- 03 Apr, 2024 3 commits
-
-
Heiner Kallweit authored
On some boards with this chip version the BIOS is buggy and misses to reset the PHY page selector. This results in the PHY ID read accessing registers on a different page, returning a more or less random value. Fix this by resetting the page selector first. Fixes: f1e911d5 ("r8169: add basic phylib support") Cc: stable@vger.kernel.org Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/64f2055e-98b8-45ec-8568-665e3d54d4e6@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Marco Pinna authored
Commit 82dfb540 ("VSOCK: Add virtio vsock vsockmon hooks") added virtio_transport_deliver_tap_pkt() for handing packets to the vsockmon device. However, in virtio_transport_send_pkt_work(), the function is called before actually sending the packet (i.e. before placing it in the virtqueue with virtqueue_add_sgs() and checking whether it returned successfully). Queuing the packet in the virtqueue can fail even multiple times. However, in virtio_transport_deliver_tap_pkt() we deliver the packet to the monitoring tap interface only the first time we call it. This certainly avoids seeing the same packet replicated multiple times in the monitoring interface, but it can show the packet sent with the wrong timestamp or even before we succeed to queue it in the virtqueue. Move virtio_transport_deliver_tap_pkt() after calling virtqueue_add_sgs() and making sure it returned successfully. Fixes: 82dfb540 ("VSOCK: Add virtio vsock vsockmon hooks") Cc: stable@vge.kernel.org Signed-off-by:
Marco Pinna <marco.pinn95@gmail.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20240329161259.411751-1-marco.pinn95@gmail.comSigned-off-by:
-
Duoming Zhou authored
When the ax25 device is detaching, the ax25_dev_device_down() calls ax25_ds_del_timer() to cleanup the slave_timer. When the timer handler is running, the ax25_ds_del_timer() that calls del_timer() in it will return directly. As a result, the use-after-free bugs could happen, one of the scenarios is shown below: (Thread 1) | (Thread 2) | ax25_ds_timeout() ax25_dev_device_down() | ax25_ds_del_timer() | del_timer() | ax25_dev_put() //FREE | | ax25_dev-> //USE In order to mitigate bugs, when the device is detaching, use timer_shutdown_sync() to stop the timer. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Duoming Zhou <duoming@zju.edu.cn> Reviewed-by:
-
- 02 Apr, 2024 7 commits
-
-
Ivan Vecera authored
Commit 73d9629e ("i40e: Do not allow untrusted VF to remove administratively set MAC") fixed an issue where untrusted VF was allowed to remove its own MAC address although this was assigned administratively from PF. Unfortunately the introduced check is wrong because it causes that MAC filters for other MAC addresses including multi-cast ones are not removed. <snip> if (ether_addr_equal(addr, vf->default_lan_addr.addr) && i40e_can_vf_change_mac(vf)) was_unimac_deleted = true; else continue; if (i40e_del_mac_filter(vsi, al->list[i].addr)) { ... </snip> The else path with `continue` effectively skips any MAC filter removal except one for primary MAC addr when VF is allowed to do so. Fix the check condition so the `continue` is only done for primary MAC address. Fixes: 73d9629e ("i40e: Do not allow untrusted VF to remove administratively set MAC") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Reviewed-by:
Michal Schmidt <mschmidt@redhat.com> Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240329180638.211412-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: fix fallback MIB counter and wrong var in selftests Here are two fixes related to MPTCP. The first patch fixes when the MPTcpExtMPCapableFallbackACK MIB counter is modified: it should only be incremented when a connection was using MPTCP options, but then a fallback to TCP has been done. This patch also checks the counter is not incremented by mistake during the connect selftests. This counter was wrongly incremented since its introduction in v5.7. The second patch fixes a wrong parsing of the 'dev' endpoint options in the selftests: the wrong variable was used. This option was not used before, but it is going to be soon. This issue is visible since v5.18. ==================== Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-0-324a8981da48@kernel.orgSigned-off-by:
-
Geliang Tang authored
There's a bug in pm_nl_check_endpoint(), 'dev' didn't be parsed correctly. If calling it in the 2nd test of endpoint_tests() too, it fails with an error like this: creation [FAIL] expected '10.0.2.2 id 2 subflow dev dev' \ found '10.0.2.2 id 2 subflow dev ns2eth2' The reason is '$2' should be set to 'dev', not '$1'. This patch fixes it. Fixes: 69c6ce7b ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by:Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:
-
Davide Caratti authored
Current MPTCP servers increment MPTcpExtMPCapableFallbackACK when they accept non-MPC connections. As reported by Christoph, this is "surprising" because the counter might become greater than MPTcpExtMPCapableSYNRX. MPTcpExtMPCapableFallbackACK counter's name suggests it should only be incremented when a connection was seen using MPTCP options, then a fallback to TCP has been done. Let's do that by incrementing it when the subflow context of an inbound MPC connection attempt is dropped. Also, update mptcp_connect.sh kselftest, to ensure that the above MIB does not increment in case a pure TCP client connects to a MPTCP server. Fixes: fc518953 ("mptcp: add and use MIB counter infrastructure") Cc: stable@vger.kernel.org Reported-by:
Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/449Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Mat Martineau <martineau@kernel.org> Reviewed-by:
-
Paolo Abeni authored
Alexei reported the following splat: WARNING: CPU: 32 PID: 3276 at net/mptcp/subflow.c:1430 subflow_data_ready+0x147/0x1c0 Modules linked in: dummy bpf_testmod(O) [last unloaded: bpf_test_no_cfi(O)] CPU: 32 PID: 3276 Comm: test_progs Tainted: GO 6.8.0-12873-g2c43c33bfd23 Call Trace: <TASK> mptcp_set_rcvlowat+0x79/0x1d0 sk_setsockopt+0x6c0/0x1540 __bpf_setsockopt+0x6f/0x90 bpf_sock_ops_setsockopt+0x3c/0x90 bpf_prog_509ce5db2c7f9981_bpf_test_sockopt_int+0xb4/0x11b bpf_prog_dce07e362d941d2b_bpf_test_socket_sockopt+0x12b/0x132 bpf_prog_348c9b5faaf10092_skops_sockopt+0x954/0xe86 __cgroup_bpf_run_filter_sock_ops+0xbc/0x250 tcp_connect+0x879/0x1160 tcp_v6_connect+0x50c/0x870 mptcp_connect+0x129/0x280 __inet_stream_connect+0xce/0x370 inet_stream_connect+0x36/0x50 bpf_trampoline_6442491565+0x49/0xef inet_stream_connect+0x5/0x50 __sys_connect+0x63/0x90 __x64_sys_connect+0x14/0x20 The root cause of the issue is that bpf allows accessing mptcp-level proto_ops from a tcp subflow scope. Fix the issue detecting the problematic call and preventing any action. Reported-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/482 Fixes: 5684ab1a ("mptcp: give rcvlowat some love") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
Jakub Kicinski authored
The netdev CI runs in a VM and captures serial, so stdout and stderr get combined. Because there's a missing new line in stderr the test ends up corrupting KTAP: # Successok 1 selftests: net: reuseaddr_conflict which should have been: # Success ok 1 selftests: net: reuseaddr_conflict Fixes: 422d8dc6 ("selftest: add a reuseaddr test") Reviewed-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20240329160559.249476-1-kuba@kernel.orgSigned-off-by:
-
Aleksandr Mishin authored
In lan8814_get_sig_rx() and lan8814_get_sig_tx() ptp_parse_header() may return NULL as ptp_header due to abnormal packet type or corrupted packet. Fix this bug by adding ptp_header check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by:
Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240329061631.33199-1-amishin@t-argos.ruSigned-off-by:
-
- 29 Mar, 2024 30 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Bluetooth: Fix TOCTOU in HCI debugfs implementation - Bluetooth: hci_event: set the conn encrypted before conn establishes - Bluetooth: qca: fix device-address endianness - Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync * tag 'for-net-2024-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: Fix TOCTOU in HCI debugfs implementation Bluetooth: hci_event: set the conn encrypted before conn establishes Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync Bluetooth: qca: fix device-address endianness Bluetooth: add quirk for broken address properties arm64: dts: qcom: sc7180-trogdor: mark bluetooth address as broken dt-bindings: bluetooth: add 'qcom,local-bd-address-broken' Revert "Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT" ==================== Link: https://lore.kernel.org/r/20240329140453.2016486-1-luiz.dentz@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== tcp: Fix bind() regression and more tests. bhash2 has not been well tested for IPV6_V6ONLY option. This series fixes two regression around IPV6_V6ONLY, one of which has been there since bhash2 introduction, and another is introduced by a recent change. Also, this series adds as many tests as possible to catch regression easily. The baseline is 28044fc1~ which is pre-bhash2 commit. Tested on 28044fc1~: # PASSED: 132 / 132 tests passed. # Totals: pass:132 fail:0 xfail:0 xpass:0 skip:0 error:0 net.git: # FAILED: 125 / 132 tests passed. # Totals: pass:125 fail:7 xfail:0 xpass:0 skip:0 error:0 With this series: # PASSED: 132 / 132 tests passed. # Totals: pass:132 fail:0 xfail:0 xpass:0 skip:0 error:0 v1: https://lore.kernel.org/netdev/20240325181923.48769-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20240326204251.51301-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
