- 17 Oct, 2012 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull ext2, ext3, quota fixes from Jan Kara: "Fix three regressions caused by user namespace conversions (ext2, ext3, quota) and minor ext3 fix and cleanup." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Silence warning about PRJQUOTA not being handled in need_print_warning() ext3: fix return values on parse_options() failure ext2: fix return values on parse_options() failure ext3: ext3_bread usage audit ext3: fix possible non-initialized variable on htree_dirblock_to_tree()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "Fix for my braino in replace_fd(), dhowell's fix for the fallout from over-enthusiastic bo^Wdeclaration movements plus crapectomy that should've happened a long time ago (SEL_... definitions)." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: bury SEL_{IN,OUT,EX} Unexport some bits of linux/fs.h fix a leak in replace_fd() users
-
Linus Torvalds authored
Merge tag 'pinctrl-fixes-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "A number of pinctrl fixes for the v3.7 series: - duplicate includes, section markup, code mishaps - erroneous return value in errorpath on the bcm2835 driver - remove an unused sirf function that was causing build errors - multiple-platform compilation stubs and a missed code review comment fixup on the nomadik pin controller" * tag 'pinctrl-fixes-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/nomadik: always use the simple irqdomain pinctrl/nomadik: provide stubs for legacy Nomadik pinctrl: remove duplicated include from pinctrl-xway.c pinctrl: sirf: remove sirfsoc_gpio_set_pull function pinctrl: fix return value in bcm2835_pinctrl_probe() pinctrl: remove duplicated include from pinctrl-bcm2835.c pinctrl: bcm2835: Use existing pointer to struct device pinctrl: samsung: use __devinit section for init code
-
Linus Torvalds authored
Merge emailed patches from Corey Minyard: "Remove some bogus docs, Fix ACPI/IPMI interactions, fix some warnings, and add register spacing detection for PCI interfaces." * ipmi: IPMI: Detect register spacing on PCI interfaces IPMI: Fix some uninitialized warning IPMI: Change link order ACPI: Reorder IPMI driver before any other ACPI drivers IPMI: Remove SMBus driver info from the docs
-
Corey Minyard authored
The IPMI spec defines a way to detect register spacing for PCI interfaces, so implement it. Signed-off-by:
Steven Hsieh <sshsieh@broadcom.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Corey Minyard authored
There was a spot where the compiler couldn't tell some variables would be set. So initialize them to make the warning go away. Signed-off-by:
-
Matthew Garrett authored
IPMI must be initialised before ACPI in order to ensure that any IPMI services are available before ACPI driver initialisation attempts to use any IPMI operation regions. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Matthew Garrett authored
Drivers may make calls that require the ACPI IPMI driver to have been initialised already, so make sure that it appears earlier in the build order. Signed-off-by:
-
Corey Minyard authored
Some documentation for the SMBus driver is in the IPMI docs, but that code is not in the kernel tree at this point. So remove the docs to avoid confusion. Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
Bryan Wu <cooloney@gmail.com> Signed-off-by:
-
David Rientjes authored
When reading /proc/pid/numa_maps, it's possible to return the contents of the stack where the mempolicy string should be printed if the policy gets freed from beneath us. This happens because mpol_to_str() may return an error the stack-allocated buffer is then printed without ever being stored. There are two possible error conditions in mpol_to_str(): - if the buffer allocated is insufficient for the string to be stored, and - if the mempolicy has an invalid mode. The first error condition is not triggered in any of the callers to mpol_to_str(): at least 50 bytes is always allocated on the stack and this is sufficient for the string to be written. A future patch should convert this into BUILD_BUG_ON() since we know the maximum strlen possible, but that's not -rc material. The second error condition is possible if a race occurs in dropping a reference to a task's mempolicy causing it to be freed during the read(). The slab poison value is then used for the mode and mpol_to_str() returns -EINVAL. This race is only possible because get_vma_policy() believes that mm->mmap_sem protects task->mempolicy, which isn't true. The exit path does not hold mm->mmap_sem when dropping the reference or setting task->mempolicy to NULL: it uses task_lock(task) instead. Thus, it's required for the caller of a task mempolicy to hold task_lock(task) while grabbing the mempolicy and reading it. Callers with a vma policy store their mempolicy earlier and can simply increment the reference count so it's guaranteed not to be freed. Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
