- 20 May, 2016 27 commits
-
-
Joonsoo Kim authored
Currently, determination to free a slab is done whenever each freed object is put into the slab. This has a following problem. Assume free_limit = 10 and nr_free = 9. Free happens as following sequence and nr_free changes as following. free(become a free slab) free(not become a free slab) nr_free: 9 -> 10 (at first free) -> 11 (at second free) If we try to check if we can free current slab or not on each object free, we can't free any slab in this situation because current slab isn't a free slab when nr_free exceed free_limit (at second free) even if there is a free slab. However, if we check it lastly, we can free 1 free slab. This problem would cause to keep too much memory in the slab subsystem. This patch try to fix it by checking number of free object after all free work is done. If there is free slab at that time, we can free slab as much as possible so we keep free slab as minimal. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joonsoo Kim authored
There are mostly same code for setting up kmem_cache_node either in cpuup_prepare() or alloc_kmem_cache_node(). Factor out and clean-up them. Signed-off-by:
Nishanth Menon <nm@ti.com> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Joonsoo Kim authored
It can be reused on other place, so factor out it. Following patch will use it. Signed-off-by:
-
Joonsoo Kim authored
slabs_tofree() implies freeing all free slab. We can do it with just providing INT_MAX. Signed-off-by:
-
Joonsoo Kim authored
Initial attemp to remove BAD_ALIEN_MAGIC is once reverted by 'commit edcad250 ("Revert "slab: remove BAD_ALIEN_MAGIC"")' because it causes a problem on m68k which has many node but !CONFIG_NUMA. In this case, although alien cache isn't used at all but to cope with some initialization path, garbage value is used and that is BAD_ALIEN_MAGIC. Now, this patch set use_alien_caches to 0 when !CONFIG_NUMA, there is no initialization path problem so we don't need BAD_ALIEN_MAGIC at all. So remove it. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
Joonsoo Kim authored
While processing concurrent allocation, SLAB could be contended a lot because it did a lots of work with holding a lock. This patchset try to reduce the number of critical section to reduce lock contention. Major changes are lockless decision to allocate more slab and lockless cpu cache refill from the newly allocated slab. Below is the result of concurrent allocation/free in slab allocation benchmark made by Christoph a long time ago. I make the output simpler. The number shows cycle count during alloc/free respectively so less is better. * Before Kmalloc N*alloc N*free(32): Average=365/806 Kmalloc N*alloc N*free(64): Average=452/690 Kmalloc N*alloc N*free(128): Average=736/886 Kmalloc N*alloc N*free(256): Average=1167/985 Kmalloc N*alloc N*free(512): Average=2088/1125 Kmalloc N*alloc N*free(1024): Average=4115/1184 Kmalloc N*alloc N*free(2048): Average=8451/1748 Kmalloc N*alloc N*free(4096): Average=16024/2048 * After Kmalloc N*alloc N*free(32): Average=344/792 Kmalloc N*alloc N*free(64): Average=347/882 Kmalloc N*alloc N*free(128): Average=390/959 Kmalloc N*alloc N*free(256): Average=393/1067 Kmalloc N*alloc N*free(512): Average=683/1229 Kmalloc N*alloc N*free(1024): Average=1295/1325 Kmalloc N*alloc N*free(2048): Average=2513/1664 Kmalloc N*alloc N*free(4096): Average=4742/2172 It shows that performance improves greatly (roughly more than 50%) for the object class whose size is more than 128 bytes. This patch (of 11): If we don't hold neither the slab_mutex nor the node lock, node's shared array cache could be freed and re-populated. If __kmem_cache_shrink() is called at the same time, it will call drain_array() with n->shared without holding node lock so problem can happen. This patch fix the situation by holding the node lock before trying to drain the shared array. In addition, add a debug check to confirm that n->shared access race doesn't exist. Signed-off-by:
-
Arnd Bergmann authored
A recent cleanup removed some exported functions that were not used anywhere, which in turn exposed the fact that some other functions in the same file are only used in some configurations. We now get a warning about them when CONFIG_HOTPLUG_CPU is disabled: kernel/padata.c:670:12: error: '__padata_remove_cpu' defined but not used [-Werror=unused-function] static int __padata_remove_cpu(struct padata_instance *pinst, int cpu) ^~~~~~~~~~~~~~~~~~~ kernel/padata.c:650:12: error: '__padata_add_cpu' defined but not used [-Werror=unused-function] static int __padata_add_cpu(struct padata_instance *pinst, int cpu) This rearranges the code so the __padata_remove_cpu/__padata_add_cpu functions are within the #ifdef that protects the code that calls them. [akpm@linux-foundation.org: coding-style fixes] Fixes: 4ba6d78c671e ("kernel/padata.c: removed unused code") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Cc: Richard Cochran <rcochran@linutronix.de> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Richard Cochran authored
