Allow the term list to be const so that other functions can pass const
term lists. Add const as necessary to called functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-9-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Avoid duplicate logic for name_or_raw and PE_TERM_HW by having a rule
to turn PE_TERM_HW into a name_or_raw.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-8-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Prior behavior is to not look for legacy cache names in sysfs/JSON and
to create events on all core PMUs. New behavior is to look for
sysfs/JSON events first on all PMUs, for core PMUs add a legacy event
if the sysfs/JSON event isn't present.

This is done so that there is consistency with how event names in
terms are handled and their prioritization of sysfs/JSON over
legacy. It may make sense to use a legacy cache event name as an event
name on a non-core PMU so we should allow it.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-7-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Switch from "cache-references" to "branches" in test as Intel has a
sysfs event for "cache-references" and changing the priority for sysfs
over legacy causes the test to fail.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-6-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Move all implementation to pmu code. Don't allocate a fnmatch wildcard
pattern, matching ignoring the suffix already handles this, and only
use fnmatch if the given PMU name has a '*' in it.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-5-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In parse_events_add_pmu, delay copying the list of terms until it is
known the list contains terms.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-4-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Avoid passing the name of a PMU then finding it again, just directly
pass the PMU. parse_events_multi_pmu_add_or_add_pmu() is the only version
that needs to find a PMU, so move the find there. Remove the error
message as parse_events_multi_pmu_add_or_add_pmu will given an error at
the end when a name isn't either a PMU name or event name. Without the
error message being created the location in the input parameter (loc)
can be removed.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-3-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Factor out the case of an event or PMU name followed by a slash based
term list. This is with a view to sharing the code with new legacy
hardware parsing. Use early return to reduce indentation in the code.
Make parse_events_add_pmu static now it doesn't need sharing with
parse-events.y.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-2-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a Python script to run a perf script command multiple times in
parallel, using perf script options --cpu and --time so that each job
processes a different chunk of the data.

Extend perf script tests to test also the new script.

The script supports the use of normal 'perf script' options like
--dlfilter and --script, so that the benefit of running parallel jobs
naturally extends to them also. In addition, a command can be provided
(refer --pipe-to option) to pipe standard output to a custom command.

Refer to the script's own help text at the end of the patch for more
details.

The script is useful for Intel PT traces, that can be efficiently
decoded by 'perf script' when split by CPU and/or time ranges. Running
jobs in parallel can decrease the overall decoding time.

Committer testing:

  Ian reported that shellcheck found some issues, I installed it as there
  are no warnings about it not being available, but when available it
  fails the build with:

    TEST    /tmp/build/perf-tools-next/tests/shell/script.sh.shellcheck_log
    CC      /tmp/build/perf-tools-next/util/header.o

  In tests/shell/script.sh line 20:
                  rm -rf "${temp_dir}/"*
                         ^-------------^ SC2115 (warning): Use "${var:?}" to ensure this never expands to /* .

  In tests/shell/script.sh line 83:
          output1_dir="${temp_dir}/output1"
          ^---------^ SC2034 (warning): output1_dir appears unused. Verify use (or export if used externally).

  In tests/shell/script.sh line 84:
          output2_dir="${temp_dir}/output2"
          ^---------^ SC2034 (warning): output2_dir appears unused. Verify use (or export if used externally).

  In tests/shell/script.sh line 86:
          python3 "${pp}" -o "${output_dir}" --jobs 4 --verbose -- perf script -i "${perf_data}"
                              ^-----------^ SC2154 (warning): output_dir is referenced but not assigned (did you mean 'output1_dir'?).

  For more information:
    https://www.shellcheck.net/wiki/SC2034 -- output1_dir appears unused. Verif...
    https://www.shellcheck.net/wiki/SC2115 -- Use "${var:?}" to ensure this nev...
    https://www.shellcheck.net/wiki/SC2154 -- output_dir is referenced but not ...

