- 31 May, 2015 31 commits
-
-
Arnd Bergmann authored
The thunderx ethernet driver fails to build on architectures that do not have an atomic readq() and writeq() function for 64-bit PCI bus access: drivers/net/ethernet/cavium/thunder/thunder_bgx.c: In function 'bgx_reg_read': include/asm-generic/io.h:195:23: error: implicit declaration of function 'readq' [-Werror=implicit-function-declaration] It seems impossible to get this driver to work on most 32-bit hardware, so it's better to add an explicit dependency, in order to let us keep building 'allmodconfig' kernels on all architectures. As the driver is meant for the internal hardware on an arm64 SoC, this is not a problem for usability. Allowing the build on all 64-bit architectures rather than just CONFIG_ARM64 on the other hand means that we get the benefit of build testing on x86. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Or Gerlitz says: ==================== mlx4 driver update, May 28, 2015 The 1st patch fixes an issue with a function running DPDK overriding broadcast steering rules set by other functions. Please add this one to your -stable queue. The rest of the series from Matan and Ido deals with scaling the number of IRQs that serve RoCE applications to be in par with the Ethernet driver. changes from V0: - addressed feedback from Sergei, removed extra blank line in patch #4 ==================== Signed-off-by: -
Matan Barak authored
When freeing a CQ, we need to make sure there are no asynchronous events (on the ASYNC EQ) that could relate to this CQ before freeing it. This is done by introducing synchronize_irq. Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Ido Shamay authored
Now that EQs management is in the sole responsibility of mlx4_core, the IRQ affinity hints configuration should be in its hands as well. request_irq is called only once by the first consumer (maybe mlx4_ib), so mlx4_en passes the affinity mask too late. We also need to request vectors according to the cores we want to run on. mlx4_core distribution of IRQs to cores is straight forward, EQ(i)->IRQ will set affinity hint to core i. Consumers need to request EQ vectors, according to their cores considerations (NUMA). Signed-off-by:
-
Matan Barak authored
Previously, mlx4_en allocated EQs and used them exclusively. This affected RoCE performance, as applications which are events sensitive were limited to use only the legacy EQs. Change that by introducing an EQ pool. This pool is managed by mlx4_core. EQs are assigned to ports (when there are limited number of EQs, multiple ports could be assigned to the same EQs). An exception to this rule is the ASYNC EQ which handles various events. Legacy EQs are completely removed as all EQs could be shared. When a consumer (mlx4_ib/mlx4_en) requests an EQ, it asks for EQ serving on a specific port. The core driver calculates which EQ should be assigned to that request. Because IRQs are shared between IB and Ethernet modules, their names only include the PCI device BDF address. Signed-off-by:
-
Matan Barak authored
In SRIOV, when simple (i.e - Ethernet L2 only) flow steering rules are created, always create them at MLX4_DOMAIN_NIC priority (instead of the real priority the function created them at). This is done in order to let multiple functions add broadcast/multicast rules without affecting other functions, which is necessary for DPDK in SRIOV. Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-05-28 Here's a set of patches intended for 4.2. The majority of the changes are on the 802.15.4 side of things rather than Bluetooth related: - All sorts of cleanups & fixes to ieee802154 and related drivers - Rework of tx power support in ieee802154 and its drivers - Support for setting ieee802154 tx power through nl802154 - New IDs for the btusb driver - Various cleanups & smaller fixes to btusb - New btrtl driver for Realtec devices - Fix suspend/resume for Realtek devices Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
David S. Miller authored
