When we replace the existing synchronous RPC calls with asynchronous calls,
the reference count will be needed in order to allow us to examine the
result of the RPC call.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Also fix up nlmclnt_lock() so that it doesn't pass modified versions of
fl->fl_flags to nlmclnt_cancel() and other helpers.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

We want to ensure that req->rq_private_buf.len is updated before
req->rq_received, so that call_decode() doesn't use an old value for
req->rq_rcv_buf.len.

In 'call_decode()' itself, instead of using task->tk_status (which is set
using req->rq_received) must use the actual value of
req->rq_private_buf.len when deciding whether or not the received RPC reply
is too short.

Finally ensure that we set req->rq_rcv_buf.len to zero when retrying a
request. A typo meant that we were resetting req->rq_private_buf.len in
call_decode(), and then clobbering that value with the old rq_rcv_buf.len
again in xprt_transmit().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

It is quite possible that the OPEN, CLOSE, LOCK, LOCKU,... compounds fail
before the actual stateful operation has been executed (for instance in the
PUTFH call). There is no way to tell from the overall status result which
operations were executed from the COMPOUND.

The fix is to move incrementing of the sequence id into the XDR layer,
so that we do it as we process the results from the stateful operation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

There should be no need to invalidate a perfectly good state owner just
because of a stale filehandle. Doing so can cause the state recovery code
to break, since nfs4_get_renew_cred() and nfs4_get_setclientid_cred() rely
on finding active state owners.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

In the case of readpage() we need to ensure that the pages get unlocked,
and that the error is flagged.

In the case of O_DIRECT, we need to ensure that the pages are all released.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

It is possible for nfs_wb_page() to sometimes exit with 0 return value, yet
the page is left in a dirty state.
For instance in the case where the server rebooted, and the COMMIT request
failed, then all the previously "clean" pages which were cached by the
server, but were not guaranteed to have been writted out to disk,
have to be redirtied and resent to the server.
The fix is to have nfs_wb_page_priority() check that the page is clean
before it exits...

This fixes a condition that triggers the BUG_ON(PagePrivate(page)) in
nfs_create_request() when we're in the nfs_readpage() path.

Also eliminate a redundant BUG_ON(!PageLocked(page)) while we're at it. It
turns out that clear_page_dirty_for_io() has the exact same test.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

..and always destroy using a 'soft' RPC call. Destroying GSS credentials
isn't mandatory; the server can always cope with a few credentials not
getting destroyed in a timely fashion.

This actually fixes a hang situation. Basically, some servers will decide
that the client is crazy if it tries to destroy an RPC context for which
they have sent an RPCSEC_GSS_CREDPROBLEM, and so will refuse to talk to it
for a while.
The regression therefor probably was introduced by commit
0df7fb74.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The rest of the networking layer uses SOCK_ASYNC_NOSPACE to signal whether
or not we have someone waiting for buffer memory. Convert the SUNRPC layer
to use the same idiom.
Remove the unlikely()s in xs_udp_write_space and xs_tcp_write_space. In
fact, the most common case will be that there is nobody waiting for buffer
space.

SOCK_NOSPACE is there to tell the TCP layer whether or not the cwnd was
limited by the application window. Ensure that we follow the same idiom as
the rest of the networking layer here too.

Finally, ensure that we clear SOCK_ASYNC_NOSPACE once we wake up, so that
write_space() doesn't keep waking things up on xprt->pending.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

call_verify() can, under certain circumstances, free the RPC slot. In that
case, our cached pointer 'req = task->tk_rqstp' is invalid. Bug was
introduced in commit 220bcc2a (SUNRPC:
Don't call xprt_release in call refresh).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean up: refactor the encoding of the opaque 16-byte private argument in
xdr_encode_mon().  This will be updated later to support IPv6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Switch to using the new mon_id encoder function.

Now that we've refactored the encoding of SM_MON requests, we've
discovered that the pre-computed buffer length maximums are
incorrect!
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean up: document the argument type that xdr_encode_common() is
marshalling by introducing a new function.  The new function will replace
xdr_encode_common() in just a sec.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean up: introduce a new XDR encoder specifically for the my_id
argument of SM_MON requests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean up: introduce a new XDR encoder specifically for the mon_name
argument of SM_MON requests.  This will be updated later to support IPv6
addresses in addition to IPv4 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Introduce a special helper function to check the length of NSM strings
before they are placed on the wire.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean-up: replace  __inline__ and use up-to-date function declaration
conventions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean up: RPC protocol version numbers are u32.  Make sure we use an
appropriate type for NLM version numbers when calling nlm_lookup_host().

Eliminates a harmless mixed sign comparison in nlm_host_lookup().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Bruce Fields says:
"By the way, we've got another config-related nit here:

	http://bugzilla.linux-nfs.org/show_bug.cgi?id=156

You can build lockd without CONFIG_SYSCTL set, but then the module will
fail to load."

For now, disable the sysctl registration calls in lockd if CONFIG_SYSCTL
is not enabled.  This allows the kernel to build properly if PROC_FS or
SYSCTL is not enabled, but an NFS client is desired.

