Pull ARM cpufreq updates for v5.14-rc1 from Viresh Kumar:

"- Add frequency invariance support for CPPC driver again and related
   fixes/changes."

 - Minor changes/cleanups for Meditak driver (Fabien Parent and Seiya
   Wang), Qcom platform (Sibi Sankar), and SCMI driver (Christophe
   JAILLET).

 - New bindings for generic performance domains (Sudeep Holla).

 - Rename black/white-lists (Viresh Kumar)."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: CPPC: Add support for frequency invariance
  arch_topology: Avoid use-after-free for scale_freq_data
  cpufreq: CPPC: Pass structure instance by reference
  cpufreq: CPPC: Fix potential memleak in cppc_cpufreq_cpu_init
  dt-bindings: cpufreq: update cpu type and clock name for MT8173 SoC
  clk: mediatek: remove deprecated CLK_INFRA_CA57SEL for MT8173 SoC
  cpufreq: dt: Rename black/white-lists
  cpufreq: scmi: Fix an error message
  cpufreq: mediatek: add support for mt8365
  dt-bindings: dvfs: Add support for generic performance domains
  cpufreq: blacklist SC7280 in cpufreq-dt-platdev

The Frequency Invariance Engine (FIE) is providing a frequency scaling
correction factor that helps achieve more accurate load-tracking.

Normally, this scaling factor can be obtained directly with the help of
the cpufreq drivers as they know the exact frequency the hardware is
running at. But that isn't the case for CPPC cpufreq driver.

Another way of obtaining that is using the arch specific counter
support, which is already present in kernel, but that hardware is
optional for platforms.

This patch updates the CPPC driver to register itself with the topology
core to provide its own implementation (cppc_scale_freq_tick()) of
topology_scale_freq_tick() which gets called by the scheduler on every
tick. Note that the arch specific counters have higher priority than
CPPC counters, if available, though the CPPC driver doesn't need to have
any special handling for that.

On an invocation of cppc_scale_freq_tick(), we schedule an irq work
(since we reach here from hard-irq context), which then schedules a
normal work item and cppc_scale_freq_workfn() updates the per_cpu
arch_freq_scale variable based on the counter updates since the last
tick.

To allow platforms to disable this CPPC counter-based frequency
invariance support, this is all done under CONFIG_ACPI_CPPC_CPUFREQ_FIE,
which is enabled by default.

This also exports sched_setattr_nocheck() as the CPPC driver can be
built as a module.

Cc: linux-acpi@vger.kernel.org
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Currently topology_scale_freq_tick() (which gets called from
scheduler_tick()) may end up using a pointer to "struct
scale_freq_data", which was previously cleared by
topology_clear_scale_freq_source(), as there is no protection in place
here. The users of topology_clear_scale_freq_source() though needs a
guarantee that the previously cleared scale_freq_data isn't used
anymore, so they can free the related resources.

Since topology_scale_freq_tick() is called from scheduler tick, we don't
want to add locking in there. Use the RCU update mechanism instead
(which is already used by the scheduler's utilization update path) to
guarantee race free updates here.

synchronize_rcu() makes sure that all RCU critical sections that started
before it is called, will finish before it returns. And so the callers
of topology_clear_scale_freq_source() don't need to worry about their
callback getting called anymore.

Cc: Paul E. McKenney <paulmck@kernel.org>
Fixes: 01e055c1 ("arch_topology: Allow multiple entities to provide sched_freq_tick() callback")
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Don't pass structure instance by value, pass it by reference instead.
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

It's a classic example of memleak, we allocate something, we fail and
never free the resources.

Make sure we free all resources on policy ->init() failures.

Fixes: a28b2bfc ("cppc_cpufreq: replace per-cpu data array with a list")
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Commit e3c06236 ("cpufreq: add cpufreq_driver_resolve_freq()")
introduced this callback, back in 2016, for drivers that provide the
->target() callback.

The kernel hasn't seen a single user of it in the past 5 years and
it is not likely to be used any time soon.

Remove it for now.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

__cpufreq_driver_target() open codes cpufreq_driver_resolve_freq(), lets
make the former reuse the later.

Separate out __resolve_freq() to accept relation as well as an argument
and use it at both the locations.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Now that all users of ->stop_cpu() have been migrated to using other
callbacks, drop it from the core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor edits in the subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 367dc4aa ("cpufreq: Add stop CPU callback to cpufreq_driver
interface") added the ->stop_cpu() callback to allow the drivers to do
clean up before the CPU is completely down and its state can't be
modified.

