- 10 Jan, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "First RDMA subsystem updates for 5.5-rc. A very small set of fixes, most people seem to still be recovering from December! Five small driver fixes: - Fix error flow with MR allocation in bnxt_re - An errata work around for bnxt_re - Misuse of the workqueue API in hfi1 - Protocol error in hfi1 - Regression in 5.5 related to the mmap rework with i40iw" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: i40iw: Remove setting of VMA private data and use rdma_user_mmap_io IB/hfi1: Adjust flow PSN with the correct resync_psn IB/hfi1: Don't cancel unused work item RDMA/bnxt_re: Fix Send Work Entry state check while polling completions RDMA/bnxt_re: Avoid freeing MR resources if dereg fails
-
- 09 Jan, 2020 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Here is a host of GPIO fixes for the v5.5 series. The ACPI fix is especially important, see summary below and in the commit for details: - Select GPIOLIB_IRQCHIP on the max77620 GPIO expander - Fix context restore in the Zynq driver - Create a new ACPI quirk handler for disabling wakeups on problematic hardware. - Fix a coding style issue on the mockup device" * tag 'gpio-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism gpiolib: acpi: Turn dmi_system_id table into a generic quirk table gpio: zynq: Fix for bug in zynq_gpio_restore_context API gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIP gpio: mockup: fix coding style
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: "Two fixes for pin control, not much to say about it, it's just regular driver fixes: - Fix erroneous shift in the Meson driver - Make Lochnagar select the GPIOLIB Kconfig symbol" * tag 'pinctrl-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: meson: Fix wrong shift value when get drive-strength pinctrl: lochnagar: select GPIOLIB
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "Just a few small fixups here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: imx_sc_key - only take the valid data from SCU firmware as key state Input: add safety guards to input_set_keycode() Input: input_event - fix struct padding on sparc64 Input: uinput - always report EPOLLOUT
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - fix for OOB in hiddev, from Dmitry Torokhov - _poll API fixes for hidraw, from Marcel Holtmann - functional fix for Steam driver, from Rodrigo Rivas Costa - a few new device IDs / device-specific quirks and other assorted smaller fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: steam: Fix input device disappearing HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID drivers/hid/hid-multitouch.c: fix a possible null pointer access. HID: wacom: Recognize new MobileStudio Pro PID HID: intel-ish-hid: ipc: add CMP device id HID: hiddev: fix mess in hiddev_open() HID: hid-input: clear unmapped usages HID: Add quirk for incorrect input length on Lenovo Y720 HID: asus: Ignore Asus vendor-page usage-code 0xff events HID: ite: Add USB id match for Acer SW5-012 keyboard dock HID: Add quirk for Xin-Mo Dual Controller HID: Fix slab-out-of-bounds read in hid_field_extract HID: multitouch: Add LG MELF0410 I2C touchscreen support HID: uhid: Fix returning EPOLLOUT from uhid_char_poll HID: hidraw: Fix returning EPOLLOUT from hidraw_poll
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Missing netns pointer init in arp_tables, from Florian Westphal. 2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang. 3) Fix divide by zero in sch_cake, from Wen Yang. 4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl Huang. 5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long. 6) cgroup bpf programs can be released out of order, fix from Roman Gushchin. 7) Make sure stmmac debugfs entry name is changed when device name changes, from Jiping Ma. 8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric Dumazet. 9) SKB leak in lan78xx usb driver, also from Eric Dumazet. 10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq packet scheduler, reject them. From Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) tipc: fix wrong connect() return code tipc: fix link overflow issue at socket shutdown netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present netfilter: conntrack: dccp, sctp: handle null timeout argument atm: eni: fix uninitialized variable warning macvlan: do not assume mac_header is set in macvlan_broadcast() net: sch_prio: When ungrafting, replace with FIFO mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos gtp: fix bad unlock balance in gtp_encap_enable_socket pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM tipc: remove meaningless assignment in Makefile tipc: do not add socket.o to tipc-y twice net: stmmac: dwmac-sun8i: Allow all RGMII modes net: stmmac: dwmac-sunxi: Allow all RGMII modes net: usb: lan78xx: fix possible skb leak net: stmmac: Fixed link does not need MDIO Bus vlan: vlan_changelink() should propagate errors vlan: fix memory leak in vlan_dev_set_egress_priority stmmac: debugfs entry name is not be changed when udev rename device name. ...
