tested-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190402113753.10118-1-heiko@sntech.deSigned-off-by:
-
Deepak Rawat authored
commit c8f00568 upstream. Plane property "FB_DAMAGE_CLIPS" can only be used by atomic aware user-space, so no point exposing it otherwise. Cc: <stable@vger.kernel.org> Signed-off-by:
Deepak Rawat <drawat@vmware.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: d3b21767 ("drm: Add a new plane property to send damage during plane update") Link: https://patchwork.freedesktop.org/patch/msgid/20190415172814.9840-1-drawat@vmware.comSigned-off-by:
-
Daniel Vetter authored
commit 36e4523a upstream. We need this to make sure lessees can only connect their plane/connectors to crtc objects they own. And note that this is irrespective of whether the lessor is atomic or not, lessor cannot prevent lessees from enabling atomic. Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Noralf Trønnes authored
commit 6e3f17ee upstream. Hotplug can happen while drm_fbdev_generic_setup() is running so move drm_client_add() call after setup is done to avoid drm_fbdev_client_hotplug() running in two threads at the same time. Fixes: 9060d7f4 ("drm/fb-helper: Finish the generic fbdev emulation") Cc: stable@vger.kernel.org Reported-by:
-
Philipp Zabel authored
commit 137caa70 upstream. The current buffer check halves the frame rate on non-plus i.MX6Q, as the IDMAC current buffer pointer is not yet updated when ipu_plane_atomic_update_pending is called from the EOF irq handler. Fixes: 70e8a0c7 ("drm/imx: ipuv3-plane: add function to query atomic update status") Tested-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by:
-
Jernej Skrabec authored
commit 831adffb upstream. Vendor provided documentation says that EMP bits should be set to 3 for pixel clocks greater than 148.5 MHz. Fix that. Cc: stable@vger.kernel.org # 4.17+ Fixes: 4f86e817 ("drm/sun4i: Add support for H3 HDMI PHY variant") Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190514204337.11068-3-jernej.skrabec@siol.netSigned-off-by:
-
Jernej Skrabec authored
commit 8a943c60 upstream. Current code initializes HDMI PHY clock driver before reset line is deasserted and clocks enabled. Because of that, initial readout of clock divider is incorrect (0 instead of 2). This causes any clock rate with divider 1 (register value 0) to be set incorrectly. Fix this by moving initialization of HDMI PHY clock driver after reset line is deasserted and clocks enabled. Cc: stable@vger.kernel.org # 4.17+ Fixes: 4f86e817 ("drm/sun4i: Add support for H3 HDMI PHY variant") Signed-off-by:
-
Thomas Hellstrom authored
commit 63cb4444 upstream. This may confuse user-space clients like plymouth that opens a drm file descriptor as a result of a hotplug event and then generates a new event... Cc: <stable@vger.kernel.org> Fixes: 5ea17348 ("drm/vmwgfx: Send a hotplug event at master_set") Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
-
Thomas Hellstrom authored
commit e41c20cf upstream. In compat mode, we allowed host-backed user-space with guest-backed kernel / device. In this mode, set shader commands was broken since no relocations were emitted. Fix this. Cc: <stable@vger.kernel.org> Fixes: e8c66efb ("drm/vmwgfx: Make user resource lookups reference-free during validation") Signed-off-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 8407f8a1 upstream. User-space handles equal to zero are interpreted as uninitialized or illegal by some drm systems (most notably kms). This means that a dumb buffer or surface with a zero user-space handle can never be used as a kms frame-buffer. Cc: <stable@vger.kernel.org> Fixes: c7eae626 ("drm/vmwgfx: Make the object handles idr-generated") Signed-off-by:
-