- 16 Oct, 2012 3 commits
-
-
Al Viro authored
Had not been used for more than a decade and half; it used to be a part of (in-kernel) ->select() API and it has been pining for fjords since 2.1.23pre1. This is an ex-parrot... Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
There are some bits of linux/fs.h which are only used within the kernel and shouldn't be in the UAPI. Move these from uapi/linux/fs.h into linux/fs.h. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Al Viro authored
replace_fd() began with "eats a reference, tries to insert into descriptor table" semantics; at some point I'd switched it to much saner current behaviour ("try to insert into descriptor table, grabbing a new reference if inserted; caller should do fput() in any case"), but forgot to update the callers. Mea culpa... [Spotted by Pavel Roskin, who has really weird system with pipe-fed coredumps as part of what he considers a normal boot ;-)] Signed-off-by:
-
- 15 Oct, 2012 13 commits
-
-
David Rientjes authored
Commit 02361418 ("thermal: add generic cpufreq cooling implementation") requires cpufreq_frequency_get_table(), but that function is only defined for CONFIG_CPU_FREQ_TABLE resulting in the following build error: drivers/built-in.o: In function `cpufreq_get_max_state': drivers/thermal/cpu_cooling.c:259: undefined reference to `cpufreq_frequency_get_table' drivers/built-in.o: In function `get_cpu_frequency': drivers/thermal/cpu_cooling.c:129: undefined reference to `cpufreq_frequency_get_table' Fix it by selecting CONFIG_CPU_FREQ_TABLE for such a configuration. It turns out CONFIG_EXYNOS_THERMAL also needs CONFIG_CPU_FREQ_TABLE, so select it there as well. Signed-off-by:
-
Michal Marek authored
Commit fe04ddf7 ("kbuild: Do not package /boot and /lib in make tar-pkg") accidentally reverted two previous kbuild commits. I don't know what I was thinking. This brings back changes made by commits 24cc7fb6 ("x86/kbuild: archscripts depends on scripts_basic") and c1c1a59e ("firmware: fix directory creation rule matching with make 3.80") Reported-by:
Jan Beulich <JBeulich@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Randy Dunlap authored
Update file paths in Documentation/DocBook/networking.tmpl for uapi headers. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Ralf Baechle authored
Certain configurations won't implicitly pull in <linux/pagemap.h> resulting in the following build error: mm/huge_memory.c: In function 'release_pte_page': mm/huge_memory.c:1697:2: error: implicit declaration of function 'unlock_page' [-Werror=implicit-function-declaration] mm/huge_memory.c: In function '__collapse_huge_page_isolate': mm/huge_memory.c:1757:3: error: implicit declaration of function 'trylock_page' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Reported-by:
David Daney <david.daney@cavium.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Russell King authored
Daniel Mack reports an oops at boot with the latest kernels: Internal error: Oops - undefined instruction: 0 [#1] SMP THUMB2 Modules linked in: CPU: 0 Not tainted (3.6.0-11057-g584df1d #145) PC is at cpsw_probe+0x45a/0x9ac LR is at trace_hardirqs_on_caller+0x8f/0xfc pc : [<c03493de>] lr : [<c005e81f>] psr: 60000113 sp : cf055fb0 ip : 00000000 fp : 00000000 r10: 00000000 r9 : 00000000 r8 : 00000000 r7 : 00000000 r6 : 00000000 r5 : c0344555 r4 : 00000000 r3 : cf057a40 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 50c5387d Table: 8f3f4019 DAC: 00000015 Process init (pid: 1, stack limit = 0xcf054240) Stack: (0xcf055fb0 to 0xcf056000) 5fa0: 00000001 00000000 00000000 00000000 5fc0: cf055fb0 c000d1a8 00000000 00000000 00000000 00000000 00000000 00000000 5fe0: 00000000 be9b3f10 00000000 b6f6add0 00000010 00000000 aaaabfaf a8babbaa The analysis of this is as follows. In init/main.c, we issue: kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND); This creates a new thread, which falls through to the ret_from_fork assembly, with r4 set NULL and r5 set to kernel_init. You can see this in your oops dump register set - r5 is 0xc0344555, which is the address of kernel_init plus 1 which marks