- 24 Jun, 2017 5 commits
-
-
Tomasz Wilczyński authored
commit b8e11f7d upstream. Commit 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) removed the 10 point substraction when comparing the load against down_threshold but did not remove the related limit for the down_threshold value. As a result, down_threshold lower than 11 is not allowed even though values from 1 to 10 do work correctly too. The comment ("cannot be lower than 11 otherwise freq will not fall") also does not apply after removing the substraction. For this reason, allow down_threshold to take any value from 1 to 99 and fix the related comment. Fixes: 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) Signed-off-by:
Tomasz Wilczyński <twilczynski@naver.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 0db47e3d upstream. While discussing the possible merits of clang warning about unused initialized functions, I found one function that was clearly meant to be called but never actually is. __ila_hash_secret_init() initializes the hash value for the ila locator, apparently this is intended to prevent hash collision attacks, but this ends up being a read-only zero constant since there is no caller. I could find no indication of why it was never called, the earliest patch submission for the module already was like this. If my interpretation is right, we certainly want to backport the patch to stable kernels as well. I considered adding it to the ila_xlat_init callback, but for best effect the random data is read as late as possible, just before it is first used. The underlying net_get_random_once() is already highly optimized to avoid overhead when called frequently. Fixes: 7f00feaf ("ila: Add generic ILA translation facility") Link: https://www.spinics.net/lists/kernel/msg2527243.htmlSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Marc Kleine-Budde authored
commit 5cda3ee5 upstream. This patch adds the missing kfree() in gs_cmd_reset() to free the memory that is not used anymore after usb_control_msg(). Cc: Maximilian Schneider <max@schneidersoft.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Nicholas Bellinger authored
commit ba80aa90 upstream. This patch closes a long standing race in configfs between the creation of a new symlink in create_link(), while the symlink target's config_item is being concurrently removed via configfs_rmdir(). This can happen because the symlink target's reference is obtained by config_item_get() in create_link() before the CONFIGFS_USET_DROPPING bit set by configfs_detach_prep() during configfs_rmdir() shutdown is actually checked.. This originally manifested itself on ppc64 on v4.8.y under heavy load using ibmvscsi target ports with Novalink API: [ 7877.289863] rpadlpar_io: slot U8247.22L.212A91A-V1-C8 added [ 7879.893760] ------------[ cut here ]------------ [ 7879.893768] WARNING: CPU: 15 PID: 17585 at ./include/linux/kref.h:46 config_item_get+0x7c/0x90 [configfs] [ 7879.893811] CPU: 15 PID: 17585 Comm: targetcli Tainted: G O 4.8.17-customv2.22 #12 [ 7879.893812] task: c00000018a0d3400 task.stack: c0000001f3b40000 [ 7879.893813] NIP: d000000002c664ec LR: d000000002c60980 CTR: c000000000b70870 [ 7879.893814] REGS: c0000001f3b43810 TRAP: 0700 Tainted: G O (4.8.17-customv2.22) [ 7879.893815] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28222242 XER: 00000000 [ 7879.893820] CFAR: d000000002c664bc SOFTE: 1 GPR00: d000000002c60980 c0000001f3b43a90 d000000002c70908 c0000000fbc06820 GPR04: c0000001ef1bd900 0000000000000004 0000000000000001 0000000000000000 GPR08: 0000000000000000 0000000000000001 d000000002c69560 d000000002c66d80 GPR12: c000000000b70870 c00000000e798700 c0000001f3b43ca0 c0000001d4949d40 GPR16: c00000014637e1c0 0000000000000000 0000000000000000 c0000000f2392940 GPR20: c0000001f3b43b98 0000000000000041 0000000000600000 0000000000000000 GPR24: fffffffffffff000 0000000000000000 d000000002c60be0 c0000001f1dac490 GPR28: 0000000000000004 0000000000000000 c0000001ef1bd900 c0000000f2392940 [ 7879.893839] NIP [d000000002c664ec] config_item_get+0x7c/0x90 [configfs] [ 7879.893841] LR [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893842] Call