Revert commit 534b483a ("cpumask: don't perform while loop in
cpumask_next_and()").

This was a minor optimization, but it puts a `struct cpumask' on the
stack, which consumes too much stack space.

Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'trace-fix-filter-4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing filter fix from Steven Rostedt:
 "Vince Weaver reported a warning when he added perf event filters into
  his fuzzer tests.  There's a missing check of balanced operations when
  parenthesis are used, and this triggers a WARN_ON() and when reading
  the failure, the filter reports no failure occurred.

  The operands were not being checked if they match, this adds that"

* tag 'trace-fix-filter-4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Have filter check for balanced ops

Pull kvm bugfix from Marcelo Tosatti:
 "Rrestore APIC migration functionality"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix lapic.timer_mode on restore

Since when we start discussions about the usage Media Controller for
complex hardware, one thing become clear: the way it is, MC fails to
map anything different than capture/output/m2m video-only streaming.

The point is that MC has entities named as devnodes, but the only
devnode used (before the DVB patches) is MEDIA_ENT_T_DEVNODE_V4L.
Due to the way MC got implemented, however, this entity actually
doesn't represent the devnode, but the hardware I/O engine that
receives data via DMA.

By coincidence, such DMA is associated with the V4L device node
on webcam hardware, but this is not true even for other V4L2
devices. For example, on USB hardware, the DMA is done via the
USB controller. The data passes though a in-kernel filter that
strips off the URB headers. Other V4L2 devices like radio may not
even have DMA. When it have, the DMA is done via ALSA, and not
via the V4L devnode.

In other words, MC is broken as a whole, but tagging it as BROKEN
right now would do more harm than good.

So, instead, let's mark, for now, the DVB part as broken and
block all new changes to MC while we fix this mess, whith
we hopefully will do for the next Kernel version.
Requested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Crash in caam hash due to uninitialised buffer lengths.

   - Alignment issue in caam RNG that may lead to non-random output"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix RNG buffer cache alignment
  crypto: caam - improve initalization for context state saves

It appears that, at some point last year, XFS made directory handling
changes which bring it into lockdep conflict with shmem_zero_setup():
it is surprising that mmap() can clone an inode while holding mmap_sem,
but that has been so for many years.

Since those few lockdep traces that I've seen all implicated selinux,
I'm hoping that we can use the __shmem_file_setup(,,,S_PRIVATE) which
v3.13's commit c7277090 ("security: shmem: implement kernel private
shmem inodes") introduced to avoid LSM checks on kernel-internal inodes:
the mmap("/dev/zero") cloned inode is indeed a kernel-internal detail.

This also covers the !CONFIG_SHMEM use of ramfs to support /dev/zero
(and MAP_SHARED|MAP_ANONYMOUS).  I thought there were also drivers
which cloned inode in mmap(), but if so, I cannot locate them now.
Reported-and-tested-by: Prarit Bhargava <prarit@redhat.com>
Reported-and-tested-by: Daniel Wagner <wagi@monom.org>
Reported-and-tested-by: Morten Stevens <mstevens@fedoraproject.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the following filter is used it causes a warning to trigger:

 # cd /sys/kernel/debug/tracing
 # echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter
-bash: echo: write error: Invalid argument
 # cat events/ext4/ext4_truncate_exit/filter
((dev==1)blocks==2)
^
parse_error: No error