At that time the CPU hotplug framework used to call the cpufreq core's
registered notifier for different events like CPU_DOWN_PREPARE and
CPU_POST_DEAD. The ->stop_cpu() callback was called during the
CPU_DOWN_PREPARE event.

This is no longer the case, cpuhp_cpufreq_offline() is called only
once by the CPU hotplug core now and we don't really need two
separate callbacks for cpufreq drivers, i.e. ->stop_cpu() and
->exit(), as everything can be done from the ->exit() callback
itself.

Migrate to using the ->exit() callback instead of ->stop_cpu().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 367dc4aa ("cpufreq: Add stop CPU callback to cpufreq_driver
interface") added the ->stop_cpu() callback to allow the drivers to do
clean up before the CPU is completely down and its state can't be
modified.

At that time the CPU hotplug framework used to call the cpufreq core's
registered notifier for different events like CPU_DOWN_PREPARE and
CPU_POST_DEAD. The ->stop_cpu() callback was called during the
CPU_DOWN_PREPARE event.

This is no longer the case, cpuhp_cpufreq_offline() is called only
once by the CPU hotplug core now and we don't really need two
separate callbacks for cpufreq drivers, i.e. ->stop_cpu() and
-<exit(), as everything can be done from the ->exit() callback
itself.

Migrate to using the ->exit() callback instead of ->stop_cpu().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor edits in the changelog and subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Combine the ->stop_cpu() and ->offline() callback routines for
intel_pstate in the active mode so as to avoid setting the
->stop_cpu callback pointer which is going to be dropped from
the framework.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Pull power management updates from Rafael Wysocki:
 "These add hybrid processors support to the intel_pstate driver and
  make it work with more processor models when HWP is disabled, make the
  intel_idle driver use special C6 idle state paremeters when package
  C-states are disabled, add cooling support to the tegra30 devfreq
  driver, rework the TEO (timer events oriented) cpuidle governor,
  extend the OPP (operating performance points) framework to use the
  required-opps DT property in more cases, fix some issues and clean up
  a number of assorted pieces of code.

  Specifics:

   - Make intel_pstate support hybrid processors using abstract
     performance units in the HWP interface (Rafael Wysocki).

   - Add Icelake servers and Cometlake support in no-HWP mode to
     intel_pstate (Giovanni Gherdovich).

   - Make cpufreq_online() error path be consistent with the CPU device
     removal path in cpufreq (Rafael Wysocki).

   - Clean up 3 cpufreq drivers and the statistics code (Hailong Liu,
     Randy Dunlap, Shaokun Zhang).

   - Make intel_idle use special idle state parameters for C6 when
     package C-states are disabled (Chen Yu).

   - Rework the TEO (timer events oriented) cpuidle governor to address
     some theoretical shortcomings in it (Rafael Wysocki).

   - Drop unneeded semicolon from the TEO governor (Wan Jiabing).

   - Modify the runtime PM framework to accept unassigned suspend and
     resume callback pointers (Ulf Hansson).

   - Improve pm_runtime_get_sync() documentation (Krzysztof Kozlowski).

   - Improve device performance states support in the generic power
     domains (genpd) framework (Ulf Hansson).

   - Fix some documentation issues in genpd (Yang Yingliang).

   - Make the operating performance points (OPP) framework use the
     required-opps DT property in use cases that are not related to
     genpd (Hsin-Yi Wang).

   - Make lazy_link_required_opp_table() use list_del_init instead of
     list_del/INIT_LIST_HEAD (Yang Yingliang).

   - Simplify wake IRQs handling in the core system-wide sleep support
     code and clean up some coding style inconsistencies in it (Tian
     Tao, Zhen Lei).

   - Add cooling support to the tegra30 devfreq driver and improve its
     DT bindings (Dmitry Osipenko).