Amir Vadai says: ==================== net/mlx5: ConnectX-4 100G Ethernet driver This patchset extends the mlx5_core driver to support Ethernet functionality. The Ethernet functionality in the mlx5 driver is integrated into the core driver and not as separated driver. The IB functionality remains in the mlx5_ib driver as before. This functionality will enable the Ethernet capability of Mellanox's new famility of cards - ConnectX-4. Due to the fact that backword compatability is being kept, existing Connect-IB cards that are using this driver are fully working with the modified driver, and no issues with current deployments should be seen. Like the ConnectX-3 cards, ConnectX-4 is a VPI (Virtual Port Interface - every port can be configured as Infiniband or Ethernet) card. Unlike previous generations, the ConnectX-4 has a separate PCI function per port. The current code has a limitation that Infiniband and Ethernet port types are mutually exclusive. When the driver is compiled with Ethernet support, the Infiniband functionality is disabled and vice versa. To control that we added the CONFIG_MLX5_CORE_EN config directive which is 'n' by default, but can be changed by the user. This limitation is short-lived and would be addressed soon. As part of this patchset, mlx5_ifc.h was heavily modified [1]. This file is now generated automatically from the device specification document. Since this patch is too big for the mail server, it might be missing in the mailing list, but could be pulled from an external git repository [2]. irq name selection is done at driver initialization and doesn't contain the interface name as part of the irq name. irq_balancer will still work thanks to an improvement introduced by Neil Horman [3] to use sysfs instead of /proc/interrupts. Patchset was applied on top of commit ed2dfd90 ("tcp/dccp: warn user for preferred ip_local_port_range") [1] - Patch 4/11 ("net/mlx5_core: HW data structs/types definitions preparation for mlx5 ehternet driver") [2] - http://git.openfabrics.org/?p=~amirv/linux.git;a=shortlog;h=refs/heads/mlx5e_v1 [3] - kernel: da8d1c8b PCI/sysfs: add per pci device msi[x] irq listing (v5) irq_balancer: 32a7757 Complete rework of how we detect and classify irqs Thanks to Achiad, Saeed, Yevheny, Or and the whole team for making this happen, Amir Changes from V4: - Removed Patch 3/12: net/mlx5_core: Add EQ renaming mechanism - Patch 12/12: net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality - irq name is created on driver initialization, therefore it won't contain the network interface name in it. This won't effect irq_balancer thanks to patches introduced by Neil Horman to use sysfs instead of /proc/interrupts. Changes from V3: - PATCH 8/11: net/mlx5_core: Set/Query port MTU commands - Return value directly - no need for err. Changes from V2: - Improved changelogs and cover-letter - Added CONFIG_MLX5_EN to disable/enable the Ethernet functionality - Moved en.h and wq.[ch] into the patch with data-path related code Changes from V1: - Added patch 1/12 ("net/mlx5_core,mlx5_ib: Do not use vmap() on coherent memory") Changes from V0: - Removed V0 Patch 1/11 ("net/mlx5_core: Virtually extend work/completion queue buffers by one page") due to misuse of DMA API. Thanks Dave. - Patch 1/11 ("net/mlx5_core: Set irq affinity hints"): - Use kcalloc instead of kzalloc - Fix build error when CONFIG_CPUMASK_OFFSTACK=n. Driver loading will fail now if cpumask allocation is failing. - Using dev_to_node helper. Thanks, Ido. - Patch 3/11 ("net/mlx5_core: HW data structs/types definitions preparation for mlx5 ehternet driver") - Removed Mellanox internal comment at the head of the file. Thanks Joe - Patch 6/11 ("net/mlx5_core: Implement get/set port status") - Use direct return of function's result. Thanks Sergei. - Added Patch 8/11 ("net/mlx5_core: Set/Query port MTU commands") - Patch 9/11 ("net/mlx5: Ethernet Datapath files") - Use rq->wqe_sz instead of skb_end_offset. Thanks Ido. - Use dma_wmb() when possible instead of wmb(). Thanks Alex. - Fix checkpatch issues - Patch 10/11 ("net/mlx5: ethernet resources handling") - checkpatch issues - Added missing include - Patch 11/11 ("net/mlx5: Ethernet driver") - checkpatch issues - fixed typo - Modified use of affinity hint - Using dev_to_node helper. Thanks, Ido. - Use new hardware commands from Patch 8/11 ("net/mlx5_core: Set/Query port MTU commands") to get/set port MTU in hardware. - Removed NETIF_F_SG since hardware ring wraparound is not supported - Use dma_wmb() when possible instead of wmb(). Thanks Alex. ==================== Signed-off-by:
-
Amir Vadai authored
This is the Ethernet part of the driver for the Mellanox ConnectX(R)-4 Single/Dual-Port Adapter supporting 100Gb/s with VPI. The driver extends the existing mlx5 driver with Ethernet functionality. This patch contains the driver entry points but does not include transmit and receive (see the previous patch in the series) routines. It also adds the option MLX5_CORE_EN to Kconfig to enable/disable the Ethernet functionality. Currently, Kconfig is programmed to make Ethernet and Infiniband functionality mutally exclusive. Also changed MLX5_INFINIBAND to be depandant on MLX5_CORE instead of selecting it, since MLX5_CORE could be selected without MLX5_INFINIBAND being selected. Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Amir Vadai authored