Did these fixes:

  -               rm -rf "${temp_dir}/"*
  +               rm -rf "${temp_dir:?}/"*

And:

   @@ -83,8 +83,8 @@ test_parallel_perf()
          output1_dir="${temp_dir}/output1"
          output2_dir="${temp_dir}/output2"
          perf record -o "${perf_data}" --sample-cpu uname
  -       python3 "${pp}" -o "${output_dir}" --jobs 4 --verbose -- perf script -i "${perf_data}"
  -       python3 "${pp}" -o "${output_dir}" --jobs 4 --verbose --per-cpu -- perf script -i "${perf_data}"
  +       python3 "${pp}" -o "${output1_dir}" --jobs 4 --verbose -- perf script -i "${perf_data}"
  +       python3 "${pp}" -o "${output2_dir}" --jobs 4 --verbose --per-cpu -- perf script -i "${perf_data}"

After that:

  root@number:~# perf test -vv "perf script tests"
   97: perf script tests:
  --- start ---
  test child forked, pid 4084139
  DB test
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.032 MB /tmp/perf-test-script.T4MJDr0L6J/perf.data (7 samples) ]
  <SNIP>
  DB test [Success]
  parallel-perf test
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.034 MB /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data (7 samples) ]
  Starting: perf script --time=,91898.301878499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --time=91898.301878500,91898.301905999 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --time=91898.301906000,91898.301933499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --time=91898.301933500, -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --time=91898.301878500,91898.301905999 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --time=91898.301906000,91898.301933499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  There are 4 jobs: 2 completed, 2 running
  Finished: perf script --time=,91898.301878499 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --time=91898.301933500, -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  There are 4 jobs: 4 completed, 0 running
  All jobs finished successfully
  parallel-perf.py done
  Starting: perf script --cpu=0 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=1 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=2 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=3 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=0 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=1 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=2 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=3 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  There are 28 jobs: 4 completed, 0 running
  Starting: perf script --cpu=4 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=5 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=6 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=7 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=4 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=5 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=6 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=7 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  There are 28 jobs: 8 completed, 0 running
  Starting: perf script --cpu=8 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=9 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=10 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=11 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=8 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=9 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=10 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=11 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  There are 28 jobs: 12 completed, 0 running
  Starting: perf script --cpu=12 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=13 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=14 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=15 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=12 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=13 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=14 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=15 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  There are 28 jobs: 16 completed, 0 running
  Starting: perf script --cpu=16 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=17 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=18 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=19 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=16 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=17 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=18 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=19 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  There are 28 jobs: 20 completed, 0 running
  Starting: perf script --cpu=20 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=21 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=22 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=23 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=20 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=21 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=22 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=23 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  There are 28 jobs: 24 completed, 0 running
  Starting: perf script --cpu=24 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=25 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=26 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Starting: perf script --cpu=27 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=25 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=26 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  Finished: perf script --cpu=27 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  There are 28 jobs: 27 completed, 1 running
  Finished: perf script --cpu=24 -i /tmp/perf-test-script.T4MJDr0L6J/pp-perf.data
  There are 28 jobs: 28 completed, 0 running
  All jobs finished successfully
  parallel-perf.py done
  parallel-perf test [Success]
  --- Cleaning up ---
  ---- end(0) ----
   97: perf script tests                                               : Ok
  root@number:~#
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240423133248.10206-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The tools/lib/rbtree.c code came from the kernel, removing the
EXPORT_SYMBOL() that make sense only there, unfortunately it is not
being checked with tools/perf/check_headers.sh, will try to remedy this,
till then pick the improvements from:

  b0687c11 ("lib/rbtree: use '+' instead of '|' for setting color.")

That I noticed by doing:

  diff -u tools/lib/rbtree.c lib/rbtree.c
  diff -u tools/include/linux/rbtree_augmented.h include/linux/rbtree_augmented.h

There is one other cases, but lets pick it in separate patches.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Noah Goldstein <goldstein.w.n@gmail.com>
Link: https://lore.kernel.org/lkml/ZigZzeFoukzRKG1Q@x1Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Before:

  root@x1:~# perf test 76
   76: SPDX-License-Identifier: GPL-2.0                                : Ok
  root@x1:~#

After:

  root@x1:~# perf test 76
   76: Add 'perf probe's, list and remove them.                        : Ok
  root@x1:~#
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/lkml/ZigRDKUGkcDqD-yW@x1Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick up the changes from these csets:

  be482ff9 ("x86/bhi: Enumerate Branch History Injection (BHI) bug")
  0f4a8376 ("x86/bhi: Define SPEC_CTRL_BHI_DIS_S")

