- 21 Apr, 2021 40 commits
-
-
Alex Sierra authored
[why] To support svm bo eviction mechanism. [how] If the BO crated has AMDGPU_AMDKFD_CREATE_SVM_BO flag set, enable_signal callback will be called inside amdgpu_evict_flags. This also causes gutting of the BO by removing all placements, so that TTM won't actually do an eviction. Instead it will discard the memory held by the BO. This is needed for HMM migration to user mode system memory pages. Signed-off-by:
Alex Sierra <alex.sierra@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Felix Kuehling authored
svm_bo eviction mechanism is different from regular BOs. Every SVM_BO created contains one eviction fence and one worker item for eviction process. SVM_BOs can be attached to one or more pranges. For SVM_BO eviction mechanism, TTM will start to call enable_signal callback for every SVM_BO until VRAM space is available. Here, all the ttm_evict calls are synchronous, this guarantees that each eviction has completed and the fence has signaled before it returns. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Alex Sierra authored
Add CREATE_SVM_BO define bit for SVM BOs. Another define flag was moved to concentrate these KFD type flags in one include file. Signed-off-by:
-
Alex Sierra authored
[why] As part of the SVM functionality, the eviction mechanism used for SVM_BOs is different. This mechanism uses one eviction fence per prange, instead of one fence per kfd_process. [how] A svm_bo reference to amdgpu_amdkfd_fence to allow differentiate between SVM_BO or regular BO evictions. This also include modifications to set the reference at the fence creation call. Signed-off-by:
-
Alex Sierra authored
Use SVM API to restore page tables when retry fault and compute context are enabled. Signed-off-by:
-
Felix Kuehling authored
Page table restore implementation in SVM API. This is called from the fault handler at amdgpu_vm. To update page tables through the page fault retry IH. Signed-off-by:
-
Alex Sierra authored
By default this timestamp is 32 bit counter. It gets overflowed in around 10 minutes. Signed-off-by:
-
Felix Kuehling authored
GPU page tables are invalidated by unmapping prange directly at the mmu notifier, when page fault retry is enabled through amdgpu_noretry global parameter. The restore page table is performed at the page fault handler. If xnack is on, we update GPU mappings after migration to avoid unnecessary GPUVM faults. Signed-off-by:
-
Felix Kuehling authored
If CPU page fault happens, HMM pgmap_ops callback migrate_to_ram start migrate memory from vram to ram in steps: 1. migrate_vma_pages get vram pages, and notify HMM to invalidate the pages, HMM interval notifier callback evict process queues 2. Allocate system memory pages 3. Use svm copy memory to migrate data from vram to ram 4. migrate_vma_pages copy pages structure from vram pages to ram pages 5. Return VM_FAULT_SIGBUS if migration failed, to notify application 6. migrate_vma_finalize put vram pages, page_free callback free vram pages and vram nodes 7. Restore work wait for migration is finished, then update GPU page table mapping to system memory, and resume process queues Signed-off-by:
-
Felix Kuehling authored
Register svm range with same address and size but perferred_location is changed from CPU to GPU or from GPU to CPU, trigger migration the svm range from ram to vram or from vram to ram. If svm range prefetch location is GPU with flags KFD_IOCTL_SVM_FLAG_HOST_ACCESS, validate the svm range on ram first, then migrate it from ram to vram. After migrating to vram is done, CPU access will have cpu page fault, page fault handler migrate it back to ram and resume cpu access. Migration steps: 1. migrate_vma_pages get svm range ram pages, notify the interval is invalidated and unmap from CPU page table, HMM interval notifier callback evict process queues 2. Allocate new pages in vram using TTM 3. Use svm copy memory to sdma copy data from ram to vram 4. migrate_vma_pages copy ram pages structure to vram pages structure 5. migrate_vma_finalize put ram pages to free ram pages and memory 6. Restore work wait for migration is finished, then update GPUs page table mapping to new vram pages, resume process queues If migrate_vma_setup failed to collect all ram pages of range, retry 3 times until success to start migration. Signed-off-by:
-
Philip Yang authored