This patch contains the resource handling files: - flow_table.c: This file contains the code to handle the low level API to configure hardware flow table. It is separated from the flow_table_en.c, because it will be used in the future by Raw Ethernet QP in mlx5_ib too. - en_flow_table.[ch]: Ethernet flow steering handling. The flow table object contain a mapping between flow specs and TIRs. This mechanism will be used also to configure e-switch in the future, when SR-IOV support will be added. - transobj.[ch] - Low level functions to create/modify/destroy the transport objects: RQ/SQ/TIR/TIS - vport.[ch] - Handle attributes of a virtual port (vPort) in the embedded switch. Currently this switch is a passthrough, until SR-IOV support will be added. Signed-off-by: -
Amir Vadai authored
en_[rt]x.c contains the data path related code specific to tx or rx. en_txrx.c contains data path code which is common for both the rx and tx, this is mainly napi related code. Below are the objects that are being used by the hardware and the driver in the data path: Channel - one channel per IRQ. Every channel object contains: RQ - describes the rx queue TIR - One TIR (Transport Interface Receive) object per flow type. TIR contains attributes for a type of rx flow (e.g IPv4, IPv6 etc). A flow is defined in the Flow Table. Currently TIR describes the RSS hash parameters if exists and LRO attributes. SQ - describes the a tx queue. There is one SQ (Send Queue) per TC (traffic class). TIS - There is one TIS (Transport Interface Send) per TC. It describes the TC and may later be extended to describe more transport properties. Both RQ and SQ inherit from the object WQ (work queue). This common code to describe the layout of CQE's WQE's in memory is in the files wq.[cj] For every channel there is one NAPI context that is used for RX and for TX. Driver is using netdev_alloc_skb() to allocate skb's. Signed-off-by: -
Saeed Mahameed authored
Introduce set/Query low level functions to access MTU in hardware. To be used by the netdev. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Rana Shahout authored
Introduce mlx5_core_modify_cq_moderation() to be used by the netdev, to set hardware coalescing. Signed-off-by:
Rana Shahout <ranas@mellanox.com> Signed-off-by:
-
Rana Shahout authored
Implemet get/set port status low level functions to be exposed by the netdev. Signed-off-by:
-
Saeed Mahameed authored
Those registers will be used by the ethtool to set/get settings. Signed-off-by:
-
Saeed Mahameed authored
- Query all supported types of dev caps on driver load. - Store the Cap data outbox per cap type into driver private data. - Introduce new Macros to access/dump stored caps (using the auto generated data types). - Obsolete SW representation of dev caps (no need for SW copy for each cap). - Modify IB driver to use new macros for checking caps. Signed-off-by:
-
Saeed Mahameed authored
mlx5_ifc.h was heavily modified here since it is now generated by a script from the device specification (PRM rev 0.25). This specification is backward compatible to existing hardware. Some structures/fields were added here in order to enable the Ethernet functionality of the driver. Signed-off-by:
-
Saeed Mahameed authored
Preparation for upcoming ethernet driver. - Move msix array from eq_table struct to priv since its not related to eq_table - Intorduce irq_info struct to hold all irq information - Move name from mlx5_eq to irq_info struct since it is irq property. - Set IRQ affinity hints Signed-off-by:
Achiad Shochat <achiad@mellanox.com> Signed-off-by:
-
Amir Vadai authored
As David Daney pointed in mlx4_core driver [1], mlx5_core is also misusing the DMA-API. This patch is removing the code that vmap() memory allocated by dma_alloc_coherent(). After this patch, users of this drivers might fail allocating resources on memory fragmeneted systems. This will be fixed later on. [1] - https://patchwork.ozlabs.org/patch/458531/ CC: David Daney <david.daney@cavium.