In the long run, we would like to be able to build the kernel with an
NFS client but without lockd.  This makes sense, for example, if you want
an NFSv4-only NFS client, as NFSv4 doesn't use NLM at all.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Most distros will want support for rpcbind protocols 3 and 4 to default off
until they have integrated user-space support for the new rpcbind daemon
which supports IPv6 RPC services.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean up: refresh the help text for Kconfig items related to the sunrpc
module.  Remove obsolete URLs, and make the language consistent among
the options.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Since O_DIRECT is a standard feature that is enabled in most distros,
eliminate the CONFIG_NFS_DIRECTIO build option, and change the
fs/nfs/Makefile to always build in the NFS direct I/O engine.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Display all mount options in /proc/mount which may be needed to reconstruct
a previous mount.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Save the value of the mountproto= mountport= mountvers= and mountaddr=
options so that these values can be displayed later via
nfs_show_options().

This preserves the intent of the original mount options, should the file
system need to be remounted based on what's displayed in /proc/mounts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

During a remount based on the mount options displayed in /proc/mounts, we
want to preserve the original behavior of the mount request.  Let's save
the original setting of the "port=" mount option in the mount's nfs_server
structure.

This allows us to simplify the default behavior of port setting for NFSv4
mounts: by default, NFSv2/3 mounts first try an RPC bind to determine the
NFS server's port, unless the user specified the "port=" mount option;
Users can force the client to skip the RPC bind by explicitly specifying
"port=<value>".

NFSv4, by contrast, assumes the NFS server port is 2049 and skips the RPC
bind, unless the user specifies "port=".  Users can force an RPC bind for
NFSv4 by explicitly specifying "port=0".

I added a couple of extra comments to clarify this behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean up: make data types of fields in nfs_parsed_mount_options more
consistent with other uses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean up: use %u instead of %d when displaying NFS mount options.

Nit: Fix reporting of "namlen=" option in nfs_show_mount_stats.  The mount
option is called "namlen" without the "e".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Currently, the NFS readdir decoders have a workaround for buggy servers
that send an empty readdir response with the EOF bit unset. If the
server sends a malformed response in some cases, this workaround kicks
in and just returns an empty response rather than returning a proper
error to the caller.

This patch does 3 things:

1) have malformed responses with no entries return error (-EIO)

2) preserve existing workaround for servers that send empty
   responses with the EOF marker unset.

3) Add some comments to clarify the logic in decode_readdir().
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Currently, the NFS readdir decoders have a workaround for buggy servers
that send an empty readdir response with the EOF bit unset. If the
server sends a malformed response in some cases, this workaround kicks
in and just returns an empty response rather than returning a proper
error to the caller.

This patch does 3 things:

1) have malformed responses with no entries return error (-EIO)

2) preserve existing workaround for servers that send empty
   responses with the EOF marker unset.

3) Add some comments to clarify the logic in nfs3_xdr_readdirres().
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Currently, the NFS readdir decoders have a workaround for buggy servers
that send an empty readdir response with the EOF bit unset. If the
server sends a malformed response in some cases, this workaround kicks
in and just returns an empty response rather than returning a proper
error to the caller.

This patch does 3 things:

1) have malformed responses with no entries return error (-EIO)

2) preserve existing workaround for servers that send empty
   responses with the EOF marker unset.

3) Add some comments to clarify the logic in nfs_xdr_readdirres().
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Both flush functions have the same error handling routine.  Pull
it out as a function.
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Ignoring the return value from nfs_pageio_add_request can cause deadlocks.

In read path:
  call nfs_pageio_add_request from readpage_async_filler
  assume at this point that there are requests already in desc, that
    can't be merged with the current request.
  so nfs_pageio_doio is fired up to clear out desc.
  assume something goes wrong in setting up the io, so desc->pg_error is set.
  This causes nfs_pageio_add_request to return 0, *WITHOUT* adding the original
    request.
  BUT, since return code is ignored, readpage_async_filler assumes it has
    been added, and does nothing further, leaving page locked.
  do_generic_mapping_read will eventually call lock_page, resulting in deadlock

In write path:
  page is marked dirty by generic_perform_write
  nfs_writepages is called
  call nfs_pageio_add_request from nfs_page_async_flush
  assume at this point that there are requests already in desc, that
    can't be merged with the current request.
  so nfs_pageio_doio is fired up to clear out desc.
  assume something goes wrong in setting up the io, so desc->pg_error is set.
  This causes nfs_page_async_flush to return 0, *WITHOUT* adding the original
    request, yet marking the request as locked (PG_BUSY) and in writeback,
    clearing dirty marks.
  The next time a write is done to the page, deadlock will result as
    nfs_write_end calls nfs_update_request
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  async_tx: avoid the async xor_zero_sum path when src_cnt > device->max_xor
  fsldma: Fix the DMA halt when using DMA_INTERRUPT async_tx transfer.

This reverts commit 2c81ce4c.

It caused several new troubles (eg suspend slowdown bisected down to
this patch by Pavel Machek), so just revert it for now.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel:
  sched: tune multi-core idle balancing
  sched: retune wake granularity
  sched: wakeup-buddy tasks are cache-hot
  sched: improve affine wakeups
  sched, net: socket wakeups are sync
  sched: clean up wakeup balancing, code flow
  sched: clean up wakeup balancing, rename variables
  sched: clean up wakeup balancing, move wake_affine()