commit 62a6cfdd upstream.

commit 4fcd1813 ("Fix reconnect to not defer smb3 session reconnect
long after socket reconnect") added support for Negotiate requests to
be initiated by echo calls.

To avoid delays in calling echo after a reconnect, I added the patch
introduced by the commit b8c60012 ("Call echo service immediately
after socket reconnect").

This has however caused a regression with cifs shares which do not have
support for echo calls to trigger Negotiate requests. On connections
which need to call Negotiation, the echo calls trigger an error which
triggers a reconnect which in turn triggers another echo call. This
results in a loop which is only broken when an operation is performed on
the cifs share. For an idle share, it can DOS a server.

The patch uses the smb_operation can_echo() for cifs so that it is
called only if connection has been already been setup.

kernel bz: 194531
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fc280fe8 upstream.

Commit 6afcf8ef ("mm, compaction: fix NR_ISOLATED_* stats for pfn
based migration") moved the dec_node_page_state() call (along with the
page_is_file_cache() call) to after putback_lru_page().

But page_is_file_cache() can change after putback_lru_page() is called,
so it should be called before putback_lru_page(), as it was before that
patch, to prevent NR_ISOLATE_* stats from going negative.

Without this fix, non-CONFIG_SMP kernels end up hanging in the
while(too_many_isolated()) { congestion_wait() } loop in
shrink_active_list() due to the negative stats.

 Mem-Info:
  active_anon:32567 inactive_anon:121 isolated_anon:1
  active_file:6066 inactive_file:6639 isolated_file:4294967295
                                                    ^^^^^^^^^^
  unevictable:0 dirty:115 writeback:0 unstable:0
  slab_reclaimable:2086 slab_unreclaimable:3167
  mapped:3398 shmem:18366 pagetables:1145 bounce:0
  free:1798 free_pcp:13 free_cma:0

Fixes: 6afcf8ef ("mm, compaction: fix NR_ISOLATED_* stats for pfn based migration")
Link: http://lkml.kernel.org/r/1492683865-27549-1-git-send-email-rabin.vincent@axis.comSigned-off-by: Rabin Vincent <rabinv@axis.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ming Ling <ming.ling@spreadtrum.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 78f7a45d upstream.

I noticed that reading the snapshot file when it is empty no longer gives a
status. It suppose to show the status of the snapshot buffer as well as how
to allocate and use it. For example:

 ># cat snapshot
 # tracer: nop
 #
 #
 # * Snapshot is allocated *
 #
 # Snapshot commands:
 # echo 0 > snapshot : Clears and frees snapshot buffer
 # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
 #                      Takes a snapshot of the main buffer.
 # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
 #                      (Doesn't have to be '2' works with any number that
 #                       is not a '0' or '1')

But instead it just showed an empty buffer:

 ># cat snapshot
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 0/0   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |

What happened was that it was using the ring_buffer_iter_empty() function to
see if it was empty, and if it was, it showed the status. But that function
was returning false when it was empty. The reason was that the iter header
page was on the reader page, and the reader page was empty, but so was the
buffer itself. The check only tested to see if the iter was on the commit
page, but the commit page was no longer pointing to the reader page, but as
all pages were empty, the buffer is also.

Fixes: 651e22f2 ("ring-buffer: Always reset iterator to reader page")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 286f3f47 upstream.

Because HID_DG_TOOLSERIALNUMBER doesn't first cast the value recieved from HID
to an unsigned type, sign-extension rules can cause the value of
wacom_wac->serial[0] to inadvertently wind up with all 32 of its highest bits
set if the highest bit of "value" was set.

This can cause problems for Tablet PC devices which use AES sensors and the
xf86-input-wacom userspace driver. It is not uncommon for AES sensors to send a
serial number of '0' while the pen is entering or leaving proximity. The
xf86-input-wacom driver ignores events with a serial number of '0' since it
cannot match them up to an in-use tool.  To ensure the xf86-input-wacom driver
does not ignore the final out-of-proximity event, the kernel does not send
MSC_SERIAL events when the value of wacom_wac->serial[0] is '0'. If the highest
bit of HID_DG_TOOLSERIALNUMBER is set by an in-prox pen which later leaves
proximity and sends a '0' for HID_DG_TOOLSERIALNUMBER, then only the lowest 32
bits of wacom_wac->serial[0] are actually cleared, causing the kernel to send
an MSC_SERIAL event. Since the 'input_event' function takes an 'int' as
argument, only those lowest (now-cleared) 32 bits of wacom_wac->serial[0] are
sent to userspace, causing xf86-input-wacom to ignore the event. If the event
was the final out-of-prox event, then xf86-input-wacom may remain in a state
where it believes the pen is in proximity and refuses to allow other devices
under its control (e.g. the touchscreen) to move the cursor.