That cause no changes to tooling:

  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > x86_msr.before
  $ objdump -dS /tmp/build/perf-tools-next/util/amd-sample-raw.o > amd-sample-raw.o.before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ make -C tools/perf O=/tmp/build/perf-tools-next
  <SNIP>
  CC      /tmp/build/perf-tools-next/trace/beauty/tracepoints/x86_msr.o
  <SNIP>
  CC      /tmp/build/perf-tools-next/util/amd-sample-raw.o
  <SNIP>
  $ objdump -dS /tmp/build/perf-tools-next/util/amd-sample-raw.o > amd-sample-raw.o.after
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > x86_msr.after
  $ diff -u x86_msr.before x86_msr.after
  $ diff -u amd-sample-raw.o.before amd-sample-raw.o.after

Just silences this perf build warning:

  Warning: Kernel ABI header differences:
    diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/ZifCnEZFx5MZQuIW@x1Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

  2855c2a7 ("vhost-vdpa: change ioctl # for VDPA_GET_VRING_SIZE")
  1496c470 ("vhost-vdpa: uapi to support reporting per vq size")

To pick up these changes and support them:

  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
  $ cp include/uapi/linux/vhost.h tools/perf/trace/beauty/include/uapi/linux/vhost.h
  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
  $ diff -u before after
  --- before	2024-04-22 13:39:37.185674799 -0300
  +++ after	2024-04-22 13:39:52.043344784 -0300
  @@ -50,5 +50,6 @@
   	[0x7F] = "VDPA_GET_VRING_DESC_GROUP",
   	[0x80] = "VDPA_GET_VQS_COUNT",
   	[0x81] = "VDPA_GET_GROUP_NUM",
  +	[0x82] = "VDPA_GET_VRING_SIZE",
   	[0x8] = "NEW_WORKER",
   };
  $

For instance, see how those 'cmd' ioctl arguments get translated, now
VDPA_GET_VRING_SIZE will be as well:

  # perf trace -a -e ioctl --max-events=10
       0.000 ( 0.011 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1)                   = 0
      21.353 ( 0.014 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1)                   = 0
      25.766 ( 0.014 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740)    = 0
      25.845 ( 0.034 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
      25.916 ( 0.011 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0)       = 0
      25.941 ( 0.025 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ATOMIC, arg: 0x7ffe4a22c840)       = 0
      32.915 ( 0.009 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_RMFB, arg: 0x7ffe4a22cf9c)         = 0
      42.522 ( 0.013 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740)    = 0
      42.579 ( 0.031 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
      42.644 ( 0.010 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0)       = 0
  #

This addresses this perf tools build warning:

  diff -u tools/perf/trace/beauty/include/uapi/linux/vhost.h include/uapi/linux/vhost.h

But this specific process, usually boring, this time around catch a
problem, namely the addition of VDPA_GET_VRING_SIZE used an ioctl number
already taken, which went on unnoticed and only got caught when the
tools/perf/trace/beauty/vhost_virtio_ioctl.sh script was run as part of
the perf tools process of updating the tools copies of system headers it
uses for creating id->string tables that, well, broke the perf tools
build because there were multiple initializations in the strings table
for the 0x80 entry...

I'm adding here a link to the discussion, that is lacking in the fix for
the reported problem, and a quote from one of the developers involved:

"Thanks a lot for taking care of this! So given the header is actually
buggy pls hang on to this change until I merge the fix for the header
(you were CC'd on the patch).  It's great we have this redundancy which
allowed us to catch the bug in time, and many thanks to Namhyung Kim for
reporting the issue!"