Use sdma linear copy to migrate data between ram and vram. The sdma linear copy command uses kernel buffer function queue to access system memory through gart table. Use reserved gart table window 0 to map system page address, and vram page address is direct mapping. Use the same kernel buffer function to fill in gart table mapping, so this is serialized with memory copy by sdma job submit. We only need wait for the last memory copy sdma fence for larger buffer migration. Signed-off-by:
-
Philip Yang authored
amdgpu_gmc_get_vm_pte use bo_va->is_xgmi same hive information to set pte flags to update GPU mapping. Add local structure variable bo_va, and update bo_va.is_xgmi, pass it to mapping->bo_va while mapping to GPU. Assuming xgmi pstate is hi after boot. Signed-off-by:
-
Felix Kuehling authored
If svm range perfetch location is not zero, use TTM to alloc amdgpu_bo vram nodes to validate svm range, then map vram nodes to GPUs. Use offset to sub allocate from the same amdgpu_bo to handle overlap vram range while adding new range or unmapping range. svm_bo has ref count to trace the shared ranges. If all ranges of shared amdgpu_bo are migrated to ram, ref count becomes 0, then amdgpu_bo is released, all ranges svm_bo is set to NULL. To migrate range from ram back to vram, allocate the same amdgpu_bo with previous offset if the range has svm_bo. If prange migrate to VRAM, no CPU mapping exist, then process exit will not have unmap callback for this prange to free prange and svm bo. Free outstanding pranges from svms list before process is freed in svm_range_list_fini. Signed-off-by:
-
Philip Yang authored
HMM migration alloc sizeof(struct page) on system memory for each VRAM page, it is 1GB system memory reserved for 64GB VRAM. To avoid application OOM, increase system memory used size based on VRAM size of all GPUs, then application alloc memory will fail if system memory usage reach the limit. Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Reviewed-by:
-
Philip Yang authored
Register vram memory as MEMORY_DEVICE_PRIVATE type resource, to allocate vram backing pages for page migration. Signed-off-by:
-
Alex Sierra authored
Xnack retries are used for page fault recovery. Some AMD chip families support continuously retry while page table entries are invalid. The driver must handle the page fault interrupt and fill in a valid entry for the GPU to continue. This ioctl allows to enable/disable XNACK retries per KFD process. Signed-off-by:
-
Alex Sierra authored
XNACK mode controls the SQ RETRY_DISABLE setting that determines, whether recoverable page faults can be supported on GFXv9 hardware. Only on Aldebaran we can support different processes running with different XNACK modes. On older chips all processes must use the same RETRY_DISABLE setting. However, processes not relying on recoverable page faults can work with RETRY enabled. This means XNACK off is always available as a fallback so we can use the same mode on all GPUs in a process. Signed-off-by:
-
Felix Kuehling authored
This is needed to allow per-process XNACK mode selection in the SQ when booting with XNACK off by default. Signed-off-by:
-
Felix Kuehling authored
HMM interval notifier callback notify CPU page table will be updated, stop process queues if the updated address belongs to svm range registered in process svms objects tree. Scheduled restore work to update GPU page table using new pages address in the updated svm range. The restore worker flushes any deferred work to make sure it restores an up-to-date svm_range_list. Signed-off-by:
-
Felix Kuehling authored
Use amdgpu_vm_bo_update_mapping to update GPU page table to map or unmap svm range system memory pages address to GPUs. Signed-off-by:
-
Philip Yang authored
It will be used by kfd to map svm range to GPU, because svm range does not have amdgpu_bo and bo_va, cannot use amdgpu_bo_update interface, use amdgpu vm update interface directly. Signed-off-by:
-
Philip Yang authored
When application explicitly call unmap or unmap from mmput when application exit, driver will receive MMU_NOTIFY_UNMAP event to remove svm range from process svms object tree and list first, unmap from GPUs (in the following patch). Split the svm ranges to handle partial unmapping of svm ranges. To avoid deadlocks, updating MMU notifiers, range lists and interval trees is done in a deferred worker. New child ranges are attached to their parent range's child_list until the worker can update the svm_range_list. svm_range_set_attr flushes deferred work and takes the mmap_write_lock to guarantee that it has an up-to-date svm_range_list. Signed-off-by:
-
Philip Yang authored
Use HMM to get system memory pages address, which will be used to map to GPUs or migrate to vram. Signed-off-by:
-
Philip Yang authored
For larger range allocation, if hmm_range_fault return -EBUSY, set retry timeout based on 1 second for every 512MB, this is safe timeout value. Signed-off-by:
-
Philip Yang authored
Move the HMM get pages function from amdgpu_ttm and to amdgpu_mn. This common function will be used by new svm APIs. Signed-off-by:
-
Philip Yang authored
Get the intersection of attributes over all memory in the given range Signed-off-by:
-
Philip Yang authored
svm range structure stores the range start address, size, attributes, flags, prefetch location and gpu bitmap which indicates which GPU this range maps to. Same virtual address is shared by CPU and GPUs. Process has svm range list which uses both interval tree and list to store all svm ranges registered by the process. Interval tree is used by GPU vm fault handler and CPU page fault handler to get svm range structure from the specific address. List is used to scan all ranges in eviction restore work. No overlap range interval [start, last] exist in svms object interval tree. If process registers new range which has overlap with old range, the old range split into 2 ranges depending on the overlap happens at head or tail part of old range. Apply attributes preferred location, prefetch location, mapping flags, migration granularity to svm range, store mapping gpu index into bitmap. Signed-off-by:
-
Philip Yang authored
Add svm (shared virtual memory) ioctl data structure and API definition. The svm ioctl API is designed to be extensible in the future. All operations are provided by a single IOCTL to preserve ioctl number space. The arguments structure ends with a variable size array of attributes that can be used to set or get one or multiple attributes. Signed-off-by:
-
Alex Sierra authored
svm range uses gpu bitmap to store which GPU svm range maps to. Application pass driver gpu id to specify GPU, the helper is needed to convert gpu id to gpu bitmap idx. Access through kfd_process_device pointers array from kfd_process. Signed-off-by:
-
Felix Kuehling authored
This shortcut is no longer needed with access managed properly by KFD. Signed-off-by:
-
Felix Kuehling authored
DRM render node file handles are used for CPU mapping of BOs using mmap by the Thunk. It uses the DRM render node of the GPU where the BO was allocated. DRM allows mmap access automatically when it creates a GEM handle for a BO. KFD BOs don't have GEM handles, so KFD needs to manage access manually. Use drm_vma_node_allow to allow user mode to mmap BOs allocated with kfd_ioctl_alloc_memory_of_gpu through the DRM render node that was used in the kfd_ioctl_acquire_vm call for the same GPU. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Felix Kuehling authored
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu needs the drm_priv to allow mmap to access the BO through the corresponding file descriptor. The VM can also be extracted from drm_priv, so drm_priv can replace the vm parameter in the kfd2kgd interface. Signed-off-by:
-
Alex Deucher authored
Aldebaran has a hw fix so no longer requires the workaround. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Jinzhou Su authored
The buffer of SA bo will be used by many cases. So it's better to invalidate the cache of indirect buffer allocated by SA before commit the IB. Signed-off-by:
Jinzhou Su <Jinzhou.Su@amd.com> Reviewed-by:
-
Mukul Joshi authored
Fix the following issues with SDMA RAS error reporting: 1. Read the EDC_COUNTER2 register also to fetch error counts for all sub-blocks in SDMA. 2. SDMA RAS on Aldebaran suports single-bit uncorrectable errors only. So, report error count in UE count instead of CE count. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-By:
John Clements <John.Clements@amd.com> Signed-off-by:
-
Mukul Joshi authored
Reset the RAS error count and error status registers after reading to prevent over reporting error counts on Aldebaran. Signed-off-by:
-
Oak Zeng authored
This reverts commit 2f055097. 2f055097 was a driver workaround when PSP firmware was not ready. Now the PSP fw is ready so we revert this driver workaround. Signed-off-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Anthony Koo authored
Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Bing Guo authored
[Why] Some MST devices uses different method to enable mst specific stream features. [How] Add dm_helpers_mst_enable_stream features. This can be modified later when we are ready to implement those features. Signed-off-by:
Bing Guo <bing.guo@amd.com> Reviewed-by:
-
