- 22 Mar, 2017 40 commits
-
-
Peter Zijlstra authored
commit 44fee88c upstream. Subhransu reported that convert_art_to_tsc() isn't working for him. The ART to TSC relation is only set up for systems which use the refined TSC calibration. Systems with known TSC frequency (available via CPUID 15) are not using the refined calibration and therefor the ART to TSC relation is never established. Add the setup to the known frequency init path which skips ART calibration. The init code needs to be duplicated as for systems which use refined calibration the ART setup must be delayed until calibration has been done. The problem has been there since the ART support was introdduced, but only detected now because Subhransu tested the first time on hardware which has TSC frequency enumerated via CPUID 15. Note for stable: The conditional has changed from TSC_RELIABLE to TSC_KNOWN_FREQUENCY. [ tglx: Rewrote changelog and identified the proper 'Fixes' commit ] Fixes: f9677e0f ("x86/tsc: Always Running Timer (ART) correlated clocksource") Reported-by:
"Prusty, Subhransu S" <subhransu.s.prusty@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Cc: christopher.s.hall@intel.com Cc: kevin.b.stanton@intel.com Cc: john.stultz@linaro.org Cc: akataria@vmware.com Link: http://lkml.kernel.org/r/20170313145712.GI3312@twins.programming.kicks-ass.netSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shanker Donthineni authored
commit 90922a2d upstream. On Qualcomm Datacenter Technologies QDF2400 SoCs, the ITS hardware implementation uses 16Bytes for Interrupt Translation Entry (ITE), but reports an incorrect value of 8Bytes in GITS_TYPER.ITTE_size. It might cause kernel memory corruption depending on the number of MSI(x) that are configured and the amount of memory that has been allocated for ITEs in its_create_device(). This patch fixes the potential memory corruption by setting the correct ITE size to 16Bytes. Cc: stable@vger.kernel.org Signed-off-by:
Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 68925176 upstream. When invalidating guest TLBs, special care must be taken to actually shoot the guest TLBs and not the host ones if we're running on a VHE system. This is controlled by the HCR_EL2.TGE bit, which we forget to clear before invalidating TLBs. Address the issue by introducing two wrappers (__tlb_switch_to_guest and __tlb_switch_to_host) that take care of both the VTTBR_EL2 and HCR_EL2.TGE switching. Reported-by:
Tomasz Nowicki <tnowicki@caviumnetworks.com> Tested-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
-
Boris Brezillon authored
commit ab8df60e upstream. PV_CONTROL_CLK_SELECT_VEC is actually 2 and not 0. Fix the definition and rework the vc4_set_crtc_possible_masks() to cover the full range of the PV_CONTROL_CLK_SELECT field. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Eric Anholt <eric@anholt.net> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Derek Foreman authored
commit 26fc78f6 upstream. There was a small window where a userspace program could submit a pageflip after receiving a pageflip completion event yet still receive EBUSY. Signed-off-by:
Derek Foreman <derekf@osg.samsung.com> Signed-off-by:
Daniel Stone <daniels@collabora.com> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Boris Brezillon authored
commit f2a46926 upstream. There is no fixed divider on pllh_aux. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit a05ef161 ] Currently the build breaks if CMA=n and SPAPR_TCE_IOMMU=y: arch/powerpc/mm/mmu_context_iommu.c: In function ‘mm_iommu_get’: arch/powerpc/mm/mmu_context_iommu.c:193:42: error: ‘MIGRATE_CMA’ undeclared (first use in this function) if (get_pageblock_migratetype(page) == MIGRATE_CMA) { ^~~~~~~~~~~ Fix it by using the existing is_migrate_cma_page(), which evaulates to false when CMA=n. Fixes: 2e5bbb54 ("KVM: PPC: Book3S HV: Migrate pinned pages out of CMA") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit 32856eea ] Commit bbe097f0 ("usb: gadget: udc: atmel: fix endpoint name") introduced a memory leak when unbinding the driver. The endpoint names would not be freed. Solve that by including the name as a string in struct usba_ep so it is freed when the endpoint is. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Gabriel Krisman Bertazi authored
[ Upstream commit f209fa03 ] During a PCI error recovery, like the ones provoked by EEH in the ppc64 platform, all IO to the device must be blocked while the recovery is completed. Current 8250_pci implementation only suspends the port instead of detaching it, which doesn't prevent incoming accesses like TIOCMGET and TIOCMSET calls from reaching the device. Those end up racing with the EEH recovery, crashing it. Similar races were also observed when opening the device and when shutting it down during recovery. This patch implements a more robust IO blockage for the 8250_pci recovery by unregistering the port at the beginning of the procedure and re-adding it afterwards. Since the port is detached from the uart layer, we can be sure that no request will make through to the device during recovery. This is similar to the solution used by the JSM serial driver. I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on this one over one year ago. Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by:
-
Michael Pobega authored
[ Upstream commit 708f5dcc ] The Dell Latitude 3350's ethernet card attempts to use a reserved IRQ (18), resulting in ACPI being unable to enable the ethernet. Adding it to acpi_rev_dmi_table[] helps to work around this problem. Signed-off-by:
Michael Pobega <mpobega@neverware.com> [ rjw: Changelog ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Alex Hung authored
[ Upstream commit 9523b9bf ] Precision 5520 and 3520 either hang at login and during suspend or reboot. It turns out that that adding them to acpi_rev_dmi_table[] helps to work around those issues. Signed-off-by:
Alex Hung <alex.hung@canonical.com> [ rjw: Changelog ] Signed-off-by:
-
Vladimir Davydov authored
[ Upstream commit 89e364db ] synchronize_sched() is a heavy operation and calling it per each cache owned by a memory cgroup being destroyed may take quite some time. What is worse, it's currently called under the slab_mutex, stalling all works doing cache creation/destruction. Actually, there isn't much point in calling synchronize_sched() for each cache - it's enough to call it just once - after setting cpu_partial for all caches and before shrinking them. This way, we can also move it out of the slab_mutex, which we have to hold for iterating over the slab cache list. Link: https://bugzilla.kernel.org/show_bug.cgi?id=172991 Link: http://lkml.kernel.org/r/0a10d71ecae3db00fb4421bcd3f82bcc911f4be4.1475329751.git.vdavydov.dev@gmail.comSigned-off-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Reported-by:
Doug Smythies <dsmythies@telus.net> Acked-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Henrik Ingo authored
[ Upstream commit e950267a ] Some devices have invalid baSourceID references, causing uvc_scan_chain() to fail, but if we just take the entities we can find and put them together in the most sensible chain we can think of, turns out they do work anyway. Note: This heuristic assumes there is a single chain. At the time of writing, devices known to have such a broken chain are - Acer Integrated Camera (5986:055a) - Realtek rtl157a7 (0bda:57a7) Signed-off-by:
Henrik Ingo <henrik.ingo@avoinelama.fi> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Harald Freudenberger authored
[ Upstream commit b3e8652b ] Signed-off-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Mauricio Faria de Oliveira authored
[ Upstream commit 25cdb645 ] The WRITE_SAME commands are not present in the blk_default_cmd_filter write_ok list, and thus are failed with -EPERM when the SG_IO ioctl() is executed without CAP_SYS_RAWIO capability (e.g., unprivileged users). [ sg_io() -> blk_fill_sghdr_rq() > blk_verify_command() -> -EPERM ] The problem can be reproduced with the sg_write_same command # sg_write_same --num 1 --xferlen 512 /dev/sda # # capsh --drop=cap_sys_rawio -- -c \ 'sg_write_same --num 1 --xferlen 512 /dev/sda' Write same: pass through os error: Operation not permitted # For comparison, the WRITE_VERIFY command does not observe this problem, since it is in that list: # capsh --drop=cap_sys_rawio -- -c \ 'sg_write_verify --num 1 --ilen 512 --lba 0 /dev/sda' # So, this patch adds the WRITE_SAME commands to the list, in order for the SG_IO ioctl to finish successfully: # capsh --drop=cap_sys_rawio -- -c \ 'sg_write_same --num 1 --xferlen 512 /dev/sda' # That case happens to be exercised by QEMU KVM guests with 'scsi-block' devices (qemu "-device scsi-block" [1], libvirt "<disk type='block' device='lun'>" [2]), which employs the SG_IO ioctl() and runs as an unprivileged user (libvirt-qemu). In that scenario, when a filesystem (e.g., ext4) performs its zero-out calls, which are translated to write-same calls in the guest kernel, and then into SG_IO ioctls to the host kernel, SCSI I/O errors may be observed in the guest: [...] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [...] sd 0:0:0:0: [sda] tag#0 Sense Key : Aborted Command [current] [...] sd 0:0:0:0: [sda] tag#0 Add. Sense: I/O process terminated [...] sd 0:0:0:0: [sda] tag#0 CDB: Write Same(10) 41 00 01 04 e0 78 00 00 08 00 [...] blk_update_request: I/O error, dev sda, sector 17096824 Links: [1] http://git.qemu.org/?p=qemu.git;a=commit;h=336a6915bc7089fb20fea4ba99972ad9a97c5f52 [2] https://libvirt.org/formatdomain.html#elementsDisks (see 'disk' -> 'device') Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
Brahadambal Srinivasan <latha@linux.vnet.ibm.com> Reported-by:
Manjunatha H R <manjuhr1@in.ibm.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit 2a32b9b1 ] Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit 4391d7f5 ] GP102/GP104 make life difficult by redefining the channel indices for some registers, but not others. Signed-off-by:
-
Ben Skeggs authored