By accident I stumbled across code that has never been used. This driver has EXPORT_SYMBOL functions, and the only user of the code is pcrypt.c, but this only uses a subset of the exported symbols. According to 'git log -G', the functions, padata_set_cpumasks, padata_add_cpu, and padata_remove_cpu have never been used since they were first introduced. This patch removes the unused code. On one 64 bit build, with CRYPTO_PCRYPT built in, the text is more than 4k smaller. kbuild_hp> size $KBUILD_OUTPUT/vmlinux text data bss dec hex filename 10566658 4678360 1122304 16367322 f9beda vmlinux 10561984 4678360 1122304 16362648 f9ac98 vmlinux On another config, 32 bit, the saving is about 0.5k bytes. kbuild_hp-x86> size $KBUILD_OUTPUT/vmlinux 6012005 2409513 2785280 11206798 ab008e vmlinux 6011491 2409513 2785280 11206284 aafe8c vmlinux Signed-off-by:Richard Cochran <rcochran@linutronix.de> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Guozhonghua authored
The goto is not useful in ocfs2_put_slot(), so delete it. Signed-off-by:
Guozhonghua <guozhonghua@h3c.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
Jun Piao authored
Clean up unused parameter 'count' in o2hb_read_block_input(). Signed-off-by:
Jun Piao <piaojun@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
piaojun authored
Clean up an unused variable 'wants_rotate' in ocfs2_truncate_rec. Signed-off-by:
-
Guozhonghua authored
The comment in ocfs2_extended_slot has the offset wrong. Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
Du, Changbin authored
When activating a static object we need make sure that the object is tracked in the object tracker. If it is a non-static object then the activation is illegal. In previous implementation, each subsystem need take care of this in their fixup callbacks. Actually we can put it into debugobjects core. Thus we can save duplicated code, and have *pure* fixup callbacks. To achieve this, a new callback "is_static_object" is introduced to let the type specific code decide whether a object is static or not. If yes, we take it into object tracker, otherwise give warning and invoke fixup callback. This change has paassed debugobjects selftest, and I also do some test with all debugobjects supports enabled. At last, I have a concern about the fixups that can it change the object which is in incorrect state on fixup? Because the 'addr' may not point to any valid object if a non-static object is not tracked. Then Change such object can overwrite someone's memory and cause unexpected behaviour. For example, the timer_fixup_activate bind timer to function stub_timer. Link: http://lkml.kernel.org/r/1462576157-14539-1-git-send-email-changbin.du@intel.com [changbin.du@intel.com: improve code comments where invoke the new is_static_object callback] Link: http://lkml.kernel.org/r/1462777431-8171-1-git-send-email-changbin.du@intel.comSigned-off-by:
Du, Changbin <changbin.du@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Triplett <josh@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tejun Heo <tj@kernel.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Du, Changbin authored
Update documentation creangponding to change(debugobjects: make fixup functions return bool instead of int). Signed-off-by:
-
Du, Changbin authored
Update the return type to use bool instead of int, corresponding to cheange (debugobjects: make fixup functions return bool instead of int). Signed-off-by:
-
Du, Changbin authored
Update the return type to use bool instead of int, corresponding to cheange (debugobjects: make fixup functions return bool instead of int). Signed-off-by:
-
Du, Changbin authored
Update the return type to use bool instead of int, corresponding to cheange (debugobjects: make fixup functions return bool instead of int). Signed-off-by:
-
Du, Changbin authored
Update the return type to use bool instead of int, corresponding to change (debugobjects: make fixup functions return bool instead of int) Signed-off-by:
-
Du, Changbin authored
If debug_object_fixup() return non-zero when problem has been fixed. But the code got it backwards, it taks 0 as fixup successfully. So fix it. Signed-off-by:
-
Du, Changbin authored