It should be noted that EMR devices and devices which use both the
HID_DG_TOOLSERIALNUMBER and WACOM_HID_WD_SERIALHI usages (in that order) would
be immune to this issue. It appears only AES devices are affected.

Fixes: f85c9dc6 ("HID: wacom: generic: Support tool ID and additional tool types")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit df62db5b upstream.

Currently the snapshot trigger enables the probe and then allocates the
snapshot. If the probe triggers before the allocation, it could cause the
snapshot to fail and turn tracing off. It's best to allocate the snapshot
buffer first, and then enable the trigger. If something goes wrong in the
enabling of the trigger, the snapshot buffer is still allocated, but it can
also be freed by the user by writting zero into the snapshot buffer file.

Also add a check of the return status of alloc_snapshot().

Fixes: 77fd5c15 ("tracing: Add snapshot trigger to function probes")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c9f838d1 upstream.

This fixes CVE-2017-7472.

Running the following program as an unprivileged user exhausts kernel
memory by leaking thread keyrings:

	#include <keyutils.h>

	int main()
	{
		for (;;)
			keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_THREAD_KEYRING);
	}

Fix it by only creating a new thread keyring if there wasn't one before.
To make things more consistent, make install_thread_keyring_to_cred()
and install_process_keyring_to_cred() both return 0 if the corresponding
keyring is already present.

Fixes: d84f4f99 ("CRED: Inaugurate COW credentials")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c1644fe0 upstream.

This fixes CVE-2017-6951.

Userspace should not be able to do things with the "dead" key type as it
doesn't have some of the helper functions set upon it that the kernel
needs.  Attempting to use it may cause the kernel to crash.

Fix this by changing the name of the type to ".dead" so that it's rejected
up front on userspace syscalls by key_get_type_from_user().

Though this doesn't seem to affect recent kernels, it does affect older
ones, certainly those prior to:

	commit c06cfb08
	Author: David Howells <dhowells@redhat.com>
	Date:   Tue Sep 16 17:36:06 2014 +0100
	KEYS: Remove key_type::match in favour of overriding default by match_preparse

which went in before 3.18-rc1.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ee8f844e upstream.

This fixes CVE-2016-9604.

Keyrings whose name begin with a '.' are special internal keyrings and so
userspace isn't allowed to create keyrings by this name to prevent
shadowing.  However, the patch that added the guard didn't fix
KEYCTL_JOIN_SESSION_KEYRING.  Not only can that create dot-named keyrings,
it can also subscribe to them as a session keyring if they grant SEARCH
permission to the user.

This, for example, allows a root process to set .builtin_trusted_keys as
its session keyring, at which point it has full access because now the
possessor permissions are added.  This permits root to add extra public
keys, thereby bypassing module verification.

This also affects kexec and IMA.

This can be tested by (as root):

	keyctl session .builtin_trusted_keys
	keyctl add user a a @s
	keyctl list @s

which on my test box gives me:

	2 keys in keyring:
	180010936: ---lswrv     0     0 asymmetric: Build time autogenerated kernel key: ae3d4a31b82daa8e1a75b49dc2bba949fd992a05
	801382539: --alswrv     0     0 user: a


Fix this by rejecting names beginning with a '.' in the keyctl.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
cc: linux-ima-devel@lists.sourceforge.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c4baad50 upstream.

put_chars() stuffs the buffer it gets into an sg, but that buffer may be
on the stack. This breaks with CONFIG_VMAP_STACK=y (for me, it
manifested as printks getting turned into NUL bytes).
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3f190e3a upstream.

Commit 17ce039b ("[media] cxusb: don't do DMA on stack")
added a kmalloc'ed bounce buffer for writes, but missed to do the same
for reads. As the read only happens after the write is finished, we can
reuse the same buffer.

As dvb_usb_generic_rw handles a read length of 0 by itself, avoid calling
it using the dvb_usb_generic_read wrapper function.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a4866aa8 upstream.

Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is
disallowed. However, on x86, the first 1MB was always allowed for BIOS
and similar things, regardless of it actually being System RAM. It was
possible for heap to end up getting allocated in low 1MB RAM, and then
read by things like x86info or dd, which would trip hardened usercopy:

usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes)

This changes the x86 exception for the low 1MB by reading back zeros for
System RAM areas instead of blindly allowing them. More work is needed to
extend this to mmap, but currently mmap doesn't go through usercopy, so
hardened usercopy won't Oops the kernel.
Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5fa40869 upstream.

Accessing the registers of the RTC block on Tegra requires the module
clock to be enabled. This only works because the RTC module clock will
be enabled by default during early boot. However, because the clock is
unused, the CCF will disable it at late_init time. This causes the RTC
to become unusable afterwards. This can easily be reproduced by trying
to use the RTC:

	$ hwclock --rtc /dev/rtc1

This will hang the system. I ran into this by following up on a report
by Martin Michlmayr that reboot wasn't working on Tegra210 systems. It
turns out that the rtc-tegra driver's ->shutdown() implementation will
hang the CPU, because of the disabled clock, before the system can be
rebooted.

What confused me for a while is that the same driver is used on prior
Tegra generations where the hang can not be observed. However, as Peter
De Schrijver pointed out, this is because on 32-bit Tegra chips the RTC
clock is enabled by the tegra20_timer.c clocksource driver, which uses
the RTC to provide a persistent clock. This code is never enabled on
64-bit Tegra because the persistent clock infrastructure does not exist
on 64-bit ARM.

The proper fix for this is to add proper clock handling to the RTC
driver in order to ensure that the clock is enabled when the driver
requires it. All device trees contain the clock already, therefore
no additional changes are required.
Reported-by: Martin Michlmayr <tbm@cyrius.com>
Acked-By Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c3a696b6 upstream.

When GPE is not enabled, it is not efficient to use the wait polling mode
as it introduces an unexpected scheduler delay.
So before the GPE handler is installed, this patch uses busy polling mode
for all EC(s) and the logic can be applied to non boot EC(s) during the
suspend/resume process.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=191561Tested-by: Jakobus Schurz <jakobus.schurz@gmail.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cc272163 upstream.

This patch fixes the following warning message seen when booting the
kernel as Dom0 with Xen on Intel machines.

[0.003000] [Firmware Bug]: CPU1: APIC id mismatch. Firmware: 0 APIC: 1]

The code generating the warning in validate_apic_and_package_id() matches
cpu_data(cpu).apicid (initialized in init_intel()->
detect_extended_topology() using cpuid) against the apicid returned from
xen_apic_read(). Now, xen_apic_read() makes a hypercall to retrieve apicid
for the boot  cpu but returns 0 otherwise. Hence the warning gets thrown
for all but the boot cpu.

The idea behind xen_apic_read() returning 0 for apicid is that the
guests (even Dom0) should not need to know what physical processor their
vcpus are running on. This is because we currently  do not have topology
information in Xen and also because xen allows more vcpus than physical
processors. However, boot cpu's apicid is required for loading
xen-acpi-processor driver on AMD machines. Look at following patch for
details:

commit 558daa28 ("xen/apic: Return the APIC ID (and version) for CPU
0.")

So to get rid of the warning, this patch modifies
xen_cpu_present_to_apicid() to return cpu_data(cpu).apicid instead of
calling xen_apic_read().

The warning is not seen on AMD machines because init_amd() populates
cpu_data(cpu).apicid by calling hard_smp_processor_id()->xen_apic_read()
as opposed to using apicid from cpuid as is done on Intel machines.
Signed-off-by: Mohit Gambhir <mohit.gambhir@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 98d610c3 upstream.

The accelerometer event relies on the ACERWMID_EVENT_GUID notify.
So, this patch changes the codes to setup accelerometer input device
when detected ACERWMID_EVENT_GUID. It avoids that the accel input
device created on every Acer machines.

In addition, patch adds a clearly parsing logic of accelerometer hid
to acer_wmi_get_handle_cb callback function. It is positive matching
the "SENR" name with "BST0001" device to avoid non-supported hardware.
Reported-by: Bjørn Mork <bjorn@mork.no>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
[andy: slightly massage commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ebf79091 upstream.