[ Upstream commit e50fcff1 ] Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit d9c72894 ] We are going to allow the userspace to configure container in one memory context and pass container fd to another so we are postponing memory allocations accounted against the locked memory limit. One of previous patches took care of it_userspace. At the moment we create the default DMA window when the first group is attached to a container; this is done for the userspace which is not DDW-aware but familiar with the SPAPR TCE IOMMU v2 in the part of memory pre-registration - such client expects the default DMA window to exist. This postpones the default DMA window allocation till one of the folliwing happens: 1. first map/unmap request arrives; 2. new window is requested; This adds noop for the case when the userspace requested removal of the default window which has not been created yet. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Acked-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit 6f01cc69 ] There is already a helper to create a DMA window which does allocate a table and programs it to the IOMMU group. However tce_iommu_take_ownership_ddw() did not use it and did these 2 calls itself to simplify error path. Since we are going to delay the default window creation till the default window is accessed/removed or new window is added, we need a helper to create a default window from all these cases. This adds tce_iommu_create_default_window(). Since it relies on a VFIO container to have at least one IOMMU group (for future use), this changes tce_iommu_attach_group() to add a group to the container first and then call the new helper. Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit 4b6fad70 ] At the moment the userspace tool is expected to request pinning of the entire guest RAM when VFIO IOMMU SPAPR v2 driver is present. When the userspace process finishes, all the pinned pages need to be put; this is done as a part of the userspace memory context (MM) destruction which happens on the very last mmdrop(). This approach has a problem that a MM of the userspace process may live longer than the userspace process itself as kernel threads use userspace process MMs which was runnning on a CPU where the kernel thread was scheduled to. If this happened, the MM remains referenced until this exact kernel thread wakes up again and releases the very last reference to the MM, on an idle system this can take even hours. This moves preregistered regions tracking from MM to VFIO; insteads of using mm_iommu_table_group_mem_t::used, tce_container::prereg_list is added so each container releases regions which it has pre-registered. This changes the userspace interface to return EBUSY if a memory region is already registered in a container. However it should not have any practical effect as the only userspace tool available now does register memory region once per container anyway. As tce_iommu_register_pages/tce_iommu_unregister_pages are called under container->lock, this does not need additional locking. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Acked-by:
-
Alexey Kardashevskiy authored
[ Upstream commit bc82d122 ] In some situations the userspace memory context may live longer than the userspace process itself so if we need to do proper memory context cleanup, we better have tce_container take a reference to mm_struct and use it later when the process is gone (@current or @current->mm is NULL). This references mm and stores the pointer in the container; this is done in a new helper - tce_iommu_mm_set() - when one of the following happens: - a container is enabled (IOMMU v1); - a first attempt to pre-register memory is made (IOMMU v2); - a DMA window is created (IOMMU v2). The @mm stays referenced till the container is destroyed. This replaces current->mm with container->mm everywhere except debug prints. This adds a check that current->mm is the same as the one stored in the container to prevent userspace from making changes to a memory context of other processes. DMA map/unmap ioctls() do not check for @mm as they already check for @enabled which is set after tce_iommu_mm_set() is called. This does not reference a task as multiple threads within the same mm are allowed to ioctl() to vfio and supposedly they will have same limits and capabilities and if they do not, we'll just fail with no harm made. Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit d7baee69 ] This changes mm_iommu_xxx helpers to take mm_struct as a parameter instead of getting it from @current which in some situations may not have a valid reference to mm. This changes helpers to receive @mm and moves all references to @current to the caller, including checks for !current and !current->mm; checks in mm_iommu_preregistered() are removed as there is no caller yet. This moves the mm_iommu_adjust_locked_vm() call to the caller as it receives mm_iommu_table_group_mem_t but it needs mm. This should cause no behavioral change. Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit 88f54a35 ] We are going to get rid of @current references in mmu_context_boos3s64.c and cache mm_struct in the VFIO container. Since mm_context_t does not have reference counting, we will be using mm_struct which does have the reference counter. This changes mm_iommu_init/mm_iommu_cleanup to receive mm_struct rather than mm_context_t (which is embedded into mm). This should not cause any behavioral change. Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit 39701e56 ] The iommu_table struct manages a hardware TCE table and a vmalloc'd table with corresponding userspace addresses. Both are allocated when the default DMA window is created and this happens when the very first group is attached to a container. As we are going to allow the userspace to configure container in one memory context and pas container fd to another, we have to postpones such allocations till a container fd is passed to the destination user process so we would account locked memory limit against the actual container user constrainsts. This postpones the it_userspace array allocation till it is used first time for mapping. The unmapping patch already checks if the array is allocated. Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit fa32ff65 ] With wrap around mappings in place we can always provide drivers with direct links to packets on the ring buffer, even when they wrap around. Do the required updates to get_next_pkt_raw()/put_pkt_raw() The first version of this commit was reverted (65a532f3) to deal with cross-tree merge issues which are (hopefully) resolved now. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Tested-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit 94acf164 ] Include calculations to compute the number of segments that comprise an aggregated large packet. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by:
Jonathan Maxwell <jmaxwell37@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Gavin Shan authored
[ Upstream commit f40ec3c7 ] Previously we enabled VFs and enable their memory space before calling pcibios_sriov_enable(). But pcibios_sriov_enable() may update the VF BARs: for example, on PPC PowerNV we may change them to manage the association of VFs to PEs. Because 64-bit BARs cannot be updated atomically, it's unsafe to update them while they're enabled. The half-updated state may conflict with other devices in the system. Call pcibios_sriov_enable() before enabling the VFs so any BAR updates happen while the VF BARs are disabled. [bhelgaas: changelog] Tested-by:
Carol Soto <clsoto@us.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 63880b23 ] VF BARs are read-only zero, so updating VF BARs will not have any effect. See the SR-IOV spec r1.1, sec 3.4.1.11. We already ignore these updates because of 70675e0b ("PCI: Don't try to restore VF BARs"); this merely restructures it slightly to make it easier to split updates for standard and SR-IOV BARs. Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 45d004f4 ] The BAR property bits (0-3 for memory BARs, 0-1 for I/O BARs) are supposed to be read-only, but we do save them in res->flags and include them when updating the BAR. Mask the I/O property bits with ~PCI_BASE_ADDRESS_IO_MASK (0x3) instead of PCI_REGION_FLAG_MASK (0xf) to make it obvious that we can't corrupt bits 2-3 of I/O addresses. Use PCI_ROM_ADDRESS_MASK for ROM BARs. This means we'll only check the top 21 bits (instead of the 28 bits we used to check) of a ROM BAR to see if the update was successful. Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 546ba9f8 ] If we update a VF BAR while it's enabled, there are two potential problems: 1) Any driver that's using the VF has a cached BAR value that is stale after the update, and 2) We can't update 64-bit BARs atomically, so the intermediate state (new lower dword with old upper dword) may conflict with another device, and an access by a driver unrelated to the VF may cause a bus error. Warn about attempts to update VF BARs while they are enabled. This is a programming error, so use dev_WARN() to get a backtrace. Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 7a6d312b ] Remove the assumption that IORESOURCE_ROM_ENABLE == PCI_ROM_ADDRESS_ENABLE. PCI_ROM_ADDRESS_ENABLE is the ROM enable bit defined by the PCI spec, so if we're reading or writing a BAR register value, that's what we should use. IORESOURCE_ROM_ENABLE is a corresponding bit in struct resource flags. Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 0b457dde ] pci_update_resource() updates a hardware BAR so its address matches the kernel's struct resource UNLESS it's a disabled ROM BAR. We only update those when we enable the ROM. It's not obvious from the code why ROM BARs should be handled specially. Apparently there are Matrox devices with defective ROM BARs that read as zero when disabled. That means that if pci_enable_rom() reads the disabled BAR, sets PCI_ROM_ADDRESS_ENABLE (without re-inserting the address), and writes it back, it would enable the ROM at address zero. Add comments and references to explain why we can't make the code look more rational. The code changes are from 755528c8 ("Ignore disabled ROM resources at setup") and 8085ce08 ("[PATCH] Fix PCI ROM mapping"). Link: https://lkml.org/lkml/2005/8/30/138Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 286c2378 ] pci_std_update_resource() only deals with standard BARs, so we don't have to worry about the complications of VF BARs in an SR-IOV capability. Compute the BAR address inline and remove pci_resource_bar(). That makes pci_iov_resource_bar() unused, so remove that as well. Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 6ffa2489 ] Previously pci_update_resource() used the same code path for updating standard BARs and VF BARs in SR-IOV capabilities. Split the VF BAR update into a new pci_iov_update_resource() internal interface, which makes it simpler to compute the BAR address (we can get rid of pci_resource_bar() and pci_iov_resource_bar()). This patch: - Renames pci_update_resource() to pci_std_update_resource(), - Adds pci_iov_update_resource(), - Makes pci_update_resource() a wrapper that calls the appropriate one, No functional change intended. Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit 59107e2f ] There is a feature in Hyper-V ('Debug-VM --InjectNonMaskableInterrupt') which injects NMI to the guest. We may want to crash the guest and do kdump on this NMI by enabling unknown_nmi_panic. To make kdump succeed we need to allow the kdump kernel to re-establish VMBus connection so it will see VMBus devices (storage, network,..). To properly unload VMBus making it possible to start over during kdump we need to do the following: - Send an 'unload' message to the hypervisor. This can be done on any CPU so we do this the crashing CPU. - Receive the 'unload finished' reply message. WS2012R2 delivers this message to the CPU which was used to establish VMBus connection during module load and this CPU may differ from the CPU sending 'unload'. Receiving a VMBus message means the following: - There is a per-CPU slot in memory for one message. This slot can in theory be accessed by any CPU. - We get an interrupt on the CPU when a message was placed into the slot. - When we read the message we need to clear the slot and signal the fact to the hypervisor. In case there are more messages to this CPU pending the hypervisor will deliver the next message. The signaling is done by writing to an MSR so this can only be done on the appropriate CPU. To avoid doing cross-CPU work on crash we have vmbus_wait_for_unload() function which checks message slots for all CPUs in a loop waiting for the 'unload finished' messages. However, there is an issue which arises when these conditions are met: - We're crashing on a CPU which is different from the one which was used to initially contact the hypervisor. - The CPU which was used for the initial contact is blocked with interrupts disabled and there is a message pending in the message slot. In this case we won't be able to read the 'unload finished' message on the crashing CPU. This is reproducible when we receive unknown NMIs on all CPUs simultaneously: the first CPU entering panic() will proceed to crash and all other CPUs will stop themselves with interrupts disabled. The suggested solution is to handle unknown NMIs for Hyper-V guests on the first CPU which gets them only. This will allow us to rely on VMBus interrupt handler being able to receive the 'unload finish' message in case it is delivered to a different CPU. The issue is not reproducible on WS2016 as Debug-VM delivers NMI to the boot CPU only, WS2012R2 and earlier Hyper-V versions are affected. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Michael Cyr authored
[ Upstream commit 8bf11557 ] This patch adds code to disconnect from the client, which will make sure any outstanding commands have been completed, before continuing on with the remove operation. Signed-off-by:
Michael Cyr <mikecyr@us.ibm.com> Signed-off-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by:
Steven Royer <seroyer@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Michael Cyr authored
[ Upstream commit c9b3379f ] This patch changes the way the IBM vSCSI server driver manages its Command/Response Queue (CRQ). We used to register the CRQ with phyp at probe time. Now we wait until tpg_enable_store. Similarly, when tpg_enable_store is called to "disable" (i.e. the stored value is 0), we unregister the queue with phyp. One consquence to this is that we have no need for the PART_UP_WAIT_ENAB state, since we can't get an Init Message from the client in our CRQ if we're waiting to be enabled, since we haven't registered the queue yet. Signed-off-by:
-
Michael Cyr authored
[ Upstream commit 79fac9c9 ] This patch reorders functions in a manner necessary for a follow-on patch. It also makes some minor styling changes (mostly removing extra spaces) and fixes some typos. There are no code changes in this patch, with one exception: due to the reordering of the functions, I needed to explicitly declare a function at the top of the file. However, this will be removed in the next patch, since the code requiring the predeclaration will be removed. Signed-off-by:
-
Michael Cyr authored
[ Upstream commit 7435b32e ] Signed-off-by:
-