   - Fix some assorted issues in the devfreq core and drivers (Chanwoo
     Choi, Dong Aisheng, YueHaibing)"

* tag 'pm-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
  PM / devfreq: passive: Fix get_target_freq when not using required-opp
  cpufreq: Make cpufreq_online() call driver->offline() on errors
  opp: Allow required-opps to be used for non genpd use cases
  cpuidle: teo: remove unneeded semicolon in teo_select()
  dt-bindings: devfreq: tegra30-actmon: Add cooling-cells
  dt-bindings: devfreq: tegra30-actmon: Convert to schema
  PM / devfreq: userspace: Use DEVICE_ATTR_RW macro
  PM: runtime: Clarify documentation when callbacks are unassigned
  PM: runtime: Allow unassigned ->runtime_suspend|resume callbacks
  PM: runtime: Improve path in rpm_idle() when no callback
  PM: hibernate: remove leading spaces before tabs
  PM: sleep: remove trailing spaces and tabs
  PM: domains: Drop/restore performance state votes for devices at runtime PM
  PM: domains: Return early if perf state is already set for the device
  PM: domains: Split code in dev_pm_genpd_set_performance_state()
  cpuidle: teo: Use kerneldoc documentation in admin-guide
  cpuidle: teo: Rework most recent idle duration values treatment
  cpuidle: teo: Change the main idle state selection logic
  cpuidle: teo: Cosmetic modification of teo_select()
  cpuidle: teo: Cosmetic modifications of teo_update()
  ...

Pull x86 entry code related updates from Thomas Gleixner:

 - Consolidate the macros for .byte ... opcode sequences

 - Deduplicate register offset defines in include files

 - Simplify the ia32,x32 compat handling of the related syscall tables
   to get rid of #ifdeffery.

 - Clear all EFLAGS which are not required for syscall handling

 - Consolidate the syscall tables and switch the generation over to the
   generic shell script and remove the CFLAGS tweaks which are not
   longer required.

 - Use 'int' type for system call numbers to match the generic code.

 - Add more selftests for syscalls

* tag 'x86-entry-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/syscalls: Don't adjust CFLAGS for syscall tables
  x86/syscalls: Remove -Wno-override-init for syscall tables
  x86/uml/syscalls: Remove array index from syscall initializers
  x86/syscalls: Clear 'offset' and 'prefix' in case they are set in env
  x86/entry: Use int everywhere for system call numbers
  x86/entry: Treat out of range and gap system calls the same
  x86/entry/64: Sign-extend system calls on entry to int
  selftests/x86/syscall: Add tests under ptrace to syscall_numbering_64
  selftests/x86/syscall: Simplify message reporting in syscall_numbering
  selftests/x86/syscall: Update and extend syscall_numbering_64
  x86/syscalls: Switch to generic syscallhdr.sh
  x86/syscalls: Use __NR_syscalls instead of __NR_syscall_max
  x86/unistd: Define X32_NR_syscalls only for 64-bit kernel
  x86/syscalls: Stop filling syscall arrays with *_sys_ni_syscall
  x86/syscalls: Switch to generic syscalltbl.sh
  x86/entry/x32: Rename __x32_compat_sys_* to __x64_compat_sys_*

Pull x86 interrupt related updates from Thomas Gleixner:

 - Consolidate the VECTOR defines and the usage sites.

 - Cleanup GDT/IDT related code and replace open coded ASM with proper
   native helper functions.

* tag 'x86-irq-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kexec: Set_[gi]dt() -> native_[gi]dt_invalidate() in machine_kexec_*.c
  x86: Add native_[ig]dt_invalidate()
  x86/idt: Remove address argument from idt_invalidate()
  x86/irq: Add and use NR_EXTERNAL_VECTORS and NR_SYSTEM_VECTORS
  x86/irq: Remove unused vectors defines

Pull timer updates from Thomas Gleixner:
 "Time and clocksource/clockevent related updates:

  Core changes:

   - Infrastructure to support per CPU "broadcast" devices for per CPU
     clockevent devices which stop in deep idle states. This allows us
     to utilize the more efficient architected timer on certain ARM SoCs
     for normal operation instead of permanentely using the slow to
     access SoC specific clockevent device.

   - Print the name of the broadcast/wakeup device in /proc/timer_list

   - Make the clocksource watchdog more robust against delays between
     reading the current active clocksource and the watchdog
     clocksource. Such delays can be caused by NMIs, SMIs and vCPU
     preemption.

     Handle this by reading the watchdog clocksource twice, i.e. before
     and after reading the current active clocksource. In case that the
     two watchdog reads shows an excessive time delta, the read sequence
     is repeated up to 3 times.