the function as Thumb code. Now, let's look at this code a little closer - this is what the disassembly looks like: c000d180 <ret_from_fork>: c000d180: f03a fe08 bl c0047d94 <schedule_tail> c000d184: 2d00 cmp r5, #0 c000d186: bf1e ittt ne c000d188: 4620 movne r0, r4 c000d18a: 46fe movne lr, pc <-- XXXXXXX c000d18c: 46af movne pc, r5 c000d18e: 46e9 mov r9, sp c000d190: ea4f 3959 mov.w r9, r9, lsr #13 c000d194: ea4f 3949 mov.w r9, r9, lsl #13 c000d198: e7c8 b.n c000d12c <ret_to_user> c000d19a: bf00 nop c000d19c: f3af 8000 nop.w This code was introduced in 9fff2fa0 (arm: switch to saner kernel_execve() semantics). I have marked one instruction, and it's the significant one - I'll come back to that later. Eventually, having had a successful call to kernel_execve(), kernel_init() returns zero. In returning, it uses the value in 'lr' which was set by the instruction I marked above. Unfortunately, this causes lr to contain 0xc000d18e - an even address. This switches the ISA to ARM on return but with a non word aligned PC value. So, what do we end up executing? Well, not the instructions above - yes the opcodes, but they don't mean the same thing in ARM mode. In ARM mode, it looks like this instead: c000d18c: 46e946af strbtmi r4, [r9], pc, lsr #13 c000d190: 3959ea4f ldmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^ c000d194: 3949ea4f stmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^ c000d198: bf00e7c8 svclt 0x0000e7c8 c000d19c: 8000f3af andhi pc, r0, pc, lsr #7 c000d1a0: e88db092 stm sp, {r1, r4, r7, ip, sp, pc} c000d1a4: 46e81fff ; <UNDEFINED> instruction: 0x46e81fff c000d1a8: 8a00f3ef bhi 0xc004a16c c000d1ac: 0a0cf08a beq 0xc03493dc I have included more above, because it's relevant. The PSR flags which we can see in the oops dump are nZCv, so Z and C are set. All the above ARM instructions are not executed, except for two. c000d1a0, which has no writeback, and writes below the current stack pointer (and that data is lost when we take the next exception.) The other instruction which is executed is c000d1ac, which takes us to... 0xc03493dc. However, remember that bit 1 of the PC got set. So that makes the PC value 0xc03493de. And that value is the value we find in the oops dump for PC. What is the instruction here when interpreted in ARM mode? 0: f71e150c ; <UNDEFINED> instruction: 0xf71e150c and there we have our undefined instruction (remember that the 'never' condition code, 0xf, has been deprecated and is now always executed as it is now being used for additional instructions.) This path also nicely explains the state of the stack we see in the oops dump too. The above is a consistent and sane story for how we got to the oops dump, which all stems from the instruction at 0xc000d18a being wrong. Reported-by:
Daniel Mack <zonque@gmail.com> Tested-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Linus Walleij authored
Since the simple irqdomain will fall back to a linear domain if the first_irq provided is <= 0, just use this, just make sure the first_irq is negative in the device tree case. Cc: Rob Herring <rob.herring@calxeda.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
The compilation of the pinctrl driver failed on the legacy Nomadik NHK8815 platform because it was not providing the PRCMU interfaces needed to support the extended alternate functions used by the ux500 series. Solve this by providing some stubs for the legacy platform, to avoid too much #ifdefs in the code per se. Theoretically this actually allows the Nomadik and Ux500 to have a single kernel image with support for the PRCM registers on the Ux500 (though they have incompatible archs, but the spirit is there). Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Wei Yongjun authored
Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Arnd Bergmann authored
The prima2 platform advertises needing no mach/gpio.h header file, but its pinctrl driver now has a sirfsoc_gpio_set_pull function that uses constants defined in arch/arm/mach-prima2/include/mach/gpio.h, which fails to build. Fortunately, the sirfsoc_gpio_set_pull is not used anywhere in the kernel, so we can safely remove it. Any out of tree drivers using it will have to be converted to use proper pinctrl functions to do the same. Without this patch, building prima2_defconfig results in: drivers/pinctrl/pinctrl-sirf.c: In function 'sirfsoc_gpio_set_pull': drivers/pinctrl/pinctrl-sirf.c:1331:7: error: 'SIRFSOC_GPIO_PULL_NONE' undeclared (first use in this function) drivers/pinctrl/pinctrl-sirf.c:1331:7: note: each undeclared identifier is reported only once for each function it appears in drivers/pinctrl/pinctrl-sirf.c:1334:7: error: 'SIRFSOC_GPIO_PULL_UP' undeclared (first use in this function) drivers/pinctrl/pinctrl-sirf.c:1338:7: error: 'SIRFSOC_GPIO_PULL_DOWN' undeclared (first use in this function) Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
-
Wei Yongjun authored
In case of error, the function pinctrl_register() returns NULL not ERR_PTR(). The PTR_ERR() in the return value should be replaced with error no. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by:
Stephen Warren <swarren@wwwdotorg.org> Signed-off-by:
-
Wei Yongjun authored
Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by:
-
Tobias Klauser authored
The pointer to "pdev->dev" is already stored in "dev", so use it in devm_request_and_ioremap(). Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Acked-by:
-
Arnd Bergmann authored
The samsung pinctrl driver has a probe function that is __devinit and that calls a lot of other functions that are marked __init, which kbuild complains about. Marking everything __devinit means that the code does not discarded when CONFIG_HOTPLUG is set, which is a little more wasteful, but also more consistent Without this patch, building exynos_defconfig results in: WARNING: drivers/pinctrl/built-in.o(.devinit.text+0x124): Section mismatch in reference from the function samsung_pinctrl_probe() to the function .init.text:samsung_gpiolib_register() The function __devinit samsung_pinctrl_probe() references a function __init samsung_gpiolib_register(). If samsung_gpiolib_register is only used by samsung_pinctrl_probe then annotate samsung_gpiolib_register with a matching annotation. Signed-off-by:
-
- 14 Oct, 2012 6 commits
-
-
Linus Torvalds authored
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS update from Ralf Baechle: "Cleanups and fixes for breakage that occured earlier during this merge phase. Also a few patches that didn't make the first pull request. Of those is the Alchemy work that merges code for many of the SOCs and evaluation boards thus among other code shrinkage, reduces the number of MIPS defconfigs by 5." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits) MIPS: SNI: Switch RM400 serial to SCCNXP driver MIPS: Remove unused empty_bad_pmd_table[] declaration. MIPS: MT: Remove kspd. MIPS: Malta: Fix section mismatch. MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets. MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code. MIPS: Alchemy: merge PB1550 support into DB1550 code MIPS: Alchemy: Single kernel for DB1200/1300/1550 MIPS: Optimize TLB refill for RI/XI configurations. MIPS: proc: Cleanup printing of ASEs. MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required. MIPS: Add detection of DSP ASE Revision 2. MIPS: Optimize pgd_init and pmd_init MIPS: perf: Add perf functionality for BMIPS5000 MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP MIPS: perf: Remove unnecessary #ifdef MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt) MIPS: perf: Change the "mips_perf_event" table unsupported indicator. MIPS: Align swapper_pg_dir to 64K for better TLB Refill code. vmlinux.lds.h: Allow architectures to add sections to the front of .bss ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull module signing support from Rusty Russell: "module signing is the highlight, but it's an all-over David Howells frenzy..." Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG. * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits) X.509: Fix indefinite length element skip error handling X.509: Convert some printk calls to pr_devel asymmetric keys: fix printk format warning MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking MODSIGN: Make mrproper should remove generated files. MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs MODSIGN: Use the same digest for the autogen key sig as for the module sig MODSIGN: Sign modules during the build process MODSIGN: Provide a script for generating a key ID from an X.509 cert MODSIGN: Implement module signature checking MODSIGN: Provide module signing public keys to the kernel MODSIGN: Automatically generate module signing keys if missing MODSIGN: Provide Kconfig options MODSIGN: Provide gitignore and make clean rules for extra files MODSIGN: Add FIPS policy module: signature checking hook X.509: Add a crypto key parser for binary (DER) X.509 certificates MPILIB: Provide a function to read raw data into an MPI X.509: Add an ASN.1 decoder X.509: Add simple ASN.1 grammar compiler ...
-
Matt Fleming authored
The hostprogs need access to the CONFIG_* symbols found in include/generated/autoconf.h. But commit abbf1590 ("UAPI: Partition the header include path sets and add uapi/ header directories") replaced $(LINUXINCLUDE) with $(USERINCLUDE) which doesn't contain the necessary include paths. This has the undesirable effect of breaking the EFI boot stub because the #ifdef CONFIG_EFI_STUB code in arch/x86/boot/tools/build.c is never compiled. It should also be noted that because $(USERINCLUDE) isn't exported by the top-level Makefile it's actually empty in arch/x86/boot/Makefile. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Ingo Molnar authored
The UAPI commits forgot to test tooling builds such as tools/perf/, and this fixes the fallout. Manual conversion. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM update from Russell King: "This is the final round of stuff for ARM, left until the end of the merge window to reduce the number of conflicts. This set contains the ARM part of David Howells UAPI changes, and a fix to the ordering of 'select' statements in ARM Kconfig files (see the appropriate commit for why this happened - thanks to Andrew Morton for pointing out the problem.) I've left this as long as I dare for this window to avoid conflicts, and I regenerated the config patch yesterday, posting it to our mailing list for review and testing. I have several acks which include successful test reports for it. However, today I notice we've got new conflicts with previously unseen code... though that conflict should be trivial (it's my changes vs a one liner.)" * 'late-for-linus' of git://git.linaro.org/people/rmk/linux-arm: ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate arch/arm/include/asm Fix up fairly conflict in arch/arm/Kconfig (the select re-organization vs recent addition of GENERIC_KERNEL_EXECVE)
-
- 13 Oct, 2012 7 commits
-
-
git://git.infradead.org/users/dhowells/linux-headersLinus Torvalds authored
Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells: "The patches contained herein do the following: (1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI. I checked this with Paul Mackerras before I created the patch and he suggested some extra bits to unexport. (2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace applicable, and remove from the UAPI that part of linux/fs.h that was the reason for linux/blk_types.h being exported in the first place. I discussed this with Jens Axboe before creating the patch. (3) The big patch of the series to disintegrate include/linux/*.h as a unit. This could be split up, though there would be collisions in moving stuff between the two Kbuild files when the parts are merged as that file is sorted alphabetically rather than being grouped by subsystem. Of this set of headers, 17 files have changed in the UAPI exported region since the 4th and only 8 since the 9th so there isn't much change in this area - as one might expect. It should be pretty obvious and straightforward if it does come to fixing up: stuff in __KERNEL__ guards stays where it is and stuff outside moves to the same file in the include/uapi/linux/ directory. If a new file appears then things get a bit more complicated as the "headers +=" line has to move to include/uapi/linux/Kbuild. Only one new file has appeared since the 9th and I judge this type of event relatively unlikely. (4) A patch to disintegrate include/linux/byteorder/*.h as a unit. Signed-off-by: David Howells <dhowells@redhat.com>" * tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h -
git://git.infradead.org/users/dhowells/linux-headersLinus Torvalds authored
Pull spi UAPI disintegration from David Howells: "This is to complete part of the Userspace API (UAPI) disintegration for which the preparatory patches were pulled recently. After these patches, userspace headers will be segregated into: include/uapi/linux/.../foo.h for the userspace interface stuff, and: include/linux/.../foo.h for the strictly kernel internal stuff. Signed-off-by: -
git://openrisc.net/jonas/linuxLinus Torvalds authored
Pull OpenRISC uapi disintegration from Jonas Bonn: "OpenRISC UAPI disintegration work from David Howells" * tag 'openrisc-uapi' of git://openrisc.net/jonas/linux: UAPI: (Scripted) Disintegrate arch/openrisc/include/asm
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull user namespace compile fixes from Eric W Biederman: "This tree contains three trivial fixes. One compiler warning, one thinko fix, and one build fix" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md updates from NeilBrown: - "discard" support, some dm-raid improvements and other assorted bits and pieces. * tag 'md-3.7' of git://neil.brown.name/md: (29 commits) md: refine reporting of resync/reshape delays. md/raid5: be careful not to resize_stripes too big. md: make sure manual changes to recovery checkpoint are saved. md/raid10: use correct limit variable md: writing to sync_action should clear the read-auto state. Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races md/raid5: make sure to_read and to_write never go negative. md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write. md/raid5: protect debug message against NULL derefernce. md/raid5: add some missing locking in handle_failed_stripe. MD: raid5 avoid unnecessary zero page for trim MD: raid5 trim support md/bitmap:Don't use IS_ERR to judge alloc_page(). md/raid1: Don't release reference to device while handling read error. raid: replace list_for_each_continue_rcu with new interface add further __init annotations to crypto/xor.c DM RAID: Fix for "sync" directive ineffectiveness DM RAID: Fix comparison of index and quantity for "rebuild" parameter DM RAID: Add rebuild capability for RAID10 DM RAID: Move 'rebuild' checking code to its own function ...
-
Russell King authored
-
Russell King authored
The large platform selection choice should be sorted by option string so it's easy to find the platform you're looking for. Fix the few options which are out of this order. Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
