- 18 Jan, 2017 5 commits
-
-
Guenter Roeck authored
Error messages after memory allocation failures are unnecessary and can be dropped, especially give that they were emitted as dev_dbg() so noone except person actively debugging the driver would see them. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Guenter Roeck authored
There is no call to i2c_get_clientdata() or dev_get_drvdata(). Drop the unnecessary call to i2c_set_clientdata(). Signed-off-by:
-
Guenter Roeck authored
Use local variable 'dev' instead of dereferencing it several times. Signed-off-by:
-
Guenter Roeck authored
Error messages after memory allocation failures are unnecessary and can be dropped, given that they are emitted as dev_dbg() so nobody except person actively debugging the driver would see them. Also replace jump to return 'goto l; ... l: return e;' with 'return e;' Signed-off-by:
-
Guenter Roeck authored
There is no call to platform_get_drvdata() or dev_get_drvdata(). Drop the unnecessary call to dev_set_drvdata(). Other relevant changes: Use existing variable 'dev' instead of dereferencing it several times This conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop dev_set_drvdata() - Use local variable 'struct device *dev' consistently Signed-off-by:
-
- 17 Jan, 2017 1 commit
-
-
Maxime Ripard authored
The TCA8418 might be used using different interrupt triggers on various boards. This is not working so far because the current code forces a falling edge trigger. The device tree already provides a trigger type, so let's use whatever it sets up, and since we can be loaded without DT, keep the old behaviour for the non-DT case. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
- 15 Jan, 2017 7 commits
-
-
Nicholas Mc Guire authored
ulseep_range() uses hrtimers and provides no advantage over msleep() for larger delays. Fix up the 50ms delays here to use msleep() and reduce the load on the hrtimer subsystem. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
-
Nicholas Mc Guire authored
Using counter based retry loops for peripherals results in the delay being significantly overrun during high-load situations where delay functions tend to be vary imprecise and overrun there timeouts. So condition the termination on the actual condition of 2s for the re-calibration to have been successful. As this is a very long delay there is no advantage in using high-resolution timers thus switching this to msleep(). Signed-off-by:
-
Akinobu Mita authored
This driver currently only supports legacy platform data probe. This change adds device tree support and gets rid of platform data probe code since no one is actually using mpr121 platform data in the mainline. The device tree property parsing code is based on the work of atmel_captouch driver. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
This driver reports input events on their interrupts which are triggered by the sensor's status register changes. But only single bit change is reported in the interrupt handler. So if there are multiple bits are changed at almost the same time, other press or release events are ignored. This fixes it by detecting all changed bits in the status register. Signed-off-by:
-
Akinobu Mita authored
This driver reports misc scan input events on the sensor's status register changes. But the event capability for them was not set in the device initialization, so these events were ignored. This change adds the missing event capability. Signed-off-by:
-
Akinobu Mita authored
Remove unused key_val field in struct mpr121_touchkey. Signed-off-by:
-
Akinobu Mita authored
Instead of using #ifdef, let's mark suspend and resume methods as __maybe_unused to provide better compile coverage. Suggested-by:
-
- 06 Jan, 2017 6 commits
-
-
Andy Shevchenko authored
The Moorestown support was removed by commit 1a8359e4 ("x86/mid: Remove Intel Moorestown"). Remove this leftover. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Aniroop Mathur authored
msleep(1~20) may not do what the caller intends, and will often sleep longer (~20 ms actual sleep for any value given in the 1~20ms range). This is not the desired behaviour for many cases like device resume time, device suspend time, device enable time, retry logic, etc. Thus, change msleep to usleep_range for precise wakeups. Signed-off-by:
Aniroop Mathur <a.mathur@samsung.com> Acked-by:
Simon Budig <simon.budig@kernelconcepts.de> Signed-off-by:
-
Cameron Gutman authored
The order of endpoints is well defined on official Xbox pads, but we have found at least one 3rd-party pad that doesn't follow the standard ("Titanfall 2 Xbox One controller" 0e6f:0165). Fortunately, we get lucky with this specific pad because it uses endpoint addresses that differ only by direction. We know that there are other pads out where this is not true, so let's go ahead and fix this. Signed-off-by:Cameron Gutman <aicommander@gmail.com> Signed-off-by:
-
Pavel Rojtberg authored
Replace first goto with simple returns as we really are just returning one error code. Signed-off-by:
Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by:
-
Daniel Tobias authored
xbox one was the only device that has a *_process_buttons routine. Signed-off-by:
-
Daniel Tobias authored
Signed-off-by:
Daniel Tobias <dan.g.tob@gmail.com> Signed-off-by:
-
- 27 Dec, 2016 1 commit
-
-
Aniroop Mathur authored
msleep (1~20) may not do what the caller intends, and will often sleep longer. (~20 ms actual sleep for any value given in the 1~20ms range) This is not the desired behaviour for many cases like device resume time, device suspend time, device enable time, etc. Thus, change msleep to usleep_range for precise wakeups. Signed-off-by:
-
- 18 Dec, 2016 1 commit
-
-
Dmitry Torokhov authored
We rely on the result of scanning PNP bus for keyboard and mouse devices to decide whether we should continue initialization of i8042 driver or not, so the probes can not be asynchronous. Also, it is not a good idea to unbind either of the PNP devices while i8042 is running, so let's disable bind/unbind for the PNP drivers through sysfs and rely on i8042 cleaning after itself properly. User can still unbind and rebind entire i8042 and that will take care of PNP drivers as well. Reviewed-by:
Luis R. Rodriguez <mgrof@kernel.org> Signed-off-by:
-
- 16 Dec, 2016 2 commits
-
-
Dmitry Torokhov authored
Merge updated Synaptics RMI4 support, including support for SMBus controllers and flashing firmware.
-
Guy Shapiro authored
Make the avarage-samples property a general touchscreen property rather than imx6ul device specific. Signed-off-by:
Guy Shapiro <guy.shapiro@mobi-wize.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 12 Dec, 2016 7 commits
-
-
Jingkui Wang authored
Update driver drv260x to use generic device properties so that it can be used on non-DT systems. We also remove platform data as generic device properties work on static board code as well. Signed-off-by:
Jingkui Wang <jkwang@google.com> Signed-off-by:
-
Dmitry Torokhov authored
Let's introduce a temporary for "client->dev" is probe() as we use it quite a few times and "dev" is shorter. Signed-off-by: -
Jingkui Wang authored
We were assigning I2C bus controller instead of client as parent device. Besides being logically wrong, it messed up with devm handling of input device. As a result we were leaving input device and event node behind after rmmod-ing the driver, which lead to a kernel oops if one were to access the event node later. Let's remove the assignment and rely on devm_input_allocate_device() to set it up properly for us. Signed-off-by:
-
Nick Dyer authored
Port firmware update code from Samsung Galaxy S7 driver into mainline framework. This patch has been tested on Synaptics S7813. Signed-off-by:
Nick Dyer <nick@shmanahar.org> Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
We were accidentally initializing haptics->rated_voltage twice, and did not initialize overdrive voltage. Acked-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Marcos Paulo de Souza authored
Signed-off-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Reviewed-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
-
Marcos Paulo de Souza authored
As this define check if huge, this makes easier to read the code. Signed-off-by:
-
- 08 Dec, 2016 2 commits
-
-
Vladimir Zapolskiy authored
Semantics of NR_IRQS is different on machines with SPARSE_IRQ option disabled or enabled, in the latter case IRQs are allocated starting at least from the value specified by NR_IRQS and going upwards, so the check of (irq >= NR_IRQ) to decide about an error code returned by platform_get_irq() is completely invalid, don't attempt to overrule irq subsystem in the driver. The change fixes lpc32xx_keys driver initialization on boot: lpc32xx_keys 40050000.key: failed to get platform irq lpc32xx_keys: probe of 40050000.key failed with error -22 Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Acked-by:
Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by:
-
Nick Dyer authored
The debug would only ever output zero for the clip information. Signed-off-by:
Andrew Duggan <aduggan@synaptics.com> Tested-by:
-
- 03 Dec, 2016 4 commits
-
-
Benjamin Tissoires authored
Now that we have a proper API to set the attention data, there is no point in keeping it in the transport driver. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by:
-
Benjamin Tissoires authored
The HID implementation of RMI4 provides the data during the interrupt (in the input report). We need to provide a way for this transport driver to provide the attention data while calling an IRQ. We use a fifo in rmi_core to not lose any incoming event. Signed-off-by:
-
Dennis Wassenberg authored
First check if there are data available passed by the transport device. If data available use these data. If there are no data available try to read the rmi block if dsata are passed this way. This is the way the other rmi function handlers will do this. This patch is needed on HID devices because the firmware reads F03 data registers and adds them to the HID attention report. Reading those registers from the driver after the firmware read them will result in invalid data. Reviewed-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Signed-off-by:
-
Lyude Paul authored
This adds basic functionality for PS/2 passthrough on Synaptics Touchpads using RMI4 through smbus. Reviewed-by:
Lyude Paul <thatslyude@gmail.com> Signed-off-by:
-
- 01 Dec, 2016 4 commits
-
-
Guy Shapiro authored
The code uses of_property_read_u32 and expects positive values. However, the values are stored in signed int variables. Additionally, the registers values are also stored in signed variables without a good reason (readl/writel expect u32). The only time this caused a real bug was in the new average-samples property, in which the property is numerically compared and implicitly expected to be positive. I believe it's better to change all the properties and registers to u32, for consistency and warnings reduction. Signed-off-by:
Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by:
-
Haibo Chen authored
Add mask of each function bits of REG_ADC_CFG, and clear these function bits first, otherwise use '|=' operation may get the wrong setting which depends on the original value of REG_ADC_CFG. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Reviewed-by:
-
Benjamin Tissoires authored
If struct rmi_device_platform_data contains pointers to other struct, it gets difficult to allocate a fixed size struct and copy it over between drivers. Change the pointers into a struct and change the code in rmi4 accordingly. Reviewed-by:
-
Benjamin Tissoires authored
those functions should not be used outside of rmi_core.ko. There is no point in exporting them to the world. It looks like rmi_read_pdt_entry() should be static too. Signed-off-by:
-