   - Improve the debug output and add a test module for the watchdog
     mechanism.

   - Reimplementation of the venerable time64_to_tm() function with a
     faster and significantly smaller version. Straight from the source,
     i.e. the author of the related research paper contributed this!

  Driver changes:

   - No new drivers, not even new device tree bindings!

   - Fixes, improvements and cleanups and all over the place"

* tag 'timers-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  time/kunit: Add missing MODULE_LICENSE()
  time: Improve performance of time64_to_tm()
  clockevents: Use list_move() instead of list_del()/list_add()
  clocksource: Print deviation in nanoseconds when a clocksource becomes unstable
  clocksource: Provide kernel module to test clocksource watchdog
  clocksource: Reduce clocksource-skew threshold
  clocksource: Limit number of CPUs checked for clock synchronization
  clocksource: Check per-CPU clock synchronization when marked unstable
  clocksource: Retry clock read if long delays detected
  clockevents: Add missing parameter documentation
  clocksource/drivers/timer-ti-dm: Drop unnecessary restore
  clocksource/arm_arch_timer: Improve Allwinner A64 timer workaround
  clocksource/drivers/arm_global_timer: Remove duplicated argument in arm_global_timer
  clocksource/drivers/arm_global_timer: Make symbol 'gt_clk_rate_change_nb' static
  arm: zynq: don't disable CONFIG_ARM_GLOBAL_TIMER due to CONFIG_CPU_FREQ anymore
  clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes
  clocksource/drivers/ingenic: Rename unreasonable array names
  clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFG
  clocksource/drivers/mediatek: Ack and disable interrupts on suspend
  clocksource/drivers/samsung_pwm: Constify source IO memory
  ...

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt subsystem:

  Core changes:

   - Cleanup and simplification of common code to invoke the low level
     interrupt flow handlers when this invocation requires irqdomain
     resolution. Add the necessary core infrastructure.

   - Provide a proper interface for modular PMU drivers to set the
     interrupt affinity.

   - Add a request flag which allows to exclude interrupts from spurious
     interrupt detection. Useful especially for IPI handlers which
     always return IRQ_HANDLED which turns the spurious interrupt
     detection into a pointless waste of CPU cycles.

  Driver changes:

   - Bulk convert interrupt chip drivers to the new irqdomain low level
     flow handler invocation mechanism.

   - Add device tree bindings for the Renesas R-Car M3-W+ SoC

   - Enable modular build of the Qualcomm PDC driver

   - The usual small fixes and improvements"

* tag 'irq-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  dt-bindings: interrupt-controller: arm,gic-v3: Describe GICv3 optional properties
  irqchip: gic-pm: Remove redundant error log of clock bulk
  irqchip/sun4i: Remove unnecessary oom message
  irqchip/irq-imx-gpcv2: Remove unnecessary oom message
  irqchip/imgpdc: Remove unnecessary oom message
  irqchip/gic-v3-its: Remove unnecessary oom message
  irqchip/gic-v2m: Remove unnecessary oom message
  irqchip/exynos-combiner: Remove unnecessary oom message
  irqchip: Bulk conversion to generic_handle_domain_irq()
  genirq: Move non-irqdomain handle_domain_irq() handling into ARM's handle_IRQ()
  genirq: Add generic_handle_domain_irq() helper
  irqchip/nvic: Convert from handle_IRQ() to handle_domain_irq()
  irqdesc: Fix __handle_domain_irq() comment
  genirq: Use irq_resolve_mapping() to implement __handle_domain_irq() and co
  irqdomain: Introduce irq_resolve_mapping()
  irqdomain: Protect the linear revmap with RCU
  irqdomain: Cache irq_data instead of a virq number in the revmap
  irqdomain: Use struct_size() helper when allocating irqdomain
  irqdomain: Make normal and nomap irqdomains exclusive
  powerpc: Move the use of irq_domain_add_nomap() behind a config option
  ...