-
Rodrigo Rivas Costa authored
The `connected` value for wired devices was not properly initialized, it must be set to `true` upon creation, because wired devices do not generate connection events. When a raw client (the Steam Client) uses the device, the input device is destroyed. Then, when the raw client finishes, it must be recreated. But since the `connected` variable was false this never happended. Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 08 Jan, 2020 19 commits
-
-
Tuong Lien authored
The current 'tipc_wait_for_connect()' function does a wait-loop for the condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket connecting has done. However, when the condition is met, it returns '0' even in the case the connecting is actually failed, the socket state is set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..). This results in a wrong return code for the 'connect()' call from user, making it believe that the connection is established and go ahead with building, sending a message, etc. but finally failed e.g. '-EPIPE'. This commit fixes the issue by changing the wait condition to the 'tipc_sk_connected(sk)', so the function will return '0' only when the connection is really established. Otherwise, either the socket 'sk_err' if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tuong Lien authored
When a socket is suddenly shutdown or released, it will reject all the unreceived messages in its receive queue. This applies to a connected socket too, whereas there is only one 'FIN' message required to be sent back to its peer in this case. In case there are many messages in the queue and/or some connections with such messages are shutdown at the same time, the link layer will easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level because of the message rejections. As a result, the link will be taken down. Moreover, immediately when the link is re-established, the socket layer can continue to reject the messages and the same issue happens... The commit refactors the '__tipc_shutdown()' function to only send one 'FIN' in the situation mentioned above. For the connectionless case, it is unavoidable but usually there is no rejections for such socket messages because they are 'dest-droppable' by default. In addition, the new code makes the other socket states clear (e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Missing netns context in arp_tables, from Florian Westphal. 2) Underflow in flowtable reference counter, from wenxu. 3) Fix incorrect ethernet destination address in flowtable offload, from wenxu. 4) Check for status of neighbour entry, from wenxu. 5) Fix NAT port mangling, from wenxu. 6) Unbind callbacks from destroy path to cleanup hardware properly on flowtable removal. 7) Fix missing casting statistics timestamp, add nf_flowtable_time_stamp and use it. 8) NULL pointer exception when timeout argument is null in conntrack dccp and sctp protocol helpers, from Florian Westphal. 9) Possible nul-dereference in ipset with IPSET_ATTR_LINENO, also from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
The set uadt functions assume lineno is never NULL, but it is in case of ip_set_utest(). syzkaller managed to generate a netlink message that calls this with LINENO attr present: general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104 Call Trace: ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563 pass a dummy lineno storage, its easier than patching all set implementations. This seems to be a day-0 bug. Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Reported-by: syzbot+34bd2369d38707f3f4a7@syzkaller.appspotmail.com Fixes: a7b4f989 ("netfilter: ipset: IP set core support") Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
The timeout pointer can be NULL which means we should modify the per-nets timeout instead. All do this, except sctp and dccp which instead give: general protection fault: 0000 [#1] PREEMPT SMP KASAN net/netfilter/nf_conntrack_proto_dccp.c:682 ctnl_timeout_parse_policy+0x150/0x1d0 net/netfilter/nfnetlink_cttimeout.c:67 cttimeout_default_set+0x150/0x1c0 net/netfilter/nfnetlink_cttimeout.c:368 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 Reported-by: syzbot+46a4ad33f345d1dd346e@syzkaller.appspotmail.com Fixes: c779e849 ("netfilter: conntrack: remove get_timeout() indirection") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Arnd Bergmann authored
With -O3, gcc has found an actual unintialized variable stored into an mmio register in two instances: drivers/atm/eni.c: In function 'discard': drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized] writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4); ^ drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized] Change the code to always write zeroes instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Use of eth_hdr() in tx path is error prone. Many drivers call skb_reset_mac_header() before using it, but others do not. Commit 6d1ccff6 ("net: reset mac header in dev_start_xmit()") attempted to fix this generically, but commit d346a3fa ("packet: introduce PACKET_QDISC_BYPASS socket option") brought back the macvlan bug. Lets add a new helper, so that tx paths no longer have to call skb_reset_mac_header() only to get a pointer to skb->data. Hopefully we will be able to revert 6d1ccff6 ("net: reset mac header in dev_start_xmit()") and save few cycles in transmit fast path. BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline] BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579 CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] mc_hash drivers/net/macvlan.c:251 [inline] macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline] macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559 __netdev_start_xmit include/linux/netdevice.h:4447 [inline] netdev_start_xmit include/linux/netdevice.h:4461 [inline] dev_direct_xmit+0x419/0x630 net/core/dev.c:4079 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240 packet_snd net/packet/af_packet.c:2966 [inline] packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 __sys_sendto+0x262/0x380 net/socket.c:1985 __do_sys_sendto net/socket.c:1997 [inline] __se_sys_sendto net/socket.c:1993 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x442639 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639 RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x163/0x770 mm/slab.c:3665 kmalloc include/linux/slab.h:561 [inline] tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a4932000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1025 bytes inside of 4096-byte region [ffff8880a4932000, ffff8880a4933000) The buggy address belongs to the page: page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000 raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: b863ceb7 ("[NET]: Add macvlan driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Petr Machata says: ==================== When ungrafting from PRIO, replace child with FIFO When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting that band gets dropped. That is incorrect--no Qdisc was explicitly added when PRIO was created, and after removal, none should have to be added either. In patch #2, this problem is fixed for PRIO by first attempting to create a default Qdisc and only falling back to noop when that fails. This pattern of attempting to create an invisible FIFO, using NOOP only as a fallback, is also seen in some other Qdiscs. The only driver currently offloading PRIO (and thus presumably the only one impacted by this) is mlxsw. Therefore patch #1 extends mlxsw to handle the replacement by an invisible FIFO gracefully. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting that band gets dropped. That is incorrect--no Qdisc was explicitly added when PRIO was created, and after removal, none should have to be added either. Fix PRIO by first attempting to create a default Qdisc and only falling back to noop when that fails. This pattern of attempting to create an invisible FIFO, using NOOP only as a fallback, is also seen in other Qdiscs. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
The following patch will change PRIO to replace a removed Qdisc with an invisible FIFO, instead of NOOP. mlxsw will see this replacement due to the graft message that is generated. But because FIFO does not issue its own REPLACE message, when the graft operation takes place, the Qdisc that mlxsw tracks under the indicated band is still the old one. The child handle (0:0) therefore does not match, and mlxsw rejects the graft operation, which leads to an extack message: Warning: Offloading graft operation failed. Fix by ignoring the invisible children in the PRIO graft handler. The DESTROY message of the removed Qdisc is going to follow shortly and handle the removal. Fixes: 32dc5efc ("mlxsw: spectrum: qdiscs: prio: Handle graft command") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Niklas Cassel authored
As I am no longer with Linaro, I no longer have access to documentation for this IP. The Linaro email will start bouncing soon. Vinod is fully capable to maintain this driver by himself, therefore remove myself as co-maintainer for qcom-ethqos. Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
WARNING: bad unlock balance detected! 5.5.0-rc5-syzkaller #0 Not tainted ------------------------------------- syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at: [<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 but there are no more locks to release! other info that might help us debug this: 2 locks held by syz-executor921/9688: #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline] #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline] #1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951 stack backtrace: CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline] print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984 __lock_release kernel/locking/lockdep.c:4242 [inline] lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503 sock_release_ownership include/net/sock.h:1496 [inline] release_sock+0x17c/0x1c0 net/core/sock.c:2961 gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830 gtp_encap_enable drivers/net/gtp.c:852 [inline] gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666 __rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 ____sys_sendmsg+0x753/0x880 net/socket.c:2330 ___sys_sendmsg+0x100/0x170 net/socket.c:2384 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg net/socket.c:2424 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x445d49 Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f8019074db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dac38 RCX: 0000000000445d49 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 00000000006dac30 R08: 0000000000000004 R09: 0000000000000000 R10: 0000000000000008 R11: 0000000000000246 R12: 00000000006dac3c R13: 00007ffea687f6bf R14: 00007f80190759c0 R15: 20c49ba5e353f7cf Fixes: e198987e ("gtp: fix suspicious RCU usage") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
As diagnosed by Florian : If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue() can loop forever in : if (f->credit <= 0) { f->credit += q->quantum; goto begin; } ... because f->credit is either 0 or -2147483648. Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 : This max value should limit risks of breaking user setups while fixing this bug. Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler") Signed-off-by: Eric Dumazet <edumazet@google.com> Diagnosed-by: Florian Westphal <fw@strlen.de> Reported-by: syzbot+dc9071cc5a85950bdfce@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masahiro Yamada authored
There is no module named tipc_diag. The assignment to tipc_diag-y has no effect. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masahiro Yamada authored
net/tipc/Makefile adds socket.o twice. tipc-y += addr.o bcast.o bearer.o \ core.o link.o discover.o msg.o \ name_distr.o subscr.o monitor.o name_table.o net.o \ netlink.o netlink_compat.o node.o socket.o eth_media.o \ ^^^^^^^^ topsrv.o socket.o group.o trace.o ^^^^^^^^ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chen-Yu Tsai authored
Allow all the RGMII modes to be used. This would allow us to represent the hardware better in the device tree with RGMII_ID where in most cases the PHY's internal delay for both RX and TX are used. Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chen-Yu Tsai authored
Allow all the RGMII modes to be used. This would allow us to represent the hardware better in the device tree with RGMII_ID where in most cases the PHY's internal delay for both RX and TX are used. Fixes: af0bd4e9 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds authored
Pull more tpmd fixes from Jarkko Sakkinen: "One critical regression fix (the faulty commit got merged in rc3, but also marked for stable)" * tag 'tpmdd-next-20200108' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: Handle negative priv->response_len in tpm_common_read()
-
Tadeusz Struk authored
The priv->response_length can hold the size of an response or an negative error code, and the tpm_common_read() needs to handle both cases correctly. Changed the type of response_length to signed and accounted for negative value in tpm_common_read(). Cc: stable@vger.kernel.org Fixes: d23d1248 ("tpm: fix invalid locking in NONBLOCKING mode") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
-
- 07 Jan, 2020 14 commits
-
-
Eric Dumazet authored
If skb_linearize() fails, we need to free the skb. TSO makes skb bigger, and this bug might be the reason Raspberry Pi 3B+ users had to disable TSO. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
When using fixed link we don't need the MDIO bus support. Reported-by: Heiko Stuebner <heiko@sntech.de> Reported-by: kernelci.org bot <bot@kernelci.org> Fixes: d3e014ec ("net: stmmac: platform: Fix MDIO init for platforms without PHY") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Acked-by: Sriram Dash <Sriram.dash@samsung.com> Tested-by: Patrice Chotard <patrice.chotard@st.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail> # Lamobo R1 (fixed-link + MDIO sub node for roboswitch). Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== vlan: rtnetlink newlink fixes First patch fixes a potential memory leak found by syzbot Second patch makes vlan_changelink() aware of errors and report them to user. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Both vlan_dev_change_flags() and vlan_dev_set_egress_priority() can return an error. vlan_changelink() should not ignore them. Fixes: 07b5b17e ("[VLAN]: Use rtnl_link API") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
