This patch removes all of the mode-translation logic.  It's no longer
needed, as the upper-level drivers now all issue the proper 10-byte
commands.  This is a large patch, but what it's doing is removing a great
deal of unneeded code -- about 650+ lines removed, according to diffstat.

Those of you who are having some trouble getting your DVD-RAMs detected
properly should have all your problems solved by an upcoming patch from the
SCSI folks.  It may look like that problem is related to this patch, but it
isn't -- it's a side-effect of another SCSI patch to consolidate code.

Special thanks to James Bottomley for being patient enough to work with me
on these issues on the SCSI layer.

This, BTW, makes US_FL_MODE_XLATE a NOP.  The symbol is kept for the
purpose of allowing unusual_devs.h to be consistent between 2.4 and 2.5

There are still a few places where more code could (potentially) be
removed.  I need to mull over the UFI specification to be sure, tho.

This patch converts the ISD200 and Jumpshot drivers to use the new DMA-safe
buffer.


I'd also like to take a moment to thank Alan Stern, who writes many of
these patches.  Without his help, many of the improvements everyone has
seen over the 2.5.x series would not have been possible.

into kroah.com:/home/greg/linux/BK/gregkh-2.5

This patch includes quite a few changes and updates for the shwdt driver (which
brings it in sync with LinuxSH CVS HEAD). This fixes up support for the SH-2,
and also fixes up some timer brain-damage.

This patch updates the sh-specific hd64465 pcmcia driver for the new API, as
well as fixing up some other issues (such as remap_page_range() abuse -- we
remap through P3 area instead) which caused it not to compile. Changes by
Dominik Brodowski and myself.

Here's an update for pvr2fb (with a patch this time), which makes it compile
again.

ppc64 machines can have PCI bus numbers larger than 8 bits, but it looks
like pci_device_to_OF_node already handles this case, in both 2.4 and
2.5.

We just need the space to store them.

This solves the unresolved symbol problem with modular intermezzo.  Also
update the MAINTAINERS entry.

send_IPI_self is needed to resend irqs with IRQ_PENDING status when
enabled.

Checked with Ingo, and it's in 2.4-ac for some time.

This should fix ide lost interrupts on UP with IO-APIC

Ide trigers it this way:
 - disable_irq
 - do stuff that triggers IRQ.
 - irq is IRQ_PENDING
 - enable_irq
 - IRQ is lost, needs to be resend.

I'll send the patch to fixup IDE disable_irq logic to Bart.

From Flavio B. Leitner. <fbl@netbank.com.br>

Fix a memory leak and an unchecked return code in the busmouse driver.

From Daniele Bellucci <bellucda@tiscali.it>.

Check the copy_to_user() return code in read_profile().

From Jorn Engel <joern@wohnheim.fh-wedel.de> and Randy Dunlap.

It reduces stack usage in the WAN router by about 0x500 bytes
(from 0x520 to 0x24 when I did it in April).

This fixes this warning:

  syncppp.c:165: warning: function declaration isn't a prototype

by adding "void" as the function parameter list.

This fixes one place where I missed the replacing dcache_lock with
vfsmount_lock in put_namespace().

Tested with CLONE_NEWNS flag also.

3 more device ids added to ipaq.c/ipaq.h

 Added ids for the Rover P5, Toshiba E310 and E335. Thanks to
 Matthijs van der Molen, Pavel Stoliarov, Tod B. Schmidt and
 Matt Hartley.

Patch for 2.4.22 ftdi_sio to add DSS-20 SyncStation to ftdi_sio - the
SyncStation is the usb cradle for the Sony Ericsson P800 phone.

First "test" kernel. Same naming we used for 2.4.0 - there it took
from May to December to get to the real version. Let's see if we
can do it faster this time.

into home.osdl.org:/home/torvalds/v2.5/linux

into kernel.bkbits.net:/home/davem/net-2.5

Switching the PCMCIA interrupts from serial PCI interrupts to parallel
PCI interrupts causes machines to hang solid.  If we leave such setups
well alone, and only change the interrupt mode of parallel PCI systems
between PCI+ISA and PCI only.

into nuts.ninka.net:/home/davem/src/BK/net-2.5

From Matthew Wilcox <willy@debian.org>.

into kanga.twiddle.net:/home/rth/work/linux/axp-2.5

The accounting works now, but I still think this last bit should be
added as well.  This makes absolutely sure we only account fs requests,
at both ends. Better safe than sorry.

The recent change from Andi breaks here: tmp.name is user pointer, not
array in __sysctl_args, and so it is better to access it through
copy_from_user instead of directly.

into home.osdl.org:/home/torvalds/v2.5/linux

Didn't turn up anything particularly nasty, but it does clean up
usage of a few types that are passed around.
- Do the casts in the ioctl handler instead.
- Remove unused variables.
- __user annotations.

into home.osdl.org:/home/torvalds/v2.5/linux

into tetrachloride.(none):/mnt/raid/src/kernel/2.5/agpgart

Again, untested in AGP3.x mode.

into tetrachloride.(none):/mnt/raid/src/kernel/2.5/agpgart

This (and a few other SiS chipsets) are AGP 3 compliant. AFAIK, none of
these have been tested in AGP3 mode, but they should work just fine in
AGP2.x mode at least.