 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 1223 at kernel/trace/trace_events_filter.c:1640 replace_preds+0x3c5/0x990()
 Modules linked in: bnep lockd grace bluetooth  ...
 CPU: 3 PID: 1223 Comm: bash Tainted: G        W       4.1.0-rc3-test+ #450
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
  0000000000000668 ffff8800c106bc98 ffffffff816ed4f9 ffff88011ead0cf0
  0000000000000000 ffff8800c106bcd8 ffffffff8107fb07 ffffffff8136b46c
  ffff8800c7d81d48 ffff8800d4c2bc00 ffff8800d4d4f920 00000000ffffffea
 Call Trace:
  [<ffffffff816ed4f9>] dump_stack+0x4c/0x6e
  [<ffffffff8107fb07>] warn_slowpath_common+0x97/0xe0
  [<ffffffff8136b46c>] ? _kstrtoull+0x2c/0x80
  [<ffffffff8107fb6a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff81159065>] replace_preds+0x3c5/0x990
  [<ffffffff811596b2>] create_filter+0x82/0xb0
  [<ffffffff81159944>] apply_event_filter+0xd4/0x180
  [<ffffffff81152bbf>] event_filter_write+0x8f/0x120
  [<ffffffff811db2a8>] __vfs_write+0x28/0xe0
  [<ffffffff811dda43>] ? __sb_start_write+0x53/0xf0
  [<ffffffff812e51e0>] ? security_file_permission+0x30/0xc0
  [<ffffffff811dc408>] vfs_write+0xb8/0x1b0
  [<ffffffff811dc72f>] SyS_write+0x4f/0xb0
  [<ffffffff816f5217>] system_call_fastpath+0x12/0x6a
 ---[ end trace e11028bd95818dcd ]---

Worse yet, reading the error message (the filter again) it says that
there was no error, when there clearly was. The issue is that the
code that checks the input does not check for balanced ops. That is,
having an op between a closed parenthesis and the next token.

This would only cause a warning, and fail out before doing any real
harm, but it should still not caues a warning, and the error reported
should work:

 # cd /sys/kernel/debug/tracing
 # echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter
-bash: echo: write error: Invalid argument
 # cat events/ext4/ext4_truncate_exit/filter
((dev==1)blocks==2)
^
parse_error: Meaningless filter expression

And give no kernel warning.

Link: http://lkml.kernel.org/r/20150615175025.7e809215@gandalf.local.home

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: stable@vger.kernel.org # 2.6.31+
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The hwrng output buffers (2) are cast inside of a a struct (caam_rng_ctx)
allocated in one DMA-tagged region. While the kernel's heap allocator
should place the overall struct on a cacheline aligned boundary, the 2
buffers contained within may not necessarily align. Consenquently, the ends
of unaligned buffers may not fully flush, and if so, stale data will be left
behind, resulting in small repeating patterns.

This fix aligns the buffers inside the struct.

Note that not all of the data inside caam_rng_ctx necessarily needs to be
DMA-tagged, only the buffers themselves require this. However, a fix would
incur the expense of error-handling bloat in the case of allocation failure.

Cc: stable@vger.kernel.org
Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Multiple function in asynchronous hashing use a saved-state block,
a.k.a. struct caam_hash_state, which holds a stash of information
between requests (init/update/final). Certain values in this state
block are loaded for processing using an inline-if, and when this
is done, the potential for uninitialized data can pose conflicts.
Therefore, this patch improves initialization of state data to
prevent false assignments using uninitialized data in the state block.

This patch addresses the following traceback, originating in
ahash_final_ctx(), although a problem like this could certainly
exhibit other symptoms:

kernel BUG at arch/arm/mm/dma-mapping.c:465!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = 80004000
[00000000] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT SMP
Modules linked in:
CPU: 0    Not tainted  (3.0.15-01752-gdd441b9-dirty #40)
PC is at __bug+0x1c/0x28
LR is at __bug+0x18/0x28
pc : [<80043240>]    lr : [<8004323c>]    psr: 60000013
sp : e423fd98  ip : 60000013  fp : 0000001c
r10: e4191b84  r9 : 00000020  r8 : 00000009
r7 : 88005038  r6 : 00000001  r5 : 2d676572  r4 : e4191a60
r3 : 00000000  r2 : 00000001  r1 : 60000093  r0 : 00000033
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c53c7d  Table: 1000404a  DAC: 00000015
Process cryptomgr_test (pid: 1306, stack limit = 0xe423e2f0)
Stack: (0xe423fd98 to 0xe4240000)
fd80:                                                       11807fd1 80048544
fda0: 88005000 e4191a00 e5178040 8039dda0 00000000 00000014 2d676572 e4191008
fdc0: 88005018 e4191a60 00100100 e4191a00 00000000 8039ce0c e423fea8 00000007
fde0: e4191a00 e4227000 e5178000 8039ce18 e419183c 80203808 80a94a44 00000006
fe00: 00000000 80207180 00000000 00000006 e423ff08 00000000 00000007 e5178000
fe20: e41918a4 80a949b4 8c4844e2 00000000 00000049 74227000 8c4844e2 00000e90
fe40: 0000000e 74227e90 ffff8c58 80ac29e0 e423fed4 8006a350 8c81625c e423ff5c
fe60: 00008576 e4002500 00000003 00030010 e4002500 00000003 e5180000 e4002500
fe80: e5178000 800e6d24 007fffff 00000000 00000010 e4001280 e4002500 60000013
fea0: 000000d0 804df078 00000000 00000000 00000000 00000000 00000000 00000000
fec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
fee0: 00000000 00000000 e4227000 e4226000 e4753000 e4752000 e40a5000 e40a4000
ff00: e41e7000 e41e6000 00000000 00000000 00000000 e423ff14 e423ff14 00000000
ff20: 00000400 804f9080 e5178000 e4db0b40 00000000 e4db0b80 0000047c 00000400
ff40: 00000000 8020758c 00000400 ffffffff 0000008a 00000000 e4db0b40 80206e00
ff60: e4049dbc 00000000 00000000 00000003 e423ffa4 80062978 e41a8bfc 00000000
ff80: 00000000 e4049db4 00000013 e4049db0 00000013 00000000 00000000 00000000
ffa0: e4db0b40 e4db0b40 80204cbc 00000013 00000000 00000000 00000000 80204cfc
ffc0: e4049da0 80089544 80040a40 00000000 e4db0b40 00000000 00000000 00000000
ffe0: e423ffe0 e423ffe0 e4049da0 800894c4 80040a40 80040a40 00000000 00000000
[<80043240>] (__bug+0x1c/0x28) from [<80048544>] (___dma_single_dev_to_cpu+0x84)
[<80048544>] (___dma_single_dev_to_cpu+0x84/0x94) from [<8039dda0>] (ahash_fina)
[<8039dda0>] (ahash_final_ctx+0x180/0x428) from [<8039ce18>] (ahash_final+0xc/0)
[<8039ce18>] (ahash_final+0xc/0x10) from [<80203808>] (crypto_ahash_op+0x28/0xc)
[<80203808>] (crypto_ahash_op+0x28/0xc0) from [<80207180>] (test_hash+0x214/0x5)
[<80207180>] (test_hash+0x214/0x5b8) from [<8020758c>] (alg_test_hash+0x68/0x8c)
[<8020758c>] (alg_test_hash+0x68/0x8c) from [<80206e00>] (alg_test+0x7c/0x1b8)
[<80206e00>] (alg_test+0x7c/0x1b8) from [<80204cfc>] (cryptomgr_test+0x40/0x48)
[<80204cfc>] (cryptomgr_test+0x40/0x48) from [<80089544>] (kthread+0x80/0x88)
[<80089544>] (kthread+0x80/0x88) from [<80040a40>] (kernel_thread_exit+0x0/0x8)
Code: e59f0010 e1a01003 eb126a8d e3a03000 (e5833000)
---[ end trace d52a403a1d1eaa86 ]---

Cc: stable@vger.kernel.org
Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

lapic.timer_mode was not properly initialized after migration, which
broke few useful things, like login, by making every sleep eternal.

Fix this by calling apic_update_lvtt in kvm_apic_post_state_restore.

There are other slowpaths that update lvtt, so this patch makes sure
something similar doesn't happen again by calling apic_update_lvtt
after every modification.