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-05-28 This series contains updates to ethtool, ixgbe, i40e and i40evf. John adds helper routines for ethtool to pass VF to rx_flow_spec. Since the ring_cookie is 64 bits wide which is much larger than what could be used for actual queue index values, provide helper routines to pack a VF index into the cookie. Then John provides a ixgbe patch to allow flow director to use the entire queue space. Neerav provides a i40e patch to collect XOFF Rx stats, where it was not being collected before. Anjali provides ATR support for tunneled packets, as well as stats to count tunnel ATR hits. Cleaned up PF struct members which are unnecessary, since we can use the stat index macro directly. Cleaned up flow director ATR/SB messages to a higher debug level since they are not useful unless silicon validation is happening. Greg provides a patch to disable offline diagnostics if VFs are enabled since ethtool offline diagnostic tests are not designed (out of scope) to disable VF functions for testing and re-enable afterward. Also cleans up TODO comment that is no longer needed. Vasu provides a fix an FCoE EOF case where i40e_fcoe_ctxt_eof() maybe called before i40e_fcoe_eof_is_supported() is called. Jesse adds skb->xmit_more support for i40evf. Then provides a performance enhancement for i40evf by inlining some functions which provides a 15% gain in small packet performance. Also cleans up the use of time_stamp since it is no longer used to determine if there is a tx_hang and was a part of a previous tx_hang design which is no longer used. ==================== Signed-off-by: -
Ying Xue authored
As sock refcnt is taken when sock timer is started in sk_reset_timer(), the sock refcnt should be put when sock timer to be deleted is in pending state no matter what "probing_state" value of tipc sock is. Reviewed-by:
Erik Hugne <erik.hugne@ericsson.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Vivien Didelot authored
Fixes "vlaue" for "value" in include/linux/if_vlan.h. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Alexei Starovoitov authored
classic BPF already exposes skb->dev->ifindex via SKF_AD_IFINDEX extension. Allow eBPF program to access it as well. Note that classic aborts execution of the program if 'skb->dev == NULL' (which is inconvenient for program writers), whereas eBPF returns zero in such case. Also expose the 'skb_iif' field, since programs triggered by redirected packet need to known the original interface index. Summary: __skb->ifindex -> skb->dev->ifindex __skb->ingress_ifindex -> skb->skb_iif Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
KY Srinivasan authored
The current algorithm for deciding on the number of VRSS channels is not optimal since we open up the min of number of CPUs online and the number of VRSS channels the host is offering. So on a 32 VCPU guest we could potentially open 32 VRSS subchannels. Experimentation has shown that it is best to limit the number of VRSS channels to the number of CPUs within a NUMA node. Here is the new algorithm for deciding on the number of sub-channels we would open up: 1) Pick the minimum of what the host is offering and what the driver in the guest is specifying as the default value. 2) Pick the minimum of (1) and the numbers of CPUs in the NUMA node the primary channel is bound to. Signed-off-by:K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Sorin Dumitru authored
This is similar to b1cb59cf(net: sysctl_net_core: check SNDBUF and RCVBUF for min length). I don't think too small values can cause crashes in the case of udp and tcp, but I've seen this set to too small values which triggered awful performance. It also makes the setting consistent across all the wmem/rmem sysctls. Signed-off-by:
Sorin Dumitru <sdumitru@ixiacom.com> Signed-off-by:
-
David S. Miller authored
Mathieu Olivari says: ==================== Add support for QCA IPQ806x Ethernet GMAC controller This patch set adds support for the integrated Ethernet GMAC controller on QCA IPQ806x SoC. This controller is based on a Gigabit Synopsys DesignWare IP, already supported in the stmmac driver located in drivers/net/ethernet/stmicro/stmmac. This change is done as a follow-up to the following thread: *http://www.spinics.net/lists/netdev/msg311265.html While previous attempt was creating a new driver to drive this controller, this new post leverages the existing stmmac driver by implementing the SoC specific glue to it. Aside from the pure stmmac glue layer, we have a couple of related patches: *IPQ806x NSS clock addition is cherry-picked and refreshed from the following thread: https://lkml.org/lkml/2014/8/6/390 *phy-handle and fixed-link support are also added in this change set so the driver can be fully functional on platforms using device-trees as well as ethernet switches. V2: *Fix MODULE_LICENSE to "Dual BSD/GPL" as the dwmac-ipq806x.c is using ISC license. ==================== Signed-off-by:
-
Mathieu Olivari authored
Add the device tree bindings documentation for the QCA IPQ806x variant of the Synopsys DesignWare MAC. Signed-off-by:
Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by:
-
Mathieu Olivari authored