Select DW_DMAC_CORE like the rest of glue drivers do, e.g.
drivers/dma/dw/Kconfig.

While here group selectors under SND_SOC_INTEL_HASWELL and
SND_SOC_INTEL_BAYTRAIL.

Make platforms, which are using a common SST firmware driver, to be
dependent on DMADEVICES.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 00514537 upstream.

I ran into a stack frame size warning because of the on-stack copy of
the USB device structure:

drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_disconnect':
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:1029:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Copying a device structure like this is wrong for a number of other reasons
too aside from the possible stack overflow. One of them is that the
dev_info() call will print the name of the device later, but AFAICT
we have only copied a pointer to the name earlier and the actual name
has been freed by the time it gets printed.

This removes the on-stack copy of the device and instead copies the
device name using kstrdup(). I'm ignoring the possible failure here
as both printk() and kfree() are able to deal with NULL pointers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3f795cef upstream.

This fixes a bug in which the upper 32-bits of a 64-bit value which is
read by get_user() was lost on a 32-bit kernel.
While touching this code, split out pre-loading of %sr2 space register
and clean up code indent.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4702bbee upstream.

When we get an EINPROGRESS completion in lrw, we will end up marking
the request as done and freeing it.  This then blows up when the
request is really completed as we've already freed the memory.

Fixes: 700cb3f5 ("crypto: lrw - Convert to skcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ef0579b6 upstream.

The ahash API modifies the request's callback function in order
to clean up after itself in some corner cases (unaligned final
and missing finup).

When the request is complete ahash will restore the original
callback and everything is fine.  However, when the request gets
an EBUSY on a full queue, an EINPROGRESS callback is made while
the request is still ongoing.

In this case the ahash API will incorrectly call its own callback.

This patch fixes the problem by creating a temporary request
object on the stack which is used to relay EINPROGRESS back to
the original completion function.

This patch also adds code to preserve the original flags value.

Fixes: ab6bf4e5 ("crypto: hash - Fix the pointer voodoo in...")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit aa4a829b upstream.

When we get an EINPROGRESS completion in xts, we will end up marking
the request as done and freeing it.  This then blows up when the
request is really completed as we've already freed the memory.

Fixes: f1c131b4 ("crypto: xts - Convert to skcipher")
Reported-by: Nathan Royce <nroycea+kernel@gmail.com>
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e6534aeb upstream.

The algif_aead completion function tries to deduce the aead_request
from the crypto_async_request argument.  This is broken because
the API does not guarantee that the same request will be pased to
the completion function.  Only the value of req->data can be used
in the completion function.

This patch fixes it by storing a pointer to sk in areq and using
that instead of passing in sk through req->data.

Fixes: 83094e5e ("crypto: af_alg - add async support to...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d879d0b8 upstream.

When function tracer has a pid filter, it adds a probe to sched_switch
to track if current task can be ignored.  The probe checks the
ftrace_ignore_pid from current tr to filter tasks.  But it misses to
delete the probe when removing an instance so that it can cause a crash
due to the invalid tr pointer (use-after-free).

This is easily reproducible with the following:

  # cd /sys/kernel/debug/tracing
  # mkdir instances/buggy
  # echo $$ > instances/buggy/set_ftrace_pid
  # rmdir instances/buggy

  ============================================================================
  BUG: KASAN: use-after-free in ftrace_filter_pid_sched_switch_probe+0x3d/0x90
  Read of size 8 by task kworker/0:1/17
  CPU: 0 PID: 17 Comm: kworker/0:1 Tainted: G    B           4.11.0-rc3  #198
  Call Trace:
   dump_stack+0x68/0x9f
   kasan_object_err+0x21/0x70
   kasan_report.part.1+0x22b/0x500
   ? ftrace_filter_pid_sched_switch_probe+0x3d/0x90
   kasan_report+0x25/0x30
   __asan_load8+0x5e/0x70
   ftrace_filter_pid_sched_switch_probe+0x3d/0x90
   ? fpid_start+0x130/0x130
   __schedule+0x571/0xce0
   ...

To fix it, use ftrace_clear_pids() to unregister the probe.  As
instance_rmdir() already updated ftrace codes, it can just free the
filter safely.

Link: http://lkml.kernel.org/r/20170417024430.21194-2-namhyung@kernel.org

Fixes: 0c8916c3 ("tracing: Add rmdir to remove multibuffer instances")
Cc: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d72e9a7a upstream.