Trace: [ 7879.893844] [c0000001f3b43ac0] [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893847] [c0000001f3b43b10] [c000000000329770] do_dentry_open+0x2c0/0x460 [ 7879.893849] [c0000001f3b43b70] [c000000000344480] path_openat+0x210/0x1490 [ 7879.893851] [c0000001f3b43c80] [c00000000034708c] do_filp_open+0xfc/0x170 [ 7879.893853] [c0000001f3b43db0] [c00000000032b5bc] do_sys_open+0x1cc/0x390 [ 7879.893856] [c0000001f3b43e30] [c000000000009584] system_call+0x38/0xec [ 7879.893856] Instruction dump: [ 7879.893858] 409d0014 38210030 e8010010 7c0803a6 4e800020 3d220000 e94981e0 892a0000 [ 7879.893861] 2f890000 409effe0 39200001 992a0000 <0fe00000> 4bffffd0 60000000 60000000 [ 7879.893866] ---[ end trace 14078f0b3b5ad0aa ]--- To close this race, go ahead and obtain the symlink's target config_item reference only after the existing CONFIGFS_USET_DROPPING check succeeds. This way, if configfs_rmdir() wins create_link() will return -ENONET, and if create_link() wins configfs_rmdir() will return -EBUSY. Reported-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
commit 20223f0f upstream. Fixes: 793b80ef ("vfs: pass a flags argument to vfs_readv/vfs_writev") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
- 17 Jun, 2017 35 commits
-
-
Greg Kroah-Hartman authored
-
Dan Carpenter authored
commit b5c32061 upstream. My static checker complains that if "lvl" is ULONG_MAX (this is 64 bit) then some of the strings will overflow. I don't know if that's possible but it seems simple enough to make the buffers slightly larger. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Maarten Lankhorst authored
commit 4e3aed84 upstream. On some systems there can be a race condition in which no crtc state is added to the first atomic commit. This results in all crtc's having a null DDB allocation, causing a FIFO underrun on any update until the first modeset. Changes since v1: - Do not take the connection_mutex, this is already done below. Reported-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Inspired-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
commit 8f4d3809 upstream. The scanline counter is bonkers on VLV/CHV DSI. The scanline counter increment is not lined up with the start of vblank like it is on every other platform and output type. This causes problems for both the vblank timestamping and atomic update vblank evasion. On my FFRD8 machine at least, the scanline counter increment happens about 1/3 of a scanline ahead of the start of vblank (which is where all register latching happens still). That means we can't trust the scanline counter to tell us whether we're in vblank or not while we're on that particular line. In order to keep vblank timestamping in working condition when called from the vblank irq, we'll leave scanline_offset at one, which means that the entire line containing the start of vblank is considered to be inside the vblank. For the vblank evasion we'll need to consider that entire line to be bad, since we can't tell whether the registers already got latched or not. And we can't actually use the start of vblank interrupt to get us past that line as the interrupt would fire too soon, and then we'd up waiting for the next start of vblank instead. One way around that would using the frame start interrupt instead since that wouldn't fire until the next scanline, but that would require some bigger changes in the interrupt code. So for simplicity we'll just poll until we get past the bad line. v2: Adjust the comments a bit Cc: Jonas Aaberg <cja@gmx.net> Tested-by:
Jonas Aaberg <cja@gmx.net> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99086Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161215174734.28779-1-ville.syrjala@linux.intel.comTested-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
-
Christian Borntraeger authored
commit c0e7bb38 upstream. For most cases a protection exception in the host (e.g. copy on write or dirty tracking) on the sie instruction will indicate an instruction length of 4. Turns out that there are some corner cases (e.g. runtime instrumentation) where this is not necessarily true and the ILC is unpredictable. Let's replace our 4 byte rewind_pad with 3 byte nops to prepare for all possible ILCs. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Max Filippov authored