This patch adds two tests using SO_REUSEADDR and SO_REUSEPORT and defines errno for each test case. SO_REUSEADDR/SO_REUSEPORT is set for the per-fixture two bind() calls. The notable pattern is the pair of v6only [::] and plain [::]. The two sockets are put into the same tb2, where per-bucket v6only flag would be useless to detect bind() conflict. Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240326204251.51301-9-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
bhash2 was not well tested for IPv6-only sockets. This patch adds test cases where we set IPV6_V6ONLY for per-fixture bind() calls if variant->ipv6_only[i] is true. Signed-off-by:
-
Kuniyuki Iwashima authored
In addtition to the two addresses defined in the fixtures, this patch add 6 more bind calls(): * 0.0.0.0 * 127.0.0.1 * :: * ::1 * ::ffff:0.0.0.0 * ::ffff:127.0.0.1 The first two per-fixture bind() calls control how inet_bind2_bucket is created, and the rest 6 bind() calls cover as many conflicting patterns as possible. Signed-off-by:
-
Kuniyuki Iwashima authored
We don't have bind() conflict tests for the same protocol pairs. Let's add them except for the same address pair, which will be covered by the following patch adding 6 more bind() calls for each test case. Signed-off-by:
-
Kuniyuki Iwashima authored
Currently, bind_wildcard.c calls bind() twice for two addresses and checks the pre-defined errno against the 2nd call. Also, the two bind() calls are swapped to cover various patterns how bind buckets are created. However, only testing two addresses is insufficient to detect regression. So, we will add more bind() calls, and then, we need to define different errno for each bind() per test case. As a prepartion, let's define the reverse order bind() test cases as fixtures. No functional changes are intended. Signed-off-by:
-
Kuniyuki Iwashima authored
Currently, bind_wildcard.c tests only (IPv4, IPv6) pairs, but we will add more tests for the same protocol pairs. This patch makes it possible by changing the address pointer to void. No functional changes are intended. Signed-off-by:
-
Kuniyuki Iwashima authored
Jianguo Wu reported another bind() regression introduced by bhash2. Calling bind() for the following 3 addresses on the same port, the 3rd one should fail but now succeeds. 1. 0.0.0.0 or ::ffff:0.0.0.0 2. [::] w/ IPV6_V6ONLY 3. IPv4 non-wildcard address or v4-mapped-v6 non-wildcard address The first two bind() create tb2 like this: bhash2 -> tb2(:: w/ IPV6_V6ONLY) -> tb2(0.0.0.0) The 3rd bind() will match with the IPv6 only wildcard address bucket in inet_bind2_bucket_match_addr_any(), however, no conflicting socket exists in the bucket. So, inet_bhash2_conflict() will returns false, and thus, inet_bhash2_addr_any_conflict() returns false consequently. As a result, the 3rd bind() bypasses conflict check, which should be done against the IPv4 wildcard address bucket. So, in inet_bhash2_addr_any_conflict(), we must iterate over all buckets. Note that we cannot add ipv6_only flag for inet_bind2_bucket as it would confuse the following patetrn. 1. [::] w/ SO_REUSE{ADDR,PORT} and IPV6_V6ONLY 2. [::] w/ SO_REUSE{ADDR,PORT} 3. IPv4 non-wildcard address or v4-mapped-v6 non-wildcard address The first bind() would create a bucket with ipv6_only flag true, the second bind() would add the [::] socket into the same bucket, and the third bind() could succeed based on the wrong assumption that ipv6_only bucket would not conflict with v4(-mapped-v6) address. Fixes: 28044fc1 ("net: Add a bhash2 table hashed by port and address") Diagnosed-by:Jianguo Wu <wujianguo106@163.com> Signed-off-by:
-
Kuniyuki Iwashima authored
Commit 5e07e672 ("tcp: Use bhash2 for v4-mapped-v6 non-wildcard address.") introduced bind() regression for v4-mapped-v6 address. When we bind() the following two addresses on the same port, the 2nd bind() should succeed but fails now. 1. [::] w/ IPV6_ONLY 2. ::ffff:127.0.0.1 After the chagne, v4-mapped-v6 uses bhash2 instead of bhash to detect conflict faster, but I forgot to add a necessary change. During the 2nd bind(), inet_bind2_bucket_match_addr_any() returns the tb2 bucket of [::], and inet_bhash2_conflict() finally calls inet_bind_conflict(), which returns true, meaning conflict. inet_bhash2_addr_any_conflict |- inet_bind2_bucket_match_addr_any <-- return [::] bucket `- inet_bhash2_conflict `- __inet_bhash2_conflict <-- checks IPV6_ONLY for AF_INET | but not for v4-mapped-v6 address `- inet_bind_conflict <-- does not check address inet_bind_conflict() does not check socket addresses because __inet_bhash2_conflict() is expected to do so. However, it checks IPV6_V6ONLY attribute only against AF_INET socket, and not for v4-mapped-v6 address. As a result, v4-mapped-v6 address conflicts with v6-only wildcard address. To avoid that, let's add the missing test to use bhash2 for v4-mapped-v6 address. Fixes: 5e07e672 ("tcp: Use bhash2 for v4-mapped-v6 non-wildcard address.") Signed-off-by:
-
Eric Dumazet authored
syzbot reported a problem in ip6erspan_rcv() [1] Issue is that ip6erspan_rcv() (and erspan_rcv()) no longer make sure erspan_base_hdr is present in skb linear part (skb->head) before getting @ver field from it. Add the missing pskb_may_pull() calls. v2: Reload iph pointer in erspan_rcv() after pskb_may_pull() because skb->head might have changed. [1] BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2756 [inline] BUG: KMSAN: uninit-value in ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] BUG: KMSAN: uninit-value in gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] pskb_may_pull include/linux/skbuff.h:2756 [inline] ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 ip6_protocol_deliver_rcu+0x1d4c/0x2ca0 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish+0x955/0x970 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xde/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5538 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5652 netif_receive_skb_internal net/core/dev.c:5738 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5798 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1549 tun_get_user+0x5566/0x69e0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1525 [inline] tun_get_user+0x209a/0x69e0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 5045 Comm: syz-executor114 Not tainted 6.9.0-rc1-syzkaller-00021-g96249052 #0 Fixes: cb73ee40 ("net: ip_gre: use erspan key field for tunnel lookup") Reported-by: syzbot+1c1cf138518bf0c53d68@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/000000000000772f2c0614b66ef7@google.com/Signed-off-by:Eric Dumazet <edumazet@google.com> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/20240328112248.1101491-1-edumazet@google.comSigned-off-by:
-
Atlas Yu authored
On devices that support DASH, the current code in the "rtl_loop_wait" function raises false alarms when DASH is disabled. This occurs because the function attempts to wait for the DASH firmware to be ready, even though it's not relevant in this case. r8169 0000:0c:00.0 eth0: RTL8168ep/8111ep, 38:7c:76:49:08:d9, XID 502, IRQ 86 r8169 0000:0c:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] r8169 0000:0c:00.0 eth0: DASH disabled ... r8169 0000:0c:00.0 eth0: rtl_ep_ocp_read_cond == 0 (loop: 30, delay: 10000). This patch modifies the driver start/stop functions to skip checking the DASH firmware status when DASH is explicitly disabled. This prevents unnecessary delays and false alarms. The patch has been tested on several ThinkStation P8/PX workstations. Fixes: 0ab0c45d ("r8169: add handling DASH when DASH is disabled") Signed-off-by:
Atlas Yu <atlas.yu@canonical.com> Reviewed-by:
-
Su Hui authored
otx2_rxtx_enable() return negative error code such as -EIO, check -EIO rather than EIO to fix this problem. Fixes: c9262522 ("octeontx2-pf: Disable packet I/O for graceful exit") Signed-off-by:
Su Hui <suhui@nfschina.com> Reviewed-by:
Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/20240328020620.4054692-1-suhui@nfschina.comSigned-off-by:
-
Eric Dumazet authored
There is no reason to consume a full cacheline to store system_page_pool. We can eventually move it to softnet_data later for full locality control. Fixes: 2b0cfa6e ("net: add generic percpu page_pool allocator") Signed-off-by:
Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20240328173448.2262593-1-edumazet@google.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-26 (i40e) This series contains updates to i40e driver only. Ivan Vecera resolves an issue where descriptors could be missed when exiting busy poll. Aleksandr corrects counting of MAC filters to only include new or active filters and resolves possible use of incorrect/stale 'vf' variable. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: fix vf may be used uninitialized in this function warning i40e: fix i40e_count_filters() to count only active/new filters i40e: Enforce software interrupt during busy-poll exit ==================== Link: https://lore.kernel.org/r/20240326162358.1224145-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Mahmoud Adam authored