There are few cases where the ndo_uninit() handler might be not called if an error happens while device is initialized. Since vlan_newlink() calls vlan_changelink() before trying to register the netdevice, we need to make sure vlan_dev_uninit() has been called at least once, or we might leak allocated memory. BUG: memory leak unreferenced object 0xffff888122a206c0 (size 32): comm "syz-executor511", pid 7124, jiffies 4294950399 (age 32.240s) hex dump (first 32 bytes): 00 00 00 00 00 00 61 73 00 00 00 00 00 00 00 00 ......as........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000000eb3bb85>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000000eb3bb85>] slab_post_alloc_hook mm/slab.h:586 [inline] [<000000000eb3bb85>] slab_alloc mm/slab.c:3320 [inline] [<000000000eb3bb85>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549 [<000000007b99f620>] kmalloc include/linux/slab.h:556 [inline] [<000000007b99f620>] vlan_dev_set_egress_priority+0xcc/0x150 net/8021q/vlan_dev.c:194 [<000000007b0cb745>] vlan_changelink+0xd6/0x140 net/8021q/vlan_netlink.c:126 [<0000000065aba83a>] vlan_newlink+0x135/0x200 net/8021q/vlan_netlink.c:181 [<00000000fb5dd7a2>] __rtnl_newlink+0x89a/0xb80 net/core/rtnetlink.c:3305 [<00000000ae4273a1>] rtnl_newlink+0x4e/0x80 net/core/rtnetlink.c:3363 [<00000000decab39f>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424 [<00000000accba4ee>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<00000000319fe20f>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 [<00000000d51938dc>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000d51938dc>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328 [<00000000e539ac79>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917 [<000000006250c27e>] sock_sendmsg_nosec net/socket.c:639 [inline] [<000000006250c27e>] sock_sendmsg+0x54/0x70 net/socket.c:659 [<00000000e2a156d1>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330 [<000000008c87466e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384 [<00000000110e3054>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417 [<00000000d71077c8>] __do_sys_sendmsg net/socket.c:2426 [inline] [<00000000d71077c8>] __se_sys_sendmsg net/socket.c:2424 [inline] [<00000000d71077c8>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424 Fixe: 07b5b17e ("[VLAN]: Use rtnl_link API") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2020-01-07 The following pull-request contains BPF updates for your *net* tree. We've added 2 non-merge commits during the last 1 day(s) which contain a total of 2 files changed, 16 insertions(+), 4 deletions(-). The main changes are: 1) Fix a use-after-free in cgroup BPF due to auto-detachment, from Roman Gushchin. 2) Fix skb out-of-bounds access in ld_abs/ind instruction, from Daniel Borkmann. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiping Ma authored
Add one notifier for udev changes net device name. Fixes: b6601323ef9e ("net: stmmac: debugfs entry name is not be changed when udev rename") Signed-off-by: Jiping Ma <jiping.ma2@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shiraz Saleem authored
vm_ops is now initialized in ib_uverbs_mmap() with the recent rdma mmap API changes. Earlier it was done in rdma_umap_priv_init() which would not be called unless a driver called rdma_user_mmap_io() in its mmap. i40iw does not use the rdma_user_mmap_io API but sets the vma's vm_private_data to a driver object. This now conflicts with the vm_op rdma_umap_close as priv pointer points to the i40iw driver object instead of the private data setup by core when rdma_user_mmap_io is called. This leads to a crash in rdma_umap_close with a mmap put being called when it should not have. Remove the redundant setting of the vma private_data in i40iw as it is not used. Also move i40iw over to use the rdma_user_mmap_io API. This gives the extra protection of having the mappings zapped when the context is detsroyed. BUG: unable to handle page fault for address: 0000000100000001 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 6 PID: 9528 Comm: rping Kdump: loaded Not tainted 5.5.0-rc4+ #117 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014 RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core] RSP: 0018:ffffb340c04c7c38 EFLAGS: 00010202 RAX: 00000000ffffffff RBX: ffff9308e7be2a00 RCX: 000000000000cec0 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000100000001 RBP: ffff9308dc7641f0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff8d4414d8 R12: ffff93075182c780 R13: 0000000000000001 R14: ffff93075182d2a8 R15: ffff9308e2ddc840 FS: 0000000000000000(0000) GS:ffff9308fdc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000100000001 CR3: 00000002e0412004 CR4: 00000000001606e0 Call Trace: rdma_umap_close+0x40/0x90 [ib_uverbs] remove_vma+0x43/0x80 exit_mmap+0xfd/0x1b0 mmput+0x6e/0x130 do_exit+0x290/0xcc0 ? get_signal+0x152/0xc40 do_group_exit+0x46/0xc0 get_signal+0x1bd/0xc40 ? prepare_to_wait_event+0x97/0x190 do_signal+0x36/0x630 ? remove_wait_queue+0x60/0x60 ? __audit_syscall_exit+0x1d9/0x290 ? rcu_read_lock_sched_held+0x52/0x90 ? kfree+0x21c/0x2e0 exit_to_usermode_loop+0x4f/0xc3 do_syscall_64+0x1ed/0x270 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fae715a81fd Code: Bad RIP value. RSP: 002b:00007fae6e163cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: fffffffffffffe00 RBX: 00007fae6e163d30 RCX: 00007fae715a81fd RDX: 0000000000000010 RSI: 00007fae6e163cf0 RDI: 0000000000000003 RBP: 00000000013413a0 R08: 00007fae68000000 R09: 0000000000000017 R10: 0000000000000001 R11: 0000000000000293 R12: 00007fae680008c0 R13: 00007fae6e163cf0 R14: 00007fae717c9804 R15: 00007fae6e163ed0 CR2: 0000000100000001 ---[ end trace b33d58d3a06782cb ]--- RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core] Fixes: b86deba9 ("RDMA/core: Move core content from ib_uverbs to ib_core") Link: https://lore.kernel.org/r/20200107162223.1745-1-shiraz.saleem@intel.comSigned-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Hans de Goede authored
On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI event handling causes spurious wakeups. This commit adds a new honor_wakeup option, defaulting to true (our current behavior), which can be used to disable wakeup on troublesome hardware to avoid these spurious wakeups. This is a workaround for an architectural problem with s2idle under Linux where we do not have any mechanism to immediately go back to sleep after wakeup events, other then for embedded-controller events using the standard ACPI EC interface, for details see: https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/ One series of laptops which is not able to suspend without this workaround is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk which makes sets honor_wakeup to false on these models. Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200105160357.97154-3-hdegoede@redhat.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Hans de Goede authored
Turn the existing run_edge_events_on_boot_blacklist dmi_system_id table into a generic quirk table, storing the quirks in the driver_data ptr. This is a preparation patch for adding other types of (DMI based) quirks. Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200105160357.97154-2-hdegoede@redhat.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Swapna Manupati authored
This patch writes the inverse value of Interrupt Mask Status register into the Interrupt Enable register in zynq_gpio_restore_context API to fix the bug. Fixes: e11de4de ("gpio: zynq: Add support for suspend resume") Signed-off-by: Swapna Manupati <swapna.manupati@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Link: https://lore.kernel.org/r/1577362338-28744-2-git-send-email-srinivas.neeli@xilinx.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Qianggui Song authored
In meson_pinconf_get_drive_strength, variable bit is calculated by meson_calc_reg_and_bit, this value is the offset from the first pin of a certain bank to current pin, while Meson SoCs use two bits for each pin to depict drive-strength. So a left shift by 1 should be done or node pinconf-pins shows wrong message. Fixes: 6ea3e3bb ("pinctrl: meson: add support of drive-strength-microamp") Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Link: https://lore.kernel.org/r/20191226023734.9631-1-qianggui.song@amlogic.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Arnd Bergmann authored
In a rare randconfig build I came across one configuration that does not enable CONFIG_GPIOLIB, which is needed by lochnagar: ERROR: "devm_gpiochip_add_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_generic_free" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_generic_request" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_get_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! Add another 'select' like all other pinctrl drivers have. Fixes: 0548448b ("pinctrl: lochnagar: Add support for the Cirrus Logic Lochnagar") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191218163701.171914-1-arnd@arndb.deAcked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-01-06 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v5.3 ('net/mlx5: Move devlink registration before interfaces load') For -stable v5.4 ('net/mlx5e: Fix hairpin RSS table size') ('net/mlx5: DR, Init lists that are used in rule's member') ('net/mlx5e: Always print health reporter message to dmesg') ('net/mlx5: DR, No need for atomic refcount for internal SW steering resources') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-