- 08 Jan, 2014 10 commits
-
-
Shannon Nelson authored
Move PF ID initialization code from PF reset routine to earlier driver initialization function. There are a few operations which need the PF ID before the first PF reset is called. Change-Id: I7e971f7556b46a837149850ec05ce115c35db575 Signed-off-by:
Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Use a smaller range of test registers in MFP mode as there are fewer resources than when in SFP mode. Change-Id: I08424890c3f57b5dde5ee99e99724ce252e0875a Signed-off-by:
-
Shannon Nelson authored
The firmware's AdminQ interface has matured a little, so update the code to use the new fields and values. Change-Id: I8fcd7b443f268dcf9346bd6a9e940fe9c2958891 Signed-off-by:
-
Shannon Nelson authored
The RSTAT comes back with DEVICE READY to indicate that the HW is ready, but we still have to wait for the FW to indicate that the Core and Global modules are back up again. This needs a read of the NVM_ULD register. Change-Id: I88276165f9cd446d2f166fb4b8cff00521af4bec Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by:
-
Catherine Sullivan authored
Version update to 0.3.25-k Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Greg Rose authored
The VF is allowed to request the PF to set its already assigned MAC address without generating an error. Change-Id: I8dfdf353396995dbbb26cafab4e42b451911da3d Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
-
Greg Rose authored
When the 8021q driver is loaded it sets VLAN 0 filters on all devices. This does not mean that any VLAN tagged packet should be accepted. Instead accept only VLAN 0 tagged packets so that upper layers can interpret the priority bits. Change-Id: I17274a540b613749612ffe23a3aef2b8ee6ff6a4 Signed-off-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
-
Greg Rose authored
Broadcast promiscuous should only be turned on when general promiscuous mode is turned on, otherwise VLAN tagged packets out of the assigned VLAN domain are received. Add a broadcast MAC filter in order to continue to receive broadcast traffic on VLANs, MAIN or VMDQ VSI. Change-Id: I99d8e382a082ee51201228f1226af3b46452ac55 Signed-off-by:
-
Anjali Singhai Jain authored
Add more functionality to debugfs to assist development and testing of AQ commands. adds: send aq_cmd send indirect aq_cmd Change-Id: I01710cddd33110a6c1e1aabf84cb6e93cda4c42a Signed-off-by:
-
Ying Xue authored
Fix below compiler warning: net/xfrm/xfrm_policy.c:1644:12: warning: ‘xfrm_dst_alloc_copy’ defined but not used [-Wunused-function] Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 07 Jan, 2014 18 commits
-
-
David S. Miller authored
Jon Maloy says: ==================== tipc: link setup and failover improvements This series consists of four unrelated commits with different purposes. - Commit #1 is purely cosmetic and pedagogic, hopefully making the failover/tunneling logics slightly easier to understand. - Commit #2 fixes a bug that has always been in the code, but was not discovered until very recently. - Commit #3 fixes a non-fatal race issue in the neighbour discovery code. - Commit #4 removes an unnecessary indirection step during link startup. ==================== Signed-off-by: -
Jon Paul Maloy authored
When a link is created we delay the start event by launching it to be executed later in a tasklet. As we hold all the necessary locks at the moment of creation, and there is no risk of deadlock or contention, this delay serves no purpose in the current code. We remove this obsolete indirection step, and the associated function link_start(). At the same time, we rename the function tipc_link_stop() to the more appropriate tipc_link_purge_queues(). Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Reviewed-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Ying Xue authored
Currently, only 'bearer_lock' is used to protect struct link_req in the function disc_timeout(). This is unsafe, since the member fields 'num_nodes' and 'timer_intv' might be accessed by below three different threads simultaneously, none of them grabbing bearer_lock in the critical region: link_activate() tipc_bearer_add_dest() tipc_disc_add_dest() req->num_nodes++; tipc_link_reset() tipc_bearer_remove_dest() tipc_disc_remove_dest() req->num_nodes-- disc_update() read req->num_nodes write req->timer_intv disc_timeout() read req->num_nodes read/write req->timer_intv Without lock protection, the only symptom of a race is that discovery messages occasionally may not be sent out. This is not fatal, since such messages are best-effort anyway. On the other hand, since discovery messages are not time critical, adding a protecting lock brings no serious overhead either. So we add a new, dedicated spinlock in order to guarantee absolute data consistency in link_req objects. This also helps reduce the overall role of the bearer_lock, which we want to remove completely in a later commit series. Signed-off-by: -