Cc: stable@vger.kernel.org
Fixes: f30ebc31 ("KVM: x86: optimize some accesses to LVTT and SPIV")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Pull dmaengine fixes from Vinod Koul:
 "Here are hopefully last set of fixes for 4.1. This time we have:

   - fixing pause capability reporting on both dmaengine pause & resume
     support by Krzysztof

   - locking fix fir at_xdmac by Ludovic

   - slave configuration fix for at_xdmac by Ludovic"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: Fix choppy sound because of unimplemented resume
  dmaengine: at_xdmac: rework slave configuration part
  dmaengine: at_xdmac: lock fixes

Pull NTB fixes from Jon Mason:
 "I apologize for the tardiness of this request.  Here are a couple of
  last minute NTB bug fixes for v4.1:

  NTB bug fixes to address issues in unmapping the MW reg base and
  vbase, and an uninitialized variable on Atom platforms"

* tag 'ntb-4.1' of git://github.com/jonmason/ntb:
  ntb: initialize max_mw for Atom before using it
  ntb: iounmap MW reg and vbase in error path

Pull more MIPS fixes from Ralf Baechle:
 "Another round of 4.1 MIPS fixes, one fix to a MIPS-specific #if
  condition in lib/mpi, one fix to the MIPS GIC irqchip driver and one
  SSB fix.

  Details:
   - fix handling of clock in chipco SSB driver.
   - fix two MIPS-specific #if conditions to correctly work for GCC 5.1.
   - fix damage to R6 pgtable bits done by XPA support.
   - fix possible crash due to unloading modules that contain statically
     defined platform devices.
   - fix disabling of the MSA ASE on context switch to also work
     correctly when a new thread/process has the CPU for the very first
     time.

  This is part of linux-next and has been beaten to death on
  Imagination's test farm.

  While things are not looking too grim this pull request also means the
  rate of fixes for 4.1 remains nearly constant so I'd not be unhappy if
  you'd delay the release"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MPI: MIPS: Fix compilation error with GCC 5.1
  IRQCHIP: mips-gic: Don't nest calls to do_IRQ()
  MIPS: MSA: bugfix - disable MSA correctly for new threads/processes.
  MIPS: Loongson: Do not register 8250 platform device from module.
  MIPS: Cobalt: Do not build MTD platform device registration code as module.
  SSB: Fix handling of ssb_pmu_get_alp_clock()
  MIPS: pgtable-bits: Fix XPA damage to R6 definitions.

Pull irqchip fix from Thomas Gleixner:
 "A single fix for an off by one bug in the sunxi irqchip driver"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: sunxi-nmi: Fix off-by-one error in irq iterator

Pull lockdep fix from Ingo Molnar:
 "A lockdep/modules unload race fix that can oops"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Fix a race between /proc/lock_stat and module unload

Pull perf fixes from Ingo Molnar:
 "A regression fix for a crash, and a Intel HSW uncore PMU driver fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization"
  perf/x86/intel/uncore: Fix CBOX bit wide and UBOX reg on Haswell-EP

Pull sound fixes from Takashi Iwai:
 "Most of commits are regression fixes for HD-audio: a few corner case
  fixes for regmap transition, and i915 binding issues.

  In addition, a quirk for another USB-audio device supporting DSD"

* tag 'sound-4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Abort the probe without i915 binding for HSW/BDW
  ALSA: hda - Re-add the lost fake mute support
  ALSA: hda - Continue probing even if i915 binding fails
  ALSA: hda - Don't actually write registers for caps overwrites
  ALSA: hda - fix number of devices query on hotplug
  ALSA: usb-audio: add native DSD support for JLsounds I2SoverUSB

This patch fixes mips compilation error:

lib/mpi/generic_mpih-mul1.c: In function 'mpihelp_mul_1':
lib/mpi/longlong.h:651:2: error: impossible constraint in 'asm'
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/10546/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The GIC chained handlers use do_IRQ() to call the subhandlers.  This
means that irq_enter() calls get nested, which leads to preempt count
looking like we're in nested interrupts, which in turn leads to all
system time being accounted as IRQ time in account_system_time().