Pull CPU hotplug fix from Thomas Gleixner:
 "A fix for the CPU hotplug and cpusets interaction:

  cpusets delegate the hotplug work to a workqueue to prevent a lock
  order inversion vs. the CPU hotplug lock. The work is not flushed
  before the hotplug operation returns which creates user visible
  inconsistent state. Prevent this by flushing the work after dropping
  CPU hotplug lock and before releasing the outer mutex which serializes
  the CPU hotplug related sysfs interface operations"

* tag 'smp-urgent-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Cure the cpusets trainwreck

Pull CPU hotplug cleanup from Thomas Gleixner:
 "A simple cleanup for the CPU hotplug code to avoid per_cpu_ptr()
  reevaluation"

* tag 'smp-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Simplify access to percpu cpuhp_state

Pull printk updates from Petr Mladek:

 - Add %pt[RT]s modifier to vsprintf(). It overrides ISO 8601 separator
   by using ' ' (space). It produces "YYYY-mm-dd HH:MM:SS" instead of
   "YYYY-mm-ddTHH:MM:SS".

 - Correctly parse long row of numbers by sscanf() when using the field
   width. Add extensive sscanf() selftest.

 - Generalize re-entrant CPU lock that has already been used to
   serialize dump_stack() output. It is part of the ongoing printk
   rework. It will allow to remove the obsoleted printk_safe buffers and
   introduce atomic consoles.

 - Some code clean up and sparse warning fixes.

* tag 'printk-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: fix cpu lock ordering
  lib/dump_stack: move cpu lock to printk.c
  printk: Remove trailing semicolon in macros
  random32: Fix implicit truncation warning in prandom_seed_state()
  lib: test_scanf: Remove pointless use of type_min() with unsigned types
  selftests: lib: Add wrapper script for test_scanf
  lib: test_scanf: Add tests for sscanf number conversion
  lib: vsprintf: Fix handling of number field widths in vsscanf
  lib: vsprintf: scanf: Negative number must have field width > 1
  usb: host: xhci-tegra: Switch to use %ptTs
  nilfs2: Switch to use %ptTs
  kdb: Switch to use %ptTs
  lib/vsprintf: Allow to override ISO 8601 date and time separator

Merge tag 'hyperv-next-signed-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:
 "Just a few minor enhancement patches and bug fixes"

* tag 'hyperv-next-signed-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv()
  Drivers: hv: Move Hyper-V extended capability check to arch neutral code
  drivers: hv: Fix missing error code in vmbus_connect()
  x86/hyperv: fix logical processor creation
  hv_utils: Fix passing zero to 'PTR_ERR' warning
  scsi: storvsc: Use blk_mq_unique_tag() to generate requestIDs
  Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer
  hv_balloon: Remove redundant assignment to region_start

* pm-domains:
  PM: domains: Drop/restore performance state votes for devices at runtime PM
  PM: domains: Return early if perf state is already set for the device
  PM: domains: Split code in dev_pm_genpd_set_performance_state()
  PM: domains: fix some kernel-doc issues

* pm-devfreq:
  PM / devfreq: passive: Fix get_target_freq when not using required-opp
  dt-bindings: devfreq: tegra30-actmon: Add cooling-cells
  dt-bindings: devfreq: tegra30-actmon: Convert to schema
  PM / devfreq: userspace: Use DEVICE_ATTR_RW macro
  PM / devfreq: imx8m-ddrc: Remove DEVFREQ_GOV_SIMPLE_ONDEMAND dependency
  PM / devfreq: tegra30: Support thermal cooling
  PM / devfreq: imx-bus: Remove imx_bus_get_dev_status
  PM / devfreq: Add missing error code in devfreq_add_device()

* pm-cpufreq:
  cpufreq: Make cpufreq_online() call driver->offline() on errors
  cpufreq: loongson2: Remove unused linux/sched.h headers
  cpufreq: sh: Remove unused linux/sched.h headers
  cpufreq: stats: Clean up local variable in cpufreq_stats_create_table()
  cpufreq: intel_pstate: hybrid: Fix build with CONFIG_ACPI unset
  cpufreq: sc520_freq: add 'fallthrough' to one case
  cpufreq: intel_pstate: Add Cometlake support in no-HWP mode
  cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode
  cpufreq: intel_pstate: hybrid: CPU-specific scaling factor
  cpufreq: intel_pstate: hybrid: Avoid exposing two global attributes

* pm-cpuidle:
  cpuidle: teo: remove unneeded semicolon in teo_select()
  cpuidle: teo: Use kerneldoc documentation in admin-guide
  cpuidle: teo: Rework most recent idle duration values treatment
  cpuidle: teo: Change the main idle state selection logic
  cpuidle: teo: Cosmetic modification of teo_select()
  cpuidle: teo: Cosmetic modifications of teo_update()
  intel_idle: Adjust the SKX C6 parameters if PC6 is disabled