The copy_page is optimized memcpy for page-alinged address.  If it is
used with non-page aligned address, it can corrupt memory which means
system corruption.  With zram, it can happen with

1. 64K architecture
2. partial IO
3. slub debug

Partial IO need to allocate a page and zram allocates it via kmalloc.
With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned
address.  And finally, copy_page(mem, cmem) corrupts memory.

So, this patch changes it to memcpy.

Actuaully, we don't need to change zram_bvec_write part because zsmalloc
returns page-aligned address in case of PAGE_SIZE class but it's not
good to rely on the internal of zsmalloc.

Note:
 When this patch is merged to stable, clear_page should be fixed, too.
 Unfortunately, recent zram removes it by "same page merge" feature so
 it's hard to backport this patch to -stable tree.

I will handle it when I receive the mail from stable tree maintainer to
merge this patch to backport.

Fixes: 42e99bd9 ("zram: optimize memory operations with clear_page()/copy_page()")
Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.orgSigned-off-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit b576c583 which is
commit 6c356eda upstream.

It shouldn't have been included in a stable release.
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f2cfa58b upstream.

Without a bool string present, using "# CONFIG_DEVPORT is not set" in
defconfig files would not actually unset devport. This esnured that
/dev/port was always on, but there are reasons a user may wish to
disable it (smaller kernel, attack surface reduction) if it's not being
used. Adding a message here in order to make this user visible.
Signed-off-by: Max Bires <jbires@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a34f8363 upstream.

Fix wrong initial csb read pointer value. This fixes the random
engine timeout issue in guest when guest boots up.

Fixes: 8453d674 ("drm/i915/gvt: vGPU execlist virtualization")
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 82cc4fc2 upstream.

When two function probes are added to set_ftrace_filter, and then one of
them is removed, the update to the function locations is not performed, and
the record keeping of the function states are corrupted, and causes an
ftrace_bug() to occur.

This is easily reproducable by adding two probes, removing one, and then
adding it back again.

 # cd /sys/kernel/debug/tracing
 # echo schedule:traceoff > set_ftrace_filter
 # echo do_IRQ:traceoff > set_ftrace_filter
 # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter
 # echo do_IRQ:traceoff > set_ftrace_filter

Causes:
 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 1098 at kernel/trace/ftrace.c:2369 ftrace_get_addr_curr+0x143/0x220
 Modules linked in: [...]
 CPU: 2 PID: 1098 Comm: bash Not tainted 4.10.0-test+ #405
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
 Call Trace:
  dump_stack+0x68/0x9f
  __warn+0x111/0x130
  ? trace_irq_work_interrupt+0xa0/0xa0
  warn_slowpath_null+0x1d/0x20
  ftrace_get_addr_curr+0x143/0x220
  ? __fentry__+0x10/0x10
  ftrace_replace_code+0xe3/0x4f0
  ? ftrace_int3_handler+0x90/0x90
  ? printk+0x99/0xb5
  ? 0xffffffff81000000
  ftrace_modify_all_code+0x97/0x110
  arch_ftrace_update_code+0x10/0x20
  ftrace_run_update_code+0x1c/0x60
  ftrace_run_modify_code.isra.48.constprop.62+0x8e/0xd0
  register_ftrace_function_probe+0x4b6/0x590
  ? ftrace_startup+0x310/0x310
  ? debug_lockdep_rcu_enabled.part.4+0x1a/0x30
  ? update_stack_state+0x88/0x110
  ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
  ? preempt_count_sub+0x18/0xd0
  ? mutex_lock_nested+0x104/0x800
  ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
  ? __unwind_start+0x1c0/0x1c0
  ? _mutex_lock_nest_lock+0x800/0x800
  ftrace_trace_probe_callback.isra.3+0xc0/0x130
  ? func_set_flag+0xe0/0xe0
  ? __lock_acquire+0x642/0x1790
  ? __might_fault+0x1e/0x20
  ? trace_get_user+0x398/0x470
  ? strcmp+0x35/0x60
  ftrace_trace_onoff_callback+0x48/0x70
  ftrace_regex_write.isra.43.part.44+0x251/0x320
  ? match_records+0x420/0x420
  ftrace_filter_write+0x2b/0x30
  __vfs_write+0xd7/0x330
  ? do_loop_readv_writev+0x120/0x120
  ? locks_remove_posix+0x90/0x2f0
  ? do_lock_file_wait+0x160/0x160
  ? __lock_is_held+0x93/0x100
  ? rcu_read_lock_sched_held+0x5c/0xb0
  ? preempt_count_sub+0x18/0xd0
  ? __sb_start_write+0x10a/0x230
  ? vfs_write+0x222/0x240
  vfs_write+0xef/0x240
  SyS_write+0xab/0x130
  ? SyS_read+0x130/0x130
  ? trace_hardirqs_on_caller+0x182/0x280
  ? trace_hardirqs_on_thunk+0x1a/0x1c
  entry_SYSCALL_64_fastpath+0x18/0xad
 RIP: 0033:0x7fe61c157c30
 RSP: 002b:00007ffe87890258 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: ffffffff8114a410 RCX: 00007fe61c157c30
 RDX: 0000000000000010 RSI: 000055814798f5e0 RDI: 0000000000000001
 RBP: ffff8800c9027f98 R08: 00007fe61c422740 R09: 00007fe61ca53700
 R10: 0000000000000073 R11: 0000000000000246 R12: 0000558147a36400
 R13: 00007ffe8788f160 R14: 0000000000000024 R15: 00007ffe8788f15c
  ? trace_hardirqs_off_caller+0xc0/0x110
 ---[ end trace 99fa09b3d9869c2c ]---
 Bad trampoline accounting at: ffffffff81cc3b00 (do_IRQ+0x0/0x150)