cp might be null, calling cp->cp_conn would produce null dereference [Simon Horman adds:] Analysis: * cp is a parameter of __rds_rdma_map and is not reassigned. * The following call-sites pass a NULL cp argument to __rds_rdma_map() - rds_get_mr() - rds_get_mr_for_dest * Prior to the code above, the following assumes that cp may be NULL (which is indicative, but could itself be unnecessary) trans_private = rs->rs_transport->get_mr( sg, nents, rs, &mr->r_key, cp ? cp->cp_conn : NULL, args->vec.addr, args->vec.bytes, need_odp ? ODP_ZEROBASED : ODP_NOT_NEEDED); * The code modified by this patch is guarded by IS_ERR(trans_private), where trans_private is assigned as per the previous point in this analysis. The only implementation of get_mr that I could locate is rds_ib_get_mr() which can return an ERR_PTR if the conn (4th) argument is NULL. * ret is set to PTR_ERR(trans_private). rds_ib_get_mr can return ERR_PTR(-ENODEV) if the conn (4th) argument is NULL. Thus ret may be -ENODEV in which case the code in question will execute. Conclusion: * cp may be NULL at the point where this patch adds a check; this patch does seem to address a possible bug Fixes: c055fc00 ("net/rds: fix WARNING in rds_conn_connect_if_down") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Mahmoud Adam <mngyadam@amazon.com> Reviewed-by:
-
Michael Krummsdorf authored
The switch has 4 ports with 2 internal PHYs, but ports are numbered up to 6, with ports 0, 1, 5 and 6 being usable. Fixes: 71d94a43 ("net: dsa: mv88e6xxx: add support for MV88E6020 switch") Signed-off-by:
Michael Krummsdorf <michael.krummsdorf@tq-group.com> Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by:
-
David Thompson authored
The mlxbf_gige driver intermittantly encounters a NULL pointer exception while the system is shutting down via "reboot" command. The mlxbf_driver will experience an exception right after executing its shutdown() method. One example of this exception is: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000011d373000 [0000000000000070] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] SMP CPU: 0 PID: 13 Comm: ksoftirqd/0 Tainted: G S OE 5.15.0-bf.6.gef6992a #1 Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.0.2.12669 Apr 21 2023 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] lr : mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] sp : ffff8000080d3c10 x29: ffff8000080d3c10 x28: ffffcce72cbb7000 x27: ffff8000080d3d58 x26: ffff0000814e7340 x25: ffff331cd1a05000 x24: ffffcce72c4ea008 x23: ffff0000814e4b40 x22: ffff0000814e4d10 x21: ffff0000814e4128 x20: 0000000000000000 x19: ffff0000814e4a80 x18: ffffffffffffffff x17: 000000000000001c x16: ffffcce72b4553f4 x15: ffff80008805b8a7 x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101 x11: 7f7f7f7f7f7f7f7f x10: c2ac898b17576267 x9 : ffffcce720fa5404 x8 : ffff000080812138 x7 : 0000000000002e9a x6 : 0000000000000080 x5 : ffff00008de3b000 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] __napi_poll+0x40/0x1c8 net_rx_action+0x314/0x3a0 __do_softirq+0x128/0x334 run_ksoftirqd+0x54/0x6c smpboot_thread_fn+0x14c/0x190 kthread+0x10c/0x110 ret_from_fork+0x10/0x20 Code: 8b070000 f9000ea0 f95056c0 f86178a1 (b9407002) ---[ end trace 7cc3941aa0d8e6a4 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x4ce722520000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x000005c1,a3330e5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- During system shutdown, the mlxbf_gige driver's shutdown() is always executed. However, the driver's stop() method will only execute if networking interface configuration logic within the Linux distribution has been setup to do so. If shutdown() executes but stop() does not execute, NAPI remains enabled and this can lead to an exception if NAPI is scheduled while the hardware interface has only been partially deinitialized. The networking interface managed by the mlxbf_gige driver must be properly stopped during system shutdown so that IFF_UP is cleared, the hardware interface is put into a clean state, and NAPI is fully deinitialized. Fixes: f92e1869 ("Add Mellanox BlueField Gigabit Ethernet driver") Signed-off-by:
David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20240325210929.25362-1-davthompson@nvidia.comSigned-off-by:
-
Bastien Nocera authored
struct hci_dev members conn_info_max_age, conn_info_min_age, le_conn_max_interval, le_conn_min_interval, le_adv_max_interval, and le_adv_min_interval can be modified from the HCI core code, as well through debugfs. The debugfs implementation, that's only available to privileged users, will check for boundaries, making sure that the minimum value being set is strictly above the maximum value that already exists, and vice-versa. However, as both minimum and maximum values can be changed concurrently to us modifying them, we need to make sure that the value we check is the value we end up using. For example, with ->conn_info_max_age set to 10, conn_info_min_age_set() gets called from vfs handlers to set conn_info_min_age to 8. In conn_info_min_age_set(), this goes through: if (val == 0 || val > hdev->conn_info_max_age) return -EINVAL; Concurrently, conn_info_max_age_set() gets called to set to set the conn_info_max_age to 7: if (val == 0 || val > hdev->conn_info_max_age) return -EINVAL; That check will also pass because we used the old value (10) for conn_info_max_age. After those checks that both passed, the struct hci_dev access is mutex-locked, disabling concurrent access, but that does not matter because the invalid value checks both passed, and we'll end up with conn_info_min_age = 8 and conn_info_max_age = 7 To fix this problem, we need to lock the structure access before so the check and assignment are not interrupted. This fix was originally devised by the BassCheck[1] team, and considered the problem to be an atomicity one. This isn't the case as there aren't any concerns about the variable changing while we check it, but rather after we check it parallel to another change. This patch fixes CVE-2024-24858 and CVE-2024-24857. [1] https://sites.google.com/view/basscheck/Co-developed-by:
Gui-Dong Han <2045gemini@gmail.com> Signed-off-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Hui Wang authored
We have a BT headset (Lenovo Thinkplus XT99), the pairing and connecting has no problem, once this headset is paired, bluez will remember this device and will auto re-connect it whenever the device is powered on. The auto re-connecting works well with Windows and Android, but with Linux, it always fails. Through debugging, we found at the rfcomm connection stage, the bluetooth stack reports "Connection refused - security block (0x0003)". For this device, the re-connecting negotiation process is different from other BT headsets, it sends the Link_KEY_REQUEST command before the CONNECT_REQUEST completes, and it doesn't send ENCRYPT_CHANGE command during the negotiation. When the device sends the "connect complete" to hci, the ev->encr_mode is 1. So here in the conn_complete_evt(), if ev->encr_mode is 1, link type is ACL and HCI_CONN_ENCRYPT is not set, we set HCI_CONN_ENCRYPT to this conn, and update conn->enc_key_size accordingly. After this change, this BT headset could re-connect with Linux successfully. This is the btmon log after applying the patch, after receiving the "Connect Complete" with "Encryption: Enabled", will send the command to read encryption key size: > HCI Event: Connect Request (0x04) plen 10 Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA) Class: 0x240404 Major class: Audio/Video (headset, speaker, stereo, video, vcr) Minor class: Wearable Headset Device Rendering (Printing, Speaker) Audio (Speaker, Microphone, Headset) Link type: ACL (0x01) ... > HCI Event: Link Key Request (0x17) plen 6 Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA) < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA) Link key: ${32-hex-digits-key} ... > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 256 Address: 8C:3C:AA:D8:11:67 (OUI 8C-3C-AA) Link type: ACL (0x01) Encryption: Enabled (0x01) < HCI Command: Read Encryption Key... (0x05|0x0008) plen 2 Handle: 256 < ACL Data TX: Handle 256 flags 0x00 dlen 10 L2CAP: Information Request (0x0a) ident 1 len 2 Type: Extended features supported (0x0002) > HCI Event: Command Complete (0x0e) plen 7 Read Encryption Key Size (0x05|0x0008) ncmd 1 Status: Success (0x00) Handle: 256 Key size: 16 Cc: stable@vger.kernel.org Link: https://github.com/bluez/bluez/issues/704Reviewed-by:Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by:
Luiz Augusto von Dentz <luiz.dentz@gmail.com> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
hci_cmd_sync_cancel_sync shall check the error passed to it since it will be propagated using req_result which is __u32 it needs to be properly set to a positive value if it was passed as negative othertise IS_ERR will not trigger as -(errno) would be converted to a positive value. Fixes: 63298d6e ("Bluetooth: hci_core: Cancel request on command timeout") Signed-off-by:
Thorsten Leemhuis <linux@leemhuis.info> Closes: https://lore.kernel.org/all/08275279-7462-4f4a-a0ee-8aa015f829bc@leemhuis.info/
-
Johan Hovold authored
The WCN6855 firmware on the Lenovo ThinkPad X13s expects the Bluetooth device address in big-endian order when setting it using the EDL_WRITE_BD_ADDR_OPCODE command. Presumably, this is the case for all non-ROME devices which all use the EDL_WRITE_BD_ADDR_OPCODE command for this (unlike the ROME devices which use a different command and expect the address in little-endian order). Reverse the little-endian address before setting it to make sure that the address can be configured using tools like btmgmt or using the 'local-bd-address' devicetree property. Note that this can potentially break systems with boot firmware which has started relying on the broken behaviour and is incorrectly passing the address via devicetree in big-endian order. The only device affected by this should be the WCN3991 used in some Chromebooks. As ChromeOS updates the kernel and devicetree in lockstep, the new 'qcom,local-bd-address-broken' property can be used to determine if the firmware is buggy so that the underlying driver bug can be fixed without breaking backwards compatibility. Set the HCI_QUIRK_BDADDR_PROPERTY_BROKEN quirk for such platforms so that the address is reversed when parsing the address property. Fixes: 5c0a1001 ("Bluetooth: hci_qca: Add helper to set device address") Cc: stable@vger.kernel.org # 5.1 Cc: Balakrishna Godavarthi <quic_bgodavar@quicinc.com> Cc: Matthias Kaehlcke <mka@chromium.org> Tested-by: Nikita Travkin <nikita@trvn.ru> # sc7180 Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Signed-off-by:
-
Johan Hovold authored
Some Bluetooth controllers lack persistent storage for the device address and instead one can be provided by the boot firmware using the 'local-bd-address' devicetree property. The Bluetooth devicetree bindings clearly states that the address should be specified in little-endian order, but due to a long-standing bug in the Qualcomm driver which reversed the address some boot firmware has been providing the address in big-endian order instead. Add a new quirk that can be set on platforms with broken firmware and use it to reverse the address when parsing the property so that the underlying driver bug can be fixed. Fixes: 5c0a1001 ("Bluetooth: hci_qca: Add helper to set device address") Cc: stable@vger.kernel.org # 5.1 Reviewed-by:
-
Johan Hovold authored
Several Qualcomm Bluetooth controllers lack persistent storage for the device address and instead one can be provided by the boot firmware using the 'local-bd-address' devicetree property. The Bluetooth bindings clearly states that the address should be specified in little-endian order, but due to a long-standing bug in the Qualcomm driver which reversed the address some boot firmware has been providing the address in big-endian order instead. The boot firmware in SC7180 Trogdor Chromebooks is known to be affected so mark the 'local-bd-address' property as broken to maintain backwards compatibility with older firmware when fixing the underlying driver bug. Note that ChromeOS always updates the kernel and devicetree in lockstep so that there is no need to handle backwards compatibility with older devicetrees. Fixes: 7ec3e673 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt") Cc: stable@vger.kernel.org # 5.10 Cc: Rob Clark <robdclark@chromium.org> Reviewed-by:
Bjorn Andersson <andersson@kernel.org> Reviewed-by:
-
Johan Hovold authored
Several Qualcomm Bluetooth controllers lack persistent storage for the device address and instead one can be provided by the boot firmware using the 'local-bd-address' devicetree property. The Bluetooth bindings clearly states that the address should be specified in little-endian order, but due to a long-standing bug in the Qualcomm driver which reversed the address some boot firmware has been providing the address in big-endian order instead. The only device out there that should be affected by this is the WCN3991 used in some Chromebooks. Add a 'qcom,local-bd-address-broken' property which can be set on these platforms to indicate that the boot firmware is using the wrong byte order. Note that ChromeOS always updates the kernel and devicetree in lockstep so that there is no need to handle backwards compatibility with older devicetrees. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Johan Hovold authored
This reverts commit 7dcd3e01. Qualcomm Bluetooth controllers like WCN6855 do not have persistent storage for the Bluetooth address and must therefore start as unconfigured to allow the user to set a valid address unless one has been provided by the boot firmware in the devicetree. A recent change snuck into v6.8-rc7 and incorrectly started marking the default (non-unique) address as valid. This specifically also breaks the Bluetooth setup for some user of the Lenovo ThinkPad X13s. Note that this is the second time Qualcomm breaks the driver this way and that this was fixed last year by commit 6945795b ("Bluetooth: fix use-bdaddr-property quirk"), which also has some further details. Fixes: 7dcd3e01 ("Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT") Cc: stable@vger.kernel.org # 6.8 Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Signed-off-by:
Clayton Craft <clayton@craftyguy.net> Tested-by:
-
Hariprasad Kelam authored
The current implementation for loading coalesced KPU profiles has a limitation. The "offset" field, which is used to locate profiles within the profile is restricted to a u16. This restricts the number of profiles that can be loaded. This patch addresses this limitation by increasing the size of the "offset" field. Fixes: 11c730bf ("octeontx2-af: support for coalescing KPU profiles") Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Antoine Tenart says: ==================== gro: various fixes related to UDP tunnels We found issues when a UDP tunnel endpoint is in a different netns than where UDP GRO happens. This kind of setup is actually quite diverse, from having one leg of the tunnel on a remove host, to having a tunnel between netns (eg. being bridged in another one or on the host). In our case that UDP tunnel was geneve. UDP tunnel packets should not be GROed at the UDP level. The fundamental issue here is such packet can't be detected in a foolproof way: we can't know by looking at a packet alone and the current logic of looking up UDP sockets is fragile (socket could be in another netns, packet could be modified in between, etc). Because there is no way to make the GRO code to correctly handle those packets in all cases, this series aims at two things: making the net stack to correctly behave (as in, no crash and no invalid packet) when such thing happens, and in some cases to prevent this "early GRO" from happening. First three patches fix issues when an "UDP tunneled" packet is being GROed too early by rx-udp-gro-forwarding or rx-gro-list. Last patch is preventing locally generated UDP tunnel packets from being GROed. This turns out to be more complex than this patch alone as it relies on skb->encapsulation which is currently untrusty in some cases (see iptunnel_handle_offloads); but that should fix things in practice and is acceptable for a fix. Future work is required to improve things (prevent all locally generated UDP tunnel packets from being GROed), such as fixing the misuse of skb->encapsulation in drivers; but that would be net-next material. Thanks! Antoine Since v3: - Fixed the udpgro_fwd selftest in patch 5 (Jakub Kicinski feedback). - Improved commit message on patch 3 (Willem de Bruijn feeback). Since v2: - Fixed a build issue with IPv6=m in patch 1 (Jakub Kicinski feedback). - Fixed typo in patch 1 (Nikolay Aleksandrov feedback). - Added Reviewed-by tag on patch 2 (Willem de Bruijn feeback). - Added back conversion to CHECKSUM_UNNECESSARY but only from non CHECKSUM_PARTIAL in patch 3 (Paolo Abeni & Willem de Bruijn feeback). - Reworded patch 3 commit msg. Since v1: - Fixed a build issue with IPv6 disabled in patch 1. - Reworked commit log in patch 2 (Willem de Bruijn feedback). - Added Reviewed-by tags on patches 1 & 4 (Willem de Bruijn feeback). ==================== Signed-off-by: -
Antoine Tenart authored
UDP tunnel packets can't be GRO in-between their endpoints as this causes different issues. The UDP GRO fwd vxlan tests were relying on this and their expectations have to be fixed. We keep both vxlan tests and expected no GRO from happening. The vxlan UDP GRO bench test was removed as it's not providing any valuable information now. Fixes: a062260a ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
-
Antoine Tenart authored
GRO has a fundamental issue with UDP tunnel packets as it can't detect those in a foolproof way and GRO could happen before they reach the tunnel endpoint. Previous commits have fixed issues when UDP tunnel packets come from a remote host, but if those packets are issued locally they could run into checksum issues. If the inner packet has a partial checksum the information will be lost in the GRO logic, either in udp4/6_gro_complete or in udp_gro_complete_segment and packets will have an invalid checksum when leaving the host. Prevent local UDP tunnel packets from ever being GROed at the outer UDP level. Due to skb->encapsulation being wrongly used in some drivers this is actually only preventing UDP tunnel packets with a partial checksum to be GROed (see iptunnel_handle_offloads) but those were also the packets triggering issues so in practice this should be sufficient. Fixes: 9fd1ff5d ("udp: Support UDP fraglist GRO/GSO.") Fixes: 36707061 ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets") Suggested-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