* pm-core:
  PM: runtime: Clarify documentation when callbacks are unassigned
  PM: runtime: Allow unassigned ->runtime_suspend|resume callbacks
  PM: runtime: Improve path in rpm_idle() when no callback
  PM: runtime: document common mistake with pm_runtime_get_sync()

* pm-sleep:
  PM: hibernate: remove leading spaces before tabs
  PM: sleep: remove trailing spaces and tabs
  PM: hibernate: fix spelling mistakes
  PM: wakeirq: Set IRQF_NO_AUTOEN when requesting the IRQ

* pm-opp:
  opp: Allow required-opps to be used for non genpd use cases
  opp: use list_del_init instead of list_del/INIT_LIST_HEAD

Pull operating performance points (OPP) framework updates for v5.14
from Viresh Kumar:

"This pull request:

- allows partial use of required-opps for non-genpd users.

- does a minor cleanup and uses list_del_init()."

* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  opp: Allow required-opps to be used for non genpd use cases
  opp: use list_del_init instead of list_del/INIT_LIST_HEAD

Pull user namespace rlimit handling update from Eric Biederman:
 "This is the work mainly by Alexey Gladkov to limit rlimits to the
  rlimits of the user that created a user namespace, and to allow users
  to have stricter limits on the resources created within a user
  namespace."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  cred: add missing return error code when set_cred_ucounts() failed
  ucounts: Silence warning in dec_rlimit_ucounts
  ucounts: Set ucount_max to the largest positive value the type can hold
  kselftests: Add test to check for rlimit changes in different user namespaces
  Reimplement RLIMIT_MEMLOCK on top of ucounts
  Reimplement RLIMIT_SIGPENDING on top of ucounts
  Reimplement RLIMIT_MSGQUEUE on top of ucounts
  Reimplement RLIMIT_NPROC on top of ucounts
  Use atomic_t for ucounts reference counting
  Add a reference to ucounts for each cred
  Increase size of ucounts to atomic_long_t

Merge tag 'array-bounds-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull array-bounds fixes from Gustavo Silva:
 "Fix an out-of-bounds warning in the media subsystem.

  This is part of the ongoing efforts to globally enable -Warray-bounds"

* tag 'array-bounds-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  media: siano: Fix out-of-bounds warnings in smscore_load_firmware_family2()

Merge tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull fallthrough fixes from Gustavo Silva:
 "Fix many fall-through warnings when building with Clang 12.0.0 and
  '-Wimplicit-fallthrough' so that we at some point will be able to
  enable that warning by default"

* tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits)
  rxrpc: Fix fall-through warnings for Clang
  drm/nouveau/clk: Fix fall-through warnings for Clang
  drm/nouveau/therm: Fix fall-through warnings for Clang
  drm/nouveau: Fix fall-through warnings for Clang
  xfs: Fix fall-through warnings for Clang
  xfrm: Fix fall-through warnings for Clang
  tipc: Fix fall-through warnings for Clang
  sctp: Fix fall-through warnings for Clang
  rds: Fix fall-through warnings for Clang
  net/packet: Fix fall-through warnings for Clang
  net: netrom: Fix fall-through warnings for Clang
  ide: Fix fall-through warnings for Clang
  hwmon: (max6621) Fix fall-through warnings for Clang
  hwmon: (corsair-cpro) Fix fall-through warnings for Clang
  firewire: core: Fix fall-through warnings for Clang
  braille_console: Fix fall-through warnings for Clang
  ipv4: Fix fall-through warnings for Clang
  qlcnic: Fix fall-through warnings for Clang
  bnxt_en: Fix fall-through warnings for Clang
  netxen_nic: Fix fall-through warnings for Clang
  ...