Fixes: 59df055f ("ftrace: trace different functions with a different tracer")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 75eb5e1e upstream.

The raw_spinlock in the IMX GPCV2 interupt chip is not initialized before
usage. That results in a lockdep splat:

  INFO: trying to register non-static key.
  the code is fine but needs lockdep annotation.
  turning off the locking correctness validator.

Add the missing raw_spin_lock_init() to the setup code.

Fixes: e324c4dc ("irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources")
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Cc: jason@lakedaemon.net
Cc: marc.zyngier@arm.com
Cc: shawnguo@kernel.org
Cc: andrew.smirnov@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170413222731.5917-1-tyler.baker@linaro.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c4a3fa26 upstream.

There is a report that after commit 27622b06 ("cpufreq: Convert
to hotplug state machine"), the normal CPU offline/online cycle
fails on some platforms.

According to the ftrace result, this problem was triggered on
platforms using acpi-cpufreq as the default cpufreq driver,
and due to the lack of some ACPI freq method (eg. _PCT),
cpufreq_online() failed and returned a negative value, so the CPU
hotplug state machine rolled back the CPU online process.  Actually,
from the user's perspective, the failure of cpufreq_online() should
not prevent that CPU from being brought up, although cpufreq might
not work on that CPU.

BTW, during system startup cpufreq_online() is not invoked via CPU
online but by the cpufreq device creation process, so the APs can be
brought up even though cpufreq_online() fails in that stage.

This patch ignores the return value of cpufreq_online/offline() and
lets the cpufreq framework deal with the failure.  cpufreq_online()
itself will do a proper rollback in that case and if _PCT is missing,
the ACPI cpufreq driver will print a warning if the corresponding
debug options have been enabled.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194581
Fixes: 27622b06 ("cpufreq: Convert to hotplug state machine")
Reported-and-tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a900152b upstream.

If the PWM was not enabled at U-Boot loader, PWM could not work for
clock always disabled at PWM driver. The PWM clock is enabled at
beginning of pwm_apply(), but disabled at end of pwm_apply().

If the PWM was enabled at U-Boot loader, PWM clock is always enabled
unless closed by ATF. The pwm-backlight might turn off the power at
early suspend, should disable PWM clock for saving power consume.

It is important to provide opportunity to enable/disable clock at PWM
driver, the PWM consumer should ensure correct order to call PWM enable
and disable, and PWM driver ensure state of PWM clock synchronized with
PWM enabled state.

Fixes: 2bf1c98a ("pwm: rockchip: Add support for atomic update")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 57c1d4c3 upstream.

The incorrect offset was used when trying to read the RXSTCMD register.
Signed-off-by: Markus Marb <markus@marb.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4aa5615e upstream.