The ethernet controller available in IPQ806x is a Synopsys DesignWare Gigabit MAC IP core, already supported by the stmmac driver. This glue layer implements some platform specific settings required to get the controller working on an IPQ806x based platform. Signed-off-by:
-
Mathieu Olivari authored
In case DT is used, this change adds the ability to the stmmac driver to detect a fixed-link PHY, instanciate it, and use it during phy_connect(). Fixed link PHYs DT usage is described in: Documentation/devicetree/bindings/net/fixed-link.txt Signed-off-by:
-
Mathieu Olivari authored
On stmmac driver, PHY specification in device-tree was done using the non-standard property "snps,phy-addr". Specifying a PHY on a different MDIO bus that the one within the stmmac controller doesn't seem to be possible when device-tree is used. This change adds support for the phy-handle property, as specified in Documentation/devicetree/bindings/net/ethernet.txt. Signed-off-by:
-
Stephen Boyd authored
Add the NSS/GMAC clocks and the TCM clock and NSS resets. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
- 29 May, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2015-05-28 1) Remove xfrm_queue_purge as this is the same as skb_queue_purge. 2) Optimize policy and state walk. 3) Use a sane return code if afinfo registration fails. 4) Only check fori a acquire state if the state is not valid. 5) Remove a unnecessary NULL check before xfrm_pol_hold as it checks the input for NULL. 6) Return directly if the xfrm hold queue is empty, avoid to take a lock as it is nothing to do in this case. 7) Optimize the inexact policy search and allow for matching of policies with priority ~0U. All from Li RongQing. Please pull or let me know if there are problems. ==================== Signed-off-by: -
Vladimir Zapolskiy authored
Replace confusing QL_STATUS_INVALID_PARAM == -1 == -EPERM with -EINVAL and QLC_STATUS_UNSUPPORTED_CMD == -2 == -ENOENT with -EOPNOTSUPP, the latter error code is arguable, but it is already used in the driver, so let it be here as well. Also remove always false (!buf) check on read(), the driver should not care if userspace gets its EFAULT or not. Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Acked-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
-
- 28 May, 2015 7 commits
-
-
David S. Miller authored
All of these files were only building on non-x86 because of the indirect of inclusion of vmalloc.h by, of all things, "net/inet_hashtables.h" None of this got caught during build testing, because on x86 there is an implicit vmalloc.h include via on of the arch asm/ headers. This fixes all of these Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Catherine Sullivan authored
Bump. Change-ID: I54ec2787a9fead5e18447078f26e5dd27f01da44 Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Jim Young <james.m.young@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
The driver doesn't use the time_stamp member to determine if there is a tx_hang any more. There really isn't any point to the variable at all so just remove it. It was left over from a previous tx_hang design. Change-ID: I4c814827e1bcb46e45118fe37acdcfa814fb62a0 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Jesse Brandeburg authored
Inlining these functions gives us about 15% more 64 byte packets per second when using pktgen. 13.3 million to 15 million with a single queue. Also fix the function names in i40evf to i40evf not i40e while we are touching the function header. Change-ID: I3294ae9b085cf438672b6db5f9af122490ead9d0 Signed-off-by:
-
Jesse Brandeburg authored
Eric added support for skb->xmit_more in i40e, this ports that into i40evf as well. Support skb->xmit_more in i40evf is straightforward; we need to move around i40e_maybe_stop_tx() call to correctly test netif_xmit_stopped() before taking the decision to not kick the NIC. Change-ID: Idddda6a2e4a7ab335631c91ced51f55b25eb8468 Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Anjali Singhai Jain authored
These are not useful unless SV is happening as there is a FD flush counter that tracks this. Change-ID: If2655b5a29687247d03a51d35f69854bbeb711ce Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Vasu Dev authored
Because i40e_fcoe_ctxt_eof should never be called without i40e_fcoe_eof_is_supported being called first, the EOF in fcoe_ctxt_eof should always be valid and therefore we do not need to print an error if it is not valid. However, a WARN ON to easily catch any calls to i40e_fcoe_ctxt_eof that aren't preceded with a call to i40e_fcoe_eof_is_supported is helpful. Change-ID: I3b536b1981ec0bce80576a74440b7dea3908bdb9 Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Tested-by:
-