This is here as a hint for anyone thinking about ways to automate
checking these issues in a more automated way... ;-)

Link: https://lore.kernel.org/lkml/ 20240402172151-mutt-send-email-mst@kernel.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/lkml/ZiaW-csEZLKK48BE@x1Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick up fixes sent via perf-tools, by Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull char / misc driver fixes from Greg KH:
 "Here are some small char/misc and other driver fixes for 6.9-rc5.
  Included in here are the following:

   - binder driver fix for reported problem

   - speakup crash fix

   - mei driver fixes for reported problems

   - comdei driver fix

   - interconnect driver fixes

   - rtsx driver fix

   - peci.h kernel doc fix

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  peci: linux/peci.h: fix Excess kernel-doc description warning
  binder: check offset alignment in binder_get_object()
  comedi: vmk80xx: fix incomplete endpoint checking
  mei: vsc: Unregister interrupt handler for system suspend
  Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"
  misc: rtsx: Fix rts5264 driver status incorrect when card removed
  mei: me: disable RPL-S on SPS and IGN firmwares
  speakup: Avoid crash on very long word
  interconnect: Don't access req_list while it's being manipulated
  interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM

Pull kernfs bugfix and documentation update from Greg KH:
 "Here are two changes for 6.9-rc5 that deal with "driver core" stuff,
  that do the following:

   - sysfs reference leak fix

   - embargoed-hardware-issues.rst update for Power

  Both of these have been in linux-next for over a week with no reported
  issues"

* tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: embargoed-hardware-issues.rst: Add myself for Power
  fs: sysfs: Fix reference leak in sysfs_break_active_protection()

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.9-rc5 that
  resolve a bunch of reported problems. Included in here are:

   - MAINTAINERS and .mailmap update for Richard Genoud

   - serial core regression fixes from 6.9-rc1 changes

   - pci id cleanups

   - serial core crash fix

   - stm32 driver fixes

   - 8250 driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: stm32: Reset .throttled state in .startup()
  serial: stm32: Return IRQ_NONE in the ISR if no handling happend
  serial: core: Fix missing shutdown and startup for serial base port
  serial: core: Clearing the circular buffer before NULLifying it
  MAINTAINERS: mailmap: update Richard Genoud's email address
  serial/pmac_zilog: Remove flawed mitigation for rx irq flood
  serial: 8250_pci: Remove redundant PCI IDs
  serial: core: Fix regression when runtime PM is not enabled
  serial: mxs-auart: add spinlock around changing cts state
  serial: 8250_dw: Revert: Do not reclock if already at correct rate
  serial: 8250_lpc18xx: disable clks on error in probe()

Pull USB / Thunderbolt driver fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for 6.9-rc5.
  Included in here are:

   - MAINTAINER file update for invalid email address

   - usb-serial device id updates

   - typec driver fixes

   - thunderbolt / usb4 driver fixes

   - usb core shutdown fixes

   - cdc-wdm driver revert for reported problem in -rc1

   - usb gadget driver fixes

   - xhci driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
  USB: serial: option: add Telit FN920C04 rmnet compositions
  usb: dwc3: ep0: Don't reset resource alloc flag
  Revert "usb: cdc-wdm: close race between read and workqueue"
  USB: serial: option: add Rolling RW101-GL and RW135-GL support
  USB: serial: option: add Lonsung U8300/U9300 product
  USB: serial: option: add support for Fibocom FM650/FG650
  USB: serial: option: support Quectel EM060K sub-models
  USB: serial: option: add Fibocom FM135-GL variants
  usb: misc: onboard_usb_hub: Disable the USB hub clock on failure
  thunderbolt: Avoid notify PM core about runtime PM resume
  thunderbolt: Fix wake configurations after device unplug
  usb: dwc2: host: Fix dereference issue in DDMA completion flow.
  usb: typec: mux: it5205: Fix ChipID value typo
  MAINTAINERS: Drop Li Yang as their email address stopped working
  usb: gadget: fsl: Initialize udc before using it
  usb: Disable USB3 LPM at shutdown
  usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
  usb: typec: tcpm: Correct the PDO counting in pd_set
  usb: gadget: functionfs: Wait for fences before enqueueing DMABUF
  usb: gadget: functionfs: Fix inverted DMA fence direction
  ...