Fix it by using generic_handle_irq().  Since these same functions are
used in some systems (if cpu_has_veic) from a low-level vectored
interrupt handler which does not go throught do_IRQ(), we need to do it
conditionally.
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Patchwork: https://patchwork.linux-mips.org/patch/10545/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull networking fixes from David Miller:

 1) Fix uninitialized struct station_info in cfg80211_wireless_stats(),
    from Johannes Berg.

 2) Revert commit attempt to fix ipv6 protocol resubmission, it adds
    regressions.

 3) Endless loops can be created in bridge port lists, fix from Nikolay
    Aleksandrov.

 4) Don't WARN_ON() if sk->sk_forward_alloc is non-zero in
    sk_clear_memalloc, it is a legal situation during swap deactivation.
    Fix from Mel Gorman.

 5) Fix order of disabling interrupts and unlocking NAPI in enic driver
    to avoid a race.  From Govindarajulu Varadarajan.

 6) High and low register writes are swapped when programming the start
    of periodic output in igb driver.  From Richard Cochran.

 7) Fix device rename handling in mpls stack, from Robert Shearman.

 8) Do not trigger compaction synchronously when optimistically trying
    to allocate an order 3 page in alloc_skb_with_frags() and
    skb_page_frag_refill().  From Shaohua Li.

 9) Authentication with COOKIE_ECHO is not handled properly in SCTP, fix
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  Doc: networking: Fix URL for wiki.wireshark.org in udplite.txt
  sctp: allow authenticating DATA chunks that are bundled with COOKIE_ECHO
  net: don't wait for order-3 page allocation
  mpls: handle device renames for per-device sysctls
  net: igb: fix the start time for periodic output signals
  enic: fix memory leak in rq_clean
  enic: check return value for stat dump
  enic: unlock napi busy poll before unmasking intr
  net, swap: Remove a warning and clarify why sk_mem_reclaim is required when deactivating swap
  bridge: fix multicast router rlist endless loop
  tipc: disconnect socket directly after probe failure
  Revert "ipv6: Fix protocol resubmission"
  cfg80211: wext: clear sinfo struct before calling driver

This patch fix URL (http to https) for wiki.wireshark.org.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we can ask to authenticate DATA chunks and we can send DATA
chunks on the same packet as COOKIE_ECHO, but if you try to combine
both, the DATA chunk will be sent unauthenticated and peer won't accept
it, leading to a communication failure.

This happens because even though the data was queued after it was
requested to authenticate DATA chunks, it was also queued before we
could know that remote peer can handle authenticating, so
sctp_auth_send_cid() returns false.

The fix is whenever we set up an active key, re-check send queue for
chunks that now should be authenticated. As a result, such packet will
now contain COOKIE_ECHO + AUTH + DATA chunks, in that order.
Reported-by: Liu Wei <weliu@redhat.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull block layer fixes from Jens Axboe:
 "Remember about a week ago when I sent the last pull request for 4.1?
  Well, I lied.  Now, I don't want to shift the blame, but Dan, Ming,
  and Richard made a liar out of me.

  Here are three small patches that should go into 4.1.  More
  specifically, this pull request contains:

   - A Kconfig dependency for the pmem block driver, so it can't be
     selected if HAS_IOMEM isn't availble.  From Richard Weinberger.

   - A fix for genhd, making the ext_devt_lock softirq safe.  This makes
     lockdep happier, since we also end up grabbing this lock on release
     off the softirq path.  From Dan Williams.

   - A blk-mq software queue release fix from Ming Lei.

  Last two are headed to stable, first fixes an issue introduced in this
  cycle"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: pmem: Add dependency on HAS_IOMEM
  block: fix ext_dev_lock lockdep report
  blk-mq: free hctx->ctxs in queue's release handler

Pull three more md fixes from Neil Brown:
 "Hasn't been a good cycle for md has it :-(

  The main issue fixed here is a rare race which can result in two
  reshape threads running at once, which doesn't end well.

  Also a minor issue with a write to a sysfs file returning the wrong
  value.  Backports to 4.0-stable are indicated"

* tag 'md/4.1-rc7-fixes' of git://neil.brown.name/md:
  md: make sure MD_RECOVERY_DONE is clear before starting recovery/resync
  md: Close race when setting 'action' to 'idle'.
  md: don't return 0 from array_state_store

Pull VT-d hardware workarounds from David Woodhouse:
 "This contains a workaround for hardware issues which I *thought* were
  never going to be seen on production hardware.  I'm glad I checked
  that before the 4.1 release...

  Firstly, PASID support is so broken on existing chips that we're just
  going to declare the old capability bit 28 as 'reserved' and change
  the VT-d spec to move PASID support to another bit.  So any existing
  hardware doesn't support SVM; it only sets that (now) meaningless bit
  28.

  That patch *wasn't* imperative for 4.1 because we don't have PASID
  support yet.  But *even* the extended context tables are broken — if
  you just enable the wider tables and use none of the new bits in them,
  which is precisely what 4.1 does, you find that translations don't
  work.  It's this problem which I thought was caught in time to be
  fixed before production, but wasn't.

  To avoid triggering this issue, we now *only* enable the extended
  context tables on hardware which also advertises "we have PASID
  support and we actually tested it this time" with the new PASID
  feature bit.

  In addition, I've added an 'intel_iommu=ecs_off' command line
  parameter to allow us to disable it manually if we need to"

* git://git.infradead.org/intel-iommu:
  iommu/vt-d: Only enable extended context tables if PASID is supported
  iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register

Although the extended tables are theoretically a completely orthogonal
feature to PASID and anything else that *uses* the newly-available bits,
some of the early hardware has problems even when all we do is enable
them and use only the same bits that were in the old context tables.

For now, there's no motivation to support extended tables unless we're
going to use PASID support to do SVM. So just don't use them unless
PASID support is advertised too. Also add a command-line bailout just in
case later chips also have issues.

The equivalent problem for PASID support has already been fixed with the
upcoming VT-d spec update and commit bd00c606 ("iommu/vt-d: Change
PASID support to bit 40 of Extended Capability Register"), because the
problematic platforms use the old definition of the PASID-capable bit,
which is now marked as reserved and meaningless.

So with this change, we'll magically start using ECS again only when we
see the new hardware advertising "hey, we have PASID support and we
actually tested it this time" on bit 40.

The VT-d hardware architect has promised that we are not going to have
any reason to support ECS *without* PASID any time soon, and he'll make
sure he checks with us before changing that.

In the future, if hypothetical new features also use new bits in the
context tables and can be seen on implementations *without* PASID support,
we might need to add their feature bits to the ecs_enabled() macro.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

MD_RECOVERY_DONE is normally cleared by md_check_recovery after a
resync etc finished.  However it is possible for raid5_start_reshape
to race and start a reshape before MD_RECOVERY_DONE is cleared.  This
can lean to multiple reshapes running at the same time, which isn't
good.

To make sure it is cleared before starting a reshape, and also clear
it when reaping a thread, just to be safe.
Signed-off-by: NeilBrown  <neilb@suse.de>

Checking ->sync_thread without holding the mddev_lock()
isn't really safe, even after flushing the workqueue which
ensures md_start_sync() has been run.

While this code is waiting for the lock, md_check_recovery could reap
the thread itself, and then start another thread (e.g. recovery might
finish, then reshape starts).  When this thread gets the lock
md_start_sync() hasn't run so it doesn't get reaped, but
MD_RECOVERY_RUNNING gets cleared.  This allows two threads to start
which leads to confusion.

So don't both if MD_RECOVERY_RUNNING isn't set, but if it is do
the flush and the test and the reap all under the mddev_lock to
avoid any race with md_check_recovery.
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.")
Cc: stable@vger.kernel.org (v4.0+)

Returning zero from a 'store' function is bad.
The return value should be either len length of the string
or an error.

So use 'len' if 'err' is zero.

Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.")
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@vger.kernel (v4.0+)

Some drivers implement only pause operation (no resuming). Example is
pl330 where pause is needed for getting residuum. pl330 does not support
resume operation, transfer must be stopped after pause.

However for slaves this is exposed always as "pause and resume" which
introduces subtle errors on Odroid U3 board (Exynos4412 with pl330).
After adding pause function to pl330 driver the audio playback
(utilizing DMA) gets choppy after some time (approximately 24 hours).

Fix this by exposing "cmd_pause" if and only if pause and resume are
implemented.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: gabriel@unseen.is
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: <stable@vger.kernel.org>
Fixes: 88987d2c ("dmaengine: pl330: add DMA_PAUSE feature")
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

The previous patch tried to continue the probe if i915 binding fails.
For for simplicity reason, we haven't implemented abort even for
controller chips that are dedicated for HDMI/DP on HSW and BDW.
However, Mengdong suggested that this can be dangerous; BIOS may
disable gfx power well although the PCI entry for HD-audio is left,
and this may result in the unexpected behavior, kernel errors, etc.

For avoiding this situation, abort the probe at i915 binding failure
only for HSW/BDW chips selectively.  For other chips, it still
continues.

Fixes: bf06848b ('ALSA: hda - Continue probing even if i915 binding fails')
Reported-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull drm fixes from Dave Airlie:
 "i915 and radeon fixes:

  i915:
      fix for connector oops regression
      DDC probing fix

  radeon:
      two radeon reverts, along with a freeze workaround and a fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
  Revert "drm/radeon: adjust pll when audio is not enabled"
  Revert "drm/radeon: don't share plls if monitors differ in audio support"
  drm/radeon: fix freeze for laptop with Turks/Thames GPU.
  drm/i915: Fix DDC probe for passive adapters
  drm/i915: Properly initialize SDVO analog connectors

We saw excessive direct memory compaction triggered by skb_page_frag_refill.
This causes performance issues and add latency. Commit 5640f768
introduces the order-3 allocation. According to the changelog, the order-3
allocation isn't a must-have but to improve performance. But direct memory
compaction has high overhead. The benefit of order-3 allocation can't
compensate the overhead of direct memory compaction.

This patch makes the order-3 page allocation atomic. If there is no memory
pressure and memory isn't fragmented, the alloction will still success, so we
don't sacrifice the order-3 benefit here. If the atomic allocation fails,
direct memory compaction will not be triggered, skb_page_frag_refill will
fallback to order-0 immediately, hence the direct memory compaction overhead is
avoided. In the allocation failure case, kswapd is waken up and doing
compaction, so chances are allocation could success next time.

alloc_skb_with_frags is the same.

The mellanox driver does similar thing, if this is accepted, we must fix
the driver too.

V3: fix the same issue in alloc_skb_with_frags as pointed out by Eric
V2: make the changelog clearer

Cc: Eric Dumazet <edumazet@google.com>
Cc: Chris Mason <clm@fb.com>
Cc: Debabrata Banerjee <dbavatar@gmail.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix for the regression Linus called out, and another for probing
dongles.

* tag 'drm-intel-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Fix DDC probe for passive adapters
  drm/i915: Properly initialize SDVO analog connectors

Two regression reverts, and two fixes, one for a dpm boot freeze.

* 'drm-fixes-4.1' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
  Revert "drm/radeon: adjust pll when audio is not enabled"
  Revert "drm/radeon: don't share plls if monitors differ in audio support"
  drm/radeon: fix freeze for laptop with Turks/Thames GPU.

If a device is renamed and the original name is subsequently reused
for a new device, the following warning is generated:

sysctl duplicate entry: /net/mpls/conf/veth0//input
CPU: 3 PID: 1379 Comm: ip Not tainted 4.1.0-rc4+ #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
 0000000000000000 0000000000000000 ffffffff81566aaf 0000000000000000
 ffffffff81236279 ffff88002f7d7f00 0000000000000000 ffff88000db336d8
 ffff88000db33698 0000000000000005 ffff88002e046000 ffff8800168c9280
Call Trace:
 [<ffffffff81566aaf>] ? dump_stack+0x40/0x50
 [<ffffffff81236279>] ? __register_sysctl_table+0x289/0x5a0
 [<ffffffffa051a24f>] ? mpls_dev_notify+0x1ff/0x300 [mpls_router]
 [<ffffffff8108db7f>] ? notifier_call_chain+0x4f/0x70
 [<ffffffff81470e72>] ? register_netdevice+0x2b2/0x480
 [<ffffffffa0524748>] ? veth_newlink+0x178/0x2d3 [veth]
 [<ffffffff8147f84c>] ? rtnl_newlink+0x73c/0x8e0
 [<ffffffff8147f27a>] ? rtnl_newlink+0x16a/0x8e0
 [<ffffffff81459ff2>] ? __kmalloc_reserve.isra.30+0x32/0x90
 [<ffffffff8147ccfd>] ? rtnetlink_rcv_msg+0x8d/0x250
 [<ffffffff8145b027>] ? __alloc_skb+0x47/0x1f0
 [<ffffffff8149badb>] ? __netlink_lookup+0xab/0xe0
 [<ffffffff8147cc70>] ? rtnetlink_rcv+0x30/0x30
 [<ffffffff8149e7a0>] ? netlink_rcv_skb+0xb0/0xd0
 [<ffffffff8147cc64>] ? rtnetlink_rcv+0x24/0x30
 [<ffffffff8149df17>] ? netlink_unicast+0x107/0x1a0
 [<ffffffff8149e4be>] ? netlink_sendmsg+0x50e/0x630
 [<ffffffff8145209c>] ? sock_sendmsg+0x3c/0x50
 [<ffffffff81452beb>] ? ___sys_sendmsg+0x27b/0x290
 [<ffffffff811bd258>] ? mem_cgroup_try_charge+0x88/0x110
 [<ffffffff811bd5b6>] ? mem_cgroup_commit_charge+0x56/0xa0
 [<ffffffff811d7700>] ? do_filp_open+0x30/0xa0
 [<ffffffff8145336e>] ? __sys_sendmsg+0x3e/0x80
 [<ffffffff8156c3f2>] ? system_call_fastpath+0x16/0x75

Fix this by unregistering the previous sysctl table (registered for
the path containing the original device name) and re-registering the
table for the path containing the new device name.

Fixes: 37bde799 ("mpls: Per-device enabling of packet input")
Reported-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When programming the start of a periodic output, the code wrongly places
the seconds value into the "low" register and the nanoseconds into the
"high" register.  Even though this is backwards, it slipped through my
testing, because the re-arming code in the interrupt service routine is
correct, and the signal does appear starting with the second edge.

This patch fixes the issue by programming the registers correctly.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not all architectures have io memory.

Fixes:
drivers/block/pmem.c: In function ‘pmem_alloc’:
drivers/block/pmem.c:146:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration]
  pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size);
  ^
drivers/block/pmem.c:146:18: warning: assignment makes pointer from integer without a cast [enabled by default]
  pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size);
                  ^
drivers/block/pmem.c:182:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
  iounmap(pmem->virt_addr);
  ^
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Merge tag 'trace-rb-bm-fix-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ring buffer benchmark buglet fix from Steven Rostedt:
 "Wang Long fixed a minor bug in the module parameter for the ring
  buffer benchmark, where the produce_fifo was being ignored and the
  producer thread's priority was being set with the consumer_fifo
  parameter"

* tag 'trace-rb-bm-fix-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer-benchmark: Fix the wrong sched_priority of producer