Pull pstore updates from Kees Cook:
 "Use normal block device I/O path for pstore/blk. (Christoph Hellwig,
  Kees Cook, Pu Lehui)"

* tag 'pstore-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/blk: Include zone in pstore_device_info
  pstore/blk: Fix kerndoc and redundancy on blkdev param
  pstore/blk: Use the normal block device I/O path
  pstore/blk: Move verify_size() macro out of function
  pstore/blk: Improve failure reporting

Pull seccomp updates from Kees Cook:

 - Add "atomic addfd + send reply" mode to SECCOMP_USER_NOTIF to better
   handle EINTR races visible to seccomp monitors. (Rodrigo Campos,
   Sargun Dhillon)

 - Improve seccomp selftests for readability in CI systems. (Kees Cook)

* tag 'seccomp-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests/seccomp: Avoid using "sysctl" for report
  selftests/seccomp: Flush benchmark output
  selftests/seccomp: More closely track fds being assigned
  selftests/seccomp: Add test for atomic addfd+send
  seccomp: Support atomic "addfd + send reply"

Pull documentation updates from Jonathan Corbet:
 "This was a reasonably active cycle for documentation; this includes:

   - Some kernel-doc cleanups. That script is still regex onslaught from
     hell, but it has gotten a little better.

   - Improvements to the checkpatch docs, which are also used by the
     tool itself.

   - A major update to the pathname lookup documentation.

   - Elimination of :doc: markup, since our automarkup magic can create
     references from filenames without all the extra noise.

   - The flurry of Chinese translation activity continues.

  Plus, of course, the usual collection of updates, typo fixes, and
  warning fixes"

* tag 'docs-5.14' of git://git.lwn.net/linux: (115 commits)
  docs: path-lookup: use bare function() rather than literals
  docs: path-lookup: update symlink description
  docs: path-lookup: update get_link() ->follow_link description
  docs: path-lookup: update WALK_GET, WALK_PUT desc
  docs: path-lookup: no get_link()
  docs: path-lookup: update i_op->put_link and cookie description
  docs: path-lookup: i_op->follow_link replaced with i_op->get_link
  docs: path-lookup: Add macro name to symlink limit description
  docs: path-lookup: remove filename_mountpoint
  docs: path-lookup: update do_last() part
  docs: path-lookup: update path_mountpoint() part
  docs: path-lookup: update path_to_nameidata() part
  docs: path-lookup: update follow_managed() part
  docs: Makefile: Use CONFIG_SHELL not SHELL
  docs: Take a little noise out of the build process
  docs: x86: avoid using ReST :doc:`foo` markup
  docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup
  docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
  docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup
  docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo` markup
  ...

Pull btrfs updates from David Sterba:
 "A normal mix of improvements, core changes and features that user have
  been missing or complaining about.

  User visible changes:

   - new sysfs exports:
      - add sysfs knob to limit scrub IO bandwidth per device
      - device stats are also available in
           /sys/fs/btrfs/FSID/devinfo/DEVID/error_stats

   - support cancellable resize and device delete ioctls

   - change how the empty value is interpreted when setting a property,
     so far we have only 'btrfs.compression' and we need to distinguish
     a reset to defaults and setting "do not compress", in general the
     empty value will always mean 'reset to defaults' for any other
     property, for compression it's either 'no' or 'none' to forbid
     compression

  Performance improvements:

   - no need for full sync when truncation does not touch extents,
     reported run time change is -12%

   - avoid unnecessary logging of xattrs during fast fsyncs (+17%
     throughput, -17% runtime on xattr stress workload)

  Core:

   - preemptive flushing improvements and fixes
      - adjust clamping logic on multi-threaded workloads to avoid
        flushing too soon
      - take into account global block reserve, may help on almost full
        filesystems
      - continue flushing when there are enough pending delalloc and
        ordered bytes

   - simplify logic around conditional transaction commit, a workaround
     used in the past for throttling that's been superseded by ticket
     reservations that manage the throttling in a better way

   - subpage blocksize preparation:
      - submit read time repair only for each corrupted sector
      - scrub repair now works with sectors and not pages
      - free space cache (v1) works with sectors and not pages
      - more fine grained bio tracking for extents
      - subpage support in page callbacks, extent callbacks, end io
        callbacks

   - simplify transaction abort logic and always abort and don't check
     various potentially unreliable stats tracked by the transaction

   - exclusive operations can do more checks when started and allow eg.
     cancellation of the same running operation

   - ensure relocation never runs while we have send operations running,
     e.g. when zoned background auto reclaim starts

  Fixes:

   - zoned: more sanity checks of write pointer

   - improve error handling in delayed inodes

   - send:
      - fix invalid path for unlink operations after parent
        orphanization
      - fix crash when memory allocations trigger reclaim

   - skip compression of we have only one page (can't make things
     better)