Pull scheduler fix from Borislav Petkov:

 - Add a missing memory barrier in the concurrency ID mm switching

* tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Add missing memory barrier in switch_mm_cid

Pull x86 fixes from Borislav Petkov:

 - Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ

 - Print the correct error code when FRED reports a bad event type

 - Add a FRED-specific INT80 handler without the special dances that
   need to happen in the current one

 - Enable the using-the-default-return-thunk-but-you-should-not warning
   only on configs which actually enable those special return thunks

 - Check the proper feature flags when selecting BHI retpoline
   mitigation

* tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
  x86/fred: Fix incorrect error code printout in fred_bad_type()
  x86/fred: Fix INT80 emulation for FRED
  x86/retpolines: Enable the default thunk warning only on relevant configs
  x86/bugs: Fix BHI retpoline check

Pull block fixes from Jens Axboe:
 "Just two minor fixes that should go into the 6.9 kernel release, one
  fixing a regression with partition scanning errors, and one fixing a
  WARN_ON() that can get triggered if we race with a timer"

* tag 'block-6.9-20240420' of git://git.kernel.dk/linux:
  blk-iocost: do not WARN if iocg was already offlined
  block: propagate partition scanning errors to the BLKRRPART ioctl

Pull email address update from James Bottomley:
 "My IBM email has stopped working, so update to a working email
  address"

* tag 'email' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  MAINTAINERS: update to working email address

Pull kvm fixes from Paolo Bonzini:
 "This is a bit on the large side, mostly due to two changes:

   - Changes to disable some broken PMU virtualization (see below for
     details under "x86 PMU")

   - Clean up SVM's enter/exit assembly code so that it can be compiled
     without OBJECT_FILES_NON_STANDARD. This fixes a warning "Unpatched
     return thunk in use. This should not happen!" when running KVM
     selftests.

  Everything else is small bugfixes and selftest changes:

   - Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure
     where KVM would allow userspace to refresh the cache with a bogus
     GPA. The bug has existed for quite some time, but was exposed by a
     new sanity check added in 6.9 (to ensure a cache is either
     GPA-based or HVA-based).

   - Drop an unused param from gfn_to_pfn_cache_invalidate_start() that
     got left behind during a 6.9 cleanup.

   - Fix a math goof in x86's hugepage logic for
     KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow
     (detected by KASAN).

   - Fix a bug where KVM incorrectly clears root_role.direct when
     userspace sets guest CPUID.

   - Fix a dirty logging bug in the where KVM fails to write-protect
     SPTEs used by a nested guest, if KVM is using Page-Modification
     Logging and the nested hypervisor is NOT using EPT.

  x86 PMU:

   - Drop support for virtualizing adaptive PEBS, as KVM's
     implementation is architecturally broken without an obvious/easy
     path forward, and because exposing adaptive PEBS can leak host LBRs
     to the guest, i.e. can leak host kernel addresses to the guest.

   - Set the enable bits for general purpose counters in
     PERF_GLOBAL_CTRL at RESET time, as done by both Intel and AMD
     processors.

   - Disable LBR virtualization on CPUs that don't support LBR
     callstacks, as KVM unconditionally uses
     PERF_SAMPLE_BRANCH_CALL_STACK when creating the perf event, and
     would fail on such CPUs.

  Tests:

   - Fix a flaw in the max_guest_memory selftest that results in it
     exhausting the supply of ucall structures when run with more than
     256 vCPUs.

   - Mark KVM_MEM_READONLY as supported for RISC-V in
     set_memory_region_test"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
  KVM: Drop unused @may_block param from gfn_to_pfn_cache_invalidate_start()
  KVM: selftests: Add coverage of EPT-disabled to vmx_dirty_log_test
  KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting
  KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}()
  KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
  KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
  KVM: VMX: Disable LBR virtualization if the CPU doesn't support LBR callstacks
  perf/x86/intel: Expose existence of callback support to KVM
  KVM: VMX: Snapshot LBR capabilities during module initialization
  KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
  KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
  KVM: x86: Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD
  KVM: SVM: Create a stack frame in __svm_sev_es_vcpu_run()
  KVM: SVM: Save/restore args across SEV-ES VMRUN via host save area
  KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area
  KVM: SVM: Clobber RAX instead of RBX when discarding spec_ctrl_intercepted
  KVM: SVM: Drop 32-bit "support" from __svm_sev_es_vcpu_run()
  KVM: SVM: Wrap __svm_sev_es_vcpu_run() with #ifdef CONFIG_KVM_AMD_SEV
  KVM: SVM: Create a stack frame in __svm_vcpu_run() for unwinding
  KVM: SVM: Remove a useless zeroing of allocated memory
  ...