Jon Paul Maloy authored
The flag 'has_redundant_link' is defined only in RESET and ACTIVATE protocol messages. Due to an ambiguity in the protocol specification it is currently also transferred in STATE messages. Its value is used to initialize a link state variable, 'permit_changeover', which is used to inhibit futile link failover attempts when it is known that the peer node has no working links at the moment, although the local node may still think it has one. The fact that 'has_redundant_link' incorrectly is read from STATE messages has the effect that 'permit_changeover' sometimes gets a wrong value, and permanently blocks any links from being re-established. Such failures can only occur in in dual-link systems, and are extremely rare. This bug seems to have always been present in the code. Furthermore, since commit b4b56102 ("tipc: Ensure both nodes recognize loss of contact between them"), the 'permit_changeover' field serves no purpose any more. The task of enforcing 'lost contact' cycles at both peer endpoints is now taken by a new mechanism, using the flags WAIT_NODE_DOWN and WAIT_PEER_DOWN in struct tipc_node to abort unnecessary failover attempts. We therefore remove the 'has_redundant_link' flag from STATE messages, as well as the now redundant 'permit_changeover' variable. Signed-off-by:
-
Jon Paul Maloy authored
The functionality related to link addition and failover is unnecessarily hard to understand and maintain. We try to improve this by renaming some of the functions, at the same time adding or improving the explanatory comments around them. Names such as "tipc_rcv()" etc. also align better with what is used in other networking components. The changes in this commit are purely cosmetic, no functional changes are made. Signed-off-by:
-
Daniel Borkmann authored
We should const-ify comparisons on skb_queue_* inline helper functions as their parameters are const as well, so lets not drop that. Suggested-by:
Brad Spengler <spender@grsecurity.net> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
Fix three warnings related to: net/xfrm/xfrm_policy.c:1644:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration] net/xfrm/xfrm_policy.c:1656:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration] net/xfrm/xfrm_policy.c:1668:1: warning: 'inline' is not at beginning of declaration [-Wold-style-declaration] Just removing the inline keyword is sufficient as the compiler will decide on its own about inlining or not. Signed-off-by:
-
Shawn Bohrer authored
Now that mlx4_en includes a PHC driver it must select PTP_1588_CLOCK. drivers/built-in.o: In function `mlx4_en_get_ts_info': >> en_ethtool.c:(.text+0x391a11): undefined reference to `ptp_clock_index' drivers/built-in.o: In function `mlx4_en_remove_timestamp': >> (.text+0x397913): undefined reference to `ptp_clock_unregister' drivers/built-in.o: In function `mlx4_en_init_timestamp': >> (.text+0x397b20): undefined reference to `ptp_clock_register' Fixes: ad7d4eae ("mlx4_en: Add PTP hardware clock") Signed-off-by:
Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by:
-
Jerry Chu authored
This patch built on top of Commit 299603e8 ("net-gro: Prepare GRO stack for the upcoming tunneling support") to add the support of the standard GRE (RFC1701/RFC2784/RFC2890) to the GRO stack. It also serves as an example for supporting other encapsulation protocols in the GRO stack in the future. The patch supports version 0 and all the flags (key, csum, seq#) but will flush any pkt with the S (seq#) flag. This is because the S flag is not support by GSO, and a GRO pkt may end up in the forwarding path, thus requiring GSO support to break it up correctly. Currently the "packet_offload" structure only contains L3 (ETH_P_IP/ ETH_P_IPV6) GRO offload support so the encapped pkts are limited to IP pkts (i.e., w/o L2 hdr). But support for other protocol type can be easily added, so is the support for GRE variations like NVGRE. The patch also support csum offload. Specifically if the csum flag is on and the h/w is capable of checksumming the payload (CHECKSUM_COMPLETE), the code will take advantage of the csum computed by the h/w when validating the GRE csum. Note that commit 60769a5d "ipv4: gre: add GRO capability" already introduces GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. But GRO is done after GRE hdr has been removed (i.e., decapped). The following patch applies GRO when pkts first come in (before hitting the GRE tunnel code). There is some performance advantage for applying GRO as early as possible. Also this approach is transparent to other subsystem like Open vSwitch where GRE decap is handled outside of the IP stack hence making it harder for the gro_cells stuff to apply. On the other hand, some NICs are still not capable of hashing on the inner hdr of a GRE pkt (RSS). In that case the GRO processing of pkts from the same remote host will all happen on the same CPU and the performance may be suboptimal. I'm including some rough preliminary performance numbers below. Note that the performance will be highly dependent on traffic load, mix as usual. Moreover it also depends on NIC offload features hence the following is by no means a comprehesive study. Local testing and tuning will be needed to decide the best setting. All tests spawned 50 copies of netperf TCP_STREAM and ran for 30 secs. (super_netperf 50 -H 192.168.1.18 -l 30) An IP GRE tunnel with only the key flag on (e.g., ip tunnel add gre1 mode gre local 10.246.17.18 remote 10.246.17.17 ttl 255 key 123) is configured. The GRO support for pkts AFTER decap are controlled through the device feature of the GRE device (e.g., ethtool -K gre1 gro on/off). 1.1 ethtool -K gre1 gro off; ethtool -K eth0 gro off thruput: 9.16Gbps CPU utilization: 19% 1.2 ethtool -K gre1 gro on; ethtool -K eth0 gro off thruput: 5.9Gbps CPU utilization: 15% 1.3 ethtool -K gre1 gro off; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 12-13% 1.4 ethtool -K gre1 gro on; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 10% The following tests were performed on a different NIC that is capable of csum offload. I.e., the h/w is capable of computing IP payload csum (CHECKSUM_COMPLETE). 2.1 ethtool -K gre1 gro on (hence will use gro_cells) 2.1.1 ethtool -K eth0 gro off; csum offload disabled thruput: 8.53Gbps CPU utilization: 9% 2.1.2 ethtool -K eth0 gro off; csum offload enabled thruput: 8.97Gbps CPU utilization: 7-8% 2.1.3 ethtool -K eth0 gro on; csum offload disabled thruput: 8.83Gbps CPU utilization: 5-6% 2.1.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.98Gbps CPU utilization: 5% 2.2 ethtool -K gre1 gro off 2.2.1 ethtool -K eth0 gro off; csum offload disabled thruput: 5.93Gbps CPU utilization: 9% 2.2.2 ethtool -K eth0 gro off; csum offload enabled thruput: 5.62Gbps CPU utilization: 8% 2.2.3 ethtool -K eth0 gro on; csum offload disabled thruput: 7.69Gbps CPU utilization: 8% 2.2.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.96Gbps CPU utilization: 5-6% Signed-off-by:
H.K. Jerry Chu <hkchu@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Benjamin Poirier authored
There are many cases where this feature does not improve performance or even reduces it. For example, here are the results from tests that I've run using 3.12.6 on one Intel Xeon W3565 and one i7 920 connected by ixgbe adapters. The results are from the Xeon, but they're similar on the i7. All numbers report the mean±stddev over 10 runs of 10s. 1) latency tests similar to what is described in "c6e1a0d1 net: Allow no-cache copy from user on transmit" There is no statistically significant difference between tx-nocache-copy on/off. nic irqs spread out (one queue per cpu) 200x netperf -r 1400,1 tx-nocache-copy off 692000±1000 tps 50/90/95/99% latency (us): 275±2/643.8±0.4/799±1/2474.4±0.3 tx-nocache-copy on 693000±1000 tps 50/90/95/99% latency (us): 274±1/644.1±0.7/800±2/2474.5±0.7 200x netperf -r 14000,14000 tx-nocache-copy off 86450±80 tps 50/90/95/99% latency (us): 334.37±0.02/838±1/2100±20/3990±40 tx-nocache-copy on 86110±60 tps 50/90/95/99% latency (us): 334.28±0.01/837±2/2110±20/3990±20 2) single stream throughput tests tx-nocache-copy leads to higher service demand throughput cpu0 cpu1 demand (Gb/s) (Gcycle) (Gcycle) (cycle/B) nic irqs and netperf on cpu0 (1x netperf -T0,0 -t omni -- -d send) tx-nocache-copy off 9402±5 9.4±0.2 0.80±0.01 tx-nocache-copy on 9403±3 9.85±0.04 0.838±0.004 nic irqs on cpu0, netperf on cpu1 (1x netperf -T1,1 -t omni -- -d send) tx-nocache-copy off 9401±5 5.83±0.03 5.0±0.1 0.923±0.007 tx-nocache-copy on 9404±2 5.74±0.03 5.523±0.009 0.958±0.002 As a second example, here are some results from Eric Dumazet with latest net-next. tx-nocache-copy also leads to higher service demand (cpu is Intel(R) Xeon(R) CPU X5660 @ 2.80GHz) lpq83:~# ./ethtool -K eth0 tx-nocache-copy on lpq83:~# perf stat ./netperf -H lpq84 -c MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpq84.prod.google.com () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB 87380 16384 16384 10.00 9407.44 2.50 -1.00 0.522 -1.000 Performance counter stats for './netperf -H lpq84 -c': 4282.648396 task-clock # 0.423 CPUs utilized 9,348 context-switches # 0.002 M/sec 88 CPU-migrations # 0.021 K/sec 355 page-faults # 0.083 K/sec 11,812,797,651 cycles # 2.758 GHz [82.79%] 9,020,522,817 stalled-cycles-frontend # 76.36% frontend cycles idle [82.54%] 4,579,889,681 stalled-cycles-backend # 38.77% backend cycles idle [67.33%] 6,053,172,792 instructions # 0.51 insns per cycle # 1.49 stalled cycles per insn [83.64%] 597,275,583 branches # 139.464 M/sec [83.70%] 8,960,541 branch-misses # 1.50% of all branches [83.65%] 10.128990264 seconds time elapsed lpq83:~# ./ethtool -K eth0 tx-nocache-copy off lpq83:~# perf stat ./netperf -H lpq84 -c MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpq84.prod.google.com () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB 87380 16384 16384 10.00 9412.45 2.15 -1.00 0.449 -1.000 Performance counter stats for './netperf -H lpq84 -c': 2847.375441 task-clock # 0.281 CPUs utilized 11,632 context-switches # 0.004 M/sec 49 CPU-migrations # 0.017 K/sec 354 page-faults # 0.124 K/sec 7,646,889,749 cycles # 2.686 GHz [83.34%] 6,115,050,032 stalled-cycles-frontend # 79.97% frontend cycles idle [83.31%] 1,726,460,071 stalled-cycles-backend # 22.58% backend cycles idle [66.55%] 2,079,702,453 instructions # 0.27 insns per cycle # 2.94 stalled cycles per insn [83.22%] 363,773,213 branches # 127.757 M/sec [83.29%] 4,242,732 branch-misses # 1.17% of all branches [83.51%] 10.128449949 seconds time elapsed CC: Tom Herbert <therbert@google.com> Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Signed-off-by:
-
Jiri Pirko authored
When lo is brought up, new ifa is created. Then, devconf and neigh values bitfield should be set so later changes of default values would not affect lo values. Note that the same behaviour is in ipv6. Also note that this is likely not an issue in many distros (for example Fedora 19) because userspace sets address to lo manually before bringing it up. Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
FX Le Bail authored
This change allows to follow a recommandation of RFC4942. - Add "anycast_src_echo_reply" sysctl to control the use of anycast addresses as source addresses for ICMPv6 echo reply. This sysctl is false by default to preserve existing behavior. - Add inline check ipv6_anycast_destination(). - Use them in icmpv6_echo_reply(). Reference: RFC4942 - IPv6 Transition/Coexistence Security Considerations (http://tools.ietf.org/html/rfc4942#section-2.1.6) 2.1.6. Anycast Traffic Identification and Security [...] To avoid exposing knowledge about the internal structure of the network, it is recommended that anycast servers now take advantage of the ability to return responses with the anycast address as the source address if possible. Signed-off-by:
Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0. Fixes: 837052d0 ('net/mlx4_en: Add netdev support for TCP/IP offloads of vxlan tunneling') Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Hayes Wang authored
- Replace pr_warn_ratelimited() with net_ratelimit() and netdev_warn(). - Adjust the algnment of some messages. - Remove the peroid. - Fix some messages don't have terminating newline. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
David S. Miller authored
> as reported for linux-next of Dec.20, 2013 > when CONFIG_NEED_DMA_MAP_STATE is not enabled: > > drivers/net/ethernet/brocade/bna/bnad.c: In function 'bnad_start_xmit': > drivers/net/ethernet/brocade/bna/bnad.c:3074:26: error: 'struct bnad_tx_vector' has no member named 'dma_len' Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Eric Dumazet authored
GRO/GSO layers can be enabled on a node, even if said node is only forwarding packets. This patch permits GSO (and upcoming GRO) support for GRE encapsulated packets, even if the host has no GRE tunnel setup. Signed-off-by:
-
Hauke Mehrtens authored
This fixes some typos found by Sergei. Reported-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitchDavid S. Miller authored
Jesse Gross says: ==================== [GIT net-next] Open vSwitch Open vSwitch changes for net-next/3.14. Highlights are: * Performance improvements in the mechanism to get packets to userspace using memory mapped netlink and skb zero copy where appropriate. * Per-cpu flow stats in situations where flows are likely to be shared across CPUs. Standard flow stats are used in other situations to save memory and allocation time. * A handful of code cleanups and rationalization. ==================== Signed-off-by:
-
- 06 Jan, 2014 12 commits
-
-
Stephen Hemminger authored
Several functions and datastructures could be local Found with 'make namespacecheck' Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Jesse Gross <jesse@nicira.com>
-
Thomas Graf authored
The copy & csum optimization is no longer present with zerocopy enabled. Compute the checksum in skb_gso_segment() directly by dropping the HW CSUM capability from the features passed in. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Thomas Graf authored
Use of skb_zerocopy() can avoid the expensive call to memcpy() when copying the packet data into the Netlink skb. Completes checksum through skb_checksum_help() if not already done in GSO segmentation. Zerocopy is only performed if user space supported unaligned Netlink messages. memory mapped netlink i/o is preferred over zerocopy if it is set up. Cost of upcall is significantly reduced from: + 7.48% vhost-8471 [k] memcpy + 5.57% ovs-vswitchd [k] memcpy + 2.81% vhost-8471 [k] csum_partial_copy_generic to: + 5.72% ovs-vswitchd [k] memcpy + 3.32% vhost-5153 [k] memcpy + 0.68% vhost-5153 [k] skb_zerocopy (megaflows disabled) Signed-off-by:
-
Thomas Graf authored
Allows removing the net and dp_ifindex argument and simplify the code. Signed-off-by:
-
Thomas Graf authored
Drop user features if an outdated user space instance that does not understand the concept of user_features attempted to create a new datapath. Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
-
Thomas Graf authored
Make the skb zerocopy logic written for nfnetlink queue available for use by other modules. Signed-off-by:
-
Wei Yongjun authored
Remove duplicated include. Signed-off-by:
-
Daniel Borkmann authored
As we're only doing a kfree() anyway in the RCU callback, we can simply use kfree_rcu, which does the same job, and remove the function rcu_free_sw_flow_mask_cb() and rcu_free_acts_callback(). Signed-off-by:
-
Pravin B Shelar authored
With mega flow implementation ovs flow can be shared between multiple CPUs which makes stats updates highly contended operation. This patch uses per-CPU stats in cases where a flow is likely to be shared (if there is a wildcard in the 5-tuple and therefore likely to be spread by RSS). In other situations, it uses the current strategy, saving memory and allocation time. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Thomas Graf authored
Use memory mapped Netlink i/o for all unicast openvswitch communication if a ring has been set up. Benchmark * pktgen -> ovs internal port * 5M pkts, 5M flows * 4 threads, 8 cores Before: Result: OK: 67418743(c67108212+d310530) usec, 5000000 (9000byte,0frags) 74163pps 5339Mb/sec (5339736000bps) errors: 0 + 2.98% ovs-vswitchd [k] copy_user_generic_string + 2.49% ovs-vswitchd [k] memcpy + 1.84% kpktgend_2 [k] memcpy + 1.81% kpktgend_1 [k] memcpy + 1.81% kpktgend_3 [k] memcpy + 1.78% kpktgend_0 [k] memcpy After: Result: OK: 24229690(c24127165+d102524) usec, 5000000 (9000byte,0frags) 206358pps 14857Mb/sec (14857776000bps) errors: 0 + 2.80% ovs-vswitchd [k] memcpy + 1.31% kpktgend_2 [k] memcpy + 1.23% kpktgend_0 [k] memcpy + 1.09% kpktgend_1 [k] memcpy + 1.04% kpktgend_3 [k] memcpy + 0.96% ovs-vswitchd [k] copy_user_generic_string Signed-off-by:
-
Thomas Graf authored
An insufficent ring frame size configuration can lead to an unnecessary skb allocation for every Netlink message. Check frame size before taking the queue lock and allocating the skb and re-check with lock to be safe. Signed-off-by:
-