The following warning results from holding a lane spinlock,
preempt_disable(), or the btt map spinlock and then trying to take the
reconfig_mutex to walk the poison list and potentially add new entries.

 BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747
 in_atomic(): 1, irqs_disabled(): 0, pid: 17159, name: dd
 [..]
 Call Trace:
  dump_stack+0x85/0xc8
  ___might_sleep+0x184/0x250
  __might_sleep+0x4a/0x90
  __mutex_lock+0x58/0x9b0
  ? nvdimm_bus_lock+0x21/0x30 [libnvdimm]
  ? __nvdimm_bus_badblocks_clear+0x2f/0x60 [libnvdimm]
  ? acpi_nfit_forget_poison+0x79/0x80 [nfit]
  ? _raw_spin_unlock+0x27/0x40
  mutex_lock_nested+0x1b/0x20
  nvdimm_bus_lock+0x21/0x30 [libnvdimm]
  nvdimm_forget_poison+0x25/0x50 [libnvdimm]
  nvdimm_clear_poison+0x106/0x140 [libnvdimm]
  nsio_rw_bytes+0x164/0x270 [libnvdimm]
  btt_write_pg+0x1de/0x3e0 [nd_btt]
  ? blk_queue_enter+0x30/0x290
  btt_make_request+0x11a/0x310 [nd_btt]
  ? blk_queue_enter+0xb7/0x290
  ? blk_queue_enter+0x30/0x290
  generic_make_request+0x118/0x3b0

As a minimal fix, disable error clearing when the BTT is enabled for the
namespace. For the final fix a larger rework of the poison list locking
is needed.

Note that this is not a problem in the blk case since that path never
calls nvdimm_clear_poison().

Fixes: 82bf1037 ("libnvdimm: check and clear poison before writing to pmem")
Cc: Dave Jiang <dave.jiang@intel.com>
[jeff: dynamically disable error clearing in the btt case]
Suggested-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0beb2012 upstream.

Holding the reconfig_mutex over a potential userspace fault sets up a
lockdep dependency chain between filesystem-DAX and the libnvdimm ioctl
path. Move the user access outside of the lock.

     [ INFO: possible circular locking dependency detected ]
     4.11.0-rc3+ #13 Tainted: G        W  O
     -------------------------------------------------------
     fallocate/16656 is trying to acquire lock:
      (&nvdimm_bus->reconfig_mutex){+.+.+.}, at: [<ffffffffa00080b1>] nvdimm_bus_lock+0x21/0x30 [libnvdimm]
     but task is already holding lock:
      (jbd2_handle){++++..}, at: [<ffffffff813b4944>] start_this_handle+0x104/0x460

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #2 (jbd2_handle){++++..}:
            lock_acquire+0xbd/0x200
            start_this_handle+0x16a/0x460
            jbd2__journal_start+0xe9/0x2d0
            __ext4_journal_start_sb+0x89/0x1c0
            ext4_dirty_inode+0x32/0x70
            __mark_inode_dirty+0x235/0x670
            generic_update_time+0x87/0xd0
            touch_atime+0xa9/0xd0
            ext4_file_mmap+0x90/0xb0
            mmap_region+0x370/0x5b0
            do_mmap+0x415/0x4f0
            vm_mmap_pgoff+0xd7/0x120
            SyS_mmap_pgoff+0x1c5/0x290
            SyS_mmap+0x22/0x30
            entry_SYSCALL_64_fastpath+0x1f/0xc2

    -> #1 (&mm->mmap_sem){++++++}:
            lock_acquire+0xbd/0x200
            __might_fault+0x70/0xa0
            __nd_ioctl+0x683/0x720 [libnvdimm]
            nvdimm_ioctl+0x8b/0xe0 [libnvdimm]
            do_vfs_ioctl+0xa8/0x740
            SyS_ioctl+0x79/0x90
            do_syscall_64+0x6c/0x200
            return_from_SYSCALL_64+0x0/0x7a

    -> #0 (&nvdimm_bus->reconfig_mutex){+.+.+.}:
            __lock_acquire+0x16b6/0x1730
            lock_acquire+0xbd/0x200
            __mutex_lock+0x88/0x9b0
            mutex_lock_nested+0x1b/0x20
            nvdimm_bus_lock+0x21/0x30 [libnvdimm]
            nvdimm_forget_poison+0x25/0x50 [libnvdimm]
            nvdimm_clear_poison+0x106/0x140 [libnvdimm]
            pmem_do_bvec+0x1c2/0x2b0 [nd_pmem]
            pmem_make_request+0xf9/0x270 [nd_pmem]
            generic_make_request+0x118/0x3b0
            submit_bio+0x75/0x150

Fixes: 62232e45 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices")
Cc: Dave Jiang <dave.jiang@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fe514739 upstream.