Pull powerpc fixes from Michael Ellerman:

 - Fix wireguard loading failure on pre-Power10 due to Power10 crypto
   routines

 - Fix papr-vpd selftest failure due to missing variable initialization

 - Avoid unnecessary get/put in spapr_tce_platform_iommu_attach_dev()

Thanks to Geetika Moolchandani, Jason Gunthorpe, Michal Suchánek, Nathan
Lynch, and Shivaprasad G Bhat.

* tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc/papr-vpd: Fix missing variable initialization
  powerpc/crypto/chacha-p10: Fix failure on non Power10
  powerpc/iommu: Refactor spapr_tce_platform_iommu_attach_dev()

Pull clk fixes from Stephen Boyd:
 "A couple clk driver fixes, a build fix, and a deadlock fix:

   - Mediatek mt7988 has broken PCIe because the wrong parent is used

   - Mediatek clk drivers may deadlock when registering their clks
     because the clk provider device is repeatedly runtime PM resumed
     and suspended during probe and clk registration.

     Resuming the clk provider device deadlocks with an ABBA deadlock
     due to genpd_lock and the clk prepare_lock. The fix is to keep the
     device runtime resumed while registering clks.

   - Another runtime PM related deadlock, this time with disabling
     unused clks during late init.

     We get an ABBA deadlock where a device is runtime PM resuming (or
     suspending) while the disabling of unused clks is happening in
     parallel. That runtime PM action calls into the clk framework and
     tries to grab the clk prepare_lock while the disabling of unused
     clks holds the prepare_lock and is waiting for that runtime PM
     action to complete.

     The fix is to runtime resume all the clk provider devices before
     grabbing the clk prepare_lock during disable unused.

   - A build fix to provide an empty devm_clk_rate_exclusive_get()
     function when CONFIG_COMMON_CLK=n"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port
  clk: mediatek: Do a runtime PM get on controllers during probe
  clk: Get runtime PM before walking tree for clk_summary
  clk: Get runtime PM before walking tree during disable_unused
  clk: Initialize struct clk_core kref earlier
  clk: Don't hold prepare_lock when calling kref_put()
  clk: Remove prepare_lock hold assertion in __clk_release()
  clk: Provide !COMMON_CLK dummy for devm_clk_rate_exclusive_get()

jejb@linux.ibm.com no longer works.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

Merge tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
 "A random set of small bug fixes:

   - Fix perf annotate TUI when used with data type profiling

   - Work around BPF verifier about sighand lock checking

  And a set of kernel header synchronization"

* tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  tools/include: Sync arm64 asm/cputype.h with the kernel sources
  tools/include: Sync asm-generic/bitops/fls.h with the kernel sources
  tools/include: Sync x86 asm/msr-index.h with the kernel sources
  tools/include: Sync x86 asm/irq_vectors.h with the kernel sources
  tools/include: Sync x86 CPU feature headers with the kernel sources
  tools/include: Sync uapi/sound/asound.h with the kernel sources
  tools/include: Sync uapi/linux/kvm.h and asm/kvm.h with the kernel sources
  tools/include: Sync uapi/linux/fs.h with the kernel sources
  tools/include: Sync uapi/drm/i915_drm.h with the kernel sources
  perf lock contention: Add a missing NULL check
  perf annotate: Make sure to call symbol__annotate2() in TUI

Pull hardening fixes from Kees Cook:

 - Correctly disable UBSAN configs in configs/hardening (Nathan
   Chancellor)

 - Add missing signed integer overflow trap types to arm64 handler

* tag 'hardening-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ubsan: Add awareness of signed integer overflow traps
  configs/hardening: Disable CONFIG_UBSAN_SIGNED_WRAP
  configs/hardening: Fix disabling UBSAN configurations

Pull iommufd fixes from Jason Gunthorpe:
 "Two fixes for the selftests:

   - CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work

   - The kconfig fragment sshould include fault injection so the fault
     injection test can work"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd: Add config needed for iommufd_fail_nth
  iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest

Pull rdma fixes from Jason Gunthorpe:

 - Add a missing mutex_destroy() in rxe

 - Enhance the debugging print for cm_destroy failures to help debug
   these

 - Fix mlx5 MAD processing in cases where multiport devices are running
   in switchedev mode

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/mlx5: Fix port number for counter query in multi-port configuration
  RDMA/cm: Print the old state when cm_destroy_id gets timeout
  RDMA/rxe: Fix the problem "mutex_destroy missing"

Pull fs/9p fixes from Eric Van Hensbergen:
 "This contains a reversion of one of the original 6.9 patches which
  seems to have been the cause of most of the instability. It also
  incorporates several fixes to legacy support and cache fixes.

  There are few additional changes to improve stability, but I want
  another week of testing before sending them upstream"

* tag '9p-fixes-for-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: drop inodes immediately on non-.L too
  fs/9p: Revert "fs/9p: fix dups even in uncached mode"
  fs/9p: remove erroneous nlink init from legacy stat2inode
  9p: explicitly deny setlease attempts
  fs/9p: fix the cache always being enabled on files with qid flags
  fs/9p: translate O_TRUNC into OTRUNC
  fs/9p: only translate RWX permissions for plain 9P2000

Pull fuse fixes from Miklos Szeredi:

 - Fix two bugs in the new passthrough mode

 - Fix a statx bug introduced in v6.6

 - Fix code documentation

* tag 'fuse-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  cuse: add kernel-doc comments to cuse_process_init_reply()
  fuse: fix leaked ENOSYS error on first statx call
  fuse: fix parallel dio write on file open in passthrough mode
  fuse: fix wrong ff->iomode state changes from parallel dio write

Pull arm64 fixes from Catalin Marinas:

 - Fix a kernel fault during page table walking in huge_pte_alloc() with
   PTABLE_LEVELS=5 due to using p4d_offset() instead of p4d_alloc()

 - head.S fix and cleanup to disable the MMU before toggling the
   HCR_EL2.E2H bit when entering the kernel with the MMU on from the EFI
   stub. Changing this bit (currently from VHE to nVHE) causes some
   system registers as well as page table descriptors to be interpreted
   differently, potentially resulting in spurious MMU faults

 - Fix translation fault in swsusp_save() accessing MEMBLOCK_NOMAP
   memory ranges due to kernel_page_present() returning true in most
   configurations other than rodata_full == true,
   CONFIG_DEBUG_PAGEALLOC=y or CONFIG_KFENCE=y

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: hibernate: Fix level3 translation fault in swsusp_save()
  arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H
  arm64/head: Drop unnecessary pre-disable-MMU workaround
  arm64/hugetlb: Fix page table walk in huge_pte_alloc()

Pull s390 updates from Alexander Gordeev:

 - Fix NULL pointer dereference in program check handler

 - Fake IRBs are important events relevant for problem analysis. Add
   traces when queueing and delivering

 - Fix a race condition in ccw_device_set_online() that can cause the
   online process to fail

 - Deferred condition code 1 response indicates that I/O was not started
   and should be retried. The current QDIO implementation handles a cc1
   response as an error, resulting in a failed QDIO setup. Fix that by
   retrying the setup when a cc1 response is received

* tag 's390-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: Fix NULL pointer dereference
  s390/cio: log fake IRB events
  s390/cio: fix race condition during online processing
  s390/qdio: handle deferred cc1

Merge tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull bootconfig fixes from Masami Hiramatsu:

 - Fix potential static_command_line buffer overrun.

   Currently we allocate the memory for static_command_line based on
   "boot_command_line", but it will copy "command_line" into it. So we
   use the length of "command_line" instead of "boot_command_line" (as
   we previously did)

 - Use memblock_free_late() in xbc_exit() instead of memblock_free()
   after the buddy system is initialized

 - Fix a kerneldoc warning

* tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  bootconfig: Fix the kerneldoc of _xbc_exit()
  bootconfig: use memblock_free_late to free xbc memory to buddy
  init/main.c: Fix potential static_command_line memory overflow

Pull thermal control fix from Rafael Wysocki:
 "This prevents the thermal debug code from attempting to divide by zero
  and corrects trip point statistics (Rafael Wysocki)"