commit e5c86679 upstream. Linux IRQ #0 is reserved for error reporting and may not be used. Increase NR_IRQS for one additional slot and increase irq_domain_add_legacy parameter first_irq value to 1, so that linux IRQ #0 is not associated with hardware IRQ #0 in legacy IRQ domains. Introduce macro XTENSA_PIC_LINUX_IRQ for static translation of xtensa PIC hardware IRQ # to linux IRQ #. Use this macro in XTFPGA platform data definitions. This fixes inability to use hardware IRQ #0 in configurations that don't use device tree and allows for non-identity mapping between linux IRQ # and hardware IRQ #. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit 59e8970b ] Return the maximum supported amount of inline data, not the qp's current configured inline data size, when filling out the results of a query qp call. Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit c78c3149 ] It is normal to flush CQEs if the QP is in error state. Hence there's no use in printing a message per CQE to dmesg. Signed-off-by:
-
Ram Amrani authored
[ Upstream commit 933e6dca ] Fail QP state transition from error to reset if SQ/RQ are not empty and still in the process of flushing out the queued work entries. Signed-off-by:
-
Ram Amrani authored
[ Upstream commit 9c1e0228 ] Free the PD if no internal resources were available. Move userspace code under the relevant 'if'. Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit f449c7a2 ] Relying on qede to trigger qedr on startup is problematic. When probing both if qedr loads slowly then qede can assume qedr is missing and not trigger it. This patch adds a triggering from qedr and protects against a race via an atomic bit. Signed-off-by:
-
Liping Zhang authored
[ Upstream commit 5ce6b04c ] First, log prefix will be truncated to NF_LOG_PREFIXLEN-1, i.e. 127, at nf_log_packet(), so the extra part is useless. Second, after adding a log rule with a very very long prefix, we will fail to dump the nft rules after this _special_ one, but acctually, they do exist. For example: # name_65000=$(printf "%0.sQ" {1..65000}) # nft add rule filter output log prefix "$name_65000" # nft add rule filter output counter # nft add rule filter output counter # nft list chain filter output table ip filter { chain output { type filter hook output priority 0; policy accept; } } So now, restrict the log prefix length to NF_LOG_PREFIXLEN-1. Fixes: 96518518 ("netfilter: add nftables") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 35d0ac90 ] If the element exists and no NLM_F_EXCL is specified, do not bump set->nelems, otherwise we leak one set element slot. This problem amplifies if the set is full since the abort path always decrements the counter for the -ENFILE case too, giving one spare extra slot. Fix this by moving set->nelems update to nft_add_set_elem() after successful element insertion. Moreover, remove the element if the set is full so there is no need to rely on the abort path to undo things anymore. Fixes: c016c7e4 ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion") Signed-off-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit 93f955aa ] We trigger a soft lockup as we grab nametbl_lock twice if the node has a pending node up/down or link up/down event while: - we process an incoming named message in tipc_named_rcv() and perform an tipc_update_nametbl(). - we have pending backlog items in the name distributor queue during a nametable update using tipc_nametbl_publish() or tipc_nametbl_withdraw(). The following are the call chain associated: tipc_named_rcv() Grabs nametbl_lock tipc_update_nametbl() (publish/withdraw) tipc_node_subscribe()/unsubscribe() tipc_node_write_unlock() << lockup occurs if an outstanding node/link event exits, as we grabs nametbl_lock again >> tipc_nametbl_withdraw() Grab nametbl_lock tipc_named_process_backlog() tipc_update_nametbl() << rest as above >> The function tipc_node_write_unlock(), in addition to releasing the lock processes the outstanding node/link up/down events. To do this, we need to grab the nametbl_lock again leading to the lockup. In this commit we fix the soft lockup by introducing a fast variant of node_unlock(), where we just release the lock. We adapt the node_subscribe()/node_unsubscribe() to use the fast variants. Reported-and-Tested-by:
John Thompson <thompa.atl@gmail.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit d094c4d5 ] Until now, the subscribers keep track of the subscriptions using reference count at subscriber level. At subscription cancel or subscriber delete, we delete the subscription only if the timer was pending for the subscription. This approach is incorrect as: 1. del_timer() is not SMP safe, if on CPU0 the check for pending timer returns true but CPU1 might schedule the timer callback thereby deleting the subscription. Thus when CPU0 is scheduled, it deletes an invalid subscription. 2. We export tipc_subscrp_report_overlap(), which accesses the subscription pointer multiple times. Meanwhile the subscription timer can expire thereby freeing the subscription and we might continue to access the subscription pointer leading to memory violations. In this commit, we introduce subscription refcount to avoid deleting an invalid subscription. Reported-and-Tested-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit fc0adfc8 ] Until now, the generic server framework maintains the connection id's per subscriber in server's conn_idr. At tipc_close_conn, we remove the connection id from the server list, but the connection is valid until we call the refcount cleanup. Hence we have a window where the server allocates the same connection to an new subscriber leading to inconsistent reference count. We have another refcount warning we grab the refcount in tipc_conn_lookup() for connections with flag with CF_CONNECTED not set. This usually occurs at shutdown when the we stop the topology server and withdraw TIPC_CFG_SRV publication thereby triggering a withdraw message to subscribers. In this commit, we: 1. remove the connection from the server list at recount cleanup. 2. grab the refcount for a connection only if CF_CONNECTED is set. Tested-by:
-
Parthasarathy Bhuvaragan authored
[ Upstream commit 4c887aa6 ] In tipc_conn_sendmsg(), we first queue the request to the outqueue followed by the connection state check. If the connection is not connected, we should not queue this message. In this commit, we reject the messages if the connection state is not CF_CONNECTED. Acked-by:
-
Vineet Gupta authored
[ Upstream commit 78f824d4 ] This is needed on HS38 cores, for setting up IO-Coherency aperture properly The polling could perturb the caches and coherecy fabric which could be wrong in the small window when Master is setting up IOC aperture etc in arc_cache_init() We do it only for ARCv2 based builds to not affect EZChip ARCompact based platform. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit bf02454a ] For run-on-reset SMP configs, non master cores call a routine which waits until Master gives it a "go" signal (currently using a shared mem flag). The same routine then jumps off the well known entry point of all non Master cores i.e. @first_lines_of_secondary This patch moves out the last part into one single place in early boot code. This is better in terms of absraction (the wait API only waits) and returns, leaving out the "jump off to" part. In actual implementation this requires some restructuring of the early boot code as well as Master now jumps to BSS setup explicitly, vs. falling thru into it before. Technically this patch doesn't cause any functional change, it just moves the ugly #ifdef'ry from assembly code to "C" Signed-off-by:
-
Stefan Hajnoczi authored
[ Upstream commit 0516ffd8 ] Propagate the error when vhost_vq_init_access() fails and set vq->private_data to NULL. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Don Zickus authored
[ Upstream commit b94f5118 ] On an overloaded system, it is possible that a change in the watchdog threshold can be delayed long enough to trigger a false positive. This can easily be achieved by having a cpu spinning indefinitely on a task, while another cpu updates watchdog threshold. What happens is while trying to park the watchdog threads, the hrtimers on the other cpus trigger and reprogram themselves with the new slower watchdog threshold. Meanwhile, the nmi watchdog is still programmed with the old faster threshold. Because the one cpu is blocked, it prevents the thread parking on the other cpus from completing, which is needed to shutdown the nmi watchdog and reprogram it correctly. As a result, a false positive from the nmi watchdog is reported. Fix this by setting a park_in_progress flag to block all lockups until the parking is complete. Fix provided by Ulrich Obergfell. [akpm@linux-foundation.org: s/park_in_progress/watchdog_park_in_progress/] Link: http://lkml.kernel.org/r/1481041033-192236-1-git-send-email-dzickus@redhat.comSigned-off-by:
Don Zickus <dzickus@redhat.com> Reviewed-by:
Aaron Tomlin <atomlin@redhat.com> Cc: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Babu Moger authored
[ Upstream commit 249e52e3 ] Patch series "Clean up watchdog handlers", v2. This is an attempt to cleanup watchdog handlers. Right now, kernel/watchdog.c implements both softlockup and hardlockup detectors. Softlockup code is generic. Hardlockup code is arch specific. Some architectures don't use hardlockup detectors. They use their own watchdog detectors. To make both these combination work, we have numerous #ifdefs in kernel/watchdog.c. We are trying here to make these handlers independent of each other. Also provide an interface for architectures to implement their own handlers. watchdog_nmi_enable and watchdog_nmi_disable will be defined as weak such that architectures can override its definitions. Thanks to Don Zickus for his suggestions. Here are our previous discussions http://www.spinics.net/lists/sparclinux/msg16543.html http://www.spinics.net/lists/sparclinux/msg16441.html This patch (of 3): Move shared macros and definitions to nmi.h so that watchdog.c, new file watchdog_hld.c or any other architecture specific handler can use those definitions. Link: http://lkml.kernel.org/r/1478034826-43888-2-git-send-email-babu.moger@oracle.comSigned-off-by:
Babu Moger <babu.moger@oracle.com> Acked-by:
-
Babu Moger authored
[ Upstream commit 73ce0511 ] Separate hardlockup code from watchdog.c and move it to watchdog_hld.c. It is mostly straight forward. Remove everything inside CONFIG_HARDLOCKUP_DETECTORS. This code will go to file watchdog_hld.c. Also update the makefile accordigly. Link: http://lkml.kernel.org/r/1478034826-43888-3-git-send-email-babu.moger@oracle.comSigned-off-by:
-
Andrea Arcangeli authored
[ Upstream commit 15a77c6f ] With >=32 CPUs the userfaultfd selftest triggered a graceful but unexpected SIGBUS because VM_FAULT_RETRY was returned by handle_userfault() despite the UFFDIO_COPY wasn't completed. This seems caused by rwsem waking the thread blocked in handle_userfault() and we can't run up_read() before the wait_event sequence is complete. Keeping the wait_even sequence identical to the first one, would require running userfaultfd_must_wait() again to know if the loop should be repeated, and it would also require retaking the rwsem and revalidating the whole vma status. It seems simpler to wait the targeted wakeup so that if false wakeups materialize we still wait for our specific wakeup event, unless of course there are signals or the uffd was released. Debug code collecting the stack trace of the wakeup showed this: $ ./userfaultfd 100 99999 nr_pages: 25600, nr_pages_per_cpu: 800 bounces: 99998, mode: racing ver poll, userfaults: 32 35 90 232 30 138 69 82 34 30 139 40 40 31 20 19 43 13 15 28 27 38 21 43 56 22 1 17 31 8 4 2 bounces: 99997, mode: rnd ver poll, Bus error (core dumped) save_stack_trace+0x2b/0x50 try_to_wake_up+0x2a6/0x580 wake_up_q+0x32/0x70 rwsem_wake+0xe0/0x120 call_rwsem_wake+0x1b/0x30 up_write+0x3b/0x40 vm_mmap_pgoff+0x9c/0xc0 SyS_mmap_pgoff+0x1a9/0x240 SyS_mmap+0x22/0x30 entry_SYSCALL_64_fastpath+0x1f/0xbd 0xffffffffffffffff FAULT_FLAG_ALLOW_RETRY missing 70 CPU: 24 PID: 1054 Comm: userfaultfd Tainted: G W 4.8.0+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xb8/0x112 handle_userfault+0x572/0x650 handle_mm_fault+0x12cb/0x1520 __do_page_fault+0x175/0x500 trace_do_page_fault+0x61/0x270 do_async_page_fault+0x19/0x90 async_page_fault+0x25/0x30 This always happens when the main userfault selftest thread is running clone() while glibc runs either mprotect or mmap (both taking mmap_sem down_write()) to allocate the thread stack of the background threads, while locking/userfault threads already run at full throttle and are susceptible to false wakeups that may cause handle_userfault() to return before than expected (which results in graceful SIGBUS at the next attempt). This was reproduced only with >=32 CPUs because the loop to start the thread where clone() is too quick with fewer CPUs, while with 32 CPUs there's already significant activity on ~32 locking and userfault threads when the last background threads are started with clone(). This >=32 CPUs SMP race condition is likely reproducible only with the selftest because of the much heavier userfault load it generates if compared to real apps. We'll have to allow "one more" VM_FAULT_RETRY for the WP support and a patch floating around that provides it also hidden this problem but in reality only is successfully at hiding the problem. False wakeups could still happen again the second time handle_userfault() is invoked, even if it's a so rare race condition that getting false wakeups twice in a row is impossible to reproduce. This full fix is needed for correctness, the only alternative would be to allow VM_FAULT_RETRY to be returned infinitely. With this fix the WP support can stick to a strict "one more" VM_FAULT_RETRY logic (no need of returning it infinite times to avoid the SIGBUS). Link: http://lkml.kernel.org/r/20170111005535.13832-2-aarcange@redhat.comSigned-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reported-by:
Shubham Kumar Sharma <shubham.kumar.sharma@oracle.com> Tested-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michael Rapoport <RAPOPORT@il.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 3ba4bcee ] We have seen proc_pid_readdir() invocations holding cpu for more than 50 ms. Add a cond_resched() to be gentle with other tasks. [akpm@linux-foundation.org: coding style fix] Link: http://lkml.kernel.org/r/1484238380.15816.42.camel@edumazet-glaptop3.roam.corp.google.comSigned-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Sudip Mukherjee authored
[ Upstream commit 4180c4c1 ] Some more atomic64 operations were missing and as a result frv allmodconfig was failing. Add the missing operations. Link: http://lkml.kernel.org/r/1485193844-12850-1-git-send-email-sudip.mukherjee@codethink.co.ukSigned-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Sudip Mukherjee authored
[ Upstream commit 545d58f6 ] The build of frv allmodconfig was failing with the error: lib/atomic64_test.c:209:9: error: implicit declaration of function 'atomic64_add_unless' All the atomic64 operations were defined in frv, but atomic64_add_unless() was not done. Implement atomic64_add_unless() as done in other arches. Link: http://lkml.kernel.org/r/1484781236-6698-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by:
-
Coly Li authored
[ Upstream commit f598f82e ] Commit 8a59f5d2 ("fs/romfs: return f_fsid for statfs(2)") generates a 64bit id from sb->s_bdev->bd_dev. This is only correct when romfs is defined with CONFIG_ROMFS_ON_BLOCK. If romfs is only defined with CONFIG_ROMFS_ON_MTD, sb->s_bdev is NULL, referencing sb->s_bdev->bd_dev will triger an oops. Richard Weinberger points out that when CONFIG_ROMFS_BACKED_BY_BOTH=y, both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD are defined. Therefore when calling huge_encode_dev() to generate a 64bit id, I use the follow order to choose parameter, - CONFIG_ROMFS_ON_BLOCK defined use sb->s_bdev->bd_dev - CONFIG_ROMFS_ON_BLOCK undefined and CONFIG_ROMFS_ON_MTD defined use sb->s_dev when, - both CONFIG_ROMFS_ON_BLOCK and CONFIG_ROMFS_ON_MTD undefined leave id as 0 When CONFIG_ROMFS_ON_MTD is defined and sb->s_mtd is not NULL, sb->s_dev is set to a device ID generated by MTD_BLOCK_MAJOR and mtd index, otherwise sb->s_dev is 0. This is a try-best effort to generate a uniq file system ID, if all the above conditions are not meet, f_fsid of this romfs instance will be 0. Generally only one romfs can be built on single MTD block device, this method is enough to identify multiple romfs instances in a computer. Link: http://lkml.kernel.org/r/1482928596-115155-1-git-send-email-colyli@suse.deSigned-off-by:
Coly Li <colyli@suse.de> Reported-by:
Nong Li <nongli1031@gmail.com> Tested-by:
-
Randy Dunlap authored
[ Upstream commit 3705ccfd ] When CONFIG_FPU is not enabled on arch/mn10300, <asm/switch_to.h> causes a build error with a call to fpu_save(): kernel/built-in.o: In function `.L410': core.c:(.sched.text+0x28a): undefined reference to `fpu_save' Fix this by including <asm/fpu.h> in <asm/switch_to.h> so that an empty static inline fpu_save() is defined. Link: http://lkml.kernel.org/r/dc421c4f-4842-4429-1b99-92865c2f24b6@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Reviewed-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 3ba7b779 ] While testing musb host mode cable plugging on a BeagleBone, I came across this error: Unhandled fault: external abort on non-linefetch (0x1008) at 0xd1dcfc60 ... [<bf668390>] (musb_default_readb [musb_hdrc]) from [<bf668578>] (musb_irq_work+0x1c/0x180 [musb_hdrc]) [<bf668578>] (musb_irq_work [musb_hdrc]) from [<c0156554>] (process_one_work+0x2b4/0x808) [<c0156554>] (process_one_work) from [<c015767c>] (worker_thread+0x3c/0x550) [<c015767c>] (worker_thread) from [<c015d568>] (kthread+0x104/0x148) [<c015d568>] (kthread) from [<c01078d0>] (ret_from_fork+0x14/0x24) Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 6f29a130 ] sctp_addr_id2transport is a function for sockopt to look up assoc by address. As the address is from userspace, it can be a v4-mapped v6 address. But in sctp protocol stack, it always handles a v4-mapped v6 address as a v4 address. So it's necessary to convert it to a v4 address before looking up assoc by address. This patch is to fix it by calling sctp_verify_addr in which it can do this conversion before calling sctp_endpoint_lookup_assoc, just like what sctp_sendmsg and __sctp_connect do for the address from users. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 5207f399 ] Now sctp gso puts segments into skb's frag_list, then processes these segments in skb_segment. But skb_segment handles them only when gs is enabled, as it's in the same branch with skb's frags. Although almost all the NICs support sg other than some old ones, but since commit 1e16aa3d ("net: gso: use feature flag argument in all protocol gso handlers"), features &= skb->dev->hw_enc_features, and xfrm_output_gso call skb_segment with features = 0, which means sctp gso would call skb_segment with sg = 0, and skb_segment would not work as expected. This patch is to fix it by setting features param with NETIF_F_SG when calling skb_segment so that it can go the right branch to process the skb's frag_list. Signed-off-by:
-
Michael Chan authored
[ Upstream commit 90c694bb ] bnxt_get_port_module_status() calls bnxt_update_link() which expects RTNL to be held. In bnxt_sp_task() that does not hold RTNL, we need to call it with a prior call to bnxt_rtnl_lock_sp() and the call needs to be moved to the end of bnxt_sp_task(). Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 0eaa24b9 ] bnxt_update_link() is called from multiple code paths. Most callers, such as open, ethtool, already hold RTNL. Only the caller bnxt_sp_task() does not. So it is a bug to take RTNL inside bnxt_update_link(). Fix it by removing the RTNL inside bnxt_update_link(). The function now expects the caller to always hold RTNL. In bnxt_sp_task(), call bnxt_rtnl_lock_sp() before calling bnxt_update_link(). We also need to move the call to the end of bnxt_sp_task() since it will be clearing the BNXT_STATE_IN_SP_TASK bit. Signed-off-by:
-
Michael Chan authored
[ Upstream commit 286ef9d6 ] On some dual port NICs, the speed setting on one port can affect the available speed on the other port. Add logic to detect these changes and adjust the advertised speed settings when necessary. Signed-off-by:
-