   - empty value of a property newly means reset to default

  Other:

   - lots of cleanups, comment updates, yearly typo fixing

   - disable build on platforms having page size 256K"

* tag 'for-5.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (101 commits)
  btrfs: remove unused btrfs_fs_info::total_pinned
  btrfs: rip out btrfs_space_info::total_bytes_pinned
  btrfs: rip the first_ticket_bytes logic from fail_all_tickets
  btrfs: remove FLUSH_DELAYED_REFS from data ENOSPC flushing
  btrfs: rip out may_commit_transaction
  btrfs: send: fix crash when memory allocations trigger reclaim
  btrfs: ensure relocation never runs while we have send operations running
  btrfs: shorten integrity checker extent data mount option
  btrfs: switch mount option bits to enums and use wider type
  btrfs: props: change how empty value is interpreted
  btrfs: compression: don't try to compress if we don't have enough pages
  btrfs: fix unbalanced unlock in qgroup_account_snapshot()
  btrfs: sysfs: export dev stats in devinfo directory
  btrfs: fix typos in comments
  btrfs: remove a stale comment for btrfs_decompress_bio()
  btrfs: send: use list_move_tail instead of list_del/list_add_tail
  btrfs: disable build on platforms having page size 256K
  btrfs: send: fix invalid path for unlink operations after parent orphanization
  btrfs: inline wait_current_trans_commit_start in its caller
  btrfs: sink wait_for_unblock parameter to async commit
  ...

Pull erofs updates from Gao Xiang:
 "No noticable change available for this cycle. Just a bugfix related to
  sb chksum feature, two minor cleanups and Chao's email address update:

   - fix wrong error code overwritten due to sb checksum feature

   - two minor cleanups

   - update Chao's email address"

* tag 'erofs-for-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  MAINTAINERS: erofs: update my email address
  erofs: clean up file headers & footers
  erofs: remove the occupied parameter from z_erofs_pagevec_enqueue()
  erofs: fix error return code in erofs_read_superblock()

Pull fscrypt updates from Eric Biggers:
 "A couple bug fixes for fs/crypto/:

   - Fix handling of major dirhash values that happen to be 0.

   - Fix cases where keys were derived differently on big endian systems
     than on little endian systems (affecting some newer features only)"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: fix derivation of SipHash keys on big endian CPUs
  fscrypt: don't ignore minor_hash when hash is 0

Pull integrity subsystem updates from Mimi Zohar:
 "The large majority of the changes are EVM portable & immutable
  signature related: removing a dependency on loading an HMAC key,
  safely allowing file metadata included in the EVM portable & immutable
  signatures to be modified, allowing EVM signatures to fulfill IMA file
  signature policy requirements, including the EVM file metadata
  signature in lieu of an IMA file data signature in the measurement
  list, and adding dynamic debugging of EVM file metadata.

  In addition, in order to detect critical data or file change
  reversions, duplicate measurement records are permitted in the IMA
  measurement list.

  The remaining patches address compiler, sparse, and doc warnings"

* tag 'integrity-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: (31 commits)
  evm: Check xattr size discrepancy between kernel and user
  evm: output EVM digest calculation info
  IMA: support for duplicate measurement records
  ima: Fix warning: no previous prototype for function 'ima_add_kexec_buffer'
  ima: differentiate between EVM failures in the audit log
  ima: Fix fall-through warning for Clang
  ima: Pass NULL instead of 0 to ima_get_action() in ima_file_mprotect()
  ima: Include header defining ima_post_key_create_or_update()
  ima/evm: Fix type mismatch
  ima: Set correct casting types
  doc: Fix warning in Documentation/security/IMA-templates.rst
  evm: Don't return an error in evm_write_xattrs() if audit is not enabled
  ima: Define new template evm-sig
  ima: Define new template fields xattrnames, xattrlengths and xattrvalues
  evm: Verify portable signatures against all protected xattrs
  ima: Define new template field imode
  ima: Define new template fields iuid and igid
  ima: Add ima_show_template_uint() template library function
  ima: Don't remove security.ima if file must not be appraised
  ima: Introduce template field evmsig and write to field sig as fallback
  ...

Pull tomoyo fix from Tetsuo Handa:
 "A doc warning fix from ChenXiaoSong"

* tag 'tomoyo-pr-20210628' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
  tomoyo: fix doc warnings