I am going to introduce debugobjects infrastructure to USB subsystem. But before this, I found the code of debugobjects could be improved. This patchset will make fixup functions return bool type instead of int. Because fixup only need report success or no. boolean is the 'real' type. This patch (of 7): The object debugging infrastructure core provides some fixup callbacks for the subsystem who use it. These callbacks are called from the debug code whenever a problem in debug_object_init is detected. And debugobjects core suppose them returns 1 when the fixup was successful, otherwise 0. So the return type is boolean. A bad thing is that debug_object_fixup use the return value for arithmetic operation. It confused me that what is the reall return type. Reading over the whole code, I found some place do use the return value incorrectly(see next patch). So why use bool type instead? Signed-off-by:
-
Vineet Gupta authored
This adds an additional line of output (to reduce the chances of breaking any existing output parsers) which prints the total size before and after and the relative difference. add/remove: 39/0 grow/shrink: 12408/55 up/down: 362227/-1430 (360797) function old new delta ext4_fill_super 10556 12590 +2034 _fpadd_parts - 1186 +1186 ntfs_fill_super 5340 6164 +824 ... ... __divdf3 752 386 -366 unlzma 3682 3274 -408 Total: Before=5023101, After=5383898, chg 7.000000% ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Link: http://lkml.kernel.org/r/1463124110-30314-1-git-send-email-vgupta@synopsys.comSigned-off-by:
Vineet Gupta <vgupta@synopsys.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Kees Cook authored
A few instances of "fimware" instead of "firmware" were found. Fix these and add it to the spelling.txt file. Signed-off-by:
Kees Cook <keescook@chromium.org> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Konstantin Khlebnikov authored
scripts/decode_stacktrace.sh presently displays module symbols as func+0x0ff/0x5153 [module] Add a third argument: the pathname of a directory where the script should look for the file module.ko so that the output appears as func (foo/bar.c:123) module Without the argument or if the module file isn't found the script prints such symbols as is without decoding. Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Deepa Dinamani authored
All references to timespec_add_safe() now use timespec64_add_safe(). The plan is to replace struct timespec references with struct timespec64 throughout the kernel as timespec is not y2038 safe. Drop timespec_add_safe() and use timespec64_add_safe() for all architectures. Link: http://lkml.kernel.org/r/1461947989-21926-4-git-send-email-deepa.kernel@gmail.comSigned-off-by:
Deepa Dinamani <deepa.kernel@gmail.com> Acked-by:
John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Deepa Dinamani authored
struct timespec is not y2038 safe. Even though timespec might be sufficient to represent timeouts, use struct timespec64 here as the plan is to get rid of all timespec reference in the kernel. The patch transitions the common functions: poll_select_set_timeout() and select_estimate_accuracy() to use timespec64. And, all the syscalls that use these functions are transitioned in the same patch. The restart block parameters for poll uses monotonic time. Use timespec64 here as well to assign timeout value. This parameter in the restart block need not change because this only holds the monotonic timestamp at which timeout should occur. And, unsigned long data type should be big enough for this timestamp. The system call interfaces will be handled in a separate series. Compat interfaces need not change as timespec64 is an alias to struct timespec on a 64 bit system. Link: http://lkml.kernel.org/r/1461947989-21926-3-git-send-email-deepa.kernel@gmail.comSigned-off-by:
David S. Miller <davem@davemloft.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Deepa Dinamani authored
timespec64_add_safe() has been defined in time64.h for 64 bit systems. But, 32 bit systems only have an extern function prototype defined. Provide a definition for the above function. The function will be necessary as part of y2038 changes. struct timespec is not y2038 safe. All references to timespec will be replaced by struct timespec64. The function is meant to be a replacement for timespec_add_safe(). The implementation is similar to timespec_add_safe(). Link: http://lkml.kernel.org/r/1461947989-21926-2-git-send-email-deepa.kernel@gmail.comSigned-off-by:
-
Jan Kara authored
Inotify instance is destroyed when all references to it are dropped. That not only means that the corresponding file descriptor needs to be closed but also that all corresponding instance marks are freed (as each mark holds a reference to the inotify instance). However marks are freed only after SRCU period ends which can take some time and thus if user rapidly creates and frees inotify instances, number of existing inotify instances can exceed max_user_instances limit although from user point of view there is always at most one existing instance. Thus inotify_init() returns EMFILE error which is hard to justify from user point of view. This problem is exposed by LTP inotify06 testcase on some machines. We fix the problem by making sure all group marks are properly freed while destroying inotify instance. We wait for SRCU period to end in that path anyway since we have to make sure there is no event being added to the instance while we are tearing down the instance. So it takes only some plumbing to allow for marks to be destroyed in that path as well and not from a dedicated work item. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Jan Kara <jack@suse.cz> Reported-by:
Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com> Tested-by:
-
- 19 May, 2016 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: "This includes two new updates for the ftrace infrastructure. - With the changing of the code for filtering events by pid, from a list of pids to a bitmask, we can now easily implement following forks. With a new tracing option "event-fork" which, when set, will have tasks with pids in set_event_pid, when they fork, to have their child pids added to set_event_pid and the child will be traced as well. Note, if "event-fork" is set and a task with its pid in set_event_pid exits, its pid will be removed from set_event_pid - The addition of Tom Zanussi's hist triggers. This includes a very thorough documentatino on how to use the hist triggers with events. This introduces a quick and easy way to get histogram data from events and their fields. Some other cleanups and updates were added as well. Like Masami Hiramatsu added test cases for the event trigger and hist triggers. Also I added a speed up of filtering by using a temp buffer when filters are set" * tag 'trace-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits) tracing: Use temp buffer when filtering events tracing: Remove TRACE_EVENT_FL_USE_CALL_FILTER logic tracing: Remove unused function trace_current_buffer_lock_reserve() tracing: Remove one use of trace_current_buffer_lock_reserve() tracing: Have trace_buffer_unlock_commit() call the _regs version with NULL tracing: Remove unused function trace_current_buffer_discard_commit() tracing: Move trace_buffer_unlock_commit{_regs}() to local header tracing: Fold filter_check_discard() into its only user tracing: Make filter_check_discard() local tracing: Move event_trigger_unlock_commit{_regs}() to local header tracing: Don't use the address of the buffer array name in copy_from_user tracing: Handle tracing_map_alloc_elts() error path correctly tracing: Add check for NULL event field when creating hist field tracing: checking for NULL instead of IS_ERR() tracing: Do not inherit event-fork option for instances tracing: Fix unsigned comparison to zero in hist trigger code kselftests/ftrace: Add a test for log2 modifier of hist trigger tracing: Add hist trigger 'log2' modifier kselftests/ftrace: Add hist trigger testcases kselftests/ftrace : Add event trigger testcases ... -
git://git.infradead.org/users/pcmoore/auditLinus Torvalds authored
Pull audit updates from Paul Moore: "Four small audit patches for 4.7. Two are simple cleanups around the audit thread management code, one adds a tty field to AUDIT_LOGIN events, and the final patch makes tty_name() usable regardless of CONFIG_TTY. Nothing controversial, and it all passes our regression test" * 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit: tty: provide tty_name() even without CONFIG_TTY audit: add tty field to LOGIN event audit: we don't need to __set_current_state(TASK_RUNNING) audit: cleanup prune_tree_thread
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "Introduce a synchronization point between the async firmware loading and clients requesting the remote processor to boot, as well as support for remote processors that are not interested in the resource table information" * tag 'rproc-v4.7' of git://github.com/andersson/remoteproc: remoteproc: Add additional crash reasons remoteproc: core: Make the loaded resource table optional remoteproc: core: Task sync during rproc_fw_boot()
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "Refactor rpmsg module registration to follow other subsystems; by introduction of module_rpmsg_driver and hiding of THIS_MODULE from clients" * tag 'rpmsg-v4.7' of git://github.com/andersson/remoteproc: rpmsg: use module_rpmsg_driver in existing drivers and examples rpmsg: add helper macro module_rpmsg_driver rpmsg: drop owner assignment from rpmsg_drivers rpmsg: add THIS_MODULE to rpmsg_driver in rpmsg core
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "First round of updates for the input subsystem. No new drivers here, just some driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: rotary-encoder - fix bare use of 'unsigned' Input: cm109 - spin_lock in complete() cleanup Input: cm109 - fix handling of volume and mute buttons Input: byd - don't wipe dynamically allocated memory twice Input: twl4030 - fix unsafe macro definition Input: twl6040-vibra - remove mutex Input: bcm_iproc_tsc - DT spelling s/clock-name/clock-names/ Input: bcm_iproc_tsc - use syscon to access shared registers Input: ti_am335x_tsc - use SIMPLE_DEV_PM_OPS Input: omap-keypad - remove set_col_gpio_val() and get_row_gpio_val() Input: omap-keypad - drop empty PM stubs Input: omap-keypad - remove adjusting of scan delay Input: gpio-keys - clean up device tree binding example Input: kbtab - stop saving struct usb_device Input: gtco - stop saving struct usb_device Input: aiptek - stop saving struct usb_device Input: acecad - stop saving struct usb_device
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: - added support for Intersil/Techwell TW686x-based video capture cards - v4l PCI skeleton driver moved to samples directory - Documentation cleanups and improvements - RC: reduced the memory footprint for IR raw events - tpg: Export the tpg code from vivid as a module - adv7180: Add device tree binding documentation - lots of driver improvements and fixes * tag 'media/v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (173 commits) [media] exynos-gsc: avoid build warning without CONFIG_OF [media] samples: v4l: from Documentation to samples directory [media] dib0700: add USB ID for another STK8096-PVR ref design based card [media] tvp5150: propagate I2C write error in .s_register callback [media] tvp5150: return I2C write operation failure to callers [media] em28xx: add support for Hauppauge WinTV-dualHD DVB tuner [media] em28xx: add missing USB IDs [media] update cx23885 and em28xx cardlists [media] media: au0828 fix au0828_v4l2_device_register() to not unlock and free [media] c8sectpfe: Rework firmware loading mechanism [media] c8sectpfe: Demote print to dev_dbg [media] c8sectpfe: Fix broken circular buffer wp management [media] media-device: Simplify compat32 logic [media] media: i2c: ths7303: remove redundant assignment on bt [media] dvb-usb: hide unused functions [media] xilinx-vipp: remove unnecessary of_node_put [media] drivers/media/media-devnode: clear private_data before put_device() [media] drivers/media/media-device: move debug log before _devnode_unregister() [media] drivers/media/rc: postpone kfree(rc_dev) [media] media/dvb-core: forward media_create_pad_links() return value ...
-
- 18 May, 2016 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "First round of SCSI updates for the 4.6+ merge window. This batch includes the usual quota of driver updates (bnx2fc, mp3sas, hpsa, ncr5380, lpfc, hisi_sas, snic, aacraid, megaraid_sas). There's also a multiqueue update for scsi_debug, assorted bug fixes and a few other minor updates (refactor of scsi_sg_pools into generic code, alua and VPD updates, and struct timeval conversions)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits) mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMs mpt3sas: Set maximum transfer length per IO to 4MB for VDs mpt3sas: Updating mpt3sas driver version to 13.100.00.00 mpt3sas: Fix initial Reference tag field for 4K PI drives. mpt3sas: Handle active cable exception event mpt3sas: Update MPI header to 2.00.42 Revert "lpfc: Delete unnecessary checks before the function call mempool_destroy" eata_pio: missing break statement hpsa: Fix type ZBC conditional checks scsi_lib: Decode T10 vendor IDs scsi_dh_alua: do not fail for unknown VPD identification scsi_debug: use locally assigned naa scsi_debug: uuid for lu name scsi_debug: vpd and mode page work scsi_debug: add multiple queue support bfa: fix bfa_fcb_itnim_alloc() error handling megaraid_sas: Downgrade two success messages to info cxlflash: Fix to resolve dead-lock during EEH recovery scsi_debug: rework resp_report_luns scsi_debug: use pdt constants ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibftLinus Torvalds authored
Pull iscsi_ibft updates from Konrad Rzeszutek Wilk: "The pull has two features - both of them expand the SysFS entries: - 'prefix-len' - which is subnet_mask_prefix of the iBFT header. - 'acpi_header' dir with: 'iBFT', OEM-ID (whatever it extracts from the iBFT header) and OEM_TABLE_ID (also whatever it extracts from the iBFT header). This is to help NIC drivers to figure out during bootup how to deal with BIOS created iBFT tables (like by TianoCore UEFI implemenation)" * 'stable/for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: ibft: Expose iBFT acpi header via sysfs iscsi_ibft: Add prefix-len attr and display netmask -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons. For the most part, this is now related to power management controllers, which have not yet been abstracted into a separate subsystem, and typically require some code in drivers/soc or arch/arm to control the power domains. Another large chunk here is a rework of the NVIDIA Tegra USB3.0 support, which was surprisingly tricky and took a long time to get done. Finally, reset controller handling as always gets merged through here as well" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) arm-ccn: Enable building as module soc/tegra: pmc: Add generic PM domain support usb: xhci: tegra: Add Tegra210 support usb: xhci: Add NVIDIA Tegra XUSB controller driver dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding PCI: tegra: Support per-lane PHYs dt-bindings: pci: tegra: Update for per-lane PHYs phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs drivers: firmware: psci: make two helper functions inline soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC defconfig updates from Arnd Bergmann: "As usual, a bunch of commits, mostly adding drivers and other options to defconfigs. We are adding three new defconfig files for the newly added 32-bit machines (aspeed and mps2), the rest is mainly housekeeping. The changes outside of arch/arm/config/ are for a Kconfig symbol that got renamed" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits) ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME ARM: u8500_defconfig: update sensor config ARM: u8500_defconfig: remove staging from defconfig ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT ARM: at91/defconfig: sama5: add CONFIG_FHANDLE arm/configs: Add Aspeed defconfig arm/configs/multi_v5: Add Aspeed ast2400 ARM: at91: sama5: Update defconfig ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO ARM: multi_v7: Enable Tegra XUSB controller in defconfig ARM: tegra: Enable XUSB controller in defconfig ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver ARM: multi_v7_defconfig: add Atmel watchdog timers ARM: multi_v7_defconfig: add HLCDC drivers as modules ARM: at91/defconfig: add PDMIC driver to sama5_defconfig ARM: at91/defconfig: add HLCDC driver to sama5_defconfig ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM 64-bit DT updates from Arnd Bergmann: "We continue ramping up platform support for 64-bit ARM machines, with 111 individual non-merge changesets touching 21 platforms. The LG1312 platform is completely new and is the first ARM platform by LG that we support in the mainline kernel. Two other SoCs got added that are updated versions of existing SoC families, so the port mainly consists of new dts files: - The Hisilicon Hip06/D03 is the latest server platform from Huawei/Hisilicon, and follows the Hip05/D02 platform. - Rockchip RK3399 follows the 32-bit RK3288 that is popular in low-end Chromebooks and the 64-bit RK3368 that is mainly found in chinese Android TV boxes. The 96Boards HiKey based on the Hisilicon Hi6220 (Kirin 620) gets a long-awaited overhaul with a lot of devices enabled in the DT, so it should be much more usable with a mainline kernel now. See also https://plus.google.com/111524780435806926688/posts/PeGb2VsNhJd A lot of work went into enabling new device drivers on existing machines, but we also have a couple of new commercially available machines: - Google Pixel C laptop based on Tegra210 - Hardkernel Odroid C2 Based on Amlogic Meson GXBB (S905) - Geekbuying GeekBox based on Rockchip RK3368 And finally, a couple of reference or development platforms that are not end-user platforms but are used for trying out the respective SoC platforms: - Amlogic Meson GXBB P200 and P201 development systems - NXP Layerscape 1043A QDS development board - Hisilicon Hip06 D03 server board, as mentioned above - LG1312 Reference Design - RK3399 Evaluation Board" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits) arm64: dts: marvell: add XOR node for Armada 3700 SoC dt-bindings: document rockchip rk3399-evb board arm64: dts: rockchip: add dts file for RK3399 evaluation board arm64: dts: rockchip: add core dtsi file for RK3399 SoCs dt-bindings: rockchip-dw-mshc: add description for rk3399 arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xx arm64: dts: marvell: Rename armada-37xx USB node arm64: dts: marvell: Clean up armada-3720-db Documentation: arm64: Add Hisilicon Hip06 D03 dts binding arm64: dts: Add initial dts for Hisilicon Hip06 D03 board arm64: dts: hip05: Add nor flash support arm64: dts: hip05: fix its node without msi-cells arm64: dts: r8a7795: Don't disable referenced optional clocks arm64: dts: salvator-x: populate EXTALR arm64: dts: r8a7795: enable PCIe on Salvator-X arm64: dts: r8a7795: Add PCIe nodes arm64: tegra: Add IOMMU node to GM20B on Tegra210 arm64: tegra: Add reference clock to GM20B on Tegra210 dt-bindings: Add documentation for GM20B GPU dt-bindings: gk20a: Document iommus property ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM DT updates from Arnd Bergmann: "These are all the updates to device tree files for 32-bit platforms, which as usual makes up the bulk of the ARM SoC changes: 462 non-merge changesets, 450 files changed, 23340 insertions, 5216 deletions. The three platforms that are added with the "soc" branch are here as well, and we add some related machine files: - For Aspeed AST2400/AST2500, we get the evaluation platform and the Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC - For Oxnas 810SE, the Western Digital "My Book World Edition" is added as the only platform at the moment. - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are supported On the ARM Realview development platform, we now support all machines with device tree, previously only the board files were supported, which in turn will likely be removed soon. Qualcomm IPQ4019 is the second generation ARM based "Internet Processor", following the IPQ806x that is used in many high-end WiFi routers. This one integrates two ath10k wifi radios that were previously on separate chips. Other boards that got added for existing chips are: Ti OMAP family: - Amazon Kindle Fire, first generation, tablet and ebook reader - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM development systems Samsung EXYNOS platform: - Samsung ARTIK5 evaluation board, see https://www.artik.io/modules/overview/artik-5/ NXP i.MX platforms: - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx, TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial SoM modules - Embest MarS Board i.MX6Dual DIY platform - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX Nitrogen6sx embedded boards - Technexion Pico i.MX6UL compute module - ZII VF610 Development Board Marvell embedded (mvebu, orion, kirkwood) platforms: - Linksys Viper (E4200v2 / EA4500) WiFi router - Buffalo Kurobox Pro NAS Qualcomm Snapdragon: - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600 Rockchips platform: - mqmaker MiQi single-board computer Altera SoCFPGA: - samtec VIN|ING 1000 vehicle communication interface Allwinner Sunxi platforms: - Dserve DSRV9703C tablet - Difrnce DIT4350 tablet - Colorfly E708 Q1 tablet - Polaroid MID2809PXE04 tablet - Olimex A20 OLinuXino LIME2 single board computer - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board computers Across many platforms, bug fixes went in to address warnings that dtc now emits with 'make dtbs W=1'. Further changes for device enablement went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM Versatile Express" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits) ARM: dts: tango4: Import watchdog node ARM: dts: tango4: Update cpus node for cpufreq ARM: dts: tango4: Update DT to match clk driver ARM: dts: tango4: Initial thermal support arm/dst: Add Aspeed ast2500 device tree arm/dts: Add Aspeed ast2400 device tree ARM: sun7i: dt: Add pll3 and pll7 clocks ARM: dts: sunxi: Add a olinuxino-lime2-emmc ARM: dts: at91: sama5d4: add trng node ARM: dts: at91: sama5d3: add trng node ARM: dts: at91: sama5d2: add trng node ARM: dts: at91: at91sam9g45 family: reduce the trng register map size ARM: sun4i: dt: Add pll3 and pll7 clocks ARM: sun5i: chip: Enable the TV Encoder ARM: sun5i: r8: Add display blocks to the DTSI ARM: sun5i: a13: Add display and TCON clocks ARM: dts: ux500: configure the accelerometers open drain ARM: mx5: dts: Enable USB OTG on M53EVK ARM: dts: imx6ul-14x14-evk: Add audio support ARM: dts: imx6qdl: Remove unneeded unit-addresses ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC 64-bit changes from Arnd Bergmann: "One new platform gets added this time: The Cortex-A53 based LG Electronics LG1K platform used in digital TVs. The other changes are mostly smaller updates to the defconfig files, to enable additional platform specific drivers, as they get merged through the subsystem trees" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: configs: add options useful for Armada 7K/8K support arm64: defconfig: Add Juno SATA controller arm64: defconfig: enable freescale/nxp config options arm64: defconfig: enable 48-bit virtual addresses arm64: defconfig: cleanup the defconfig MAINTAINERS: update entry for Marvell ARM platform maintainers arm64: marvell: enable AP806 and CP110 syscon driver arm64: Kconfig: select sp804 timer for ARCH_HISI arm64: defconfig: enable configs for WLAN and TI WL1835 as modules arm64: defconfig: enable several common USB network adapters arm64: defconfig: add CONFIG_SPI_SPIDEV as module arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey arm64: defconfig: Add Renesas R-Car USB 3.0 driver support MAINTAINERS: add Chanho Min as ARM/LG1K maintainer arm64: defconfig: enable ARCH_LG1K arm64: add Kconfig entry for LG1K SoC family arm64: defconfig: Enable PL330 DMA controller arm64: defconfig: enable basic boot for Amlogic meson
-