Commit a1f3e4d6 "libnvdimm, region: update nd_region_available_dpa()
for multi-pmem support" reworked blk dpa (DIMM Physical Address)
accounting to comprehend multiple pmem namespace allocations aliasing
with a given blk-dpa range.

The following call trace is a result of failing to account for allocated
blk capacity.

 WARNING: CPU: 1 PID: 2433 at tools/testing/nvdimm/../../../drivers/nvdimm/names
4 size_store+0x6f3/0x930 [libnvdimm]
 nd_region region5: allocation underrun: 0x0 of 0x1000000 bytes
 [..]
 Call Trace:
  dump_stack+0x86/0xc3
  __warn+0xcb/0xf0
  warn_slowpath_fmt+0x5f/0x80
  size_store+0x6f3/0x930 [libnvdimm]
  dev_attr_store+0x18/0x30

If a given blk-dpa allocation does not alias with any pmem ranges then
the full allocation should be accounted as busy space, not the size of
the current pmem contribution to the region.

The thinkos that led to this confusion was not realizing that the struct
resource management is already guaranteeing no collisions between pmem
allocations and blk allocations on the same dimm. Also, we do not try to
support blk allocations in aliased pmem holes.

This patch also fixes a case where the available blk goes negative.

Fixes: a1f3e4d6 ("libnvdimm, region: update nd_region_available_dpa() for multi-pmem support").
Reported-by: Dariusz Dokupil <dariusz.dokupil@intel.com>
Reported-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 32786821 upstream.

Fixes the mess observed in e.g. rsync over a noisy link we'd been
seeing since last Summer.  What happens is that we copy part of
a datagram before noticing a checksum mismatch.  Datagram will be
resent, all right, but we want the next try go into the same place,
not after it...

All this family of primitives (copy/checksum and copy a datagram
into destination) is "all or nothing" sort of interface - either
we get 0 (meaning that copy had been successful) or we get an
error (and no way to tell how much had been copied before we ran
into whatever error it had been).  Make all of them leave iterator
unadvanced in case of errors - all callers must be able to cope
with that (an error might've been caught before the iterator had
been advanced), it costs very little to arrange, it's safer for
callers and actually fixes at least one bug in said callers.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 27c0e374 upstream.

opposite to iov_iter_advance(); the caller is responsible for never
using it to move back past the initial position.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9121b15b upstream.

Connecting to the backend isn't working reliably in xen-fbfront: in
case XenbusStateInitWait of the backend has been missed the backend
transition to XenbusStateConnected will trigger the connected state
only without doing the actions required when the backend has
connected.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 49cb77e2 upstream.

This patch closes a race between se_lun deletion during configfs
unlink in target_fabric_port_unlink() -> core_dev_del_lun()
-> core_tpg_remove_lun(), when transport_clear_lun_ref() blocks
waiting for percpu_ref RCU grace period to finish, but a new
NodeACL mappedlun is added before the RCU grace period has
completed.

This can happen in target_fabric_mappedlun_link() because it
only checks for se_lun->lun_se_dev, which is not cleared until
after transport_clear_lun_ref() percpu_ref RCU grace period
finishes.

This bug originally manifested as NULL pointer dereference
OOPsen in target_stat_scsi_att_intr_port_show_attr_dev() on
v4.1.y code, because it dereferences lun->lun_se_dev without
a explicit NULL pointer check.

In post v4.1 code with target-core RCU conversion, the code
in target_stat_scsi_att_intr_port_show_attr_dev() no longer
uses se_lun->lun_se_dev, but the same race still exists.

To address the bug, go ahead and set se_lun>lun_shutdown as
early as possible in core_tpg_remove_lun(), and ensure new
NodeACL mappedlun creation in target_fabric_mappedlun_link()
fails during se_lun shutdown.
Reported-by: James Shen <jcs@datera.io>
Cc: James Shen <jcs@datera.io>
Tested-by: James Shen <jcs@datera.io>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>