* tag 'thermal-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up()

Pull sound fixes from Takashi Iwai:
 "Things look calm and normal, we got handful HD-audio-related small
  fixes and a fix for MIDI 2.0 UMP handling"

* tag 'sound-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messages
  ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VC
  ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9N
  ALSA: hda/realtek: Fix volumn control of ThinkBook 16P Gen4
  ALSA: hda/realtek: Fixes for Asus GU605M and GA403U sound
  ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1
  ALSA: hda/tas2781: correct the register for pow calibrated data
  ALSA: hda/realtek: Add quirk for HP SnowWhite laptops

Pull drm fixes from Dave Airlie:
 "Regular week of fixes, seems to be about right for this time in the
  release cycle, amdgpu, and nouveau are the main one with some
  scattered fixes otherwise.

  ttm:
   - Stop pooling cached NUMA pages

  amdgpu:
   - Fix invalid resource->start check
   - USB-C DSC fix
   - Fix a potential UAF in VA IOCTL
   - Fix visible VRAM handling during faults

  amdkfd:
   - Fix memory leak in create_process failure

  radeon:
   - Silence UBSAN warnings from variable sized arrays

  nouveau:
   - dp: Don't probe DP ports twice
   - nv04: Fix OOB access
   - nv50: Disable AUX bus for disconnected DP ports
   - nvkm: Fix instmem race condition

  panel:
   - Don't unregister DSI devices in several drivers

  v3d:
   - Fix enabled_ns increment

  xe:
   - Fix bo leak on error path during fb init
   - Fix use-after-free due to order vm is put and destroyed"

* tag 'drm-fixes-2024-04-19' of https://gitlab.freedesktop.org/drm/kernel:
  drm/radeon: silence UBSAN warning (v3)
  drm/radeon: make -fstrict-flex-arrays=3 happy
  drm/amdgpu: fix visible VRAM handling during faults
  drm/amdgpu: validate the parameters of bo mapping operations more clearly
  Revert "drm/amd/display: fix USB-C flag update after enc10 feature init"
  drm/amdkfd: Fix memory leak in create_process failure
  drm/amdgpu: remove invalid resource->start check v2
  drm/xe/vm: prevent UAF with asid based lookup
  drm/xe: Fix bo leak in intel_fb_bo_framebuffer_init
  drm/panel: novatek-nt36682e: don't unregister DSI device
  drm/panel: visionox-rm69299: don't unregister DSI device
  drm/nouveau/dp: Don't probe eDP ports twice harder
  drm/nouveau/kms/nv50-: Disable AUX bus for disconnected DP ports
  drm/v3d: Don't increment `enabled_ns` twice
  drm/vmwgfx: Sort primary plane formats by order of preference
  drm/vmwgfx: Fix crtc's atomic check conditional
  drm/vmwgfx: Fix prime import/export
  drm/ttm: stop pooling cached NUMA pages v2
  drm: nv04: Fix out of bounds access
  nouveau: fix instmem race condition around ptr stores

Merge tag 'mm-hotfixes-stable-2024-04-18-14-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "15 hotfixes. 9 are cc:stable and the remainder address post-6.8 issues
  or aren't considered suitable for backporting.

  There are a significant number of fixups for this cycle's page_owner
  changes (series "page_owner: print stacks and their outstanding
  allocations"). Apart from that, singleton changes all over, mainly in
  MM"

* tag 'mm-hotfixes-stable-2024-04-18-14-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix OOB in nilfs_set_de_type
  MAINTAINERS: update Naoya Horiguchi's email address
  fork: defer linking file vma until vma is fully initialized
  mm/shmem: inline shmem_is_huge() for disabled transparent hugepages
  mm,page_owner: defer enablement of static branch
  Squashfs: check the inode number is not the invalid value of zero
  mm,swapops: update check in is_pfn_swap_entry for hwpoison entries
  mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled
  mm/userfaultfd: allow hugetlb change protection upon poison entry
  mm,page_owner: fix printing of stack records
  mm,page_owner: fix accounting of pages when migrating
  mm,page_owner: fix refcount imbalance
  mm,page_owner: update metadata for tail pages
  userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE
  mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly