- 03 Aug, 2010 1 commit
-
-
Jerone Young authored
ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF The Lenovo X301 does not have the ability to connect to a docking station to use the SPDIF port. It also does not have the ability to do SPDIF though the headphone jack or Display Port jacks. This patch fixes it so this is not exposed for the X301 and users do think it has the ability to do SPDIF. I tested both headphone & display port jacks and it is not there. I have tested this patch and it works great. Also to add the other Thinkpads have different subsystem codec IDs. Here are examples: X301: http://launchpadlibrarian.net/31561902/Card0.Codecs.codec.0.txt X200: http://launchpadlibrarian.net/49055036/Card0.Codecs.codec.0.txt W500: http://launchpadlibrarian.net/36276057/Card0.Codecs.codec.0.txtSigned-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 02 Aug, 2010 1 commit
-
-
David Henningsson authored
Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 30 Jul, 2010 8 commits
-
-
Takashi Iwai authored
The current ALC259/268/269 parser ignores some pins as unhandled, but user won't notice what goes wrong. So, added a warning message for the ignored pins as a hint. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The pin NID 0x1a should be handled as well as NID 0x1b. Also added comments. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Call snd_hda_shutup_pins() for power-saving and reboot-notifier in patch_conexant.c as well as other codecs. This will reduce the pop noise in power-save mode. Reference: bnc#624896 https://bugzilla.novell.com/show_bug.cgi?id=624896Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
If BIOS sets up the input pin as VREF 50, use the value as is instead of overriding forcibly to VREF 80. This fixes the quality of inputs on some devices like Packard-Bell M5210. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Since ALC259/269 use the same parser of ALC268, the pin 0x1b was ignored as an invalid widget. Just add this NID to handle properly. This will add the missing mixer controls for some devices. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Make a helper function to parse the digital I/Os of all Realtek codecs to simplify the code and to ensure the setups. Also, initialize digital I/O pins properly in init callbacks. Some BIOS seem to leave pins uninitialized. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Some ALC662-compatible codecs like ALC892 may have more than 4 connections for the input source. Use HDA_MAX_CONNECTIONS instead of the fixed magic number 4. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Add a prefix and more information for error messages regarding the connection-list in hda_codec.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 29 Jul, 2010 3 commits
-
-
David Henningsson authored
The non-standard name "iMic" makes PulseAudio ignore the microphone. BugLink: https://launchpad.net/bugs/605101Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Takashi Iwai authored
ASUS P5-V provides a SSID that unexpectedly matches with the value compilant with Realtek's specification. Thus the driver interprets it badly, resulting in non-working PC beep. This patch adds a white-list for such a case; a white-list of known devices with working PC beep. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 28 Jul, 2010 4 commits
-
-
Takashi Iwai authored
Enable PC-beep as default for hardwares that aren't compliant with the SSID value Realtek requires. In such a case, better to enable the beep to avoid a regression. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
We check now the availability of PC beep and skip the build of beep mixers, but the driver still registers the input device. This should be checked as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Takashi Iwai authored
The behavior of Nvidia HDMI codec regarding the pin-detection unsol events is based on the old HD-audio spec, i.e. PD bit indicates only the update and doesn't show the current state. Since the current code assumes the new behavior, the pin-detection doesn't work relialby with these h/w. This patch adds a flag for indicating the old spec, and fixes the issue by checking the pin-detection explicitly for such hardware. Tested-by: Wei Ni <wni@nvidia.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 26 Jul, 2010 2 commits
-
-
Takashi Iwai authored
The commit afbd9b84 ALSA: hda - Limit the amp value to write introduced a regression for codec setups with amp offsets like IDT/STAC codecs. The limit value should be a raw value without offset calculation. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
David Henningsson authored
Signed-off-by: David Henningsson <diwic@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 19 Jul, 2010 1 commit
-
-
Jerone Young authored
This is a follow on patch adds support for AMD based Lenovo G series machines, such as the Lenovo G555. Signed-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 13 Jul, 2010 1 commit
-
-
Takashi Iwai authored
Some VAIO models with ALC275 have dual ADCs for both internal and external mics, and the driver needs to switch one of them appropriately. This patch adds a basic support for this functionality, dynamic switching between two ADCs per jack plug state. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 12 Jul, 2010 1 commit
-
-
Clemens Ladisch authored
Correctly configure bidirectional pins when resuming; do not power down widgets when they are needed for Smart5.1 output; and on 3-jack boards, create the streams and controls needed for six channels. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-and-tested-by: Viliam Kubis <viliam.kubis@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 09 Jul, 2010 4 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
Check the amp max value at put callbacks and set the upper limit so that the driver won't write any invalid value over the defined range. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Added the beep mixer controls to Conexant codecs. They simply control the digital beep generator widget. For cx5047, I couldn't find any beep generator, so it's not implemented there. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Many codecs now clear the pin controls at suspend via snd_hda_shutup_pins() for reducing the click noise at power-off. But this leaves some pins uninitialized, and they'll be never recovered after resume. This patch adds the proper recovery of cleared pin controls on resume. Also it adds a check of bus->shutdown so that pins won't be cleared at module unloading. Reference: Kernel bug 16339 http://bugzilla.kernel.org/show_bug.cgi?id=16339 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 05 Jul, 2010 1 commit
-
-
Takashi Iwai authored
When the PCI SSID gives an overriding SKU assno, PC-beep bit isn't detected (since it's located over 16bit), resulting in no PC beep. Also, many devices seem ignoring the requirement by Realtek's spec for SSID numbers, and it also confuses the PC beep detection. This patch assumes the PC beep is available on every machine with PCI SSID override. It's a regression fix from 2.6.34. Reference: Kernel bug 16251 http://bugzilla.kernel.org/show_bug.cgi?id=16251Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 23 Jun, 2010 2 commits
-
-
Takashi Iwai authored
Also update the documentation. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 22 Jun, 2010 2 commits
-
-
Luke Yelavich authored
BugLink: https://bugs.launchpad.net/bugs/463178 Set Macbook 5,2 (106b:4a00) hardware to use ALC885_MB5 Cc: <stable@kernel.org> Signed-off-by: Luke Yelavich <luke.yelavich@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Fix the following compile warning. kctl should be NULL-initialized. sound/pci/hda/patch_realtek.c: In function ‘alc_build_controls’: sound/pci/hda/patch_realtek.c:2550:23: warning: ‘kctl’ may be used uninitialized in this function Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 17 Jun, 2010 1 commit
-
-
Herton Ronaldo Krzesinski authored
Lenovo IdeaPad Y430 has an additional subwoofer connected at pin 0x1b, which isn't muted when headphone is plugged in. This adds additional support to the extra subwoofer via new ideapad model. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 Jun, 2010 1 commit
-
-
Alex Murray authored
The line-in input is 0x7 not 0x2 for MacBook (Pro) 5,1 / 5,2 models Signed-off-by: Alex Murray <murray.alex@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 11 Jun, 2010 1 commit
-
-
Takashi Iwai authored
With multiple codec configurations, some codec might have no ADC, thus it keeps spec->adc_nids = NULL. This causes an Oops in alc_build_controls(). Reference: kernel bug #16156 https://bugzilla.kernel.org/show_bug.cgi?id=16156 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 08 Jun, 2010 3 commits
-
-
Justin P. Mattock authored
This patch add's the iMac7,1 SSID entry to patch_realtek.c which adds sound support. bug entry: https://bugs.launchpad.net/mactel-support/+bug/360866 Note:I do not have this machine on hand only codec#0 file for the machine so please test if you have the appropriate equipment. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Justin P. Mattock authored
This patch add's the MacBookAir1,1 SSID entry to patch_realtek.c which adds sound support. bug entry: https://bugs.launchpad.net/mactel-support/+bug/268301 Note:I do not have this machine on hand only codec#0 file for the machine so please test if you have the appropriate equipment. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Justin P. Mattock authored
This adds the SSID number to snd_pci_quirk for the MacBookAir2,1 taken from codec#0 at: http://launchpadlibrarian.net/49455483/Card0.Codecs.codec.0.txt keep in mind I do not have one of these machines on hand so please if you do have this machine please test for me.. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 06 Jun, 2010 2 commits
-
-
Linus Torvalds authored
-
Chris Wilson authored
Cursors need to be in the GTT domain when being accessed by the GPU. Previously this was a fortuitous byproduct of userspace using pwrite() to upload the image data into the cursor. The redundant clflush was removed in commit 9b8c4a and so the image was no longer being flushed out of the caches into main memory. One could also devise a scenario where the cursor was rendered by the GPU, prior to being attached as the cursor, resulting in similar corruption due to the missing MI_FLUSH. Fixes: Bug 28335 - Cursor corruption caused by commit 9b8c4a0b https://bugs.freedesktop.org/show_bug.cgi?id=28335Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 05 Jun, 2010 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix remaining racy updates of EXT4_I(inode)->i_flags ext4: Make sure the MOVE_EXT ioctl can't overwrite append-only files
-